Smart Home Protocols Explained

  Рет қаралды 134,651

Home Automation Guy

Home Automation Guy

Жыл бұрын

A whirlwind look at the main smart home protocols that are out there today including Bluetooth, Wifi, Z-Wave, Zigbee, and Thread. I also explain why I'm sticking with Zigbee as the main smart home protocol in my brand new smart home.
❤️ Found this video useful and want to support the channel? I'd love a donation at paypal.me/homeautomationguy
Links:
Building a rock solid Zigbee network: • Improve Zigbee network...

Пікірлер: 174
@FurtzBR
@FurtzBR Жыл бұрын
two days since i discovered your channel and i've learned so much!!! Keep-up, awesome work and dedication!!!! cheers from Brazil
@avtarchana609
@avtarchana609 Жыл бұрын
Thank you for a short, sweet and useful rundown on the Smarthome wireless systems. 🙏
@Woodgal91
@Woodgal91 Жыл бұрын
I’m just getting started and to say I feel overwhelmed is an understatement. That is until I watched your video….thank you so much for explaining this all. I now have a better understanding of the basics at least!
@madisonm2878
@madisonm2878 Жыл бұрын
What an amazing video to explain the different technologies, I don't share KZfaq videos very often but will be with this one! Thanks for the great video
@gabrielzalisz
@gabrielzalisz Ай бұрын
Best video on IoT protocols I've ever seen. Thanks and greetings from Czechia.
@patrickpaganini
@patrickpaganini Жыл бұрын
I was about to buy four Tapo P110 plugs today (since I couldn't find the old ones on line). Thanks for saving me! I didn't realise they needed internet to work.
@Joseph-ko2kl
@Joseph-ko2kl Жыл бұрын
Great info. Totally agree with your take on Thread/Matter.
@lawrencemanning
@lawrencemanning Жыл бұрын
Very interesting vid. Looking forward to hearing your take on light switches. One thing that personally bothers me a great deal is consistency. The nice thing about dumb ugly plastic switches in a typical house is they at least all look the same, ignoring dimmer knobs. Another problem is choosing your perfect switch today and then not being able to find the same ones in a few years when you build that extension. So definitely make sure you buy a load of spares!
@stevewegenast4403
@stevewegenast4403 Жыл бұрын
Nice clear, concise explanation of the home automation protocols. Well done.
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Thank you! Glad it was useful!
@omadden234
@omadden234 10 ай бұрын
Great overview and explanation. Thank you!
@Larry67902
@Larry67902 Жыл бұрын
Great video, most of my devices are zigbee as well. Might be worth pointing out to people that zigbee battery operated devices don't act as zigbee repeaters as this would seriously degrade their batteries. I do also use z-wave devices for my wall switches, mainly as most wifi based ones require you to sign up for the manufacture's app and a lot of them then use the internet to turn them on and off as you described in your video. I really like the zooz zen32 z-wave scene controller, but 2 blueprints have made it very nice indeed now. The lights sync as they should now no matter how something is turned on. I have it installed at my front door showing status of alarm system and my smart locks.
@shiPham0705
@shiPham0705 Жыл бұрын
great video as always! can't wait to watch more then
@basmedia5885
@basmedia5885 9 ай бұрын
Awesome video - so much explained to clearly! I'm just learning to crawl and this really helped!
@HomeAutomationGuy
@HomeAutomationGuy 9 ай бұрын
Glad it's helpful! We're all learning, all the time - enjoy the journey
@DanielGAndrew
@DanielGAndrew 9 ай бұрын
Great video. Thanks!
@MrHollow
@MrHollow Жыл бұрын
Good job on explaining the standards, especially zigbee and thread in relation to matter.
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Thank you!
@josephiyere4491
@josephiyere4491 Жыл бұрын
Wow thanks for the explanation… you sure is a champ
@billhaigh2097
@billhaigh2097 Ай бұрын
Brilliant video, clear, well delivered has helped me understand what is a bit of a minefield to the novice, thanks
@HomeAutomationGuy
@HomeAutomationGuy Ай бұрын
Glad it was useful! 🙏
@Middollo
@Middollo Ай бұрын
Once again, very clear explanations. Thansss.
@alexandro8530
@alexandro8530 8 ай бұрын
Great videos, very clear! Any advice for a good zigbee hub, considering hubitat is useless for power strips?
@pratahsinnetamby
@pratahsinnetamby Жыл бұрын
Great summary video on the network options. I was not aware that thread allowed you to have a "back-up" controller. I've recently purchased the HA skyconnect as well for my zigbee network. However, this "hub" is tightly coupled with the HA server itself so I'm wondering if it is possible to have a back-up (i.e. two of them running together with one as master)?
@david85o
@david85o Жыл бұрын
Great video! Wondering if you could make a video explaining your wifi APs ubications and how did you handle blind or dead spots when switching between APs. Thanks! Pd: when I started with HA, I struggle with the type of installation. I choose to follow your aproach with docker, but then you did proxmox hahah.. So I just go with it (ha os in proxmox). Hope you could migrate succesfully all your devices to this new infra. Glad if you could do a video with a follow up on it! Greetings from Chile
@edr2653
@edr2653 8 ай бұрын
Excellent over view of all the different systems. I got the impression that assuming you have a robust internet, wifi, zigbee mesh and control system you can mix and match home automated products. My inherited system is Control4 which is great for my video and audio distribution, + Zigbee light switches but mods to the system can be expensive (£375/day for a programmer). My Zigbee mesh is via light switches which are £175 per switch, which is extortionate. My question can I piggy back on my control4 Zigbee mesh using cheaper zigbee light switches? My zigbee lights are rock solid and I can self programme using the customer/control4 for simple controls. But do the zigbee components have to be compatible with control4? I have experimented with Shelly products for garden lighting which is outside of my zigbee mesh range but I have an AP point in the garden and Shelly light switches can be added to my Lan. This helps putting on the lights at the bottom of the garden via the Shelly app on the iPad and reduces the component cost vs control4 , Control Integration within Control4 is possible providing in add a Shelly driver into my control4 project via the control4 professional. But again it’s expensive.(driver £70+370 for programmer) Is it possible to run two home automation and control4 system simultaneously without conflict . Control4 using fixed ip addresses, and zigbee for lighting and home automation using its own protocol and the cost benefit of cheaper zigbee components. Thanks in advance. Ed R
@PetervanHofwegen
@PetervanHofwegen Жыл бұрын
Every time these comparison video's pop up I always wonder why the (granted niche) protocol of 433mhz is missing. Very nice and clear video overall though.
