Small Block Chevy Heater Hose Locations!!!

Рет қаралды 23,401

Rocker Pat

4 жыл бұрын

Helping Andy's Dog House with finding his heater hose connection locations!!! Thanks for watching and Keep Rocking!!!

Пікірлер: 37

@ViewThis. 4 жыл бұрын

0:48 ---> 1:05 I've been looking for this bit of information, presented this way and this simply for quite a long time. Out from the intake manifold, into the heater core, out of the heater core into the Nub on top of the water pump. (SBC) That Nub on top of the water pump is a sucker. THANKS !! Everyone else gives a complicated confusing description

@KGisthename 2 жыл бұрын

For real

@AndysDogHouse 4 жыл бұрын

He Brother. You are a great friend to help me out with all of my issues. A couple of my other KZfaq friends messaged me on this matter as well. Bubba, over at TheCanadianBubba site and Ron over at Ron'sGarage have eagle eyes. They saw a threaded hole in my last video that I will use for my heater. It is tucked between the alternator and the thermostat housing and behind the alternator bracket. I really thank you for going through all the time and effort to help me out. Don't stop. I'm not done your Automotive classes. Keep on A Rock'n an A Roll'n.👍👍

@jankotze1959 4 жыл бұрын

Great video, awesome and thanks for sharing

@joeroyalgarage7995 4 жыл бұрын

I just learned something!! Thanks for the tip pat!!

@EJsGuitars 4 жыл бұрын

My wheelhouse!🤘🏼 Awesome stuff dude!😎

@Jason1Pa 4 жыл бұрын

Good explanation Pat 👍

@jthetunes1 2 жыл бұрын

I've been looking for this exact answer thank you so much

@rockerpat1085 2 жыл бұрын

Well I hope That Info Warms You Right Up!!! I'm full of all sorts of useful or useless information!!! Thanks for Watching and Keep Rocking!!!

@jthetunes1 2 жыл бұрын

Took me longer to run to three different parts store because they didn't have the threaded fittings then it did to install the heater! Went with the jegs 40000 btu unit and it cranks. The truck is a Frankenstein, 98 Hummer H1 body with a 89 chevy 2500 chassis. Heat was completely delete by the original builder and the old heater core lines weren't there. Once I saw this video it was a piece of cake! I liked and subscribed man thanks again!

@zangetsuslayingmoon8884 6 ай бұрын

Thank you

@RustyGlovebox 4 жыл бұрын

And that’s the fact Jack 👍

@SV-pt9qw 3 жыл бұрын

Intake has 1 for heater outlet to core , other side is temp sending unit I believe

@TheCanadianBubba 4 жыл бұрын

Andy messaged me earlier, he did find it !

@ziggassedup 4 жыл бұрын

I'm guessing Andy is new at this Pat...Nice to help 'em a bit isn't it.

@AndysDogHouse 4 жыл бұрын

Hey ZIGgassedUp. I am really new at this. I am retired and want something to do, so I bought an old truck to fix up and I was way over my head. I am having tons of fun and met lots of nice people through KZfaq that are more than happy to help me with my build. Pat is my main mentor and saviour with this. Drop around to the Dog House and see how he is helping me. 👍👍

@orlandopintor7596 Жыл бұрын

@jamesmcleodjr.7521 8 ай бұрын

Nope. 5/8 fitting goes into the manifold. The 3/4 goes into the water pump.

@KGisthename 2 жыл бұрын

Hey bud what about the port behind the carb? There is another one on my edelbrock performer between my dizzy and carb. Thanks.

@rustyrods8535 4 жыл бұрын

Never seen a intake without a heater hose threaded hole ...could be for short track racing ? ....Or some other type racing ? .

@xNGaage 22 күн бұрын

What if you aren’t running a heater core? Can you block those ports?

@rockerpat1085 22 күн бұрын

Yes

@ScottRods 4 жыл бұрын

hahaha, Canadistan. Consider yourself schooled Andy lol.

@AndysDogHouse 4 жыл бұрын

Ha-Ha-. It's not the first time Pat schooled me.

@RCbasheracer Жыл бұрын

Isnt it. 5/8” hose comimg out intake & 3/4” into water pump.

@baxterlou Жыл бұрын

What if your running a serp setup that doesn't have a fitting at the waterpump??????

@rockerpat1085 Жыл бұрын

Heater Core Returns Directly To The Radiator!!! Thanks for Watching and Keep Rocking!!!

@baxterlou Жыл бұрын

@Rocker Pat it's a 36 chevy with no return port in the rad. LOL. Wanna try again?

@baxterlou Жыл бұрын

That's what I thought. In the "perfect" world, when using an engine that came in the vehicle your working on, it's easy and any kid can do it. Maybe concentrate on explaining alternative return options when building something custom.

@rockerpat1085 Жыл бұрын

@@baxterlou Look Hear Dick Head I Didn't Come To Your Ass And Ask You A Fucking Thing, But You Came To Me And Now You Want To Start A Fight? You Can Shove The Hose Up Your Ass For All I Give A Damn!!!!

@TiK2theToK Жыл бұрын

I have a 1964 impala 327. The hose from the pump is connected to the manifold. And the ports from the heater core are just bare nothing connected . Lol Wtf? I bought it that way