SnapOn CT8850 Impact Wrench Tool Review - 18V Brushless - AWESOME!

No video

SnapOn CT8850 Impact Wrench Tool Review - 18V Brushless - AWESOME! - Bundys Garage

Рет қаралды 24,618

Күн бұрын

Reveiw of the Snap On CT88500 Brushless 18V Impact Wrench. This thing is awesome. If you have any doubts, bougt no longer. You will not be disappointed.
I show you a few examples of how the crankshaft pulley bolt has to be taken off with sheer strength, well this gun takes it off all by itself.
Description
600 ft. lbs of Torque Output - High torque output breaks stubborn fasteners loose easily
Digital Microprocessor Controlled Switch - maximizes performance, runtime and durability
Built in Brake - Stops anvil and prevents tool from throwing fasteners and sockets
Built in LED - Super bright 1 watt LED illuminates work area
Integrated Battery Management - Prevents battery drain and prolongs tool life
USB Built into charger
Temperature Protection and Shut Down - Protects the tool from excessive heat damage
LED Fault Signal - Provides a visual warning the tool is going to shut down
Soft Start Trigger - Ensures smooth start up of tool
Rare Earth Magnet Motor More torque output, less battery drain
Includes impact wrench, (2) CTB8185 MonsterLithium battery packs and CTC720 charger in CTUTOTE tote bag.
CE- DE, ES, GB, FR, IT, NL
GO BUY IT
Music by Randall Kent: As seen on NCIS
• Randall Kent - Going H...
All Rights Reserved 2015
© Copyright 2015
Bundys Garage
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part with out the express written permission. Contact: bundysgarage@gmail.com
DISCLAIMER - DISCLAIMER - DISCLAIMER
Due to factors beyond the control of BundysGarage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. BundysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BundysGarage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BundysGarage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not BundysGarage nor any of it’s subsidiaries.

Пікірлер: 109

@betok3382 8 жыл бұрын

Just bought this impact today...first snap on tool I've ever bought. Hope it doesn't disappoint.

@BeefinTahko 3 жыл бұрын

Poor soul.

@bundysgarage 3 жыл бұрын

Poor soul cause it sucks?

@codyrobertson4630 8 жыл бұрын

I wouldn't waste my money on Snap On cordless tools. I love their hand tools but Milwaukee m18 line and IR 20 volt line offer much more affordable cordless impact wrenches that are built with better quality and more options in power tools that will run off the same batteries

@bundysgarage 8 жыл бұрын

Are they brushless like the Snap On is?

@codyrobertson4630 8 жыл бұрын

+Bundy's garage The Milwaukee fuel impact wrench (5year warranty) is 1,100 ft.Lbs of break away torque and it also has three power mode setting for when you don't need all that torque. And dewalt just released a 20 volt brushless impact wrench that has similar sates to the Milwaukee and makita will also be releasing a high torque brushless impact wrench around the first of February.

@codyrobertson4630 8 жыл бұрын

+BundysGarage the dewalt dcf899 and the Milwaukee 2763 impact Wrench's are both priced at 349.00 with one 5ah battery in the kit and 449.00 for 2x 5.0ah batteries included in the kit

@bundysgarage 8 жыл бұрын

I would love to test the DeWalt. Thanks for sharing great information.

@wayned3137 8 жыл бұрын

+BundysGarage snap on isn't brushless

@sandrinericordeau1388 2 жыл бұрын

Nice design, works well and very easy to set up.

@stefanczechorskidds5536 5 жыл бұрын

You would have trouble giving one away today! Only 3.5 years ago they were all the rage.

@lmiller4121 8 жыл бұрын

I had similar problem with a Craftsman and Snap on so when called for another round I went to a Milwaukee m18 fuel 3/4 inch and the bolt yielded easily. And it was cheaper.

@bundysgarage 8 жыл бұрын

What was the price of the Mileaukee?

@lmiller4121 8 жыл бұрын

+BundysGarage I got a discount that took the price of the wrench,tool only to $289. I got the charger and one 5.0 battery at Home Depot for $60.

@nutsackmania 7 жыл бұрын

Snap On owns the 3/8" gun still (CT-8810), but the M18 Fuel is the way to go for 1/2" these days.

