Soft Close, Face Frame Hinge Installation • Showcase

No video

Soft Close, Face Frame Hinge Installation • Showcase

Рет қаралды 42,922

Жыл бұрын

In this video I discuss what soft close hinges I like to use, the tools that I use for the installs and how I try to make my life a little easier when installing the hinges and installing the doors onto the cabinet. If you stay to the end I have posted pictures and links of the items that I talk about in the video. I have also posted them below. I forgot to mention in the video the Texas canvas Wear apron that I am wearing.
This is not a sponsored video however the Amazon links are affiliate links which help pay for the time I use to create these videos. The Rockler link is not an affiliate.
Berta 1/2 inch Overlay Soft Closing Face Frame Cabinet Hinges amzn.to/3EmGNmF
Kreg Tool Company KHI-HINGE Concealed Hinge Jig --amzn.to/3E1pxlg
BOSCH CC2430 3-Piece Clic-Change 1/4 In. Self-Centering Drill Bit Assorted Set
amzn.to/48X5HWV
Woodpeckers Paolini Pocket Rules --amzn.to/3UOV5Sv
Bessey Clutch Style 6 in. Capacity Bar Clamp with Wood Handle - amzn.to/3SV7iVQ

Пікірлер: 76

@ddujon13 Ай бұрын

It was like a lightbulb turned on when you lined those hinges up with the level. Always nice to learn new tricks on a Sunday morning!

@BayneCustomWoodworking Ай бұрын

LOL, I am glad it helped

@brandonfrumolt3470 26 күн бұрын

Im recycling that trick using the level to square the hinges to one another. Thanks brother.

@BayneCustomWoodworking 26 күн бұрын

@@brandonfrumolt3470 Glad the help

@trustjah Жыл бұрын

the trick for lining them all up with a level or flat board is a major one folks

@bexaminer1 6 ай бұрын

This is exactly what I was looking for. I needed to figure out how to actually mount the door to the frame. Like you, I'm doing this alone. But clamping that piece of wood the way you did will make it a piece of cake. Thanks.

@BayneCustomWoodworking 6 ай бұрын

This is exactly why I like taking the time to post items like this. Other folks have helped me so I enjoy passing on how I do things. I am glad this helped. Keep making saw dust

@bexaminer1 6 ай бұрын

@@BayneCustomWoodworking I'll be on it tomorrow morning. And, I have a bank of four doors similar to what you had. Just clamping that piece of wood at the bottom and I'm sure to get a perfect fit. Made my day.

@GK-qz3cm 3 ай бұрын

Thanks for the great video. I just built my first shaker style doors and now at the hinge part. I have a face frame cabinet. Am using a small door to practice.

@BayneCustomWoodworking 3 ай бұрын

You are very welcome. Yep I practice on a dummy door each time.

@Quast70 Жыл бұрын

Perfect explanation and example of how to install these. I couldn't visualize how these hinges mounted to the frame. Thanks!

@BayneCustomWoodworking Жыл бұрын

Thank you. I am glad it helped

@csimet Ай бұрын

I've always used Blum hinges, but will have to give the Berta a look. They appear to be non-clip type like the Blum Blumotion soft-close, but allow easy three-way adjustment without having to loosen the mount screw like the Blum. I don't care for the removable clip type hinges, as they add too much width and get in the way many times when you want to add shelves, trays, pull-outs. I only use removable clip hinges in rare cases like corner cabinets with lazy susan bi-folds. Tip... if you do many doors, I think the Rockler JIG IT Deluxe Concealed Hinge Drilling System is a much better than the Kreg. It is made of mostly metal, permits you to setup for two or more holes per door with its rail system and has integrated clamps. I added a third drilling guide so I can easily do three hinges per door and ensure exact placement between multiple doors. Worth every penny it costs... ~$200 for the three clamp system I have.

@BayneCustomWoodworking Ай бұрын

@csimet I do need to try Blum but these are easy to install and adjust. And the price is right

@KenyonVetter 3 ай бұрын

Your Video was so good! It was very helpful to me as I am building a cabinet that is similar to the one in your video and was looking for some direction. Thank you very much for doing what you're doing. Its greatly appreciated.

