Small Plaster & Silicone Molds for ceramics

Small Plaster & Silicone Molds for ceramics - how to avoid undercuts!

Рет қаралды 63,636

Күн бұрын

Curious about the process of making plaster molds for ceramics & slip casting? Looking for an easy project to dip your toes into making molds? Well, today’s Tiki Technical Tuesday is for you! Gather round and watch as I make a plaster mold of a simple small toy to use as a glaze tester in the studio. Learn all about undercuts, seam lines, and some great tricks when molding small objects. We cover mold prep, building mold walls, adding keys, and releasing with mold soap. Lots and lots of mold soap!
Thank you all for watching Tiki Technical Tuesday - As always, put questions in the comments and I'll do my best to answer. If you haven’t subscribed yet - please do!
VanTiki's web and social pages: linktr.ee/vantiki
Links! (please note, I'm using the Amazon affiliate program - If you buy something via these links I may get a small share of the sale)
The Essential Guide to Mold Making & Slip Casting amzn.to/3q2rkP1
Snap Ring Pliers (for opening molds) amzn.to/2YY0WtD
Kreg K5 pocket Hole jig amzn.to/2N9T0CQ
Drywall sanding screen amzn.to/3GB2KyX
Murphy’s Oil Soap amzn.to/3KMTZUS
Chapters:
00:00 - Introduction
02:19 - What are Undercuts?
06:15 - Plaster Mold Side 1 Prep
13:19 - Pouring Plaster!
16:51 - Plaster Mold Side 2
25:06 - Plaster Mold Opening & Cleaning
38:45 - Silicone Mold!

Пікірлер: 215

@featherorknot 11 ай бұрын

Found this video randomly out of boredom, and general mold making interest. 8 minutes in and all I can think is "wow this guy and his video production remind me of Alton Brown"... needless to say - I'm now subscribed 😄

@vantikistudio 11 ай бұрын

Thank you for subscribing! I’m glad KZfaq pointed you in my direction

@JordanReynoldsx 2 ай бұрын

I thought the exact same thing while watching. The close-up/slightly angled shots with great levels of enthusiasm really channels Alton Brown. Love the work!

@tracyguimond9353 15 күн бұрын

Same !!

@danielleworley9112 Ай бұрын

I’ve watched and read so much today and this is the one video that’s really made sense in a “now I can do this” way. Conveniently a little toy is what I really want to slip cast first so this is extra helpful.

@vantikistudio Ай бұрын

I’m so glad it helped your mug journey!

@ProfessionalJason Жыл бұрын

"I'm going to do something special for the 10,000th episode." I really do hope you make that many videos.

@vantikistudio Жыл бұрын

Ha! I caught that flub in the editing - that would be a lot of episodes!

@JohnKelly2 Жыл бұрын

Yay! Tiki Technical Tuesday! I minored in ceramics in college, accidentally, but we never made molds. Now, 25 years later, I'm wanting to make stuff again. Your channel has been great for both instruction and motivation. If you're wondering who's been binging your videos, it's me. Thanks so much!

@vantikistudio Жыл бұрын

Thank you so much for binging! I’m so glad you found the channel!

@royschuchmann3886 Жыл бұрын

I write comments so rarely, but I couldn't help myself. You are a natural teacher. You are funny and nice and have so much knowledge. Your future self almost cut this video short and I was thinking - please let it run! Anyway - it's possible to watch this at higher speeds to "save time" but I like your content so much I watch it like a series episode 😅. Keep on what you are doing! 🙏

@vantikistudio Жыл бұрын

Thank you! I was SO torn on splitting this into two episodes - I even filmed an alternate take where future me says we need to cut it here 😁

@JasonThrifts Жыл бұрын

I will never make a mold or a mug or use slip. HOWEVER, i am fascinated and love all your Technical Tuesday videos. Such great and fun info and great editing. I know a lot of time and work goes into these and I appreciate them and you.

@vantikistudio Жыл бұрын

Thank you so much!

@PaperVineNZ Жыл бұрын

This is me too! I try and make videos for my craft - and I learn so much about the video making process from this series. I also just love watching a master of craft at work! I also recently found your reels on Instagram - enjoying watching those too!