@Maaniic
@Maaniic Жыл бұрын
It might be worth noting that Zigbee is a radio mesh protocol that has nothing to do specifically with smart home or lights (even if it is synonymous with it today) just like thread thread uses ipv6 as its transport and zigbee has its own node and cluster design baked in. The standards that lights commonly use over Zigbee for control are called ZLL (Zigbee Light Link) and for sensors and other devices for home automation it uses ZHA (Zigbee Home Automation) it is in these standards that different manufacturers don't always implement it the same way. Most devices today will adhere to the Zigbee 3.0 spec but all that means is that they can join the radio mesh. It would be cool if Unifi APs could have a Thread radio and act as a border router and be manages like any other network in their system.
@milicsantiago
@milicsantiago Жыл бұрын
Great video!
@craigsamuels7895
@craigsamuels7895 Жыл бұрын
What zigbee light switch are you using ? And also, where do you tend to get them from ? I see some on Amazon, but the prices are quite expensive. Keep up the great work alway happy when you upload new videos
@Upperton
@Upperton Жыл бұрын
Really looking forward to your Smart Switch video. I’m running HomeSeer as my controller as I prefer it over HA, but have the same dilemma as you over what smart switches to use. Currently have a mixture of Z-Wave, WiFi, ZigBee and RFXTRX devices, but I would like to reduce the complexity whilst improving the mesh. I’m currently testing out Moes and Aqara light switches. The Aqara stuff is top quality. Moes is a bit plasticky. Really interested to see what you make of them all!
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
I agree - I wanted to create a great Zigbee mesh, and resuse some of the battery powered devices and smart bulbs/LED strips that I brought over from the other house. I'd like to get rid of the battery devices eventually, as they're annoying when they lose power, but I may as well use them for now until I find a suitable replacement! I have very similar thoughts on the Moes and Aqara!
@ha-cn4wu
@ha-cn4wu Жыл бұрын
Great video as usual :) if i understand well philips hue bridge will be compatible Matter sooner or later therefore what would be the need to have a HA skyconnect dongle as anyway there is already an add-on in HA for philips..? thx for your answer :)
@circleofowls
@circleofowls Жыл бұрын
Fantastic overview. I've installed both Z-wave and Zigbee dongles on my HA device so that I can opt for the best product for my use case regardless of which protocol it supports. Keeping the same protocol would result in a stronger network with enough devices installed but I really don't expect to install enough devices to make a huge difference. It sounds like Zigbeen/Matter are the future though, I'll certainly be prioritizing them from now on, thanks.
@KameraShy
@KameraShy 10 ай бұрын
I am finding that as well. The device functionality I want only comes in just one of those protocols.
@gmasterdude
@gmasterdude Жыл бұрын
Very good. I have Wifi Tuya down lights they don't work well with Home Assistant themes so wish I bought Zigbee.
@mongini1
@mongini1 Жыл бұрын
im using mostly Zigbee and wont buy anything other if i dont have to... The only exception are D1 Minis which i use for WLED stuff. Got some Aqara motion and light sensors, which after 2 years are still on their first battery, which is crazy efficient. Anything connected to mains acts as a mesh repeater, and the signal just gets anywhere without even planning this out. The coordinator is just a USB Stick on the Pi which runs HomeAssistant. And with that, automations are only limited by your creativity ^^
@gillingja
@gillingja Ай бұрын
Great, concise explanation! Keen to adopt Thread, but one year on, the wall switch market is still sparse and expensive! Looking for multi-gang smart switches that offer dimming functionality and support Thread seems impossible.
@HomeAutomationGuy
@HomeAutomationGuy Ай бұрын
I'm sure they'll arrive on the market soon. But until then I'm sticking with my Zigbee switches
@JohannY2
@JohannY2 Жыл бұрын
Wow, this was interesting. I never knew about the Chinese sparrow.
@theattorney6072
@theattorney6072 8 ай бұрын
Hi, any info/video about multiple hue bridges with one amazon account ?
@DarrellaaS
@DarrellaaS Жыл бұрын
0:32 A light strip under the bed that turns in when your feet hit the floor? Awesome!
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
It's one of my favourite home automations!
@TelmoGuerreiro
@TelmoGuerreiro Жыл бұрын
Very, very nice job on this one. Exactly my thoughts on the “matter” 😂! If I may ask about your experience with the sky connect. I tried to replace my conbee2 with the sky connect. But there was one device: the Lutron aurora, that didn’t like the change. I could see the turn event but the press event didn’t work. I had to go back to the conbee. Any thoughts?
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
🤣 The "Matter" jokes keep coming! If a device relies on actions or events, I find that I need to press the buttons etc during the pairing process. I had the same problem with the Philips Hue dimmer switch on both my Sonoff USB Coordinator and the Sky Connect. Otherwise I've had absolutely no problems with it, it's been rock solid.