@jimbola77 3 жыл бұрын

hey partner that is really funny i went through the same thing as you I have the same snap on as you I purchased it in2016 but it is not brushless? I paid 7 also.

@Toolaholic7 7 жыл бұрын

Snap On does not use brushless motors yet,uses brushed motors still.

@taylorjams4845 5 жыл бұрын

I was looking to see if anyone already made this comment. They're still developing and testing their brushless.

@andrewmesser334 5 жыл бұрын

They do now

@taylorjams4845 5 жыл бұрын

@@andrewmesser334 yes. They do now. I traded in my brushed for the brushless last week.

@andrewmesser334 5 жыл бұрын

I traded mine today

@ShamelessTR 8 жыл бұрын

Snap On's Electrics just fail to impress. They make some of the finest automotive hand tools in the world... But I'd go with Milwaukee or Dewalt any day of the week. Even the red bodied Dewalt that says Mac on the side is a better choice in my opinion. Oh, and my 1/2 inch AirCat 1250k tears Honda crank bolts loose with a regular deep well socket every day.

@bundysgarage 8 жыл бұрын

+ShamelessTR I didn't buy this gun, I was able to test it out and I was really impressed.

@ShamelessTR 8 жыл бұрын

+BundysGarage You should get the Dewalt or Milwaukee in your hands and then tell us how you feel about the Snap On.

@cowfateater 7 жыл бұрын

I have the Milwaukee M18 1/2" impact wrench and two of my co-workers have the latest Snap On 1/2" wrenches. I have heavily used my M18 wrench every day (work day that is) for over 2 years now, I often use it until the metal end cup is too hot touch comfortably. I have compared my M18 along side the Snap On wrench many times and the M18 out performed it every single time. The M18 feels solid and formidable in your hand whereas the Snap On wrench feels somewhat light duty and timid. One of my co-workers burnt his up after owning it for only about 6 months, fortunately it was within its 1 year warranty, by the way the M18 has a 5 year warranty. If you are looking for a quality battery powered impact wrench, buy the Milwaukee, I haven't come across a better wrench. If you are looking for quality hand tools such as, ratchets, wrenches, screwdrivers etc., buy Snap On, I personally think they are the best on the market.

@donovansmith1548 7 жыл бұрын

snap on was once a good tool but that's all there is name milwaukee are great ingersoll and dewalt thinking a head

@NamesAA 7 жыл бұрын

All the torque is going to waste when you let the gun wobble around like that. Push the back of the gun in.

@bundysgarage 7 жыл бұрын

+a ok

@danielpolanski7468 5 ай бұрын

If its brushless then why its have a brushes? Not only has them but there are two versions. One is CT8850 and CTEU88500 and the second one uses 4 brushes and anvil is 50g heavier and has double niddle bearing around anvil when the other one has 2 brushes one niddle bearing and also uses motor from 7850 older model so it's actually same impact wrench as older model with additional electric brake. You welcome.

@CamaroWarrior 8 жыл бұрын

for that you get a Dewalt DCF899 its half the price of this with battery and more power

@crbake 6 жыл бұрын

Bought the dewalt 1/2 drive with 1200 break away torque at lowes on sale for 271

@bundysgarage 6 жыл бұрын

+crbake plz update us in 1 month how you like it

@fsoto2780 7 жыл бұрын

strap on! jk they way over charged for there tools but there good tools but not for beginners Tech's only if they can afford them

@nathanhansen8462 8 жыл бұрын

you know what, I really don't want to be that guy. but I have to, I absolutely love my ct8850 I bought no more than 3 months ago. but they are NOT brushless, none of snap ons cordless tools are and I have the 8850, both of the 14.4 volt impacts, the 14.4 impact driver and I'm looking to get the polish prep tool as soon as my rep get it back on stock. what the 8850 has going for it motor wise is it has 4 brushes and its a rather large motor. it's probably going to be a few years before we see a brushless motor from snap on.

@andrewmesser334 5 жыл бұрын

Yep, good call. They just released the brushless version

@rmartinjr83 8 жыл бұрын

I have the ct8810a 3/8 drive

@Banshee365 7 жыл бұрын

That tool is not brushless.

