Snap On Roll Cart Tour: What’s used daily and kept handy for use

Рет қаралды 123,048

5 жыл бұрын

Here is what I keep in my roll cart: these are items that are used frequently and always an arms reach away. #snapon #toolboxtour #koontrucking
Thanks for watching ! I truly appreciate each view that I get on each and every video.
If you are interested in Koon Trucking or Diesel Medic shirts are stickers there should be a link to the teespring store where you can purchase these items.
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime ! If you like my content be sure to hit that “Bell” and it will notify you when I have a new video come out.
Here are some of my favorite links to get some super cool items off Amazon.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
Irwin 34 pcs Bit Set (same as Matco MQC34C) for $47.99 vs $153.85
www.amazon.com/gp/product/B00...
Milwaukee 3/8” adapter to convert your impact into a 1/4” bit driver:
www.amazon.com/gp/product/B00...
Vampire Tools Kevlar Shears (these bad boys will cut, designed to cut Kevlar so you know they are tough, I love these things!) : www.amazon.com/gp/product/B00...
Vampire Tools 8” Extraction Pliers (these things are amazing):
www.amazon.com/gp/product/B00...
Vampire Tools Super Combo Scissors (these things will cut anything! I’ve cut a bunch of pennys in half with them and they stay sharp):
www.amazon.com/gp/product/B00...
Lang Tools Master Feeler Gauge Set (the most complete and best feeler Gauge Set I have found):
www.amazon.com/gp/product/B00...
Power Probe Master Combo Kit (this thing makes finding broken wires a breeze):
www.amazon.com/gp/product/B00...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light and it is very bright):
www.amazon.com/gp/product/B01...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com/gp/product/B00...
Streamlight Stylus Pro Rechargeable Flashlight (I carry this in my pocket daily):
www.amazon.com/gp/product/B00...
Coast A9R Rechargeable Penlight (this is an amazing light, wear it in my shirt pocket, the circular beam is awesome!):
www.amazon.com/gp/product/B00...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com/gp/product/B00...
If your tools are stained or really dirty then Citrol is your friend ! This stuff works magic on rubber grips, impact guns, plastic etc. :
www.amazon.com/gp/product/B00...
Email: koontrucking101@gmail.com
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow me on Instagram: KoonTrucking
Check out www.vampiretools.com and use the Coupon Code: KOON15 for a 15% discount off your entire order plus get free shipping to anywhere in the Continental U.S.
Be watching for upcoming videos as we put these Vampire Tools to the test !

Пікірлер: 197

@timnewby115 5 жыл бұрын

A little quick video with a lot of useful ideas. Thanks Clay. Enjoyed it.

@nevillepretorius8948 5 жыл бұрын

Thanx Clay, really liled the video. Your rollcart is LOADED with awesome tools. Like that everything is so organized. 🤘

@joemagarelli1356 5 жыл бұрын

Clay love how you keep posting videos even though it’s not Friday. Thanks for your hard work.

@vincentreid6048 5 жыл бұрын

Thanks clay. I love the show. as all ways. From the 🇬🇧 👍

@santanar79 4 жыл бұрын

loved it, straight to the point. best review so far

@1234cdsarver 4 жыл бұрын

Thank you my brother I’ve looked around your tool cart seems to be the best to get .God bless you my brother

@2eagle37 4 жыл бұрын

Great tool cart tour...love your tool and toolbox collection.

@wolleysegap9740 2 жыл бұрын

Thanks for the tour Clay.

@user-bh2fq8in6h 6 ай бұрын

Very nice tool cart. Very organized and clean tools. Thanks keep the videos coming 🪛🪛🔧🔧👍👍😘😘

@melvinsheppard279 5 жыл бұрын

I like the set up in the roll cart , very nice.

@TheTheomax 5 жыл бұрын

Everything is organized that's what I need to be better at. I spend a lot of time at work organizing the shop but it never get completed always a on going project. The Roll Cart is super nice and clean!

@BeardedSeabee82 5 жыл бұрын

Good cart with the slide tops are great! And true those oem lights awesome. Looks like you got her all setup nice!

@gregcothrum4045 5 жыл бұрын

Good video clay nice box and tools y'all have a good one and stay safe 👍

@MrTblake2055 5 жыл бұрын

Gotta love the slide top carts!