@r3v0lution
@r3v0lution 4 ай бұрын
@ 3:39 , voice drop caught me off guard! LOL
@g0ral
@g0ral Жыл бұрын
Could you please test IKEA Diregera gateway. Its MATER compatible and im wondering if i could connect my old zigbee devices to it and if they will be visible in homekit
@barygol
@barygol 2 ай бұрын
I'm going to do a total reno of the house, would you cable it to use KNX with HA for what I can use it ?
@VA7LFD
@VA7LFD Жыл бұрын
I am a totally newbie to HA. I just ordered my first SONOFF motion sensors and USB Zigbee 3.0 USB Dongle. Question I have which I am having problems understanding is can I install Home Assistant on an older laptop/desktop (i3 with 8g). Does HA come as an ISO I can then install on a dedicated computer for HA? Thats my biggest obstacle so far. Love this channel learning lots. ----Just had my question answered on your previous video. Love it thanks!
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Glad I could help 😏
@jaap7374
@jaap7374 Жыл бұрын
It might be good to note that bandwidth is not the limiting factor for wifi, but the number of devices your network can handle simultaneously. ISP wifi can die with as little as 30 devices.
@lawrencemanning
@lawrencemanning Жыл бұрын
I assume you are referring to the cheap and nasty router supplied with the DSL/whatever, and not any other limitation. First time I’ve come across the phrase “ISP wifi” and it sounds very confusing.
@jaap7374
@jaap7374 Жыл бұрын
@@lawrencemanning internet service provider's wifi
@BoraHorzaGobuchul
@BoraHorzaGobuchul Жыл бұрын
The solution would be to replace the router itself, if possible (friends on the provider), or put a real router+ap after the isp's while putting it in bridge mode, or turning off isp router's access point and connecting a decent access point(s) like ubiquity. Of course, care has to be exercised to avoid wifi (or any other) "smart" devices that "phone home" to their own manufacturer's server, for bandwidth, reliability, and security reasons
@SergioBlackDolphin
@SergioBlackDolphin Ай бұрын
I have a strange vertically built two stories home. At the moment I have a zigbee Philips hue hub. I plan to remove it once the ZHA dongle arrives. However I am concerned about reach? I wonder if I will have reach issues.
@waynenocton
@waynenocton Жыл бұрын
I’m at the point where I really need a reset, moving would be one way to make that happen lol. As I’ve learned from you and others my system has gotten more and more complicated, but I’m using Node-RED, as well as Home Assistant automations, but at this point I don’t see much of a reason to keep Node-RED, HA can pretty much do it all. If the raspberry pi’s weren’t so expensive, I’d build a parallel system then swap over.
@christiandavies7650
@christiandavies7650 Жыл бұрын
Agree. I was deep into Node Red when HA was all YAML based but the automations and GUI configuration are so good now I think HA is probably better than Node Red for most things.
Жыл бұрын
Any recommendations for Zigbee motor controller similar to Shelly 2.5?
@evancombs5159
@evancombs5159 Жыл бұрын
ZWave is my preference due to not using 2.4Ghz. 2.4 is just too congested there is a good chance of you have network issues it has nothing to do with your network, it could just be a leaky microwave. That is why in my new house I'll be using Lutron for switches and ZWave whenever possible. The only thing they have to compete with is baby monitors. The only downside of ZWave compared to ZigBee is the size of the network. ZWave only allows about 300 devices compared to ZigBee's thousands.
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Yeh, that's fair. Lutron just isn't that popular in Europe so I don't have a lot of experience with it. I think Z-Wave is a very good protocol and I would totally use it if I didn't already have so much experience and so many devices that use Zigbee. I don't think there's any right or wrong answer here. Both are solid mesh networks, low power, have great device compatibility and most importantly run fully locally!
@EmilePolka
@EmilePolka Жыл бұрын
It really depends in the country, if the telco in your country uses 800-900mhz band for GSM/LTE wireless connection, avoid zwave, might as well stick with wifi or zigbee, I tried it, it sucks and I can only have reliable connection on it if its close to the router (2-3meters), in long distance it still works but a single cellular call can take those device offline and takes some time to recover.
@emmgeevideo
@emmgeevideo Жыл бұрын
I've been in the computer networking industry since 1983. This video (and similar ones) remind me of the state of the industry before TCP/IP. Before widespread adoption of TCP/IP as the lingua franca of networking, IBM, DEC, HP had their own proprietary networks and each touted why it was better than the others and why you should standardize on them. But these vendors also started using TCP/IP and in the 90s, particularly as the Internet started to grow, proprietary protocols began to fade because of both vendor adoption and customer adoption. A vast network that supported a vast number of devices from many vendors was just superior to the alternative. You were somewhat dismissive of Thread and Matter, but it feels like the TCP/IP story again to me. Soon vendors will realize that it's better to support an industry-support networking protocol and operating stack and discussion of Zigbee will be as quaint as discussing IBM's SNA. My home network supports Wi-Fi, a little Zigbee, a lot of Lutron, and some Thread. My experience with Zigbee probably isn't great because as you say, it isn't super-standard. I have 4 mesh Wi-Fi radios in my house, so signal strength and capacity isn't an issue. I think a far more important decision today is what kind of automation framework to use. I use HomeKit because I've been an iPhone, iPad, and Apple TV user since the beginning and it's easy (for me) to implement and use. I don't care for Amazon or Google to be listening into my home automation. I've wanted to try Home Assistant, but honestly I don't want to spend all the time learning the ins and outs and reading discussion groups. Also, my automation needs are pretty simple. I think home automation is a really fun topic and there is so much that can be done with it. For the average person, discussions of protocols and megahertz and hubs go way over their heads. And why not? I think that's what will be the reason Thread and Matter will become the TCP/IP of home automation. It will eventually remove the need for wonky discussions and head scratching. You'll pick a device based on functionality, quality, and price and you won't care Z-this or Wi-Fi that.