@Fiakajsa Жыл бұрын

We dont need quick and snappy, we stay put any way ❤

@vantikistudio Жыл бұрын

Thank you! 😅

@milliehutchings Жыл бұрын

This video is perfectly timed! I had plans to start making moulds, starting with something small. Now I just need to find a plastic McD's toy (...they were banned in our country about 8 years ago...). 🤔🤔🤔 Also, you can make this 3hrs long, I'd still watch all of it (maybe in a couple of sittings...).

@vantikistudio Жыл бұрын

Thank you! Any simple small toy will do - simple objects (like a ball or an apple) can be great as well, but it is nice to learn from where the seam lines travel on the toys. Glad the episode wasn’t too long - I always worry!

@AnastasiaML4 12 күн бұрын

Thank you so much for this excellent and so detailed tutorial!!! I am working on casting parts of vintage dolls, I just create my first plaster mold, and this tutorial has been a treasure!!! ❤😊

@vantikistudio 9 күн бұрын

Best of luck with the doll casting!

@AnastasiaML4 9 күн бұрын

@@vantikistudio thank you!🙏💗

@idkflycasualtoo Жыл бұрын

This is awesome! I didn't know any Tiki guys were posting on KZfaq!

@voidborn-one Жыл бұрын

I'm also excited that 9999 more people find your content absolutely worth their time :D

@vantikistudio Жыл бұрын

Me too! Thank you for watching!

@TheKoyotetracker Жыл бұрын

I get so excited when there's a new TTT!

@vantikistudio Жыл бұрын

Thank you so much for watching!

@retailsucks84 Жыл бұрын

So excited to see a new video.!!!!! I find little gems of information in each one. Thanks!!!!

@vantikistudio Жыл бұрын

Thank you so much! I packed a lot into this one 😅

@RichardKuivila1947 2 ай бұрын

Never mind next comment. I reloaded you video and the "SAVE" button was THERE ! Tanks for great information.

@ChefBill Жыл бұрын

I've watched all your videos. What is cool is that this one fills in some details that I didn't pick up from the other mold making videos. And, as always, great production values! 👍

@vantikistudio Жыл бұрын

Thanks for watching! I tried to sprinkle some new stuff in there - small molds are less stressful, so I had time to think :)

@SusanHall Жыл бұрын

The info is great, the videos are great, but honestly- I would probably enjoy a video of you just sitting and reading the Manhattan directory. You have so much fun with whatever you do. Thanks for bringing us along; it's a fantastic ride!

@vantikistudio Жыл бұрын

Thank you!

@tomgimon5267 Жыл бұрын

Thanks for 49 amazing minutes! I hope you enjoy making these videos as much as we like watching them.

@vantikistudio Жыл бұрын

They are fun to do - but I worried that this one ran too long! Thank you for watching!

@littlepockets4959 Жыл бұрын

This is a great channel, you deserve more subscribers. I learnt a lot, thankyou

@vantikistudio Жыл бұрын

Thank you!

@Heartwing37 22 сағат бұрын

“Opeing” ? 😂 Great video!

@vantikistudio 11 сағат бұрын

Uh oh - did I miss a typo? Happens more often than I’d like to admit 😄

@shelliescroggins8188 Жыл бұрын

Your channel is one of my absolute favorites! I get so much useful information from your videos, and I find myself watching them over and over for inspiration and to work through problems with my own projects. As a secondary visual arts teacher, your channel has become one of my most valuable resources for technical information. I love your funny t-shirts, too! 👏👋👋

@vantikistudio Жыл бұрын

Thank you so much! As a former teacher, it makes me so happy to be a reference for educators!

@vaguelyelena 7 ай бұрын

You ubder estimate how interesting the video is. I was already planning to go and fibd the silicone mold video after this one

@oitisme 10 ай бұрын

This is an amazing wealth of knowledge and not many people do small molds, so i really appreciate it.

@vantikistudio 10 ай бұрын

Thank you so much, and thank you for watching!

@tealkerberus748 Ай бұрын

Subscribed. I am so many years away from needing to know how to make my own moulds it's kind of funny, but I'm not going to start resisting my inner need to know everything *now* at my age.

@vantikistudio Ай бұрын

Happy to help you prepare for a moldmaking adventure!

@eliaswatts556 3 ай бұрын

Great job on the end card :)

@vantikistudio 3 ай бұрын

Thanks! 😂

@keithlightminder3005 Жыл бұрын

These are great! So thorough! I have a dentist friend who I told about these and he is likely watching every one of your videos now he phoned and it felt like a phone call from heaven, he was so happy. Planning space in the next kiln load for his stuff.

