Making Lathe MILLING Attachment

Рет қаралды 5,009,259

4 жыл бұрын

Is milling on a lathe possible?
I decided to convince myself and convert my lathe into a milling machine.
Installation of the attachment does not take more than a few minutes, so quite short. I can mill keyways, make longitudinal holes, or mill small areas.
I think that for a hobbyist it can be a good solution, but if you want to mill frequently, buying a milling machine will be a better option.
The vibration turned out to be a problem in my lathe. If I had a lathe that weighed a ton or more, it wouldn't be noticeable.
In general, I think the experiment was successful and I will use this attachment from time to time.
--------------------------------------------------------------------------
Some tools I use in my constructions:
Self made:
Belt grinder 2x48 - • DIY Belt Grinder 2x48"...
Vise - • Super Strong Hydraulic...
Drill press STAND with COOLANT SYSTEM - • Drill press STAND with...
and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Band saw Stiler BS 712R
Drill press ZX7016
--------------------------------------------------------------------------
Videos that you may like:
• How to make KEYWAY on ... - KEYWAY on the LATHE
• Chain Saw HACK 8 - 3H... - Chain Saw HACK 8 - 3HP Brushcutter
• Chain Saw HACK 7 - Dri... - Chain Saw HACK 7 - Drill Attachment
• Chain Saw HACK 6 - Ear... - Chain Saw HACK 6 - Earth Auger
• Wood chipper & Log spl... - Wood chipper & Log splitter - BUILD
• Making electric Roller... - Making electric Roller Bender Part 1/3
--------------------------------------------------------------------------
Social media:
FB: Made in Poland
Insta: made_inpoland
--------------------------------------------------------------------------
Music by KZfaq library :
Canada
Fleas
Just Us League
Mexico
Princess
Wonton
--------------------------------------------------------------------------
DIY
Homemade
How to make

Пікірлер: 916

@Mikefestiva 4 жыл бұрын

Like always top quality build! Thanks for posting, this definitely could help someone out that only has a lathe and needs a way to mill stuff, the fact you make most of the part on the lathe it great! Thanks for posting 🙂

@regsparkes6507 4 жыл бұрын

This is a very timely video. My brother and I were just talking about wishing we had a small milling machine. He does have a lathe. Now it's possible to have both, with this adapter head attachment. Thanks you for the clear instructions.

@bheckel1 3 жыл бұрын

Somebody get this man a milling machine and microphone. Amazing video. Ingenious work. Thank you I really enjoyed it.

@jnhook8086 2 жыл бұрын

All of your diy jigs / tools are always so well engineered. I've been watching you since you were making your own drill powered lathes in a small garage and I thought, wait till this guy builds up his tools / shop and he'll be the #1 diy jigs /tool guy on KZfaq. Keep it up brother, we need your ingenuity. God bless

@buczo102 4 жыл бұрын

Wyszło świetnie! Choć sam pracuję w drewnie, to uwielbiam oglądać jak Ty pracujesz w metalu! Szacun! :)

@scottfeeney8198 4 жыл бұрын

Interesting execution of the desired result. I think your comments say it all. When it comes to engineering, which bench tool work is, then one needs to get the fit-for-purpose tool. But as always, your ingenuity and ability make it compulsory viewing. Thanks.

@markhedquist9597 2 жыл бұрын

And there you go! Now you have a mill! This is the second time I've watched this video. Worth watching again. Nice build, man!

@DeanoD13 Жыл бұрын

EXCELLENT INFORMATION FOR THOSE OF US WHO CAN IMPROVISE AND CONCUR MOST ANYTHING. YOU ARE A VAULT OF KNOWLEDGE, WE THANK YOU.!!

@davidrodriguesmaia5383 4 жыл бұрын

Amazing skills. Impressive!

@IW4DBX 4 жыл бұрын

I always love to see your works, it's very rare to see something done without possibility to improve it, because it is perfect born.

