Smith & Wesson 686 Reassembly

Рет қаралды 113,175

9 жыл бұрын

Smith & Wesson 686 Disassembly : • Smith & Wesson 686 Dis...
Smith & Wesson 686 Cylinder Disassembly-Reassembly
• Smith & Wesson 686 Cyl...

Пікірлер: 135

@covertjy 8 жыл бұрын

Your wording of "the screw with the spring inside" saved me a trip to the gunsmith. My spring popped out while reassembling the yoke/cylinder assembly and I didn't know where it had come from. THANK YOU for the excellent video !!!

@MikeJack 8 жыл бұрын

Hi I am glad my video, saved you a trip to the gunsmith.

@douglasferris 4 күн бұрын

Thanks very much for your excellent video!! Your meticulous instruction and occasional tips eliminated my fear of disassembling and reassembling my Smith & Wesson 626 .357 Magnum and Smith & Wesson 629 .44 Magnum Revolvers. They do need a thorough cleaning every 500-1,000 rounds. Thanks again!!

@MikeJack 4 күн бұрын

👍😎

@99riverrat999 7 жыл бұрын

Really clear instructions in both the disassembly and this video. Thanks for taking the time to make these videos. Very helpful.

@MikeJack 7 жыл бұрын

you're welcome, I'm glad you like my video.

@geezerp1982 6 ай бұрын

@@MikeJack is it necessary to completely strip the gun down like this every so often ???

@MikeJack 6 ай бұрын

No it is not necessary to completely strip the gun down like this, it will fire many thousands of rounds before a part breaks and must be replaced.

@hillelnorry5670 5 жыл бұрын

Thank you for this and the disassembly videos. They gave me the confidence to take my 686 apart.

@MikeJack 5 жыл бұрын

I am glad my video help you.

@ATINKERER 3 жыл бұрын

I wish I had known about using a phillip screw driver to put in the rebound spring like you did. For years getting that spring back in has been hell for me. Thank you for showing me an easy way to do it with a common every day tool!

@MikeJack 3 жыл бұрын

Yes a phillip screw driver do the job easy.

@lamoulegeante2462 Ай бұрын

Awesome video. This helped me fix an issue I had with the DA sear not resetting correctly. Thank you so much. Greetings from France.

@MikeJack Ай бұрын

I'm glad my video is helpful 😎

@voodosforever 7 жыл бұрын

AS GOOD AS YOUR "DISASSEMBLY" VIDEO- AND IT WAS ABSOLUTELY EXCELLENT!!!

@MikeJack 7 жыл бұрын

Thanks.

@WheelgunsOnWheels 3 жыл бұрын

Very good detailed demonstration. I promise you make it look much easier than it is for me to do it. I actually got about 20% finished then had to call in the professional to finish the reassembly. Looks like more practice is necessary. To anyone out there thinking that they can do this on the first try I wish you all the best luck in the world.

@MikeJack 3 жыл бұрын

Thanks a lot, take your time when you disassembly and reassembly a gun, before I make a gun movie i disassembly- reassembly the gun 2-3 times.

@WheelgunsOnWheels 3 жыл бұрын

@@MikeJack thank you sir. I’ll keep trying.

@chaddfry5345 Жыл бұрын

This video is invaluable! I would have never got mine back together on my own. Thank you!

@MikeJack Жыл бұрын

I'm glad my video is helpful.

@eduardoganja6731 2 жыл бұрын

Thanks man, your videos make it so much easier when i want to play with my 686 be it for a detail strip or to stone the insides for smoothing

@MikeJack 2 жыл бұрын

Thanks i'm glad you like my video

@truebiblicalsalvationinanu775 Жыл бұрын

THANK YOU! You saved my life when the trigger spring fell out. Great video.....

@MikeJack Жыл бұрын

Thanks 👍

@boricuaarecibo9259 7 жыл бұрын

that was an awesome video my Smith and Wesson model 629 classic talo edition jammed really bad yesterday at the range with two live rounds in the cylinder. it was jammed so bad i couldn't open the cylinder. I called Smith and Wesson customer service and they told me that I can't send it to them with the live rounds in the cylinder. After watching your disassembly and reassembly video I was able not only to repair my gun but also determine that it was the ammo that jammed the gun thank you so very much

@MikeJack 7 жыл бұрын

you're so welcome, I always use Magtech ammo, they always shoot well.

@danjenkins7815 6 жыл бұрын

Thanks for this video. Mike Jack can you post a video of how to install the hand tension spring? Explain how it is positioned in the trigger and how to position the hand to get the spring installed correctly. A great number of people would greatly appreciate it!!!!

@rustypanels5719 Жыл бұрын

Great videos. Thank you for posting.