@pjohnson21211
@pjohnson21211 Жыл бұрын
re: Bluetooth. I found a nice use case for it in my house...use the little Xiaomi Thermometer LYWSD03MMC flashed and places around the house. I have a small enough house this works well for me and love having a display were I can immediately tell temp and humidity.
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Sensible use case! How do you find the thermometer accuracy and overall build quality? I've not used one myself!
@pjohnson21211
@pjohnson21211 Жыл бұрын
@@HomeAutomationGuy build quality is fine..... battery life will probably end up being 6months max. Accuracy is fine...more interested in trends. Bought in bulk from AliExpress so less than $5 US each
@FerdinandoLM
@FerdinandoLM Жыл бұрын
Z-Wave has recently gone Open Source, so that every manufacturer can freely produce products without certification. Also, there are some companies working on the interoperability between matter and z-wave. This could lead to cheaper and more variety of sensors and devices with zwave
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
I didn't know that, what great possibilities that would bring!
@KameraShy
@KameraShy 10 ай бұрын
@@HomeAutomationGuy As well as catastrophes that do not work.
@christophl.4531
@christophl.4531 Жыл бұрын
which zigbee plugs with power monitoring do U recommend ?
@hassanahmad9597
@hassanahmad9597 4 ай бұрын
if my accessory don't build in home but my my hub connect to HomeKit, can i use those accessory in apple HomeKit app and Siri?
@74357175
@74357175 Жыл бұрын
I hope Thread will succeed like USB did: Initial growing pains, but eventually worked as designed
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
I agree - we're just not quite there yet!
@georgeseese
@georgeseese 11 ай бұрын
You explained Bluetooth, Wi-Fi, Z-Wave, Zigbee, and Thread. How does MQTT fit in? Isn't that a protocol for IoT networks? Therefore I don't understand "Zigbee2MQTT".
@peterrimmer551
@peterrimmer551 Жыл бұрын
so, good video, thanks. For z-wave, if the company discontinues their app then you get no hub access and therefore no access to the devices. D-link not long ago discontinued their support, and not nothing works until I make the effort to find a hub that they will connect to. Any ideas?
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
You can use Z-Wave devices natively with Home Assistant using a USB Dongle. I think it works the same with Hubitat.
@afriquedemain882
@afriquedemain882 11 ай бұрын
I've very good learned that, but I do need a practices experiences. How could you present us One ?
@FahmiiYusof
@FahmiiYusof Жыл бұрын
Do you also have issues finding reviews on ZigBee bulbs that works on 240v? I've been using aqara tunable white but they aren't the brightest and has no power on behavior. Most of the reviews on KZfaq are American brands so idk if I can use those.
@iceman0212
@iceman0212 Жыл бұрын
Planning for a ZigBee - HomeAssistant setup for my new home! Wanted to get a ZigBee dongle, would you recommend the SkyConnect? Wondering how it compares to ConBee or Sonoff!
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
I've used both the Sonoff and Sky Connect and they're great. I'm sticking with the Sky Connect so I can use thread in the future without changing my hardware, but otherwise I'd be sticking with my Sonoff!
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
I've never used a ConBee, but many others swear by them
@iceman0212
@iceman0212 Жыл бұрын
@@HomeAutomationGuy thanks! Will see if I can get my hands on the sky connect 😊
@bat3332
@bat3332 Жыл бұрын
@Home Automation Guy. May I know what is your take on LoRa technology given that it has the longets range of all with half an kilometer and yolink seems to have good products with Lora. And it comes out of the box homes assistant enabled as well. Please do a video on LoRa there seems to be limited videos on it. I can personally vouch for yolink products after using for a year
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
I live in London, where my house is about 5m wide and 8m long... I don't really have much experience with LoRa as I don't really need any long range protocols - sorry!
@basdfgwe
@basdfgwe 10 ай бұрын
If you are starting out with your home automation probably best to make sure that your devices will be thread/matter compliant and the vendor like aqara promises to enable your devices.
@HomeAutomationGuy
@HomeAutomationGuy 10 ай бұрын
But it's also important to know that your Zigbee network will keep working fine even if Matter or Thread become more popular and dominant
@tex24
@tex24 Ай бұрын
Do you have a video covering your home network including router that you use?
@HomeAutomationGuy
@HomeAutomationGuy Ай бұрын
I have one on my home network, but I don't go into too much detail about the router
@smarthomesmart
@smarthomesmart 2 ай бұрын
my zigbee the device connect in one zigbee gateway so, i cant adding by device one by one to HA my local tuya. please help
@DaveMathijs
@DaveMathijs Жыл бұрын
Which make/model contact sensors can interact with IKEA DIRIGERA?
@Anonymouzee
@Anonymouzee Жыл бұрын
Uuuuuuffffffffffff.... Zigbee it is then... let's rock!!!
@shandradm911
@shandradm911 Жыл бұрын
hello I have an two assistant in two places how to open them without entering the password and User?
@ArtificialJetleg
@ArtificialJetleg 13 күн бұрын
Are lutron caseta’s propriety connectivity based on z-wave/zigbee?
@HomeAutomationGuy
@HomeAutomationGuy 13 күн бұрын
I don't think so, I think it has its own protocol.