@alinha861 3 ай бұрын

Você é simpático. E me senti animada com sua energia.

@TheMarkEH Жыл бұрын

A fabulous , informative and entertaining video. Thank you.

@vantikistudio Жыл бұрын

Thank YOU for watching!

@canorth Жыл бұрын

I was thinking,”I don’t remember having issues with my small molds” when I used your tutorials to start off. But now I’m realizing the benefit of 3D printing. I just printed a mold of a mold of a mold and made a silicone master mold straight from the 3D print.

@vantikistudio Жыл бұрын

Nice!! I hope to be at that point someday soon - I just need to get competent at Z Brush 🤞

@canorth Жыл бұрын

@@vantikistudio i’m going to have to look into that when I don’t have a solidworks license on my personal computer anymore. Definitely more skilled at CAD software than clay so far but I did drop off my first stuff at a studio for firing today so, fingers crossed I didn’t mess up.

@narwhool Жыл бұрын

Thank you for sharing your knowledge with us. This is exactly what I needed!

@vantikistudio Жыл бұрын

Sure thing!! Thank you for watching!

@wesleydelvalle6197 Жыл бұрын

Another beautiful master class! Thanks for sharing your knowledge :)

@vantikistudio Жыл бұрын

Thank YOU for watching!

@MargauxMuriel 11 ай бұрын

Exactly the video I’ve been looking for! Thank you! I subscribed for more content, I love your energy!

@vantikistudio 11 ай бұрын

Thank you for subscribing!

@shellypeaker672 Жыл бұрын

I look forward to all of the videos on your channel and can’t believe you don’t have more followers. Your videos are entertaining and informative. While I am not likely to ever use this, I enjoy going on the journey with you and had zero issues with the length of this one. Looking forward to the video with the testing of coloured ceramics.

@Ayala252 9 ай бұрын

That was so very helpful and so very fun to watch. Thanks!

@vantikistudio 9 ай бұрын

Thank you!

@TonyLockhart 11 ай бұрын

Fantastic video!

@vantikistudio 11 ай бұрын

Thank you!

@martinamnickel Жыл бұрын

Really nice video! Thanks for sharing your knowledge :D

@vantikistudio Жыл бұрын

My pleasure!

@acardenas3923 5 ай бұрын

Thank you for the class

@vantikistudio 5 ай бұрын

Thank you for watching 🤙

@MrAlliecaulfield Жыл бұрын

Thinking of starting a production ceramic business. Your vids have been invaluable. Can't thank you enough

@vantikistudio Жыл бұрын

thanks for watching - glad I could help!

@kemeryzetzman6271 5 ай бұрын

Great video!!

@vantikistudio 5 ай бұрын

Thank you!

@razorSH 3 ай бұрын

Your videos are awesome! You are a natural and also the production quality is very good. I watched several of your videos in a day and I don't even have any interest in pottery and yet I found your clips very interesting and entertaining.

@vantikistudio 3 ай бұрын

Thank you so much!!

@leam1978 8 ай бұрын

Great explanation. I’m a sculptor looking to get into slipcasting, and this was exactly as technical as i needed.

@vantikistudio 8 ай бұрын

Awesome!

@JohnJones-oy3md Жыл бұрын

37:55 - Thank you present-Henrik for persuading future-Henrik on our behalf. Much obliged!

@vantikistudio Жыл бұрын

😂

@auditra 11 ай бұрын

You gained yourself a subscriber! I just found this one video from you and i thoroughly enjoyed sitting through the whole video like its an educational tv series on the afternoon!! Youre a great teacher and please keep doing amazing :)

@vantikistudio 11 ай бұрын

Thank you so much for subscribing!

@doltonade Жыл бұрын

Another fantastic tiki technical Tuesday. Finished it over 3 sittings!! And I’ve also subscribed and I see the 10k has been unlocked!!

@vantikistudio Жыл бұрын

Thank you! I’m so happy about hitting 10k - I appreciate your support!

@Engwadur Жыл бұрын

great video!

@vantikistudio Жыл бұрын

Thank you so much!

@jasonvigdor1257 Жыл бұрын

Love the Gunshow T!

@vantikistudio Жыл бұрын

One of the best dinners I’ve had in my life!!

