SMEDING NON VGT DROP IN 6.0 POWERSTROKE! WILL IT LIVE!
Рет қаралды 15,855
Жыл бұрынExciting video as we test out the new smeding diesel drop in non vgt turbo! We spec our turbo out as a 64.5 billet compressor wheel with 360 heavy duty thrust, 68mm exhaust wheel and .70A/R housing. We go over the turbo and installation. Then we RIP this turbo to see what it’s made of!
Truck in Video
155/30 injectors
35in tires
LIKE SHARE COMMENT SUBSCRIBE
VISIT THE WEBSITE!
leftlanediesels.com/
FOLLOW ME ON INSTAGRAM
left_lane_cbull
Keywords
Race truck
Rolling coal
Built diesel
Stanced out
Cammed out
Hood stack
Straight piped
Loud turbo
Big turbo
Twin turbo
Loud exhaust
Kc turbos
Ported intake
No limit
6.0 powerstroke
Cummins diesel
12 valve
Duramax diesel
Huge burnout
@adamslape5963 Жыл бұрын
That truck sounds good too. The turbo was louder than what I thought it would be. Cody your content is fantastic man.... Really appreciate all these videos you do for us.
@LeftLaneDiesels Жыл бұрын
🙏🙏🙏
@tonye1524 Жыл бұрын
Love seeing your videos man your our only 6.0 guy on here that does videos like this keep it up bro 🤙🏽
@LeftLaneDiesels Жыл бұрын
🙏🙏
@janamaro5894 Жыл бұрын
I really love Smeding Diesel and MDC Diesel are both the same kit. I bet Mack from MDC Diesel is a phenomenal man.
@georgesrisomsak9650 Жыл бұрын
You know what works really good to keep boots on pipes? Clean with brake clean, then a very light coat of Permetex high ttack spray. It's red in color(the product). I've NEVER had boots blow off. I've installed hundreds of cac boots, never had a single one come off with this method. I have seen them blow apart, but they never slid off the pipe. Sounds like this turbo light stupid fast! I was skeptical, but this seems like a good setup if you want to roll non vgt.
@tylerkellogg2294 Жыл бұрын
Wow Cody your neighbors must love when your in test and tune mode
@LeftLaneDiesels Жыл бұрын
😂they love me, I bring joy to their lives
@Bacongrease00 Жыл бұрын
Cody can we get an update on the turbo performance? How have EGTs been affected? How does it spool? Any issues ?
@bradleymchan 9 ай бұрын
I absolutely love your content! Where did you purchase this turbo? What tune are you running? Who wrote the tune?
@johnnycortez46 Жыл бұрын
Just got your up pipes in the mail. Awesome quality. Super fast shipping 👍👍👍 However I have a question in regards to a engine build. On your previous 6.0 engines builds when u replaced the lifters and guides. Did you use the Oem stock ones from ford???
@GearJamminHank Жыл бұрын
So that's what that sounds like! I've never hear a tube let go.
@burnout245 Жыл бұрын
Video didn't do any justice, thing sounds like a shotgun going off under your hood in real life, enough to make you jump in your seat
@scubasteve7946 Жыл бұрын
Nice work and video. She sounds nasty 👍. Might need a dyno session in the future. I like rerouting the CCV to help prevent those boots from getting only and blowing as easily. What's your thoughts on that?
@adamcarlson1255 Жыл бұрын
Cody, what tune are you using on the daily? I have plan on using a very similar setup. I have an sct ts livewire as well
@Wyatt_obs7.3 Жыл бұрын
Definitely gonna do it to my daily lol my trans hates life too 🤣
@LimaTangoZulu Жыл бұрын
I can’t wait to get a 60mm for my ZF6 truck.
@michaelroth3471 Жыл бұрын
Cody - Mikalor clamps will solve those boost tube blow offs, no hair spray needed.
@dylantylerday1 Жыл бұрын
What turbo u like better ur non vgt dyi stage two or the smeding turbo
@damonclemons9547 26 күн бұрын
How has the turbo held up?? I am looking to get a drop in s300 from smeding for my 6.7 psd just wondering about the reliability in the long run
@bradeng9130 Жыл бұрын
I’m looking to buy one of these turbo but I was wondering do I just leave the vgt plug or is there a way to remove it completely
@michaelsacy Жыл бұрын
Can you do a updated video for us that wanna do this swap ourselves. Was it still worth it
@kshepthedrummer Жыл бұрын
I can't imagine the drive pressure is very good with that little exhaust housing. The exhaust housing looks smaller than the one on my 1.8l Honda.
@Bacongrease00 Жыл бұрын
It’s a .70 A/R
@gtijoemcnair Жыл бұрын
Does the funky music come with the turbo
@matthewlolmaugh5900 Жыл бұрын
Do you need any sort of tuning to run this turbo I was told you need pcm tuning
@GearJamminHank Жыл бұрын
“OMG, Damnit Cody"! 😂😂😂😂😂😂😂😂😂😂
@LeftLaneDiesels Жыл бұрын
Super rowdy! I put it in the ditch hahahaha
@GearJamminHank Жыл бұрын
😂😂😂😂
@brettkennelly1322 9 ай бұрын
Id be really curious to what its like towing
@alanbeatty7410 4 ай бұрын
Curious did you have to get your pcm tuning?