@MangalSingh-st1vq 2 жыл бұрын

I always love to see your works it's very to see something done without possiblbility to improve It because it is perfect born

@fireforcecreative 2 жыл бұрын

Brilliant! You have given hope to so many people who can't afford a milling machine, but could emulate what you have worked out and achieved! thank you!

@seanmostert4213 2 жыл бұрын

Wow! The world needs more people like you. Well done mate!

@hoernst2762 4 жыл бұрын

Wiedereinmal ein kleines Meisterwerk aus Polen! Glückwunsch

@dominicbianco3826 4 жыл бұрын

I cant believe how clean his lathe is! Great job

@user-ft4zk1jc1n 2 жыл бұрын

Существует вид станка демонстрационный и рабочий, но рабочий не означает грязный...

@geoffreynewton5839 2 жыл бұрын

His bandsaw is a different matter

@t.s.racing 3 жыл бұрын

Thank you Sir from 🇺🇸. I always look forward to learning from your videos. Thank you.

@janusszakazu9318 4 жыл бұрын

Tokarka przystosowana do pracy jako frezarka pozioma. Tego jeszcze nie grali. Szacun. Polak potrafi !!! 👍👌

@Kyokunek 3 жыл бұрын

Dawno dawno temu..:) firma z Anglii która zowie się Myford wprowadziła milling attachments do swoich tokarek ml7 i super 7. Do dzisiaj są na wyspach powszechnie używane. A tutaj nasz rodak radzi sobie sam🙂 tak przy okazji to super kanał..pozdrawiam!

@carlomonsen 4 жыл бұрын

Amazing! Keep up the good work!

@Mroozik94 4 жыл бұрын

Nawet nie wpadłbym na to, że da się na konwencji frezować. Wielki szacun dla Ciebie!

@pratikalure4306 3 жыл бұрын

Partik

@alonfreaman587 4 жыл бұрын

Your all works are fantastic. You are 10 stars !!!

@josea.rivera4335 4 жыл бұрын

You're tha man!! Incredible ingenuity and skill !! Give you a 10!!

4 жыл бұрын

AWESOME !

@olronholleran1310 4 жыл бұрын

Exelent project, a handy tool to have in a small shop that could handle one of those trickie little milling jobs without a Bpt like mine. Good job

@lds8401 4 жыл бұрын

Dude you are so young and yet so skillful. Congrats and thanks for the video.

@cHudYPnO 4 жыл бұрын

Niesamowicie się Ciebie ogląda, pomysłów masz bez liku. Pozdrawiam!

@solomonflavius24 3 жыл бұрын

You have amazing skills and imaginations

@andreusdelporto1984 4 жыл бұрын

Grande, sei sempre il numero uno per inventiva e precisione nel modo di lavorare!! Grande

@MCsCreations 4 жыл бұрын

Beautiful work, dude! Really well done!!! 👏👏👏👏👏😃

@upward_onward 3 жыл бұрын

If only I was at your home town,I would have given my a month labour hours for free to help you in any way its possible. Thank you is an umder statement for helping humanity.

@badgermcbadger1968 2 ай бұрын

Same

@marciojacomini774 4 жыл бұрын

Parabéns pelo maravilhoso trabalho ,vossas explicações foram de grande sabedoria, sou de contagem mg Brasil .

@masoodkhan6012 4 жыл бұрын

This is the best video i saw on KZfaq 👍

@ae.philipe 4 жыл бұрын

Incredible! Thank you very much!

@odarn8911 2 жыл бұрын

Absolutely brilliant! One of my next projects for sure!

@iamnickyj 4 жыл бұрын

Great video! I love the quality of your work and your ingenuity.

@fernandonautica9161 4 жыл бұрын

Perfeito, parabéns!

@dziggy3004 2 жыл бұрын

Thanks... digging in to start a similar lathe-milling conversion project... All the recent noise that I'm reading about vibration/chatter with similar solutions is bursting my bubble! I'll be trying to eliminate as many sources as possible in the process. DUNNO! Time will tell!