@kyrieeleison2793 10 ай бұрын

Thank you kindly for the video and the joy of your teaching and editing style! This will help me immensely as I start up my slip-casting production work. Greetings from Salem! I love Georgies. :)

@vantikistudio 10 ай бұрын

Thank you for watching! Georgies is the best!

@johnathannyc Жыл бұрын

beautiful graphics in your undercut animation! I can appreciate the time that went into making it :D

@vantikistudio Жыл бұрын

Thank you! It’s a difficult concept to explain.

@mattiasfagerlund Жыл бұрын

Regarding vibrations - I've found that a super cheap cordless massager works wonders for vibrating bubbles out of plaster. Way better than banging on the form - though a vibration table would be sweet! Regarding the plaster trap - are there issues pouring cured plaster down the sink? Uncured plaster would of course be a problem, because if it cures in your pipes, you're in a world of hurt. But what are your thoughts on slices/sludge of cured plaster?

@vantikistudio Жыл бұрын

You are right, technically cured plaster bits should be ok down the drain, but I don’t like to risk it. They can still build up on the low spots of your pipes as they are heavier than water. I’d put a mesh screen over your drain if you’re cleaning molds/buckets in your sink to keep the plaster chips out of the drain.

@samlongbotham1840 Жыл бұрын

So cool to see you make this great educational video. A few years ago I got back into ceramics and started using sprig molds and I cast my originals in silicone so I could make multiple molds. The skills one picks up in film are quite transferable to a studio practice. Your instagram is great too!

@vantikistudio Жыл бұрын

So glad you found my channel! Those film techniques have lots of real world uses 😄 Thanks for watching!

@samlongbotham1840 Жыл бұрын

@@vantikistudio the quality of the content you are making is amazing and you are so open and honest about your process. Thank you VanTiki!

@mandark10110 Жыл бұрын

These videos are great and again thank you!! One thing ive been wondering, as i cant seem to find any of your mugs for sale on your site, is how you go about pricing your Tiki mugs, what factors do you take into account etc. would be amazing to have a video on how you structure your time vs. payouts etc If not your actual numbers just an indication on what a ceramists starting out should consider when setting up to sell, operational equipment , the market etc

@vantikistudio Жыл бұрын

Whoo! That would be a tough episode to do, as studio setups and material costs can vary so widely depending on where you are.

@mandark10110 Жыл бұрын

@@vantikistudio it is a difficult thing to navigate tho, as an artist attempting to break into the slipcast "scene" I have no idea how to price my product. Obviously quality, your artistry and your years of experience all factor into what people are willing to pay, you also create many many versions of the same mug. From comments you've made I believe you do a pre-sale before slipcasting begins? I guess it all boils down to what you have learnt along the way and what you are prepared to share regarding your business setup. TO BE CLEAR too what you have already shared is truly the most amazing resource for this process and I "we" are very grateful...looking forward to the next one..best

@alinha861 3 ай бұрын

Melhor vídeo explicativo. Com detalhes relevantes. Parabéns.

@susan3156 Жыл бұрын

You’re crazy and likeable all in one 😂 hello from Tasmania Australia 🇦🇺 👋

@vantikistudio Жыл бұрын

Thank you so much!

@maxkielbasa6079 9 ай бұрын

great video

@vantikistudio 9 ай бұрын

Thank you!

@novanightgale8084 5 ай бұрын

I was thinking 'this is a lengthy video' not that I expected it short but you are very thorough adding little tips, you're not boring to watch so it being longer isn't a hassel.... but I did lose any composure at your excitement at getting to use your vibrating table. I do alot of various diy stuff and have been learning about casting with different molds and materials and even making molds but I like your thoroughness and pace, even if I weren't planning to make my own molds I would have watched this after coming across the video.

@vantikistudio 5 ай бұрын

So glad you found the video! I often worry that they are too long - but I like to put as much info into them as I can

@duarteper27 7 ай бұрын

Cool

@Xenofauna 10 ай бұрын

I was researching moldmaking in general but I clicked on THIS video for Booska. HELL YEAH, BOOSKA.

@vantikistudio 10 ай бұрын

Booska 4 life!

@thetravelinghappyhour182 Жыл бұрын

Another great video and explanation. Thank you for all your hard work. I did find the Easter egg typo.

@vantikistudio Жыл бұрын

Oh no! I haven’t found the typo! 🥺

@thetravelinghappyhour182 Жыл бұрын

@@vantikistudio opening. 😄

@thetravelinghappyhour182 Жыл бұрын

Congratulations on 10k.