@irock3018 Жыл бұрын
What is it like for towing?
@tylerbanning4099 Жыл бұрын
Could you run this on stock injectors with tuning
@jillianhoffman8854 8 ай бұрын
Did you end up keeping this turbo ?
@dannypontv Жыл бұрын
What was the max boost you made
@braddurham145 Жыл бұрын
I thought it would have more black smoke but was wrong that is awesome
@LeftLaneDiesels Жыл бұрын
It cleans these 155/30s up no problem. I was amazed. I see now they are rating it for up to 550hp (64.5mm turbo) and I believe them with how well it’s cleaning these injectors up. I could feel it ran out of fuel during these pulls, but turbo was ready for more
@joshheld2090 Жыл бұрын
@@LeftLaneDiesels do you think the 364.5 with 175/30s would be a good pair with some occasional towing
@LeftLaneDiesels Жыл бұрын
@@joshheld2090 100%- I think 175/30s are going to be the perfect match for the 64.5 sized option
@joshheld2090 Жыл бұрын
@@LeftLaneDiesels super cool. the price is hard to beat so i’ll probably pick on up soon unless they start blowing up out of nowhere for other people
@LeftLaneDiesels Жыл бұрын
@@joshheld2090 I’ll certainly be putting the miles on it. Likely a follow up video after 5k miles
@davidwells2848 Жыл бұрын
Cody, how did you finally address the odawg 3 and the 12an fitting that sits under it. Used a low profile 90* and just not enough clearance to snug it down so getting seepage. Can I dremel down the intake a bit or is there another way l see in video you have a 45* thanks for any advice
@LeftLaneDiesels Жыл бұрын
www.amazon.com/XRP-984512-Male-Flare-Ring/dp/B00411W4NU/ref=mp_s_a_1_1?crid=2J9WY0C9EL7RN&keywords=xrp+984512&qid=1678237704&sprefix=xrp+984512%2Caps%2C167&sr=8-1
@davidwells2848 Жыл бұрын
Thanks so much. You always think this is the fix and it rarely is. The internet has so little relevant info. Xdp who would have thought
@GearJamminHank Жыл бұрын
Turn on the shop exhaust fan!!! 😂😂😂😂
@Bacongrease00 10 күн бұрын
Any updates bro???
@michaelsacy Жыл бұрын
So I been thinking about this set up also. With the MCD/smeding Is it legit. Or a waste of money and should just get the more expensive one. And also is it gonna be good with stock injectors.
@janamaro5894 Жыл бұрын
Right, I know the pros and cons for Smeding and MDC Diesel.
@michaelsacy Жыл бұрын
Which are ??
@janamaro5894 Жыл бұрын
@@michaelsacy Both of them are decent good price.
@OutdoormanPost 10 ай бұрын
Since the 6.0 doesn’t have a waste gate and uses the VGT to control boost is there a concern with overboost?
@denvermedick9876 5 ай бұрын
For normal headstuds I think yes but if it’s studded it can handle up to around 75 psi of boost before stretching the studs
@GunFarm1776 11 ай бұрын
Are these made in China? I'm on the fence, just bought your up pipes, showed up today. Nice looking pipes! Considering going Nonvgt. Thanks
@janamaro5894 6 ай бұрын
No, Smeding Diesel is made of materials for building turbos, manifolds, and components. They're proudly built in the USA.
@kwhopper5409 Жыл бұрын
So is this turbo better than a kc 10 blade turbo??
@LeftLaneDiesels Жыл бұрын
This is almost impossible to answer, it comes down to personal preference and what you are using the truck for. There’s advantages and disadvantages between vgt and non vgt
@lukedougherty7078 Жыл бұрын
Converter is locked tryna pull thru the gear
@chrisrogers8694 Жыл бұрын
when going from a VGT to a non VGT is there any programming that needs to be done?
@michaelsacy5849 Жыл бұрын
I would like to know this too
@caelchurches9393 Жыл бұрын
Yes you need custom tunes
@HSKFabrications 9 ай бұрын
Yes
@aaronsexton6434 3 ай бұрын
@@caelchurches9393 what needs changed?
@dakotathompson8062 Жыл бұрын
I’ve heard these drop in turbos suck. What’s so bad about them ?
@jace1414 Жыл бұрын
They aren't actually as bad as people make them out to be. Are they borg or precision quality maybe not but they are not bad products.
@jace1414 Жыл бұрын
I'm just excited about having the case and you can do anything to it that they do too other 363SXE turbos
@TreyMulder Жыл бұрын
How much boost did the diy stage 2 make, i cant find much info on them
@LeftLaneDiesels Жыл бұрын
It would peg the factory map sensor which maxes out at 28.9psi. I really need to get an aftermarket boost sensor.