@JEPhotodesign 2 жыл бұрын

1:33 Working the Chuck with a Power Drill...such a great Idea!!! Thanks for the good video...keep on turning...

@user-ik1yy5jb2w 4 жыл бұрын

Молодец мужик, идея хорошая, поддерживаю тебя. Привет вам большой из Смоленска и Смоленской области )

@user-mg4kf9lp5d 4 жыл бұрын

Я сам такое проходил. Эта полумера! Даже самый простенький фрезер будет в разы лутьше.

@user-yc7qm1tu9q 4 жыл бұрын

Привет Смоленск и Смоленская область!

@pawelaco 4 жыл бұрын

Super, dobra robota jak zawsze. Pozdrawiam

@ZloyBober77 4 жыл бұрын

Приятно смотреть когда человек работает руками, а не языком! Привет из Сибири!

@1tonygunalan 4 жыл бұрын

I enjoyed watching your hard work videos which carries subtitles. I wish other would add subtitles. You the world waited for. Thanks.

@aaronwood3540 4 жыл бұрын

I think you can mill on a lathe plenty good enough to do the things you do. Sure help you out making slots and key ways. Dam sure better than the way you've been having to do it. Nice job!!

@MechanicalRhino 4 жыл бұрын

Very well implemented, Good Job👍👍 Steel tends to vibrate easily, so machine beds are made of cast iron to absorb the vibrations. You could fill the connecting tube with sand that might catch some Vinbration. Or you try to make the construction a bit stiffer with some extra steel.

@ignilc 4 жыл бұрын

A better solution would be to fill it with concrete. I did that for my drill press and it works much better

@mughalikram7051 4 жыл бұрын

👋👋👋👍👍

@elisoncorreadasilva4937 2 жыл бұрын

Sensacional, um show! Há tempos que eu venho tentando projetar um dispositivo desse tipo, vou copiar do seu, Obrigado por compartilhar suas experiências e sabedorias, você é um grande profissional, um grande professor, parabéns!!!

@bostedtap8399 4 жыл бұрын

Excellent modification, and very well done. I think the vibration maybe from the carriage slide gib clearence. Thanks for sharing.

@larryschweitzer4904 4 жыл бұрын

Nicely done. It allows some milling at angles that would be difficult any other way. The vibration is from the overhang, just inherent in using the carriage that way. If you could get the center of cutting forces closer to the center of the cross slide it would (probably) reduce the vibrations.

@schmidwalter9191 3 ай бұрын

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@agoogleaccount2861 4 жыл бұрын

every lathe owner should have one of these and a toolpost grinder . that's another great and super useful homebuilder machinist project

@wk160551 4 жыл бұрын

Piękna sprawa. Filmik już oglądam trzeci raz spróbuję skopiować u siebie . Wszystkiego dobrego w Nowym Roku.

@user-cm8vt5nw7f 10 ай бұрын

شكرا ياصديقي انا من اليمن ومهتم جدا بالتصاميم الهندسية، هذه المخرطة حتي يومنا هذا، ليس لها حدود ،مجالها واسع جدا وهي ساحة كبيرة للاذكياء فقط، اعجبتني فكرتك في بساطتها رغم انني بالامس شاهدت فيديو مماثل لمحترف ياباني swap lamp لكن طريقته كانت معقدة ودقيقة بنفس الوقت وتحتاج الي معدات اخري لكن طريقتك مبسطة، تهانينا ياصديقي عمل موفق🎉❤

@amacf1 4 жыл бұрын

Excellent project. To produce such a video takes skill and time. The clarity of the video and process is excellent. Two observations if I may for viewers watching this video to learn machining operations. 1. Only use a three jaw chuck to hold machined concentric surfaces only! Holding un-machined surfaces ruins the accuracy of the 3 jaw chucks scroll or the back of the jaws scroll. If you have two 3 jaw chucks then paint one a colour for general holding. 2. Welding on a precision machine is not recommended as you can introduce arcing within the precision ball/roller bearings. Having said that you did the right thing in protecting the lathe and had the earth clamp right next to where you are striking the arc. This in no way a criticism as I admire you ingenuity and flair to get the job done. That's why I enjoy your videos. Cheers from down under Amf1