@seanmcdermott9546
@seanmcdermott9546 Жыл бұрын
I find some Zigbee products too Frustrating - The Mesh doesn't work for some products and works great for others - I have INNR Hub and sometimes i can add their bulbs / plugs and other times i can not - With my Aqara M2 Hub i have no issues adding their products but they do not sell Plugs / Bulbs in the UK so thought i would try INNR - Most of my plugs / Bulbs are TP Link Wi Fi which i was hoping to replace to local by going the ZigBee route - Perhaps i am just unlucky re my INNR hub and should have gone with a different company
@shreyanshkesharwani
@shreyanshkesharwani 6 ай бұрын
I have a question, Can you use Bixby Or Google Assistant or Alexa or Siri, to control these devices connected to home assistant? Can you turn on/off these device to check if everything is off when outside of home? I remember you saying that these devices will be offline and not be able to talk to internet.
@HomeAutomationGuy
@HomeAutomationGuy 6 ай бұрын
Yep, you sure can. I can control my Zigbee lights that are connected directly to Home Assistant from my Google and Alexa
@TheJoaolyraaraujo
@TheJoaolyraaraujo Жыл бұрын
I’m still gonna wait for Thread since it’ll be a option. That way I don’t have to learn ZHA to have a single Zigbee network. I have no issues with hue zigbee. Since I’m moving. I’ll buy more than 20 motion sensors, wall switches etc. I’ll wait thread. I’ll invest a lot every outlet and switches will be smart. I know the best devices it’s the one you can buy today. But I feel we’re a year or two away.
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Yeh, I think a year or two is a good estimate. But I want a smart home now! 🤣
@muratje
@muratje 10 ай бұрын
Are you completely on ZHA or Z2M with the SkyConnect?
@HomeAutomationGuy
@HomeAutomationGuy 9 ай бұрын
Zigbee2MQTT
@KameraShy
@KameraShy 10 ай бұрын
Very interesting and informative. BUT ... for me X-10 is the way to go and has been since the 70's. Still works solid and reliably. Just not "smart" enough for some people, I guess.
@PeloquinDavid
@PeloquinDavid Жыл бұрын
I'm hoping to move away from WiFi and toward Thread (when devices become more widely available and affordable: so count me out too as far as "Eve" is concerned) and I already use a lot of Zigbee devices (switches, sensors, plugs, bulbs) that work with both Smarthings and Hubitat (and/or with Aqara hubs): I use all three. Since things seem a bit chaotic in the world of Matter-over-WiFi these days, it makes even more sense to avoid new WiFi devices and instead to focus on building up my Matter-readiness this year (especially by adding mesh WiFi access points that also support Zigbee and will act as Thread border routers). If I do pick up any devices this year that aren't Thread-based (I'm definitely in the market for a few new smart dimmer switches), they'll definitely be Zigbee ones, however. I may also try out IKEA's new "Dirigera" hub - especially if it looks likely to work as a proper Thread border router and offer redundancy as an extra Matter controller.
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
That's a sensible way to navigate this transition. All the best with it!
@EmperorTerran
@EmperorTerran 7 ай бұрын
>00:09 best dang smart home there ever was dont wanna be too mean, but when I see people use non-modular patchpanels, I think they are from the past or huge amateurs... but hey, me being mean is good for youtube alghorythm engagement and thnx for the informative video..
@HomeAutomationGuy
@HomeAutomationGuy 7 ай бұрын
I am from the past. Back when I was a sysadmin and network guy in my first IT job that's all we had - so I went with what I knew! Check out my latest rack video though, I learned from my subscribers and upgraded my patch panels
@FalcoGeorge
@FalcoGeorge Жыл бұрын
One other disadvantage of Z-Wave depending on where you live. Not all countries accept the same frequencies so unlike the 2.4ghz of zigbee, Z-Wave have different frequency standards depending on where you live. If you’re in the USA, having a large population, you’ll have a reasonable device selection. If you live in a country with an accepted frequency of lower population bases, you’ve got a poor device selection.
@Yggdrasil42
@Yggdrasil42 Жыл бұрын
Do you mean that certified z-wave devices aren't required to support all those frequencies?
@RR123
@RR123 Жыл бұрын
ZigBee's crypto is a bit basic and doesn't account for active attacks that much... Looking forward to matter over thread!
@spocksvulcanbrain
@spocksvulcanbrain Жыл бұрын
Can you control Zigbee devices remotely? Say from another city/state or even country?
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
That depends on what hub you're using. I use home assistant to control my Zigbee devices, and I can access Home Assistant from outside of my home. So using Home Assistant as a proxy, I can control my Zigbee lights from another country
@spocksvulcanbrain
@spocksvulcanbrain Жыл бұрын
@@HomeAutomationGuy Thanks. That's what I was asking... basically can you access and control all those devices when you're traveling. Thanks for responding.
@Hasse-swe
@Hasse-swe Жыл бұрын
I have the HUE motion sensor. I used the included AAA batteries in fo 1 month. Then i switches them out to rechargeble AAA batteries. Mutch better for the wallet. But they wont last that long as a non rechargeble batteries. I will Try to use as many rechargeble batteries as possible.
@74357175
@74357175 Жыл бұрын
WiFi: even though everyone has WiFi already, to make it secure via a private vlan or something similar is not usually a capability of typical existing routers, and it's much harder to set up
@Dutch79
@Dutch79 Жыл бұрын
I have a Mesh network with 5 Wifi AP's. So, using this network is a perfect 2-in-1 solution.