@popapop1991 8 жыл бұрын

I have the Milwaukee 2763, Ive done about 9 timing belt jobs on hondas and it has always removed the crank bolt in less than 2 seconds with a regular deep socket. I love Snap on hand tools but their electric tools are too expensive and not as good as Milwaukee, IR, and Dewalt.

@kevinfrye1822 3 жыл бұрын

That thing is not brushless and the w7152 Ingersoll rand walks all over the Milwaukee and Snap on . I have all 3 and had to have the smap on rebuilt 3 times in a year before they gave me a new one after raising cane .

@jeffomalley100 8 жыл бұрын

Is that 600 break away torque?

@6.4DieselDoctor 5 жыл бұрын

Jeffrey SmokeyBones O'Malley 600 working and over 700 breakaway

@sethdesjarlais 8 жыл бұрын

CT8850 after less than 3 years of daily use the brushes are totally worn. motor is sealed and brushes cannot be replaced. $700 tool that will get less than 3 years if used daily. snap on quality is bullshit

@chriscape3136 7 жыл бұрын

Seth Desjarlais the brushless Milwaukee is a much better tool for a much better price and warranty

@cowfateater 7 жыл бұрын

Snap On quality is unmatched. Snap On does not make the CT8850 impact wrench. Snap On makes some of the finest hand tools on the market with unmatched quality.

@chriscape3136 7 жыл бұрын

Snap on undoubtedly has the best ratchets and wrenches made out of anyone

@marcsmith3881 7 жыл бұрын

It depends. I have a CT3850 that I still use 14 years later. I have used it as a Mercedes Tech and 11 years in my own business almost daily. With rebuilt batteries, it still pulls stubborn lug nuts and CV axle nuts without a problem. I can only imagine that it has seen 1,000s of lug nuts/bolts over the years. I have an IR7150 for the really nasty stuff.

@kraybrother8768 6 жыл бұрын

The shit is not brushless fuckers

@jimbola77 5 жыл бұрын

snap on snap off!!! use the impact.

@bundysgarage 5 жыл бұрын

Not everyone can afford this impact gun

@dopiaza2006 8 жыл бұрын

You realise that the '0' at the end is actually a 'O' as in Orange? Model is ct8850

@steezyfishing 8 ай бұрын

yup

@chrisyo295 5 жыл бұрын

Question for everyone witch gun is better. Snap op. Milwaukee or Dewalt. Im about to get one but i don't know what to get

@lorrierushton4896 5 жыл бұрын

buy milwaukee or dewalt cause i own the snap on and it was sweet the first time i used it and it went down hill from there and needs a motor now and the only way to get it is threw snap on $100 service fee to start what a joke snap on sucks

@chriscape3136 7 жыл бұрын

it's not brushless, and it's an alright gun, but is nothing compared to the IR w7150, Milwaukee 2763, or even the dewalt dcf899

@trickmytruck32 8 жыл бұрын

like the Orange or is that trd

@wayned3137 8 жыл бұрын

snap on 8850 is not brushless

@devinsmith4151 8 жыл бұрын

The Milwaukee Fuel 1/2" will take less time than that.

@wendellgreenidge3362 6 жыл бұрын

Who the hell uses an extension that Long to break a crank bolt loose??????? An amateur that’s who

@bundysgarage 6 жыл бұрын

+Wendell Greenidge ok professional tell me how your going to clear the fender?

@wendellgreenidge3362 6 жыл бұрын

Not one Honda have I used an extension, just a chain wrench or Honda crank tool and breaker bar with deep socket or my impact. That’s how amateur

@gfriedman99 6 жыл бұрын

The extension will twist and you lose torque. Pros dont use extensions

@chayton94 6 жыл бұрын

Put a 1/2 breaker bar in and bump the motor. Easy as pie

@stever5887 6 жыл бұрын

Chayton--Tell me, though, are you HOLDING onto to the breaker bar at the time? It sounds like it couldbe a recipe for snapping your wrist. I'm not 6'2" and 275 lbs., so it's a legitimate concern. It's possible that bolt may have been Loctited in place, so how long is your breaker bar; 2-feet? 3-feet long? Are you using a length of pipe over the breaker bar? A few more details, please.