@animalcraker Жыл бұрын

I just found your channel a few days ago and have been binging through all your wonderful videos. Even my 3yr old and 5 yr old enjoy watching them with me. Keep up the good work! How long do the silicone master molds last?

@vantikistudio Жыл бұрын

I’m so glad you found my channel! I have only been using this silicone for 5 years, and the 5 year old molds I have are in great shape. Back in my FX days the silicones we’d use would begin to tear as they aged and broke down - you’ve inspired me to reach out to the manufacturer and find out how long they think their product will last!

@julietasozzani9269 11 ай бұрын

Hi! Love the video! Super useful, quick question! How would you suggest finding the centerline when the prototype does not have this obvious seamline?

@vantikistudio 11 ай бұрын

Good question! One way is to hold the shape out, and close one eye. Move a pencil tip slowly around the edge - if the pencil tip disappears behind the model, that is an undercut. Mark a line with the pencil at the exact point before the tip moves behind the model - I hope this makes sense! 😅

@Arhmt9Playlist Ай бұрын

I was looking at your shop and saw a picture of the jack-o-lantern mug you did a while ago. Very neat. Do you think you will ever do anything like that again?

@vantikistudio Ай бұрын

That mug edition is closed - but I may revisit the concept one day!

@mikegiron3071 Жыл бұрын

Excellent as always! Hopefully a helpful hint, if you tip the level on its face, you can level in the X, Y, and diagonal all at once! Hope that wasn't already obvious😊

@vantikistudio Жыл бұрын

Good tip!! Thanks!

@rjsmith9635 Жыл бұрын

Thanks so much for your videos. How do you prevent the 2nd half of the plaster mold from sticking to the 1st half ?

@vantikistudio Жыл бұрын

Mold soap! At least 3 coats, wiping away and buffing after each coat with a clean soft rag

@rjsmith9635 Жыл бұрын

@@vantikistudio thanks

@SteveFerrera 11 ай бұрын

Great vid ! Can you use a universal mold release spray on the piece instead of mold release ?

@vantikistudio 11 ай бұрын

Thank you! I haven’t tried universal mold release, so I’d say to do tests first before committing an important piece to a mold.

@megankenway8757 10 ай бұрын

I love these instructional videos, but I have a question. Why do you drill the keys after the first half is done? Couldn’t you just put a depression/mound in the clay for the first piece?

@vantikistudio 10 ай бұрын

you definitely can! Sometimes I make clay keys (you can see me do it in my other mold making videos), and sometimes I like the clean keys a drill can make. As long as the shape you make registers the two mold halves together, it's a good key!

@user-qe3tf8bm9p 3 ай бұрын

Great video...love your style But need some help. Can i use plaster of parish instead of potter plaster for mold making and how to make casting slip using wet clay.😊

@vantikistudio 3 ай бұрын

I'm not a fan of plaster of paris - it isn't good for making molds. As for making slip from wet clay I've never tried it. I only use pre-made clay bodies designed for slip casting in the studio.

@reality9270 4 ай бұрын

I love the bill nye esque filming style, face 6 inches from the camera

@oitisme 10 ай бұрын

Do you have any advice for molding coin sized objects?

@vantikistudio 10 ай бұрын

For very small objects like coins you may not need to make a mold box/jacket - the silicone block won’t need the support as the piece you’re casting is so small it isn’t likely to distort the mold.

@micheledickey4066 Жыл бұрын

I can NOT tell you how very very much I appreciate your videos!! This was so informative and I realllly appreciate it. I’ve never seen anyone cover the holes in the mold. Looks like slices of cheese! Lol. What does this do? Obviously it will help it to not dry out. But why? Also… I wanted to ask you how you only fill the molds once without topping off every few minutes?

@vantikistudio Жыл бұрын

Thank you!

@micheledickey4066 Жыл бұрын

@@vantikistudio Would you mind answering my other questions please?

@dylanm3519 Жыл бұрын

How thick do you make your silicone for the master mold? How much extra beyond the flat plaster edge?

