I'll show you how I do a basic cleaning & lube on my S&W 686 revolver. There's no one "Perfect" way to do it and everyone has their own technique, but this is how I do it. Complete disassembly video: • How to Clean a Smith a...
Пікірлер: 203
@DeGauss735 жыл бұрын
That Birchwood Casey lead removal cloth recommendation was a great takeaway. Good video. Thanks
@82luft493 жыл бұрын
I just just purchased a S&W 686 plus 4" (my very first revolver!) and your cleaning tutorial is a godsend. I subscribed
@UnstoppableYaris Жыл бұрын
I hope you are not cleaning it from the front, you can damage your barrel. Always from the rear of the barrel forward
@boricuaarecibo925910 ай бұрын
Good luck with your new 686-6 But trust me it won't be your last 😂
@sammcrae88925 ай бұрын
Kinda tough to do on a revolver. Maybe with a boresnake, but with standard kit, not too easy, unless you insert the rod, from the front, screw the brush on, and drag it back out the front. Repeat ad nauseum. @@UnstoppableYaris
@UnstoppableYaris5 ай бұрын
@@sammcrae8892 Agreed! I use the snake on the barrel.
@tpr383Ай бұрын
Great video. Watched others and they never removed the cylinder for a thorough cleaning. Also liked the tip about firing the 357 first before shooting 38 specials. Well done.
@timw20833 жыл бұрын
Excellent video... I will look for the lead remover cloth. I love my 686 3" and plan to grab a 4" next month. I never thought I'd watch a 20 minute cleaning video.. lol.. Thanks again!!!
@notsosilentmajority1 Жыл бұрын
I didn't think I was going to sit through the entire 22 minute video BUT I could have sat through another 20 minutes of your video. Great job cleaning, educating and adding a little humor to this video. I'm just getting back into revolvers after years of playing with polymer pistols that are all beginning to look alike so this was a nice refresher. The Birchwood Casey Cloth looks like something I wish I knew about years ago. I paused the video and ordered it from Amazon and will have it delivered tomorrow. It's been 5 years since you made this video and it still was only $8.99 per package, so I ordered a couple. Great job, I'm looking forward to checking out more of your videos. Liked and subbed.
@notsosilentmajority1 Жыл бұрын
Hey brother, I literally just rewatched this video because I finally used the Birchwood Casey Lead Remover & Polishing Cloth's. Man, those things work just like in your video. I will recommend them to anyone that is looking for something to clean stainless revolvers, they work great without having to work too hard. Thanks again. Stay safe.
@josephdotson793711 ай бұрын
One of the best cleaning tutorials I've ever seen. I've had a 686 for years and always thought I kept it pretty clean. I watched your video and have now added a couple of steps to my cleaning process. Also, great job making the video enjoyable. Like you said, most cleaning videos are boring. This video was not. Great video all the way around.
@danfischbach35493 жыл бұрын
I've watched many revolver cleaning videos on You Tube, and this one is the most helpful.
@Tailsnpaws3 жыл бұрын
Good video with an intelligent approach on cleaning a fine revolver. Thank you.
@Gluckstadt0075 жыл бұрын
I really enjoyed your video. Liked the dry brushing 1st. Great idea. I use Ballastol on my Glocks as well and works just fine. Can't wait to get tha Birchwood Casey cleaning cloth. Thanks for taking the time to make this video.
@tombusa323 жыл бұрын
Ordered a 6"x9" Birchwood Casey lead removal / polishing cloth on Amazon for $4.63 each. Thank you for the video👍
@ammooth1592 Жыл бұрын
I remember using this to clean 🪥 my cylinder back with 1rst .357 Magnum 💯. I will be on the look out for this product 🤝
@jasonholland83925 жыл бұрын
Good stuff. I’m glad you mentioned the Birchwood Casey Cloth 👍
@ginobambino85962 жыл бұрын
Just bought my first S&W 686. I’m your newest subscriber. Thank you for the excellent video.
@tedfritsch3340 Жыл бұрын
What a great video, I went to Birchwood and purchased the cloth, and also the basic screwdriver set. Thanks for what you do.
@seanshah69052 жыл бұрын
Brother your video is excellent! I just learnt how to clean my revolver that I'm waiting for to arrive thru my FFL. So thank u!
@walden62723 жыл бұрын
Gosh, your 686 is so gorgeous.
@ladorose86173 жыл бұрын
Thanks for the tip on the Birchwood Casey lead remover cloth. I just bought one. Buildup on the front of the cylinder was driving me crazy. Great tip!