@davidrichards5594 4 жыл бұрын

Just found your channel, instantly subscribed. Great work, you could even mount a small rotary table on it to do the curved slots in the one you make for me......Dave

@Amoreyra1 4 жыл бұрын

Excelente! Saludos desde la Ciudad de México

@lukaszmatejko9296 4 жыл бұрын

I tu mnie zaskoczyles !!! więcej takich jak ty a wtedy to z zachodniej granicy będą na nas pracować przyjeżdżali pozdro

@thomasdoherty6876 4 жыл бұрын

Just need some ballasts to counteract the vibrations, great build as always 👍

@Korsh_Un 4 жыл бұрын

Ай красава! Хорош:) Мужики, привет с Поволжья!

@Andreika-63 4 жыл бұрын

Привет с Самарской области!

@tickingWATCH 4 жыл бұрын

Niezła robota. Do mojej chyba zrobię coś podobnego. Dzięki za praktyczny filmik 👍

@robertdaly9036 4 жыл бұрын

Top quality workmanship. 👍👍

4 жыл бұрын

Another great one 👍👏 Now, time for a live tool attachment! 😜 Would have been very helpful to cut the arc slots in the round plate.

@DineshPatel-cx2vi 4 жыл бұрын

Ha 😂😛

@metricstormtrooper 4 жыл бұрын

You're a smart man indeed Mr Made.

4 жыл бұрын

Excelente trabalho e projeto!Obrigado por compartilhar!Minhas saudações do Brasil!

@albertodiaz4783 4 жыл бұрын

Excelente herramienta, gracias por compartir.

@tectalabyss 4 жыл бұрын

Really like the design. I Liked,Shared,Added to playlists. All my best.

@MadeinPolandChannel 4 жыл бұрын

Thank you very much!

@patricknovakdepaula889 4 жыл бұрын

Muito bom parabéns pelo trabalho.

@angelalcaraz8464 4 жыл бұрын

Una idea buenísima. Para copiar. Gracias por compartir. Saludos desde Chaco, Argentina

@rogero9633 4 жыл бұрын

This appears to be a well made attachment for your lathe. It seems to be satisfactory for the need you have at the time. I agree that a full milling machine would be nice, but it I more expensive. Well done and thank you for your video. From Salem, Oregon USA

@Cpl.Cadaver 4 жыл бұрын

Damn fine work there son.

@alexanderlytkinson 4 жыл бұрын

Perfect. As usually.

@youcefassou1592 3 жыл бұрын

Well done thank you for sharing your experience and brilliant ideas

@cosimosanfilippo9050 Ай бұрын

This is a great video, and the work well done, more important in this video, you answering the big question mark for people like me, a very beginner on this field, understanding the unavoidable vibrations due to the complexity of the moving table, again limited on the vertical stroke, and the all design not practical for minute "V" slots etc... Thank you for this.

@pazur199 4 жыл бұрын

Genialne jak z tokarki zrobić frezarkę. Dwie maszyny w jednej, takie rzeczy tylko w Polsce.

@MadeInGarage 4 жыл бұрын

Hi, good job! I have to make a similar design.

@MsSebastianRuiz 4 жыл бұрын

OMG! awesome attachment! thanks for share!

@totallynotabot151 3 жыл бұрын

Nice job! I did a similar thing conversion with a mini lathe and the two issues are rigidity and the general inconvenience of mounting work sideways instead of horizontally.

@user-gx3vo3pd4x 4 жыл бұрын

Вставлять кулачки с помощью шуруповерта-это бомба. Желаю удачи.

@man_craft5947 4 жыл бұрын

Объясните, этого делать нельзя? Я не токарь.