@vinkenwood8233
@vinkenwood8233 11 ай бұрын
it is pretty simple on Unifi devices
@qdaniele97
@qdaniele97 14 күн бұрын
The problem with z-wave is that the around-900mhz part of the radio spectrum is already reserved around the world for various thing (such as some cell networks) and the few frequencies that are free to use for thing like z-wave are not the same in different countries: It's usually around 915mhz in the US and 868mhz in Europe. That means the z-wave devices made for the US market won't be able to talk to those sold in Europe and viceversa. And that's a big drawback for me, living in Europe: Most resources online are about the US versions of products, many devices aren't even available in EU versions, for some you won't even know which one you are getting untill you actually have them in your hands, etc. Way too inconvenient
@divyamtaparia4115
@divyamtaparia4115 10 ай бұрын
What is your take on wired vs wireless automation?
@HomeAutomationGuy
@HomeAutomationGuy 9 ай бұрын
Always go for wired when you can
@divyamtaparia4115
@divyamtaparia4115 9 ай бұрын
@@HomeAutomationGuy i have an option to go for knx platform with a device called control4 or should i go for individual apple home kit devices?
@georgeseese
@georgeseese 11 ай бұрын
Are these terms comparing apples and oranges? Bluetooth and WiFi (along with Ethernet) were standards defined by IEEE in 1980. MQTT was invented in 1999 for sensor sub/pub networks, now needed for home automation. Isn't it just a different layer? The sub/pub idea is used in KZfaq where we subscribe to a channel. Bluetooth is peer to peer, not MQTT. I imagine MQTT could operate on a cable network with no wireless technology. Aren't Zigbee, Z-Wave, and Thread versions of MQTT? Mosquitto is another version. What does “Zigbee2MQTT" mean, as if Zigbee is not MQTT? Need clarifications from the Home Automation Guy.
@shacharh5470
@shacharh5470 Жыл бұрын
Use 5GHz WiFi, shouldn't be interfering with ZigBee, right?
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Correct. Only the 2.4GHz messes with Zigbee. Sadly a lot of smart devices still only work on 2.4 and not 5
@pjh2599
@pjh2599 Жыл бұрын
I assume you are American. Are you aware that in the UK a 'router' is a milling device, whilst a 'roo-tah' is the digital gadgets I think you are speaking about?
@gunnargu
@gunnargu Жыл бұрын
Thread feels much less "searchable" as it is just thread, now a new word like "Zigbee"...
@Cyberbeni
@Cyberbeni 5 ай бұрын
So you explained why wifi devices having internet access is bad but then said you would switch to Thread in the future. I don't understand that. Why would you let devices from random companies connect to your home network when Zigbee already solved this issue? The only way Thread becomes viable is if they change it to also fully separate from your network. But then it's still pretty much just a Zigbee reskin.
@HomeAutomationGuy
@HomeAutomationGuy 5 ай бұрын
I would run them on my IoT network, which is firewalled off from the internet
@RMazurowski
@RMazurowski Жыл бұрын
What about LoRa protocol?
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
I live in a house in London, it's about 4 meters wide and 8m long. I haven't really got a use case or environment to test it unfortunately, so I didn't comment
@maxking3
@maxking3 Жыл бұрын
No mention of KNX? The only global smarthome standard with guaranteed compatibility between 8000 devices from 500 vendors, used not only in residential buildings but in hotels, skyscrapers, airports, luxury homes and super yachts? Go and see the Jung showroom in London and see how professionals do smart homes. Seriously, that would be quite awesome content - comparing a 30y old standard that has sold over 50 billion pounds worth of kit and provided a roadmap for another few decades, with the home user, retrofit China junk that every one else is talking about…
@PhrontDoor
@PhrontDoor Жыл бұрын
I dislike zigbee in that it makes it almost impossible to send/receive information via simple command line without ridiculous multi-level interfaces. It's like buying a toaster, but you can only use it by hiring a maid and a butler, and having to ask the butler to tell the maid that you want toast.
@laborspy
@laborspy 4 ай бұрын
I had Thread buttons and they were junk. They died in under a month.
@HomeAutomationGuy
@HomeAutomationGuy 3 ай бұрын
That's a shame
@mrxmry3264
@mrxmry3264 Жыл бұрын
1:42 whoa, little red flag goin' up! why use wifi for stationary devices like computers and printers when wired ethernet is a superior option? 4:13 i wouldn't use wifi for security cameras. again, wired ethernet is a far better option. 4:31 thats why i build my own network from components, in my case from the unifi range. 5:16 that's what i want to know. needless to say that i would not even think about using a device like that.
@Larry67902
@Larry67902 Жыл бұрын
Sometimes wiring takes a lot of either time or money (or both) to do. For example in my home the walls have solid foam insulation in them making it very difficult to install any kind of wiring inside of them. Of course i could install wiring tracks down the outside of the wall but it would require more money and my wife has already vetoed the idea anyway, (ugly was thrown around a time or three). Anyway wifi is more logical in my case then the time (and or money) it would take and the wife approval factor is a requirement as well.
@lewiskelly14
@lewiskelly14 Жыл бұрын
Matter doesn't matter
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
It will to some people, eventually
@dpn1604
@dpn1604 Жыл бұрын
Ha, if you are going to make a point about Zed Wave vs Zee Wave then use [rooter] rather than [rauter].
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
As an Australian, I just can't bring myself to say "rooter" with a straight face
@technerd9655
@technerd9655 Жыл бұрын
Why?
@technerd9655
@technerd9655 Жыл бұрын
​@@HomeAutomationGuy as a Canadian, I whole heartedly agree! Z[ed] and "rauter"
@ThePentosin
@ThePentosin Жыл бұрын
Hue without the hub sucks. Hue Bluetooth is a terrible place to start.
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Native Zigbee for me is the sweet spot
@BriaandMatt10
@BriaandMatt10 Жыл бұрын
im Wi-fi all the way
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Nothin' wrong with that. If it works for you, then that's all that matters!
@regularSenseAppeal
@regularSenseAppeal 2 ай бұрын
You let out wifi as a protocol.