@traditionalmuzzleloader49832 жыл бұрын
I always use a bore guide on my cleaning rods. Especially when having to clean from the muzzle. Other than that, you did a good job showing how to clean a revolver. Thanks.
@johnpiechule4485 Жыл бұрын
Excellent tutorial, especially about the lubing...thank you very much!
@mikepower4113 Жыл бұрын
Good video. Just ordered that lead remover cloth. Thanks. That is something I needed
@geoffc376 Жыл бұрын
A Very helpful video, and what a Beautiful 686! Thank you!
@steveandrushko7510 ай бұрын
Outstanding video I just bought my first revolver (S&W 686 Plus Deluxe 6" barrel0) This is excellent information thanks!
@abengelbrecht3 жыл бұрын
Thx man great video! That lead remover cloths work excellent and saved me a ton of time and trouble.
@Arthurmd222 жыл бұрын
Loved this video!!! Funny yet informative!
@kbm-zw5jd Жыл бұрын
For the cylinder holes, I chuck a cleaning rod with a .45 cal brush into a low speed drill and while holding the cylinder so it doesn’t spin, run the brush back and forth through each hole for maybe 5 seconds. Follow it up with a solvent soaked patch and they come out black. Follow up with dry patches to mop up remaining solvent. Gets them spotless. Never do this to the barrel since the barrel is rifled, but the smooth cylinder holes get as clean as they day they were made.
@bwasman8409 Жыл бұрын
Thanks for the lead removal cloth tip! Good video!
@Axlepup13 жыл бұрын
That's a beautiful 686 before the cleaning!!
@rodcoulter997 Жыл бұрын
You do really good videos…camera work and narrative are A+…..
@denniscrowley85172 жыл бұрын
Churches and gun stores. Nice. Love the polishing cloths.
@txstevew6 жыл бұрын
Great demonstration on cleaning a revolver. I like those grips. I use the birchwood lead remover too. I can get it at Gibsons in Kerrville.
@TheGoatMumbler6 жыл бұрын
Gibson's? I haven't heard of that store for 40 years! I hear there's a few left around.
@alpowell2 ай бұрын
Worth watching just to find out how to get lead off the front of the cylinder. The 686 is the first stainless handgun I've owned and I really struggled with those deposits first time I cleaned it.
@justintyme27642 жыл бұрын
The video I’ve been looking for! Thanks!
@jalbert2225 жыл бұрын
Great video. I have a 686 and thought I was cleaning it well. But I learned some good tips from you, especially the Birchwood recommendation (just ordered some from Amazon). And, I too was probably over-oiling mine.
@jtdundee2 жыл бұрын
Truly... venerable wisdom!
@kevinh845 Жыл бұрын
Awesome video brother. Appreciate you sharing
@pauld1363 жыл бұрын
Excellent product!
@matthewwhittaker50574 жыл бұрын
Amazing lead removal cloth, great video
@Themeshoots5 ай бұрын
Great instructional video. Thanks! Learned a lot.
@mgtlux68154 жыл бұрын
I just received the birchwood from the Us and this work perfectly! Thanks
@fredreeves76523 жыл бұрын
Excellent video! Thank you!
@larkinoo4 жыл бұрын
I like to shoot a little Rem oil down into the lock works........just because. Been doing that the same way for 40 plus years. I do it because I like the idea of the inner workings being lubricated. My revolvers don't have any grease or " gook " oozing out either because............Rem oil, and most gun oils evaporate fairly rapidly. So it is just how I make love to my precious firearms. PS I always, always am very careful to not let any oil under my handgun grips. Nor under a barreled action on rifles. Love, Doug.
@lastcoyote2355 Жыл бұрын
Good video . A couple of things I’d mention . 1: wrap the wood grips with cling wrap or a tight plastic ziplock bag . Solvent is very degrading to wood and wood stain/ finish . 2: I always wear protective gloves thin rubber ones work great . Solvents are bad juju to skin . 👍👍
@jrozz4219 ай бұрын
Balistol is great for wood and the skin
@bigjerrym94784 жыл бұрын
Thank you very much was a great video very helpful
@mrdave21125 жыл бұрын
I like it when the church is next to the gun store: after service just walk next door. Also, our church encourages open carry during service. Them lead removal cloths are awesome; been using them for years. Thanks for the video.
@GeraltORivia4 жыл бұрын
Gorgeous gun.
@NigelRodger-mw8lb4 жыл бұрын
Excellent! I'm probably an over oiler! Even though I know better!! I will be more aware from now on. Thanks
@NAVINPERSAUD4 жыл бұрын
Great video thanks for ur help just got my first revolver used s&w model 60. Trying to clean gotta get all the supplies
@briancaine9130 Жыл бұрын
Great video. Very helpful.