@BayneCustomWoodworking 3 ай бұрын

Thank you. I am glad it was helpful

@chriskelvin248 9 ай бұрын

How I got along all of these years installing hinges and brackets without a set of self-centering pilot bits…smh. Essential set of kit.

@bexaminer1 6 ай бұрын

I bought a pair of Blum soft close hinges. I purchased the 105-degree hinges. They work fine. Those two hinges were $6.50 each. I just looked up the Berta hinges and found the same ones that I got from Blum and they're soooo much less expensive.

@BayneCustomWoodworking 6 ай бұрын

I like Blum but these from Berta have always worked well for me.

@guybowers9094 Жыл бұрын

Just came across this video and enjoyed it, so I subscribed so I could see more of what you do

@BayneCustomWoodworking Жыл бұрын

Thank you

@andyslagle5713 7 ай бұрын

Thanks, man! Exactly what I needed to see all the way through. Excellent content and presentation.

@BayneCustomWoodworking 7 ай бұрын

I am happy it helped and thank you

@NormMichaels Жыл бұрын

Very clear and concise, thank you for a great presentation.

@BayneCustomWoodworking Жыл бұрын

Thank you for the kind words

@Chriscam2you 4 ай бұрын

Awesome video, Roger! I appreciate your ‘no nonsense’, to the point narrative style. So many videographers over bake the dialogue and frustrate the viewer who is trying to apply the knowledge and wisdom to their own projects. Your script is clear, concise and easy to follow without leading away somewhere else. I’m embarking on building new kitchen cabinets with face mounted shaker style doors for our home this summer, so I’m gather resources and know how at the moment. I‘ve bookmarked your tools, jigs, and Berta hinges on amazon, and after watching your hinge mounting and door install I am feeling better prepared for the project. Thanks!

@BayneCustomWoodworking 4 ай бұрын

Chris - Thank you, I appreciate your comments. Enjoy the process and let me know how the job comes out. Keep moving forward.

@JoyForlifeat50 Жыл бұрын

CHIMING IN from Giles County TN.... glad I found ya on yt

@BayneCustomWoodworking Жыл бұрын

Me too

@danjustthinking1188 11 ай бұрын

Great help! I think if you use the jig for the plate holes. I think they will be square and you won’t need to mess with the level.

@BayneCustomWoodworking 11 ай бұрын

Its been a while since I did this video but I believe I used the jig for the screw holes. Without the level they can still get out of whack. The level makes sure they are all lined up with each other

@wpshelton 5 ай бұрын

I ordered the 1/2” hinges from your link. I believe the instructions say to use a 1/16” self centering drill bit for the screws. The self centering bit set you suggest does not sure contain this size of bit.

@BayneCustomWoodworking 5 ай бұрын

I just use the smallest one in the set

@luckehandyman Жыл бұрын

Thank you for the info, It was very helpful. Ray

@BayneCustomWoodworking Жыл бұрын

You are very welcome. I am glad you found it helpful

@Mr1965impala Жыл бұрын

We’ll done, thank you for sharing

@BayneCustomWoodworking Жыл бұрын

Thank you for watching

@diylife9118 Жыл бұрын

Great video! Keep them coming!

@BayneCustomWoodworking Жыл бұрын

Thank you

@BayneCustomWoodworking Жыл бұрын

Thank you

@laureschutze4239 6 ай бұрын

The self-centering bits linked are no longer available. What size specifically did you use for this Berta hinge? The instructions say to drill "1/16 (1.5mm) pilot hole". What standard-size self-centering bit do you recommend?

@BayneCustomWoodworking 6 ай бұрын

Sorry the bits are not available any longer. I appreciate you letting me know. I have updated the link to another set that will work as well. BOSCH CC2430 3-Piece Clic-Change 1/4 In. Self-Centering Drill Bit Assorted Set amzn.to/48X5HWV

@bexaminer1 6 ай бұрын

Thanks for getting back to me. I just spent a little time to figure out exactly what I need. It turns out that my cabinets are older and have the 3/8" lip. Apparently I need the concealed cup hinge for a lipped 3/8" cabinet door. Those seem to be fairly expensive. One place wants $47 a pair. I found a better deal at Hardware hut and they want $11.46 per hinge. For my project that I need 80 hinges. That's $916.80 for all of them. I would like to find them for less somewhere. Any ideas?