@vantikistudio Жыл бұрын

Usually between a half inch to an inch. I go deeper into it here: kzfaq.info/get/bejne/qcWjp5akmq2vqo0.html

@asa_2361 8 ай бұрын

Hi, wondering about your choice of Rebound 40. I'm trying to save some money with the master mold making process. Have you tried Urethane rubber for making your molds? Econ 60 Urethane runs about half the cost of Rebound 40 and on paper looks like it would work. I looked at the tin cures that smooth on makes but the combination of long set time and need for a vacuum degasser make the cost savings seem moot.

@vantikistudio 8 ай бұрын

You can definitely save $$ using urethane, and many artists I know go that route. I’ve used it in the past with good results, but it has some issues that can lead to disaster. It is VERY stiff (which can be a good thing - you don’t need wood boxes for your molds), but it is also VERY sticky. It’s essentially a glue, and if you don’t release your model well it will bond permanently. Another factor is it’s moisture sensitivity (moisture will cause it to foam and it will inhibit the cure) and I’ve had the water in plaster molds inhibit the urethane which left me with a sticky mess all over my model. Lastly, (and this is the same for silicone) you need to mix it very well or it won’t set. Unlike silicone, the two parts are not different colors giving g you a good visual of the quality of your mixing. That being said, it is MUCH cheaper!

@C-M-E Жыл бұрын

When tupperware/rubbermaid containers *used to be more affordable, that was my go-to enclosure for anything that might have fit for my reusable mold box. I was a prolific foam core user for a long time, but if/when you find yourself duping the same size shapes and just need a quick off-the-shelf solution, I'd reach for those old containers before the glue gun. Now it's about even anymore as the containers are so thin, you might get two uses out of one, but you get the added benefit that they have draft angles built in for easier removal. In a true tit-for-tat, I've tried a lot of release agents from home brew to commercial options, though depending on what mold material you're using, the 'ceramic' car wax works great for just about everything except silicone (as I later found out, that 'ceramic' component is just watered down silicone, literally, which in my book barely qualifies as ceramic). The stuff in the 16-32oz spray bottles last A LONG time. I used to go for carnauba wax layers, but things with exothermic reactions will definitely melt through wax, including things that use epoxy. Vaseline is good for those things but it's messy and time consuming during removal. I'll definitely have to try out the murphy soap as an alternative!

@vantikistudio Жыл бұрын

Another wall material I’ve seen folks use are LEGO bricks - they seem to work great and can be set up in multiple sizes. I just don’t have any in the studio, and while I could probably search for a bunch of used bricks foamcore suits my needs, and it’s super fast (time is always the key in production)

@C-M-E Жыл бұрын

@@vantikistudio Interesting! I've never even thought of legos. My kids have piles of them; heck, free labor, and surely they can be coerced to make a box. 😁

@WadeMcLure 7 ай бұрын

13:00 Have you thought about just using bar clamps instead of your flying buttress idea?

@vantikistudio 7 ай бұрын

When I do large molds I make the cottle box out of wood and use clamps to hold everything together. For small molds like this I find the foam core buttresses to be the fastest for my process.

@TheJohndeere466 Ай бұрын

What kind of slip clay would you use to make a ceramic planter for planting flowers outside?

@vantikistudio Ай бұрын

hmm- will it freeze outside where you will put the pots? If so, I'd use a stoneware slip like the one I use in the studio - low fire slips don't completely vitrify and can get moisture seeping into them that can freeze and crack the clay.

@TheJohndeere466 Ай бұрын

@@vantikistudio Where would I buy that? sorry If you have already said that somewhere. I havnt watched all your videos yet.

@RichardKuivila1947 2 ай бұрын

Does adding some alcohol (as a wetting agent) in to the plaster mix make it cast smoother and release trapped bubbles better ? Would evaporate before mix cures ....

@vantikistudio 2 ай бұрын

I wouldn’t want to take away from the water or dilute the water in the mix - it’s necessary for the plaster to properly set (the rehydration of the gypsum is part of the chemical reaction that makes the liquid plaster turn to stone). I do find a spritz of alcohol after pouring helps to break any surface bubbles

@alliesmith7206 2 ай бұрын

We had a mold make of my late daughter's hand. It was made with plaster of paris, I believe. I would like to make additional molds. How would I make a copy? I have heard that you can coat it with several layers of latex to make a negative to make more molds.

@vantikistudio 2 ай бұрын

Great question! I’d recommend using silicone to make a flexible mold of the plaster hand - mainly because it has a low shrink rate and the castings would be the same size as the original hand. Smooth on makes a two part silicone putty that is like silky putty. It sets quickly and you could mold your hand with that.

