Thank you for these milling tips. I have been hoping you would do more video's using the Smithy 1220 LTD. I purchased this unit about a year ago and have made your carriage stop set up and I'm currently installing the DRO's as you have done. As you have mentioned this combo unit does have its short comings as I have found out. I appreciate you doing these videos and hope you continue doing them. I'm not a machinist so I need all the help I can get. Thanks again. Dennis
@stevelamperta8654 жыл бұрын
I have the grizzly g9729 lathe /mill combo which is almost identical to your machine , in fact the mill heads are exact ! I have the same problem with end play in the quill but all you have to do is use the quill lock just enough so you can still move the spindle down into your work and it will take all the play right out of it ! The set screw is only there so the quill wont turn , use the quill lock , just snug it so you can still move the quill down .
@armedtotheteeth19742 жыл бұрын
I have the same exact machine. Your digital readouts are great. Where u live. Im gonna come steal them. 😁. Seriously though. Those are nice. My machine is 15 years old and run hard and put up dirty. Yours is nice and clean.
@paulrodrigues5562 Жыл бұрын
I had to rebore my mill head and chrome plate the spindle quill to fit snug. Also replaced original bearings with needle bearings. Much better if you don't overload it.
@mimlomiani69497 жыл бұрын
I wish you had added an address to where you have the DRO's From. I just can not find anything like yours on Ebay.... Thank you for sharing anyway..:)
@primusinterpares48115 жыл бұрын
Hello, what brand and size of milling vise was used on Smithy MIDAS 1220 in the video? Thank you in advance.
@Gunslinger12982 жыл бұрын
I was wondering Sir where you got your extension for the mill head. I looked on smithy's website but didn't see anything. I appreciate any info you can offer. Thanks!
@TaeKwonJoe983 жыл бұрын
Mike, where did you buy your DRO for your smithy?
@highonbusa65203 жыл бұрын
What kind of DRO are you using on your smithy?
@mattgwinn61963 жыл бұрын
What size vise is that in the video a 4” or a 5” or other?
@Yukam19124 жыл бұрын
man thts an expensive machine vice did she came with machine or u bought separate?
@Farmall450 Жыл бұрын
What DRO is that?
@Mac-mu9cs Жыл бұрын
I have a 90s vintage 1220 XL I can not for the life of me get the taper cut out of the lathe. I feel like the gear head is out of whack on the bed.
@jonathanlarsen43978 жыл бұрын
What DROs are you using?
@NotSStock6 жыл бұрын
I hate videos like this. Yeah I used these parts and they were FUCKING GREAT! But I'm not going to say what part #, where I got them, or anything else. You're on you own fuckers!
@markoc.23973 жыл бұрын
Hello, name is Mark. If This is still available I could be interested. Maybe I'm not looking in the right place but don't see listing price $. please send all the info if your still wanting to sell. Thanks Mark
@tbirdpimp076 жыл бұрын
Why dont you make a die and just press the plates out
@arya82096 жыл бұрын
Nice.
@luispachon31436 жыл бұрын
I have solución to this problem.
@jumapali7 жыл бұрын
The price Smithy 1220 LTD, grate washington, Brazil.
@SDCustoms7 жыл бұрын
Why do these small mills have quills like a drill press? Why can't they be tight like the big mills... my enco has zero slop in its quill.
@user-ks5ff5 жыл бұрын
Most small mills don't, most small mills don't even have a quill so they're completely rigid.
@davecox9003 жыл бұрын
Can knock them out a cheap cnc mill in big numbers