@dwheeler0165 ай бұрын
In the past, I scrubbed for hours (or it felt like hours) with a brass brush removing the lead and powder from the face of the cylinder.
@bigriver32782 жыл бұрын
Nice advice straight out of the blocks about using proper screwdrivers and methods when disassembling gun screws....it's almost inevitable to scratch/mar your beauty if not heeded!
@TyroneLylesJr-vm5ot Жыл бұрын
Very helpful, good i came across this, thanks
@b.neallee7042 Жыл бұрын
Careful when using steel headed brush. Doesn't do much but scratches are a COMING. Beautiful gun. I clean after break down and oil everytime. Marines always know to clean and oil their life blood. Great info. Neal
@GWoods-rc5xw4 жыл бұрын
Great vid Have a new 686 Awesome gun. Carry it on my hip. Revolvers are the best. IMO. 🤠
@robbrown40535 ай бұрын
Excellent video. I like your style. Birchwood Casey lead removal cloth a great tip.
@timrossiter5065 Жыл бұрын
Awesome presentation Thank you
@alainmorin3 жыл бұрын
I learned a lot -- thanks!
@thejasonbischoff5 жыл бұрын
Used to live across the street from a gun store in Bloomington, IN. Have not been as fortunate here in Austin.
@nickmiller92624 ай бұрын
I couldn't afford the 686 so I went with a Ruger GP100. I wasn't let down
@breadmandave5 жыл бұрын
Well done. Thank you :)
@hikingbears68074 жыл бұрын
Great song!!! 👆🏾🙌🏾
@ritesideofthefence5857 Жыл бұрын
Good stuff, thanks for sharing.
@timsherman87012 жыл бұрын
Great video. Thank you
@m.loughlin19153 жыл бұрын
My co-favorite (along with the Ruger GP-100) handgun of all time. Don't care for the 7-shooter. Mine a sixer. Got a dozen or so speedloaders. Very seldom ever remove side plate. A good spritz of Birchwood Casey Gun Scrubber, let it dry, then a good spritz of Break-Free and I'm done. Got an old Lewis lead remover for the bore. Good video, but you need the aforementioned items. Also, I'm a strange guy about guns. I loathe and detest almost ALL centerfire semiautomatic firearms. Don't like single action revolvers much either. However, when it comes to RIMFIRES, love semiautomatic. Got a Smith Model 41 target 22 pistol and an old Hi-Standard Victor. Cheers everybody!
@MPGunther15 жыл бұрын
nice job on the video
@harveygussow79134 жыл бұрын
Thanks for the use of stainless steel removal of lead and copper.
@rafacorona92274 жыл бұрын
Great video, thank you for sharing.
@xtkzrider Жыл бұрын
nicely done. thank you sir.
@BigIronBickle2 жыл бұрын
Nice grips on that bad boy!
@tedjohansen77304 жыл бұрын
I use Blue Magic metal polish for cleaning the cylinder face. Easier and faster than the Birchwood Casey cloth.
@davidash2727 Жыл бұрын
Birchwood Lead Remover cloth, perfect, thanks!
@Jv_reality4 жыл бұрын
Thank you so much. Awesome.
@b.neallee7042 Жыл бұрын
I inherited a 357 mag S&W Mountain lite 7 round wheel gun . It's a 1988 in perfect shape, shot less then 20 times. Comes with medal locking case. IT ONLY WEIGHS 18 OUNCES, THAT'S RIGHT 18 OUNCES. 3.5 INCH BARREL. THEY STOPPED MAKING THEM BECAUSE IT'S VERY EXPENSIVE TO MAKE AND HARD TO WORK WITH. 7 ROUNDS ON TARGET GIVES YOU PEACE OF MIND. NEAL APOLLO BEACH FLORIDA
@ron8566 Жыл бұрын
Very nice. Thank you.
@Chopins11th2 жыл бұрын
Regarding the author's advice to acquire the awesome (my favorite too) Birchwood Casey Lead & Polishing Cloth, I AM in the Phoenix area but both Cabelas and Bass Pro locations here have always stocked these Cloths in the gun kit cleaning sections. Because of Cabelas and Bass Pro being national chains I'd at least look for them there if you frequent either place as they are only Seven bucks and change and last a long time. I've take a black penny and turned it brighter than mint with two fingers inside about 90 seconds with minimal force and lead is NO Match for these cloths. No elbow grease required.