@HomeAutomationGuy
@HomeAutomationGuy Ай бұрын
Did I?
@turdferguson7686
@turdferguson7686 Жыл бұрын
random question. why is it "zed way" but "zigbee".... never understood the z = zed thing, especially when it is only said as zed when its just the letter. b isnt bed, f isnt fed, why is z zed?
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Yes, but B is "Bee" and F is "Eff". Potato is potato and tomato is tomato 🤷‍♂️
@turdferguson7686
@turdferguson7686 Жыл бұрын
@@HomeAutomationGuy lol sort of, yes. Maybe its a mystery meant to stay a mystery.
@PaawanS
@PaawanS Ай бұрын
It’s called zed because it was called zeta in Latin. zeta is also the name for a Greek letter, which is where Latin got it from.
@Alphasig336
@Alphasig336 Жыл бұрын
The first problem complaining about wifi router is ridiculous. Anyone starting a smart home should upgrade router and access points. Your streaming and personal devices should only use 5 GHz network and smart devices in 2.4 GHz. Though I agree on speed of cloud based devices, but not really noticeable.
@Yggdrasil42
@Yggdrasil42 Жыл бұрын
I wouldn't call it ridiculous. Of course upgrading your wifi is smart but consider the target audience. 90% of people know they "have wifi", and don't care how it works or how to improve. And to be honest, I don't think they should have to.
@Kospolotan
@Kospolotan Жыл бұрын
@@Yggdrasil42 Sorry i dont agree with you. When someone is starting their smarthome, they should know that good wifi signal is the most important of their new jorney :)
@axsdenied9416
@axsdenied9416 Жыл бұрын
250 kbps isn't "faster" than 100 kbps. In the context of what matters for IOT devices, fast is time it takes to move 1 bit of data from source to destination. It IS however able to carry more bits at one time, allowing more parallel tasks at once carried through the mesh.
@Richard_GIS
@Richard_GIS Жыл бұрын
But you are explaining it to yourself that this is fast then too when they dont have to line up but get processed parallel
@ImBatman83
@ImBatman83 8 ай бұрын
@axsdenied9416, 250kbps IS faster than 100kbps. kbps = kilobits per second. The time rate is the same (per second). Therefore, more work is done in the same amount of time (150kb more work in the same 1 (per) second).
@Voultar
@Voultar 8 ай бұрын
You're confusing rates with weights.
@davorzdralo8000
@davorzdralo8000 6 ай бұрын
​@@ImBatman83no. That is throughput, not speed. Speed is latency, not bandwidth.
@ImBatman83
@ImBatman83 4 ай бұрын
⁠@@davorzdralo8000latency is delay. If you have significant delay in your network, that’s a totally different issue. All things being equal (same latency), 100kbps IS faster than 10kbps. Period. the amount of delay in a proper WiFi unit is imperceptible to the average person.
@PerMejdal
@PerMejdal Жыл бұрын
sound is terrible, next video.
@HomeAutomationGuy
@HomeAutomationGuy Жыл бұрын
Sorry, I'm not a professional at this. Can I ask what's wrong with it so I can try and fix it for the next one?
@turdferguson7686
@turdferguson7686 Жыл бұрын
@@HomeAutomationGuy the speaking part of the audio is just very low. had to turn my sound up about 25% compared to the last yt video watched. though that one was paul hibbert who tends to have louder audio lol the transition music @2:00 was much louder than the audio, maybe more of the level the speaking should be. having turned the audio up to hear the speaking made that transition music extra loud. i assume that is what the other drive by complainer was getting as well.
@lilstubthumb
@lilstubthumb Жыл бұрын
Zigbee is the technically inferior technology. Shame Google put their eggs in that basket.
@zunfren
@zunfren Жыл бұрын
How is zigbee inferior? Because of the frequency?
@technerd9655
@technerd9655 Жыл бұрын
Zigbee is an industry standard. IEEE 802.15.4, part of the IEEE 802 LAN/PAN/MAN standards family. Even if technically inferior to Zwave, being an open standard and not a proprietary closed standard, it inherently makes a little more sense and can provide great benefits (provided the technical deficiencies are not significant). I'll take the standard thank you.