@user-gx3vo3pd4x 4 жыл бұрын

@@man_craft5947 делать можно. Просто неожиданно. Бывает лень долго крутить , а здесь шуруповертом. Круто. Желаю удачи.

@user-ok2gy3re2v 4 жыл бұрын

Гений! Респект! 👏👏👏👏

@ilsoncsantos 4 жыл бұрын

.Congratulations for the video, for the work and especially thank you for the idea. It was really good. Now the last milled ... The machined surface has been practically polished. It was a great show. Congratulations

@mountainviews5025 4 жыл бұрын

BOOM wow I've seen people doing this well the same idea and it worked well very well but your making art as well looks and works extremely well so Proud of you Son thumbs up my friend wow

@TB110602 4 жыл бұрын

One simple word - - - - - - Genius

@glennmoreland6457 4 жыл бұрын

""is milling on a lathe possible"...? You can do owt on a lathe with the right tooling and attachments...🇬🇧👍

@clist9406 4 жыл бұрын

Machines do not know the difference as long as the tooling and supports hold and enough motor you can do whatever you want. Just watch your fingers, keep them clear. In a full-face helmet doesn't hurt either

@theonlybuzz1969 4 жыл бұрын

Yes it’s possible, I have done key way slots in shaft this way, after all the lathe is like a milling machine on it’s back .

@FastSloW-qt8xf 4 жыл бұрын

Yes you can mill on a lathe... however its awful...

@Blahblahthe2nd 4 жыл бұрын

The Mother of all machines!

@paultomat7125 4 жыл бұрын

Yes, you can mill in a lathe. The tool goes in the chuck. The work is mounted, where the toolpost is.

@abuelitojuke8595 2 жыл бұрын

Muy buena idea y muy bien realizado , muchas gracias por compartir , un saludo Maestro ! ! ! .

@danieldsch 4 жыл бұрын

Muy bueno....no solo hay que tener las herramientas...si no también la capacidad para hacer estos trabajos. Felicitaciones.

@JNP-2 Жыл бұрын

I think that if you shortened the stud coming out of the y axis housing and only used one plate to secure the vise it would be a lot more balanced, which may reduce vibration. Another issue is that the whole weight of the assembly is held in place by the two bolts designed to hold just the top slide. Making a stronger mounting system would also help, likely a lot more than just lightening the front end.

@_zzpza 4 жыл бұрын

It looked like a little deflection due to your feed pressure when you cut the keyway. I guess there's some free play in your carriage, most likely because it's having to take forces in a new direction. Very impressive build overall, but I understand your reluctance to recommend it as a milling solution. Beautiful craftsmanship though!

@johnstonewall917 2 жыл бұрын

Great video. Unlike many similar videos the interest was maintained to the very end. I hope you have many successful projects using this jig.

@davidlammas3629 3 жыл бұрын

So good,,, I will be making the same and I can't see any way of improving what you have, thank you for the inspiration 🙏

@kzik1943 4 жыл бұрын

god idea! nice!

@WorkshopFromScratch 4 жыл бұрын

Good job 👍👍👍

@lapphan8926 Жыл бұрын

You right very good worker

@91woocash 4 жыл бұрын

Jesteś GENIUSZEM! stary , tak trzymaj , pozdro

@pattwidale4045 7 ай бұрын

Great job. Great skills. Great machines.

@grigory9372 4 жыл бұрын

Красавчик!!!! Привет с кубани

@user-ft4zk1jc1n 4 жыл бұрын

Давно уже сделал такой перпендикулярный стол для фрезеровки для 1К62.

@cristobalfernandez7903 4 жыл бұрын

Amigo Exelente idea gracias por compartir

@user-ze7io4jt9d 3 жыл бұрын

Красава, отличное приспособление, превратившее станок в токарно-фрезерный, успехов в начинании новых идей.

@RT_BK 4 жыл бұрын

I pięknie i solidnie wykonane, a i zaoszczędzony któryś tysiak na frezarkę. Powiem Ci że inspirujesz mnie swoimi filmikami by iść w podobny temat Pozdrawiam