Snap-on BJP1 Ball Joint Press Master Kit

Snap-on BJP1 Ball Joint Press Master Kit | Snap-on Tools

Рет қаралды 82,435

7 жыл бұрын

With the Snap-on BJP1 ball joint press master kit, you'll cover more applications with fewer adapters than any other set. When it comes to replacing ball joints, you would need an entire tool box to do what this one tool can do.
WATCH MORE: • Snap-on One-Handed Mul...
SUBSCRIBE: goo.gl/vDpPcx
CONNECT
Twitter:
/ snapon_tools
Facebook:
/ snapontools
LEARN MORE
www.snapon.com/
Snap-on Tools is a subsidiary of Snap-on Incorporated, a global leader in hand and power tools, tool storage (including the EPIQ, Masters, Classic and Heritage series tool boxes) shop equipment, diagnostics (including the ETHOS®, MODIS ™, SOLUS™, and VERUS® families of scanners), repair information and systems solutions for professional users. Subscribers to the Snap-on Tools channel get access to the latest product demo videos and diagnostics tech tips and training solutions, as well as videos highlighting the company’s work within the professional racing industry.

Пікірлер: 48

@firstnamelast5246 6 жыл бұрын

I've totally destroyed two of the OTC sets over the years. Time for an upgrade. I like the fact that the Snap-on kit snaps together so the parts don't fall all over the damn floor.

@fuckjewtube69 4 жыл бұрын

This thing is unbelievable. Had a 30 year old Mercedes that I did lower balljoints on and I had a 1400 lb ft gun on this press pounding it for a minute straight, at 1400 f'ing lb ft. It didn't even knick the finish on the adapters. We couldn't believe it at the shop. Wish Snap on made all their tools like this. For $700 Canadian it's a steal. It feels like it's worth $1500. And obviously, you don't need 5 hands to use it like other ball joint presses.

@overthehedge0155 7 жыл бұрын

You get what you pay for. Bought one last year and haven't regretted it. Have had all the competitors kits and this is bye far the most superior in all aspects.

@Nick-oy5fn 7 жыл бұрын

Hands down the strongest C frame out there. This thing is a beast when used properly.

@Soul_Visuals_Photography 7 жыл бұрын

Greatest kit ever. Have had this for about two years and it's amazing. Yes I have all the add ons too

@rodx5571 5 жыл бұрын

BASTARD! (not an attack, just sheer jealousy). 20 years in trade without one.

@marcowens3522 2 жыл бұрын

👍

@pelotas56 6 жыл бұрын

Best tool ever, lifetime warranty if does ever break. expensive but well worth the pennies. Also works great on installing control arm bushings.

@bulldogblvd 6 жыл бұрын

Had mine for years, best kit ever. Need adapters for removing and installing wheel studs on big trucks.

@jeffclark7425 7 жыл бұрын

I had one of these and I love it paid $600 is worth every penny if you're a professional mechanic

@Johkah 7 жыл бұрын

What is a ball joint and why do you need this tool? I'm slowly learning more about car parts lol I PLAN on being some type of mechanic one day so i need to know lots

@bradenriley9066 5 жыл бұрын

I just bought this kit of the truck last week to upgrade from an Astro kit. I should have bought this kit years ago! This tool is a major time saver and a headache reducer. I was so sick of dropping adapters all over the floor! Money well spent.

@Trex76us 7 жыл бұрын

Its one of the best tools in my tool box. Well worth the money if you do this for a living!

@ebaysnipa 6 жыл бұрын

what material is the clamp made of ?

@NoahKuzel 3 жыл бұрын

Two questions, Is it a master kit or is it a starter kit? Is it a tool that Snap On manufactures or is it a rebranded OTC?

@mauriciosaulgomezgonzalez7633 7 жыл бұрын

Ojala me regalaran uno para trabajar y calificarlo y recomendarlo con todos mis colegas

@BerettaTV 5 жыл бұрын

Has anyone from snap on bothered to check coverage for Australian cars? Will it do territory and falcon ball joints?

@danielgaul1607 7 жыл бұрын

This tool is great. It is listed at around 740$ but they will work with you a bit on that. If you think 200$...your just not on our level.

@ramilcapalar8896 5 жыл бұрын

how much?

@leotech93 7 жыл бұрын

I have one, the best investment I have ever made.

@rodx5571 5 жыл бұрын

I bet those 3/4 ton diesels and bigger go smooth.