@101egals 3 ай бұрын

Question? Can you use a silicone mold to be used to make porcelain cast figures?

@vantikistudio 3 ай бұрын

I wish! Sadly the mold needs to be porous plaster for the slipcasting process to work.

@HealthyDiet-pk4kx 25 күн бұрын

Can we add some glue with plaster to make mold stronger and prevent cracking?

@vantikistudio 24 күн бұрын

I know of several folks who make additives for gypsum that make it stronger for architectural use - but I would worry that it would affect the absorption qualities of the plaster and make slipcasting difficult

@stevenk0630 3 ай бұрын

Hi, I'm trying to make a plaster mold for my ceramic project. It's a wax candle (figure) and it is kind of complicated form to start with. I don't know where to find a center line. Do you mind if you can check to see if it's even possible to make one? I could send pics or vidoe for you to see.

@vantikistudio 3 ай бұрын

It’s very hard to give moldmaking advice without being able to hold the model - My advice is to hold the model away at arms length, and mark the edge of what you can see to find a rough parting line.

@jacquelineshawdeyoung6918 8 ай бұрын

One question I would like to make a 3D mold of a craft skate I have the skate however what should I put in between the blade and boot part? Thanks

@vantikistudio 8 ай бұрын

I really couldn't say without seeing the piece. Is there a ceramics supply store near you that you could contact? They may know of a local mold maker who could give you advice.

@jacquelineshawdeyoung6918 8 ай бұрын

Thank you for the reply No I don't have anyone around to ask

@najwaaziz7876 6 ай бұрын

👍🏼

@valerivera2133 9 ай бұрын

You could upload an hour and a half video and I'm going to watch the whole thing without fail

@vantikistudio 9 ай бұрын

don't tempt me! :D

@demokratmuhalif1869 Жыл бұрын

Could you please link the silicone which you use for molding 😇

@vantikistudio Жыл бұрын

I use Rebound 40, and go into the reasons it works for me here: Making a Slipcast Mug pt3: Silicone Mold Making! - Tiki Technical Tuesday kzfaq.info/get/bejne/Z5iFlMt92pOyias.html

@demokratmuhalif1869 Жыл бұрын

@@vantikistudio thank you so much👍

@mateuszk8616 Жыл бұрын

Hej :), goooooood episode!!! ps. what software You use for animations in video? Best regards

@vantikistudio Жыл бұрын

Thanks for watching! I do the animations with Adobe After Effects

@mateuszk8616 Жыл бұрын

@@vantikistudio Thank You :)

@lisasternenkind6467 2 ай бұрын

Why didn't you insert marks on the first half of the mold while wet by pressing in a rounded piece of wood or whatever? Drilling it when it's still curing puts a lot of tension on the plaster and might crack it. Is there a certain reason for doing it this way? Or did you just forget to make them?

@vantikistudio 2 ай бұрын

You can totally press a round sale into the clay - I often build keys into my clay walls that way. I find I get cleaner keys when doing round keys by drilling them into the plaster. I’ve never had any issues with the plaster cracking.

@bilalabudaud 11 ай бұрын

41:34 What kind of plastic backing do you use, sir?

@vantikistudio 11 ай бұрын

Those are sheets of foam core - it’s a foam/paper sandwich used for posters/models/etc

@elainedesantana1993 Ай бұрын

can i make a mold for a clay object or they would stick together ??

@vantikistudio Ай бұрын

It depends on what you are molding and what material you make your mold out of. What kind of clay is the object?

@TheJohnnyg111 9 ай бұрын

i have several hundred plaster ceramic molds i want to use plaster instead of slip to pour the whats the best thing to use for a mold realease for plaster to plaster pouring ? thanks

@vantikistudio 9 ай бұрын

I know folks use mold soap for that - but I don’t ever do it, so I’d check with someone who has - I don’t want to give you bad advice and have your molds lock up 😄

@TheJohnnyg111 9 ай бұрын

ok thank you very much @@vantikistudio

@garysimon8359 9 ай бұрын

Plaster expands and will not release from the inside of a plaster mold unless there is a lot of draft (Angle) on the item the mold produces.

@deseanmac9871 6 ай бұрын

I am new to mold making and im going to attempt one this week and need your advice. What’s the best way to contact you?