@brianreese9318 4 жыл бұрын

Love the box color and box 📦

@jamesflanary8146 4 жыл бұрын

I picked up a ct761 a couple weeks ago. Not a cheap tool. But I love it, I use it pretty much all day everyday. Used one from a coworker a couple times before buying one, highly impressed at what it’s capable on breaking loose, from under the hood, to brakes suspension even some things under a dash. Doesn’t have the most torque in the world but for all around use, works fantastic and I’d recommend it to anyone in the automotive world.

@TheOnebadgmc 5 жыл бұрын

I have the crp123 as well. And I love it for reading and clearing codes at home I just got the launch x431 pro to use at work it is bidirectional. That is awesome too. It also does medium duty trucks.

@schoder78 5 жыл бұрын

Nice review and enjoyed your service cart needs.

@huangyi8451 Жыл бұрын

nice video!! thanks for showing us!!

@wayneshanks148 5 жыл бұрын

Awesome box and tool's brother

@joe-ng3ky 5 жыл бұрын

I like how the top slides great idea I wish mine did

@dakotataylor7909 4 жыл бұрын

Just pulled the trigger on one these carts, tan with metallic orange trim, stainless top and I’m so excited to get it as organized as yours clay. Love the channel keep on keepin on brother

@KoonTrucking 4 жыл бұрын

Ohhhhh that’s gonna look good !

@Mech-Ray 2 жыл бұрын

I was in the market for a tool cart so as to save time between jobs in the shop.(auto technician) two days after watching this video my snap-on guy shows up with this same cart. All of my tools are orange, so it couldn't have been better. The cart was "used" less than a month old. Purchased it for $1,500 and I couldn't be happier. Used your layout as a guide line for setti g the cart up. I gotta say it saves me so much time throughout the day, which is very valuable as a mechanic. Time is money. I appreciate your videos, they are no nonsense straight to the point. Keep up the great videos.

@tylerjohnson102 3 жыл бұрын

That's clean for a mississippi boy. 👏

@6.4DieselDoctor 5 жыл бұрын

We’re still using mostly standard in our shop. Metric is only for our Detroit’s and Eaton transmissions. Sucks buying both but gotta have it lol. Great review sir.

@gangesexcavating 5 жыл бұрын

You’ve got a lot of money into that roll cart. It’s great quality, nice colour, and it’s really mobile. Looks really good.

@squeaky166 4 жыл бұрын

I like your tool cart; wish I had one in the extreme green!

@markgreczkowski8684 4 жыл бұрын

Clay, a suggestion to prevent your wire stripper handle covers from sliding is an old trick we use to use with motorcycle grips we used to use is pull them off and use some hairspray. The hairspray will allow to side the grips back on, but when it dries it holds the rubber tight, and you can replace them down the road, if ever needed without doing damage to the tool. Just as thought that might help you. Thanks for all the videos & reviews - I appreciate the honestly! To you, your family, team - Stay safe & healthy

@I_like_turtles_67 Жыл бұрын

Works on BMX grips too.

@Ram2253spd 5 жыл бұрын

I use that same orange Matco ratchet everyday. It’s very comfortable to use.

@fatknucklesproductions7517 5 жыл бұрын

I use to would only buy snap-on ratchets, then I got a Matco, then another, then another. I love them

@martinschaffmeir7729 5 жыл бұрын

Very nice tools sir.

@AM-nn9sv 3 жыл бұрын

The charger to that Cornwell light is in your newer top box, on the right smaller drawer. Lol. Have a great week Clay!

@johnclintonmusicandmore 5 жыл бұрын

Nice tour I like the box

@JoeJalopy 4 жыл бұрын

Ha, complete, organized and clean!

@xandersmith9832 5 жыл бұрын

Nice setup clay

@matthewslauenwhite7277 5 жыл бұрын

I have run completely out of room in my big box so ordered this exact box 2 months ago in combat green. Been trying to make plans on how to organize it with my regular tools and I really appreciate this one. Thanks for showing

@mac_91 4 жыл бұрын

Do a review.

@RunninGunner04 Жыл бұрын

How long did it take to get it? I just ordered the same exact combat green one but with the stainless top

@ridingwiththereids 4 жыл бұрын

No shit. My dream cart with the exact setup I'd love to have. Awesome setup man. Love it and the channel. Keep up the awesome content 👍 Your viewer from North Pole, Alaska.