@alexanderdavilamachuca2268 7 жыл бұрын

Yo lo tengo es un pallo ¡

@thestig1899 2 жыл бұрын

Can you use this on wheel bearings ?

@bryndonbrown5141 Жыл бұрын

There’s not really a way to jig the clamp up to let the bearing come through so I don’t think it’s possible.. I would not try to but worse things have been done.

@etchosts8162 3 жыл бұрын

This no longer available online on snap ons site

@samczech7458 5 жыл бұрын

Matco new setup is way better

@cortezaz 2 жыл бұрын

It is nicer clip on set up, but it uses that bendy otc c clamp.

@filfa8420 7 жыл бұрын

i dont know wat is this,but this seems innovative,i will buy this but wat is this?

@vanphucnguyen7984 2 жыл бұрын

Giá U S d

@hddm3 7 жыл бұрын

Hahahahah more than 200 ahhahahahhahahhahahhahahaha wow your nuts

@hddm3 7 жыл бұрын

This is at derwin its around 700

@joecatable 6 жыл бұрын

Hi,I'm a pimp by trade. Are these balljoint removers good for slapping women up side the head if the money comes up short?

@travisgustin4677 5 жыл бұрын

joecatable lmao I’d say it would get the job done gotta be an adapter in there that will fit

@360fanboy360 7 жыл бұрын

how much im sick of the otc garbage

@subcomandante77 7 жыл бұрын

GLC522 700 in the tool truck

@derwin7594 7 жыл бұрын

Now the important question is how much??!!! If it cost more than 200 dollars then FORGET IT!!!!

@BruceAllentools 7 жыл бұрын

hahahaha

@BruceAllentools 7 жыл бұрын

its snap on bro 600.00

@BigMac2222 7 жыл бұрын

Thanks for setting us all straight on that big guy. Hey snap on.... you listening??!!! derwin said so.

@BruceAllentools 7 жыл бұрын

you got it!

@johnversluis3084 6 жыл бұрын

its $715 I traded my master ball set from mac tools and I have never been happy you really get a great press if you won't invest the money buy OTC and you will be wasting your money

@autogamer6404 6 жыл бұрын

You can get one at amazon for 40 dollars and it does the same thing only thig the amazon one dosent have is the adapter holder but everything else is the same don't spend 600 dollars on that its a big rip off

@lovetolearn5253 5 жыл бұрын

Auto Gamer lol yeah right I bent 3 from amazon. I do alot of balljoints You can't compare. I do get snap on is over priced on alot of things and some what over rated. In this case you get what you pay for.

@purestress2 5 жыл бұрын

@@lovetolearn5253 I agree! There are somethings you just have to go with snap-on for.. It's worth the money in this case!

@rodx5571 4 жыл бұрын

Ha Ha, you must be a shade tree, harbor freight tools kind of guy. Everything i have by Snapon is holding up, 20 plus years on some things. I used the 50$ harbor freight ball joint press for a few years. I have the BJP1 by Snap On, and yes i paid 700$ new for it, but man what a difference. I can do the 3/4 ton diesels and some 1 tons with EASE. I even use it to install upper control arm bushings, more than meets the eye with this tool. If you are a professional and you do alot of ball joints, this tool will save much time and effort. I was doing ball joints on a truck, fought me every step of the way. next truck like it i had the BJP1, it went smooth.

@lovetolearn5253 3 жыл бұрын

@@carrepairandtoolsvideos it really depends on what you work on. Even though its a balljoint press there are many uses bushings, driveshaft ujoints, stuck sleeves and so on. I work on everthing from a 2 door cobalt to a 3500 so for me yes its worth it. Not so much new for 700$ but i got mine for 300 used. I tried cheap tools fuel or coolant gauge pressure testers, presses, sockets and i had to upgrade evertime because they all failed and go with snap on, matco,otc,mac, Lisle and so on. If your buying it for 1 time use then its worth but dont plan out getting 3 uses especially if you live in the salt belt. I not joking i bent my first amazon press after 2 uses. The second one bent on the first use. When i started working on cars i really thought mac snapon otc matco was just a name and Harbor Freight or Amazon would be fine thats mainly because of guys on KZfaq saying that. So when i opened my own shop i cheaped out on stuff and that was a huge mistake.

@WrecklessEnterainment 2 жыл бұрын

This tool is not a rip off. There is literally no other ball joint press that even comes close to this one.