@MikeJack Жыл бұрын

👍

@gebeme11 6 жыл бұрын

Fantastic video along with your disassembly video! Helped me out quite a bit.

@MikeJack 6 жыл бұрын

Thanks I'm glad if my videos help you.

@doc8579 Жыл бұрын

Excellent video. We’ll shot at a good speed. Gave a great understanding of how to assemble. Thank you.

@MikeJack Жыл бұрын

I'm glad my video is helpful

@erniegarland7630 6 жыл бұрын

Great video. Helped out a lot.

@PhilSerafinasBeeHappy Жыл бұрын

Thanks for the excellent assembly and reassembly videos. Well done Sir!

@MikeJack Жыл бұрын

👍

@ParkGeoff 8 жыл бұрын

Thank you. This video saved my ass!

@pekolucky 6 ай бұрын

Terrific video! Thank you so much!

@MikeJack 6 ай бұрын

👍

@djgranny8438 7 жыл бұрын

gorgeous revolver and love the satin stainless finish

@richardponce1580 6 ай бұрын

Very, very good job. Thanks.

@MikeJack 6 ай бұрын

👍

@timothywright1318 11 ай бұрын

Great video!

@MikeJack 11 ай бұрын

👍

@barniszelepcsenyi6104 6 жыл бұрын

Very good video. Thank you! Greeting from Hungary!

@MikeJack 6 жыл бұрын

Thanks I'm glad you like my video.

@BaxterBandCreek 2 жыл бұрын

Awesome video well done...

@MikeJack 2 жыл бұрын

Thanks

@farhadjabbri4331 4 ай бұрын

Informative, not having any gun but watched twice.

@MikeJack 4 ай бұрын

Thanks

@lloydorjanet 6 жыл бұрын

Enjoyed your video very much

@MikeJack 6 жыл бұрын

Thanks a lot.

@maxpower6765 Жыл бұрын

The cylinder stop looks a bit tricky to get in and out Great video. Thanks

@MikeJack Жыл бұрын

Do it slowly and it's not tricky.😎

@scottd9448 7 жыл бұрын

Thank you for your video, I was having trouble getting the cover plate back on and found it was the hammer block.

@MikeJack 7 жыл бұрын

I'm glad my video help you to get the cover plate back on.

@michaelvillanueva4390 3 жыл бұрын

Thank you for this video but next time please dont record on the freeway.

@pierangelosossi3188 5 ай бұрын

Fantastico, impossible to be better than this, thanks so much.

@MikeJack 5 ай бұрын

Thanks 👍

@pierangelosossi3188 5 ай бұрын

@@MikeJack I hope for video about Beretta "92×performance " , thanks a lot, the right way to teach, number one.

@MikeJack 5 ай бұрын

Sorry no Beretta in my collection.

@pierangelosossi3188 5 ай бұрын

@@MikeJack no problem, thanks very much for the job you are doing, ciao e so long.

@eddiecabot8886 5 жыл бұрын

Thanks for the help

@MikeJack 5 жыл бұрын

you're welcome

@peteh6445 6 жыл бұрын

THANK YOU!

@MikeJack 6 жыл бұрын

you're welcome

@lens7859 2 жыл бұрын

Very good and detailed video

@MikeJack 2 жыл бұрын

Thanks

@singleactionrevolver4376 6 жыл бұрын

outstanding video

@MikeJack 6 жыл бұрын

Thanks a lot.

@scottgarner7656 4 жыл бұрын

Thank you,thank you,thank you!!!!!!!

@MikeJack 4 жыл бұрын

And thank you :)

@-Rottenapple- 7 жыл бұрын

Thanx!!!

@Rusted_Link 3 жыл бұрын

Thanks bud!

@MikeJack 3 жыл бұрын

you're welcome

@pietrodematteis1256 2 жыл бұрын

Grazie infinite saluti ITALIA

@MikeJack 2 жыл бұрын

👍

@louispegno4064 3 жыл бұрын

Thank you

@MikeJack 3 жыл бұрын

👍

@santipanyasai4717 3 жыл бұрын

thank you.

@MikeJack 3 жыл бұрын

👍

@matthewcaldwell6763 3 жыл бұрын

Finally someone who doesn't over oil

@MikeJack 3 жыл бұрын

Oil collects dirt and a S&W revolver can shoot well without oil

@ferdinand2506 5 жыл бұрын

I wish I could also do a great video like yours, Mate

@MikeJack 5 жыл бұрын

Thanks I'm glad you like my video.

@barmintrout Жыл бұрын

I do like your the video the best of all the ones I watched though>😁

@MikeJack Жыл бұрын

👍

@StrongManMattt 8 жыл бұрын

Awesome, great video!