@KoonTrucking 4 жыл бұрын

Thanks for watching. I appreciate it !

@dieselmechanicsam 5 жыл бұрын

I'm actually about to purchase a Matco JSC773 cart as my "main" box for the next... Hopefully couple years to replace my 4 drawer Husky cart, so I like seeing you guys with a well stocked roll cart. Yet another awesome video Mr. Koon keep up the good content👍

@KoonTrucking 5 жыл бұрын

Thanks for watching

@antonioV96 Жыл бұрын

I know you got rid of this already but I JUST ordered mine. On back order so I’m sure it’ll be a minute but I’m super excited for it. Great to see how you organized yours

@markebbage9996 3 жыл бұрын

Nice to see "inside" Clay

@justindelcarmen8386 5 жыл бұрын

Nice I got that same KRSC430 cart but in storm gray. Very well setup for everyday use.

@KoonTrucking 5 жыл бұрын

The storm gray is nice too. They are really good carts. I love mine

@donaldhollums3278 5 жыл бұрын

Thanks for the free tour. Hey Clay, it looks like you need a plier rack!😁

@KoonTrucking 5 жыл бұрын

Haha been trying to get one

@corykobelski4215 5 жыл бұрын

In the words of J Young you need two CT761 impact guns lol . Awesome videos Koon trucking. 👍👍👍

@AutobahnDan 5 жыл бұрын

Nice cart tour! Hey! Just got your stickers! Very nice! Just posted them up on my ig page! 👍👍

@sethwright 5 жыл бұрын

Nice cart!

@harold6863 3 жыл бұрын

Neat Clay respect

@Hyied 5 жыл бұрын

You should do a tour of your shop for a video that would be pretty cool

@swampdogglawless88 5 жыл бұрын

Nice tool cart

@naterodas5785 5 жыл бұрын

If you prefer soldering you gotta try out the Milwaukee m12 soldering iron. It's a beast and you wont regret it!

@jonathanvanginkel3849 5 жыл бұрын

First nice setup

@connor393 5 жыл бұрын

Best roll cart I have seen, organized, nice tools, everything has its place, obviously a pro

@tylermay12312ify 5 жыл бұрын

So I’m a total noob when it comes to fixing cars and crap. But 2 hours later I changed my oil 😂😂😂

@That_one-guy192 5 жыл бұрын

It doesn’t matter if it took you 2 minutes, 2 hours, or 2 days. You’re learning and that’s what matters!

@Tap-a-roo 5 жыл бұрын

@@goinhot9133 Just because you take something to a dealer doesn't mean they'll do it right either. I've taken my car in to Mercedes on several occasions (for items under extended warranty) only to have them screw up the entire job so bad, I ended up doing it over myself. You can buy a lot of Snap-on tools at $165.00/hour labor rate.

@danielsoule3737 3 жыл бұрын

Fulcrum $165/hour labor rate isn’t what the technician is making 😂😂😂 that would be awesome though, I’d be a rich man

@bobbygarrett9588 5 жыл бұрын

The Bosch HD Code Reader use to be my go to before my JPRO purchase last year. I could trick Re-Gen those dastardly Peterbilts with that fine piece of equipment.Still keep it on the truck though. Thanks for another great video.

@KoonTrucking 5 жыл бұрын

Shoot me an email koontrucking101@gmail.com

@nickshowsstuff435 4 жыл бұрын

I know this was a year ago but if you like that but holder check out the Milwaukee circle bit holder I love mine it’s like a hockey puck size that twist it’s perfect to not lose any and organized perfectly.

@ISITWORTHIT 5 жыл бұрын

hey man get the platinum ratcheting wrench set (double box end) (plt99650) it is amazing! your snapon guy has it, or can order it! best money i've ever spent!

@jamescaron6465 2 жыл бұрын

You can tell a pro by how his tools are organized in what condition they are in. Granite things happen when they get used but if they’re not dirty and they got crap all over him you can tell that that’s how he does his work. I worked in the industrial side of things back when snap on had an industrial program and Stanley used to come around with Proto so I have mostly Snap-on Proto and some Mac.