@TreyMulder Жыл бұрын
@@LeftLaneDiesels thanks for the response I’m highly considering the diy stage 2 I think it’s definitely worth the cost savings
@ivorymack1272 5 ай бұрын
Update ?
@huronhockey8 5 ай бұрын
Are you tuning after going from vgt to non vgt?
@LeftLaneDiesels 5 ай бұрын
Yes absolutely
@henrytheboss2658 Жыл бұрын
i have 205/75 injectors how do you think it would pair with this turbo?
@LeftLaneDiesels Жыл бұрын
No unfortunately I think it would be way to much fuel. I’m thinking the cut off for this turbo will be 190/30
@Bacongrease00 Жыл бұрын
The biggest wheel they say is only good for 550 so you wouldn’t clean up those injectors just not enough air
@LeftLaneDiesels Жыл бұрын
@@Bacongrease00 Your point is true, but tell me, when are you driving around at WOT using all your available horsepower??? Or have us diesel guys never had more injector than turbo???190/30 is good for 600hp on a all out tune at full throttle. However your everyday driving, this turbo should be perfect! Just realize that it won’t clean up 190/30s on the top end.
@Bacongrease00 Жыл бұрын
@@LeftLaneDiesels true! It’s all about the left foot! I’m excited I kinda want to try one.
@dylantylerday1 Жыл бұрын
I’m trying the 205/75 can let you no I went through blessed performance they give free tunes with it
@danenewlin4401 Жыл бұрын
whoes tuning
@BigBull9788 Жыл бұрын
What bumper is that??
@LeftLaneDiesels Жыл бұрын
MOVE bumper-welded together by me. I didn’t follow the instructions, I made it my own
@stevenraymer6682 Жыл бұрын
What happens to the vgt plug ???
@LeftLaneDiesels Жыл бұрын
You just leave it, it doesn’t plug into anything anymore
@aaronsexton6434 3 ай бұрын
@@LeftLaneDiesels it doesn’t cause a check engine light?
@psdleach Жыл бұрын
The shop I work at has a dealer account with smeding. I’m about to order mine tomorrow fuggg it
@LeftLaneDiesels Жыл бұрын
You won’t regret it. What size injectors do you have and what size turbo are you thinking of ordering?
@psdleach Жыл бұрын
@@LeftLaneDiesels same as you, 155/30’s. I’ll get an identical turbo too lol. I also have a stage 2 cam. I’m gonna go with bigger injectors eventually but this setup is such a fun truck to drive and super street able. My buddy had a s364.5/68/.83 with 190/75’s and the truck was pretty fast and a good time but laggy as hell and ridiculously dirty. He’d be cruising at 60+ and smoke would just be rolling. With that being said I’m pretty sure he never got it retuned which would explain a lot of that
@psdleach Жыл бұрын
@@LeftLaneDiesels you gotta start selling “fixed vein gang” stickers now. I want a personal discount code on the site for that idea😂😂😂
@LeftLaneDiesels Жыл бұрын
@@psdleach I’m a huge 155/30 fan for your everyday guy that wants a good bump in power over just a tuned truck. I plan to bump up to 190/30 in the future, curious to know how this turbo will do on that large of injector. Hahahah I like your idea!!
@psdleach Жыл бұрын
@@LeftLaneDiesels I’m curious too. If they could configure that with larger compressor and turbines with the .70 I think it’d open up a few doors. I’m assuming they probably can’t because of fitment restraints like you mentioned in the video. I gotta get to work on getting a turbo and we both gotta work on figuring out how these will handle 190/30’s. I’m hoping they won’t be too much fuel cause I think that’d be a pretty badass daily/street truck. In all seriousness if you wanna make stickers like that feel free. We’re not in competition in anyway so it affects me none.
@neo1231 Жыл бұрын
Going to max out the turbo with no wastegate. Bye bye connecting rods 😵
@DieselObsession Жыл бұрын
Lol nah. Welcome to the diesel world bud
@choadspanker1 7 ай бұрын
Say you know nothing. Less stress on your fingers to just type that instead
@Bacongrease00 Жыл бұрын
Wanna sell me that DIY KC stage lol
@LeftLaneDiesels Жыл бұрын
I’m gonna hold on to it just in case… haha
@LimaTangoZulu Жыл бұрын
Would the cast 62 make better early power for towing?
@LeftLaneDiesels Жыл бұрын
I’m not going to recommend the cast 62 option to anyone. Being that all options come with the same exhaust wheel and turbine housing, you might as well go with the 63mm billet or sxe-r option if looking to run it on stock injectors.
@LimaTangoZulu Жыл бұрын
@@LeftLaneDiesels in short, does a smaller compressor wheel decrease lag?
@LeftLaneDiesels Жыл бұрын
@@LimaTangoZulu yes
@joshwebb609 22 күн бұрын
So pride month
@mikerumsey-dt2mv Жыл бұрын
I sent a message to you on Instagram, if you could answer some questions that would be awesome. Thanks
@l1insanity470 4 ай бұрын
Update?
Highway and Heavy Parts
Рет қаралды 20 М.
АРХИВ ИСТОРИЙ
Рет қаралды 1,7 МЛН