@wilstandridge73884 жыл бұрын
Love K9s Treat em good, they'll treat you better
@J.R.F.23 Жыл бұрын
Good video. I prefer the KleenBore Lead Away Gun Cloth over the BIRCHWOOD CASEY brand. Both work; yet the KleenBore brand is thicker and works a little better. Additionally making smaller patches with the lead remover cloth; works nicely inside the cylinder and barrel.
@markmaslinski47713 жыл бұрын
Very helpful
@doug59595 жыл бұрын
you have to have the right size butter knife
@Eddy-gc2vx4 жыл бұрын
I would use a swab saturated in clp first and run it thru the barrel first to loosen up the residue. Then use the brush to remove the lead, etc. Then patches until they come OUT clean. Same with cylinder. BWC lead remover is great. I use shooters choice to clean my guns, but doesnt smell like hops.
@MimeswithRhymes3 жыл бұрын
A short, thick strip of leather and pair of vice grips is how I take the cylinder apart. Clamp the leather onto the knurled section of the ejector rod with the vice grips and rotate counter clockwise to loosen it. Notice a small area inside the rod is hollow, so try not to crush it with too much clamp force. It’s not a necessary step after every shooting, but hey, those little parts inside get dirty too! 😉
@dalegribble15604 жыл бұрын
I learned it's best to wipe excess carbon off the cylinder/finish relatively quickly. I waited a good day to clean it and it was a mother#$%^$#@ pain to clean it off. I'll own to the fact that I was horrible to a Smith & Wesson revolver. To anyone who buys one, wipe off the cylinder when you're done shooting! You don't have to CLEAN IT clean it but a goood wipe will save you lots of elbow grease when you do clean it!
@tomfile31313 жыл бұрын
Q: Do you HAVE to use left-handed metric cleaning tools ? Those are really expensive ! LOL By the way, may I suggest using nitrile gloves ? I like to prevent oils and solvents from getting into my body. Just a thought...
@paulnelson72734 жыл бұрын
Beautiful gun, noice
@PureBreadFloof2 жыл бұрын
Some good ole unintentional ASMR
@ATS3573 жыл бұрын
The Birchwood Casey lead remover also works on the forcing cone. I use it all the time.
@ragnarlothbrok91332 жыл бұрын
True. I put a long patch of it under the cone and work it like I’m shining shoes.
@ms.anderson70642 жыл бұрын
Thank you.
@danieldismuke96752 жыл бұрын
I love your grips, what are those? Absolutely beautiful and great informational video. Definitely helped me with my 686
@carlosprieto7734 жыл бұрын
Thanks for the video and thank you for the tips! Are those Altamont Grips? They look great!
@verlingunnels98142 жыл бұрын
Ordered the birch wood 😉👍
@user-hj2vy4sk8j4 жыл бұрын
so badass
@JeffPR16 Жыл бұрын
useful! thanks
@richvest7212 Жыл бұрын
Yes, ballistol the best 👌
@leotheman20033 жыл бұрын
just ordered 2 bags of the birchwood casey cloth from amazon.
@Sepheriel4 жыл бұрын
@TheGoatMumbler, do you have a complete list of all the tools in this video so that I can get them myself? Thanks.
@danieldismuke96753 жыл бұрын
Crazy! You have the grips for my 686 I’ve been looking for. It’s the Smith and Wesson Deluxe grips but theirs do not have the finger grooves. Yours does, I’ve never seen those before but that’s what I’ve been looking for. Did those come stock? Or did you get them aftermarket and if so where? Please. Oh, I dig the video too. Good and informative
@stuartmarkman769Ай бұрын
I see you have an original 6 round 686. I have the exact same gun and it is way smoother than the newer 686+. It is a gun you keep forever.
@jackfo57963 жыл бұрын
Very helpful. Thanks. Where did you get the blue towels?
@calebkiller975 жыл бұрын
great great video, is there any reason not to use those lead cleaning wipes you said to order off the internet on more than just that face of the cylinder? like would cleaning the chambers or barrel with those be a bad idea, or just unnecessary? God bless
@Durka-Durka3 жыл бұрын
I'm no expert but I'd say - why not? It does such a great job removing all that lead so thoroughly and gently I think it'd work great on those areas.
@matthewwillett7090 Жыл бұрын
A lot of good tips, thank you! Just one question though... I thought when pushing a wire brush through a bore (and in this case the cylinder) you need to push it all the way through before retracting it. That way it doesnt damage the bristles or the bore. Myth?
@rightsaidgreg3 жыл бұрын
What kind of grip do you have. I Love the way it looks.