@DDescalchuk57 3 жыл бұрын

Nice cart! Toss them trays that the tools come off the truck in into the garbage you’d double your space lol

@airratchet7313 5 жыл бұрын

I have just about all those tools, those Matco scrapers are the shit. The guys at work were not believers until they saw them in action

@KoonTrucking 5 жыл бұрын

They are awesome. I don’t see how they work like they do but they work !

@sledsports 4 жыл бұрын

Get you a good set of wood chisels. Best gasket scrapers I have ever had.

@1234cdsarver 4 жыл бұрын

Cool thank you

@anthonyacosta5336 2 жыл бұрын

Nice Set of Tools...Over the year's I've only used about 50%..of those tools on a regular basis... I quit buying complete sets on some items.. As most Techs Know...you can open your box and see which tools are used the most...I've been Wrenching for 30+yrs now...I Hate clutter And unused stuff in the way...I Keep it Simple and Productive.

@michaelkeysor9852 5 жыл бұрын

That electric orange is about as fine as frog hair!!! The magnetic matco tray is nice too.

@mechanicmike1236 5 жыл бұрын

I have a blue point slide top and I didn’t care for it, but seeing the Snap-On one, definitely like the drawers in the slide top! I was like wow, never saw that before what a great idea. Thanks for the tour!!

@mikedavis8026 5 жыл бұрын

And you'll be dumb enough to buy it just because it's snap on

@henryproctor2193 5 жыл бұрын

Needs a sock drawer lol 👍

@dickskinnersshopandsnapont6718 5 жыл бұрын

I gave my snap on roll cart my orange one away to a kid in high school I wish I never did watching this is going to make me go back to the snap on truck and get another one he had a nice black one on there she didn’t got it

@KoonTrucking 5 жыл бұрын

I love that cart. The slide top is what’s up ! Never again a flip top for me !

@cliftonsr 4 жыл бұрын

I'm buying this roll cart it's 40" wide and rolls good under a car on a lift without a top bumping the undercarriage of the car.

@whatfreedom7 4 жыл бұрын

A coworker has one and I can’t believe how much stuff it will hold.

@Chrisk1500z 5 жыл бұрын

So those are Wally’s tools too right? Hahahahaha very nice cart extremely organized and clean definitely shows the level of professionalism you have!

@KoonTrucking 5 жыл бұрын

Thank you. They cost a lot of money and honestly i enjoy opening my drawer and seeing nice clean shiny tools.

@Chrisk1500z 5 жыл бұрын

Koon Trucking same here! A clean tool is a happy tool lol

@JustinDowDIYcentralhighway 5 жыл бұрын

Nice Cart. Thanks for sharing 👍☕️

@donaldpainter956 2 жыл бұрын

Try the new snap on wire strippers they go straight on the wire great for tight spaces

@spiritualhouse2 5 жыл бұрын

Love the video I've mentioned it before on this channel but if you love that 14 volt long ratchet you really need to check out the new aircat long ratchets they have saved me alot of time and aggravation

@ronanderson1816 3 жыл бұрын

wow!

@niteninja0133 5 жыл бұрын

Do you use the snap on super thin socket and wrench set? Ive wanted one but am unsure of it. Good video. I just picked me up them new snap on flat hose pick set and 2 more rathets. I wont use them i just love snap on ratchets lol

@leeregan8017 4 жыл бұрын

Hi just a quick question is your tool cart a 33inch or 40inch wide version? And thanks for another great video I love ya Snap-on Fridays!! Keep up the great work! Thanks Lee

@nitrous07me 3 жыл бұрын

Have you done a video on that launch scan tool by chance?

@chanimal23 3 жыл бұрын

As always, another good video! This will be my go to cart. Before I order one, can you pls let me know how tall it is? and how wide? I guess this one doesn't have the openings for pry bars, breaker bars or screwdrivers on the top drawer? Thanks in advance....

@KoonTrucking 3 жыл бұрын

It’s 40” wide and about 20” overall deep 6 drawer. No it does not have the spaces for prybars in the top.

@petervavaroutsos449 4 жыл бұрын

Very well organized. Where do the pry bars go?

@KoonTrucking 4 жыл бұрын

I have the short ones in the hammer drawer and one long one in the bottom but the ones that won’t fit in the roll cart i keep in my toolbox.