@vantikistudio 6 ай бұрын

You can DM me on instagram, but I’ve pretty much put everything I know into this video (and my other moldmaking episodes)

@kevinleong4467 9 ай бұрын

I always let it dry/soak into the form… why do you wipe/buff right away?

@vantikistudio 9 ай бұрын

You are doing it right - I’m rushing due to camera nerves 😅

@kevinleong4467 9 ай бұрын

@@vantikistudio ok thank you because no the video you say you brush it on and wipe it back to buff it and leave some soap but I was always taught to let it soak. THANK YOU.

@vantikistudio 9 ай бұрын

@@kevinleong4467 yeah - i do like to buff away as much as possible to keep the surface Fran having built up layers of mold soap - it can affect the fit of the castings. I recently switched to Laguna Pure Lube as a release for plaster and it is AMAZING

@RichardKuivila1947 2 ай бұрын

Can't save in my KZfaq library, so it's Bye Bye forever !

@AtypicalPaul 8 күн бұрын

Do you used 70% rubbing alcohol?

@vantikistudio 7 күн бұрын

I think I’m using isopropyl alcohol.. I don’t have the original container since I transferred it to the squirt bottle.

@geneard639 Жыл бұрын

vibrating table? um..... yeahhh.... palm sander with the trigger zip tied used with no sandpaper, set down on a sheet of plywood and... affixed to the plywood, suspend the plywood on some ballbearings? um... I would have to have a 'track' where the ballbearings can move around but also hold the plywood to the area of the tabletop. Yeah, doable. actually too much work, palm sander to the box for a bit should do it.

@vantikistudio Жыл бұрын

Ha - yes, as I mentioned, the vibrating table isn’t required, but if you do this for a living (as I do) the table is fantastic to have.

@geneard639 Жыл бұрын

@@vantikistudio Thank you for the reply. I'm eager to see your upcoming experiments.

@lisasternenkind6467 2 ай бұрын

What do you make 70 copies from each of your molds of somebody else's design for? As you stated in the video, you shouldn't sell any of these copies. So what are they for?

@vantikistudio 2 ай бұрын

I’m making multiple copies of this for testing glazes - like I said the the video, it’s a great shape for a glaze tester, but as I do t own copyright I’ll never sell it.

@cecilomar 8 ай бұрын

You sound like Mr O'Neil from Daria.

@vantikistudio 8 ай бұрын

Uh oh - I hope that’s a good thing! I’ve never seen Daria 😄

@cecilomar 8 ай бұрын

@@vantikistudio One of my favorite characters. A nice teacher/counselor that did his best to make sure his students were taken care of. It wouldn't be comedic if he wasn't also naïve and a little bit too sensitive.

@R3troZone Жыл бұрын

So when are you going to show us how you put the footer on your mugs? In every one of your series', you show the sculpting, the plaster, molding, the production molding, the silicone, the slip casting, and the glazing. But in every single series, the clay sculpture still has the wooden base on it when you mold it and then next thing we see is the bisque fired version with a footer that has the mugs name and series number on it. We never see you add that to the mold and I'm kinda curious how you do it.

@vantikistudio Жыл бұрын

That is a bit of my process I like to keep a mystery. There’s lots of ways to do it, and I’ve used many methods through the years.

@R3troZone Жыл бұрын

@@vantikistudio Ah. Well that sucks. I have been searching and searching and can't find anything on it. Driving me nuts.

@hillbillywisdom777 Жыл бұрын

I wonder what would happen if you put that mold on your vibration table for about 20 minutes before you try to open it. Wonder if maybe it would open itself.

@vantikistudio Жыл бұрын

Hmmm - I don’t think it would. They are usually really well stuck together and need a bit of help from a shim/scraper

@R3troZone Жыл бұрын

Most important rule of all. Always wear black when working with plaster. 😜

@vantikistudio Жыл бұрын

Truth! 😂

@MrAlliecaulfield Жыл бұрын

Sorry but you don't show how you "seat " the original piece

@vantikistudio Жыл бұрын

not sure what you mean?

@hillbillywisdom777 Жыл бұрын

You must have been really tired, you forgot a letter in the opening and cleaning graphic.

@vantikistudio Жыл бұрын

Oh no! This is a great example of how you can be blind to mistakes when editing for hours 😆

@hillbillywisdom777 Жыл бұрын

@@vantikistudio I don't understand how you accomplish it all. I guess the editing is also artistic. You have much more patience than I do. I enjoy your videos very much.