@technerd9655
@technerd9655 Жыл бұрын
🤦‍♂️ from an IT perspective where do I start? Well, I'll start with the good...Z[ed]wave!!! Thank you! Z[ed]! Not zee! Z[ed]! ok, now the bad. 1) No, your printer and computer do not NEED to be on the same WiFi network, this might be the case, but it's not a requirement. Your home or office network is called a LAN (Local Area Network). Your Internet is called a WAN (Wide Area Network). Your WiFi is called a WLAN (Wireless Local Area Network). Your LAN is managed by your router, generally this is a wired LAN 99.9999% of the time. WLAN is almost 99.9999% dependendant on a wired LAN. LAN generally physically relies on ethernet cable (CAT5/5E/6/6A/8 using RJ45 connectors) and ethernet based protocols, also known as TCP/IP protocol suite. Even if you use MoCA (Media over Coax), Powerline Networking (PLC, typically HomePlug), or HPNA (home phone line networking, old and slow technology), these are all physical mediums and ethernet/TCP/IP is encapsulated (same with WiFi) inside the PHY protocol, these are all part of your LAN. Anyways in order for 2 devices to talk to eachother (the computer and printer example), neither NEED to be on the same WiFI WLAN, they just need to both be on your LAN, preferably both using a wired technology, ideally regular ethernet cable, if it's a desktop computer and a stationary printer. Wireless ideally should only be used when mobility is required, stationary devices, ideally should ALWAYs be wired. Not just because wired is ALWAYS superior to wireless when mobility is not required, but it's also more secure, harder to hack or jam (flood the radio band with noise). I know wireless technologies are more convenient for retro fitting, mostly due to device cost, device size, and ease of installation, but also due to terrible customer education because of misleading (even false) advertising (so bad ISPs here in Canada advertise internet service as wifi, not as internet, which should be illegal), wireless is perceived by the average consumer as better, and therefore, that's what they demand, impacting the supply and demand portion of the device costs. In terms of security and reliability, I want to see more wired devices. Especially if the device requires wired power (either with a wired adapter providing DC or direct AC mains), if you're already connecting one wire, might as well use it for data as well (even if this requires another adapter to connect to etherner somewhere on the network or direct to the router/main switch). Or better yet, go PoE (Power over Ethernet, ideal, especially if cost is no object for both the device and installation). MoCA 2.5 and soon 3.0 are awesome tech with none of the drawback of powerline networking (RF issues with wifi and Amateur HAM radio, not really an issue as far as I am aware in North America, but apparently considered a major problem in the UK) but dependent on already installed RG-6 coax (can work on RG-59, but will be slower) which is not quite as common as electrical wiring due to fewer outlets, but also more expensive and excessive bandwidth for IoT smart devices. I'd like to see HomePlug Green PHY for IoT (released over 10 years ago) which can coexist with regular HomePlug AV500 to AV2 2000 standards for high bandwidth use while using much lower power (and likely a lot less RF noise produced mitigating the potential interference issues mentioned above). This Green PHY spec was designed to be low cost, small, and specifically for IoT devices, but never took off due to the demand for wireless. This tech would be perfect for smart light bulbs, smart switches, smart power receptacles, devices already guaranteed to be connected to AC mains. Sure there will always be a need for wireless IoT smart devices, these can use matter over zigbee/zwave/BLE/IP (ultimately if it's wifi, it's TCP/IP, same as wired ethernet). Some (not all) of you're HomePlug Green PHY switches/bulbs/receptacles can also support your preferred zigbee/zwave/ble (could do wifi also, but this would not necessarily be ideal because you should have PoE powered ceiling mounted wireless access points, or whole home mesh kit using powerline AV2 2000 or wired ethernet gigabit/multi-gigabit backhaul, and IF the smart device was used as a WiFi access point, it needs to be AV2 2000 not Green PHY to handle the bandwidth required by wifi devices). I know Insteon did/does make X10 based powerline networking smart IoT devices, but these are not based on a standard resembling anything modern, nor is it using TCP/IP. Yes, the above setup would be more expensive, but it should all be available. IMHO, all smart IoT devices should have an IP on the network, should be pingable (from within the network) and seen by the router. Whether the IoT network needs to be a VLAN on a home network, that's debatable. I'm a fan of KISS on home and small office networks, so generally avoid VLANs since they add complexity (on larger office networks, for VPN networks, for guest wifi, you want a VLAN). As for using the ISP provided router and wifi equipment. Unless you only have 1-5 devices total on your network, you should pretty much ALWAYs buy your own third party router and wifi equipment (I typically use Ubiquiti UniFi equipment). If you are investing in smart IoT devices like these, then it should be considered HIGHLY recommended to get your own router and wifi equipment. Generally I recommend using major networking device manufacturers and not Google Nest, Amazon eero, or relatively unknown manufacturers. I'd go with TP-Link on a tight budget, Linksys/Netgear/Asus if a reasonable budget, or Ubiquiti UniIf if you have a healthy budget and existing ethernet wiring or can afford to install new wiring. TP-Omada (have not had the chance to try this yet, but comparable to UniFi) is also viable.
What is Zigbee?
8:53
Home Automation Guy
Рет қаралды 28 М.
The best and worst decisions I made for my smart home
17:03
Home Automation Guy
Рет қаралды 37 М.
когда одна дома // EVA mash
00:51
EVA mash
Рет қаралды 12 МЛН
FOOTBALL WITH PLAY BUTTONS ▶️ #roadto100m
00:29
Celine Dept
Рет қаралды 18 МЛН
Improve Zigbee network performance and stability with these 3 tips
11:41
Home Automation Guy
Рет қаралды 165 М.
Smart Home Protocols: Thread Explained!
10:12
Everything Smart Home
Рет қаралды 55 М.
Building a smart home network
12:47
Home Automation Guy
Рет қаралды 138 М.
Ultimate Guide to Starting and Growing a Smart Home in 2024!
14:34
Smart Home Solver
Рет қаралды 223 М.
Fixing my Zigbee with a network Zigbee coordinator
10:41
Home Automation Guy
Рет қаралды 29 М.
Set up Zigbee in Home Assistant - Using ZHA to ditch your 3rd party hubs
12:27
Which smart light switches are the best?
23:07
Home Automation Guy
Рет қаралды 255 М.
You Should(n't) Care About Matter For Your Smart Home
10:26
Everything Smart Home
Рет қаралды 78 М.
The Best Smart Home Products Coming In 2024 (Don't Miss Out)
21:01
Automate Your Life
Рет қаралды 159 М.
Tự vệ 7,self-defense #muaythai #SOSGMA #self_defence
0:12
Vệ Sĩ S O S
Рет қаралды 43 МЛН
Hahaha nossos queridos irmãos mais novos❤️ marca eles aí
0:31
Nicole Louise
Рет қаралды 34 МЛН
Удивительно маленький байк😱
0:33
FilmBytes
Рет қаралды 12 МЛН
#xursandbek #спецтехника #rek
0:20
XURSANDBEK
Рет қаралды 4,3 МЛН
Does Size Really Matter?
0:54
Mini Katana
Рет қаралды 66 МЛН