@txta786 4 жыл бұрын

Sweet box. I could just open a couple of them drawers and stare all day. Would you recommend the Knipex PWZ over the Snap on/Bahco ones?

@KoonTrucking 4 жыл бұрын

Both are great honestly.

@robertmunoz11 3 жыл бұрын

Thought i was the only one who liked whip hoses

@wilbertcoria4768 Жыл бұрын

Dude I want to fix my roll cart like yours can you do an update on it

@danieltubbs458 5 жыл бұрын

Hey Clay what is the part number for those red snapon screwdriver set as seen @3:38

@danielborrego4500 4 жыл бұрын

I need a wally and bill roll cart tour

@edwunmartinez7720 4 жыл бұрын

Boss can you please I'm New as diesel tech can you give us what exactly what kind of tools I need to work tank you nice car tool

@nelsonnarciso1791 5 жыл бұрын

Where's the stash food drawer lol.

@allenmccall5021 5 жыл бұрын

Where can I get one of those monster wrench extenders?

@dickskinnersshopandsnapont6718 5 жыл бұрын

Prolink ultra next time you get time try to do a video on there really would like to use that on international trucks for region

@KoonTrucking 5 жыл бұрын

They work good. I’ve done a video on it before. Can’t remember which one it was but i showed how it works

@paulrebis3439 4 жыл бұрын

Hello mr clay I had a question. I’m a big snap on fan as you are also. I have every snap on ratchet. But after your video I seen them Matco black locking flex head ratchet. How do u like that ratchet. I been wanting one since I seen that video.

@KoonTrucking 4 жыл бұрын

They are awesome. Very smooth

@jamesritter9806 4 жыл бұрын

@ koon trucking what do you think of the gearwrench pinless swivels? The x-core i beleive there called

@KoonTrucking 4 жыл бұрын

They are really good I have beat the hell out of my 1/2” ones and they still hanging in there. I’ve posted pics of them on my Instagram page you can see how much abuse they have taken.

@ThatVato213 2 жыл бұрын

How do i get one of the cup holders for the tool box like urs

@mho6129 5 жыл бұрын

Is the head of the Marco ratchet smaller than Snap-on or is it the angle?

@danielbaruk4307 3 жыл бұрын

What’s the part number on the slack adjuster long handle tool 🤔

@GottaJibboo 2 жыл бұрын

Howdy Clay, how many ounces are those three hammers?

@mohmand76 4 жыл бұрын

Where did u get blue snapon wrenches

@ranct1815 5 жыл бұрын

Long neck 3/8" cordless ratchet is one good tool and can be used as a semi breaker bar

@danielgiebner9075 2 жыл бұрын

Who makes the best sockets sir?

@sambanchin3291 5 жыл бұрын

What the part number for the snap on tire chuck?

@rogerfranco903 Жыл бұрын

What's the tool number on that green socket organizer

@dalehall2993 3 жыл бұрын

matco part#ezsold too hold wires when soldering..

@YouTubeWatcher541 Жыл бұрын

How do you keep your tools looking barley used

@my67faststang1 5 жыл бұрын

Mr. Clay may I ask why the Matco ratchet is one of your likes. Thanks for the upload I almost thought when I got the notification it was Friday :)

@KoonTrucking 5 жыл бұрын

I pretty much only use snap on ratchets. We had issues (to say the least) with our old Matco guy not wanting to warranty stuff. I bought the matco ratchet to support Michael and have used it and I have to admit i like it. I still prefer the grip on the snap on but the matco ratchet is nice.

@Nick-xt2mj 5 жыл бұрын

my67faststang1 was gonna ask the same question I’m thinking about getting a 3/8 with a green handle lol

@my67faststang1 5 жыл бұрын

Mr. Clay thanks for your thoughts on that and your honest opinion. I am the same way all Snap-on ratchets but I bought a Matco for the same reason to support the new dealer in our area and so far ratchet has held up fine. Thanks again for taking the time to make and upload videos, I own a diesel shop as well and the days can be pretty hectic because you know if those trucks ain't running down the road they ain't making money.

@my67faststang1 5 жыл бұрын

I bought one and like Mr. Clay stated for some reason the handle is a lot harder to clean then the Snap-on's that I own.

@melvinsheppard279 5 жыл бұрын

What's the part number on the tire chuck please !!!!