You put a magnum primer in your .308?

@@OFFICIALUND sorry, my bad. It is actually 210, so not Magnum. I also load with 215 but not for 308 Win.

We all know f class shoot Borden custom action and bartlein 32-33 inch barrel here in the US. We all shoot 284 for F open

I bought factory berger loads of 130s and 140s and they were stacked. .25" at 100. I need to try these 136s tho.

I kinda feel like AI is overrated. Probably one of the best guns similar to this is the Tikka Tac A1. This TRG looks amazing tho. The quality in these rifles is outstanding.

​@@camonly849 You "kinda feel" like AI is overrated? You're wrong. I HATE the company Accuracy International. I also hate KAC for similar reasons that I won't bore you with. And while KAC is absolutely overrated, AIs are not. I wish they were because I don't like giving money to companies that I don't like, but even after my frustration with AI (that involved my AXSA, I bought an AXSR and an AX50 ELR). I have two TRGs (non A1s) and they are amazing guns, too, but nowhere near as rugged. The AI will still be functional 500 years from now (assuming the plastic skins can be replaced and in 500 years you should be able to "microwave" some), and the TRGs will not. The TAC A1 is potentially the best bang for your buck gun you can get, but it's nowhere near this TRG A1. The average shooter may. never appreciate the differences, but people who put thousands of rounds downrange each year will be willing to pay more for the A1. The reason I said the TRG is nicer is because it's lighter, has a better trigger (this is preference), and has a better aesthetic (note that AIs are NOT Keymod, though). They will both shoot 1/4 minute with handholds (actually, we shot a new TRG A1 in just over a tenth (5 shot group) with the new TRG factory ammo). So, in short, AI the company sucks, but they make an amazing firearm.

Plates usually have a number on them, 600 yards for sure was one yard line

6.5 creedmoor will be ballistically accurate for at least 1600meters (1750yrs). Ruger won’t come close to the master precision and Quality Sako is offering. Ruger is like Ford, SAKO is Rolla Royce.

The ruuger is a great rifle, and you cannot go wrong with it. The TRG and Tikka Tac A1 will feel more quality in hand. The bolt in both is some of the smoothest you will ever find, even compared to AI etc. I have the Tikka UPR and with berger 140s factory load I held a .25 inch group first try. These guns are insanely accurate and insanely good. If you want a great rifle get a Tikka or Sako. My next will be a sako, since I do not have one. Good luck brother!

@@camonly849 Thank you! I'll be saving $4,000 to purchase the Sako and some accessories! Thank you once again!

@@meuls82 that will be awesome! Good luck!

@@meuls82if you’re a novice I’d strongly recommend buying the ruger instead, get used to that and really figure out what you like, also if you’re going to shoot matches you’ll find that the sako really isn’t the best option it’s more geared towards a service aspect, which frank is much more in tune with. Save your money, learn on the ruger, then build a full custom rifle exactly like you want for the exact same money with more parts and preference options.

No there are Tikkas for that

@@SHLowlight I actually bought this rifle with 308. in it and will try hunting but see how it goes usually big game but the size of the rifle feels like I need to get used to it?

@@SHLowlight haven't used it yet tho except a range

Ya the only reason he recommended tikka is because tikka makes lighter rifles more suited for walking longer distances etc. Once you out a can, bipod, scope etc it starts to get heavy. Either way it's not a wrong buy. You can hunt and do competition with it if you decide then.

They have been sold for the past year in Finland for 5900€, which is 6.5k USD

We just live together

I am gonna ban you too on here as well, you have said nothing knowledgeable and just act like a troll chasing my comments

@SHLowlight you have shooters with 4 years experience telling someone with a national championship what works. The moderators are all one sided as are you. Facts don't matter on typershide and you know it.

I have no clue what you are on about, you just say nonsense like we know what you are talking about @@lynndragoman2454

@@lynndragoman2454 If you are so smart and have a national title you would think you could garner some respect, but if you act like a troll you get treated like one. Do you wear your national title on a chain or is it tattooed on your forehead ?

@SHLowlight I realize you hate the more accurate forms of shooting but your putting your head in the sand on technology advances isn't doing you or your forum any good. It's okay for your your inexperienced shooters to trash someone who competes and runs matches but it's not okay when they get called on there BS? Your double standard isn't promoting the shooting sports and its why all the best shooters refuse to post on your forum. The guy who went crying to you has only shot for 4 years now and owns one gun. I have given shooters a half dozen guns to promote shooting. Funny how you only see one side so I guess they are paid advertisers?

I never banned you, I have multiple moderators and I Have no idea what your problem is, sounds like if you were banned for talking that stuff, you crossed a line and acted like a troll, but I have no idea who you are, I just see you hit all my social media, so the name has been repeatedly seen on my accounts so I answered you, GO bitch to Erik Cortina if you want to complain about tuners

I don't even know what your account name on SH is .... don't know you, period

John Baker is having no problem talking Structured Barrels, he is posting everyday

@SHLowlight since you own the forum look in my private messages and you will see me discussing structured barrels with Jon because I understand what he is after. I hold a BSME from Berkeley and a MSME from Ben-Gurion. If you check your statistics I was the 3rd most popular poster on your website. A structured barrel a tensioned barrel a tuner barrel all do the same thing they move the node which is 2.5 - 3 inches back from the muzzle closer to the crown. Picture a teeter totter and your moving the pivot point closer to one end. The seat end is still moving with the same amount of travel on one end but the other seat is moving far less thus producing less vertical. Whenever this is being explained Rio Precision Gunwerks chimes in with how he is a big manufacturer and Lynn knows nothing. The reality is his name is Dan Garcia and he does gun transfers in a storage shed after work from 5;30 pm to 8:00 by appointment only orders than 15 hours a week. The next nutjob calling me Linda in Tokay444 who has only owned 2 guns in his entire life one a 6.5 Creedmoor the other a 6BR. He is from Canada and shoots at the Galt facility mostly for plinking never in a match. Eric Cortina had Tim Sellars on his podcast and these same posters got you to delete the thread and Tim has been competing for 25 years and they combined have not one match under there belts. Your allowing of one sided banter is killing the board as everyone now calls it Typershide.

You clearly have no clue, what was your User Name on SH and I will look at who banned you, you claimed I banned you, I am saying I have moderators who ban people where I have no idea someone was banned, what is your account name on SH @@lynndragoman2454