@MikeJack 8 жыл бұрын

Thanks, I'm glad you like my video

@StrongManMattt 8 жыл бұрын

+Mike Jack Very helpful, I just got a brand new 627-5 S&W I was bummed when I took it to the range and had multiple ammo failures. Apparently S&W is putting shorter firing pins in their guns now but you can order longer ones from an independent company (Cylinder & Slide Inc) and replace them. I was thinking of disabling the internal lock too but I might just wait on that it was a real pain in the butt trying to put that side plate back on for the first time!

@MikeJack 8 жыл бұрын

Congratulations with your new S&W 627 awesome revolver, your mainspring screw must be tight.

@wjbh7442 3 жыл бұрын

Outstanding video. You make it look so easy! I have one question: I'm not an avid revolver guy, but you hear people talking a lot about correct timing when it comes to revolvers. Is that something to be concerned with during disassembly/reassembly or is it more related to parts tolerances and wear?

@MikeJack 3 жыл бұрын

There is no reason to be concerned about correct timing when you reassembly your revolver, revolver mechanics are simple, if the parts is good and you do like I do in this video your revolver will shoot again.

@andyostertag 8 жыл бұрын

Very, very well done and informative video. Thank you for sharing your experience. I will watch these two (disassemble / reassemble) videos as a new 686 owner. Do you use a ultrasonic cleaner?

@MikeJack 8 жыл бұрын

+Andy Ostertag Thanks, I'm glad you like my video, congratulations with your new 686, it is the best revolver.I clean the old way, it's my hobby to clean guns and I use hours to clean 1gun.

@andyostertag 8 жыл бұрын

+Mike Jack Love the Cylinder breakdown as well. Do you know where I can find a break down picture like you use in the opening of your Videos? And do you use an ultrasonic cleaner?

@MikeJack 8 жыл бұрын

+Andy Ostertag Hi you can google smith and wesson revolver diagram, I clean my guns with Brass brush, solvent and cleaning patches. tomorrow I will upload a new interesting revolver video, have a nice weekend.

@andyostertag 8 жыл бұрын

+Mike Jack Thanks for everything. I will be notified of your videos. Have a great weekend.

@mattclark10159 7 жыл бұрын

absolute perfect video,,,best on utube,,,,question is disassembly-reassembly the excact same for the sw 617..?? looks like everything identical.?

@MikeJack 7 жыл бұрын

Hi Matt. Yes almost all Smith & Wesson revolvers is disassembly-reassembly same way, there can be small differences.

@mattclark10159 7 жыл бұрын

Mike Jack thx Mike I think after watching your videos I have mustarded the courage to tackle the new trigger job..

@MikeJack 7 жыл бұрын

good luck

@jayaitcheson325 3 жыл бұрын

Thanks for the informative video. I have a quick question - is there a hole in the frame that the cylinder bolt plunger fits into?

@MikeJack 3 жыл бұрын

Yes

@jayaitcheson325 3 жыл бұрын

@@MikeJack Thank You, I appreciate your help!

@John-xw3lr 6 жыл бұрын

How do you set the spring that articulates the hand? I have a 686 P performance center model and I can't seem to set it correctly.

@MikeJack 6 жыл бұрын

Hi John you can see here kzfaq.info/get/bejne/q9yCn8-jtbnKeKM.html

@HieuLe-nq9yp 3 жыл бұрын

My new SW 686 plus came with the rebound pin/spring, but my new 586 only came with rebound spring. No pin. I am talking about the spring @7:00. For some reasons the trigger return on my 686 is smoother than my 586. Is it because missing the pin?

@MikeJack 3 жыл бұрын

Hi if the trigger return is smoother the rebound spring is lighter, the overtravel stop pin in the spring do nothing and i dont think S&W more use the pin.

@barmintrout Жыл бұрын

You forgot the hand torsion spring installation.

@MikeJack Жыл бұрын

It has its own video kzfaq.info/get/bejne/q9yCn8-jtbnKeKM.html

@FalconLair09 4 жыл бұрын

MJ, is there a reason you put the cylinder in before putting the hammer in, then you take it back out? Necessary or habit? Another great video too

@MikeJack 4 жыл бұрын

Cylinder release get push back and make space for the hammer. : )

@lon242 10 ай бұрын

5:00

@midohioguardian4957 3 жыл бұрын

Is that a pin that goes inside the rebound spring ?????????????????????????

@MikeJack 3 жыл бұрын

Some S&W revolvers have the overtravel stop pin in the spring, not mine and i dont think S&W more use the pin.

@midohioguardian4957 3 жыл бұрын

@@MikeJack Thank you.. I would of bet that pin didn`t go there. There is no way that pin is way to short to hit before the rebound slide does, But I put it back in there.. Thank you sir for your feedback/comment !!

@MikeJack 3 жыл бұрын

👍