@BayneCustomWoodworking 6 ай бұрын

Have you tried brusso.com/

@bexaminer1 6 ай бұрын

I discovered that the frames on my cabinets are 3/4" thick. Do you know if there is a 105 degree hinge that will work on that frame?

@BayneCustomWoodworking 6 ай бұрын

The frames on all my cabinets are 3/4 and the Berta work great.

@gTcoughlin Жыл бұрын

Hello from Jackson Tn. 1st gotta say thats a beautiful cabinet you built! Have a question... I'm installing similar hinges a customer already purchased from "The Home Store" here. They're 'Hardware Resources 3390-R' (1/2 overlay compact cabinet hinge without dowels) they have 4 prongs on the cabinet side I assume to go around the frame? I've never used any like this & searching to find anything similar before i do any modifications to install them. They look very close to your hinges i couldnt tell if they had the 'prongs' i mentioned that these have? Due to the design of his existing cabinets the 'prongs' are a real pain in my... Lol why I'm tryin to find their exact purpose before i have him return them or do any modifications to the existing cabinets. Thank you for your time & great video!

@BayneCustomWoodworking Жыл бұрын

Oh ,an the bane of customer purchased materials! I have so been there. I am away from my shop for the next couple of days but I believe I know the prongs you are referring to. They wrap around the face frame to keep them from twisting I believe. I need to look at the ones I use now because honestly I can remember if they have the prongs or not. I return tomorrow evening and look at mine. Is there a special reason the customer provided them?

@bencox8716 7 ай бұрын

Hey new to Nashville and woodworking? Where do you buy your lumber? I went to mimms and it was great, looking for other great places too!

@BayneCustomWoodworking 7 ай бұрын

Welcome to Nashville -- Where did you move from? So Mimms is great with good choices. If you want Cedar, head to Grant Cedar mill about 45 minutes east of Mt Juliet where I am. My go to is Sparta Woodworks about 1 1/2 hour east of Mt Juliet but worth the savings in cost. 4/4 Hard Maple for 2.75 BF If you look at my website all the projects the past 3 years are built with Sparta wood.-- Fox Hardwood is about 1 1/2 east of Nashville and reasonable in prices as well. Feel free to email me at baynecustomwoodworking@gmail.com

@lymanmedeiros903 Жыл бұрын

For the Kreg jig, is the bit sized for the hinge? The bit comes with the jig?

@BayneCustomWoodworking Жыл бұрын

Yes I use the bit that comes with the jig. Seems to be a standard size. I have used it with multiple brand hinges and it works as expected

@susanshannon4355 7 ай бұрын

Hi Do you recommend the compact clip on for easier instalation?

@BayneCustomWoodworking 7 ай бұрын

If you are referring to the clip that attaches to the face frame, then yes. If I have frameless doors them I use a different style that attaches to the inside of the cabinet.

@y2kroxy Жыл бұрын

I bought some Ravinte face frame soft close hinges and am pleased with the adjustability except the adjustment that moves the door in out. I have about 1/8- 3/16 gap on the hinge side that I cannot close. I’ve never had this problem with the Euro hinges. Is this your experience with the Berta hinges?

@BayneCustomWoodworking Жыл бұрын

I really don't have an issue with the Berta's. I can tell you there is an 1/8" gap on the face frame hinges in my kitchen.

@ledheads 3 ай бұрын

The hinges in your link do not appear to be the same ones that you used in the video can you clarify?

@BayneCustomWoodworking 3 ай бұрын

The link points you to the same hinges I used. 1/2” soft close hinges for face frames

@ledheads 3 ай бұрын

@@BayneCustomWoodworking Sorry I comment on the wrong video.

@StephenTinius Жыл бұрын

For full-overlay doors on a cabinet with a face frame, should the reveal be the same on all four edges, especially the same on the top and bottom? Or, as I have seen in some examples, should the door be centered left and right, but have 0" (zero inches) reveal on the bottom edge? I am adjusting the doors on a cabinet over a microwave and I have some cabinets that are stacked, two and three high. I'm also considering a light rail. Thx,

@BayneCustomWoodworking Жыл бұрын

For my full overlay I have the same reveal on all 4 sides.

@flfbsphatboyblue8970 Жыл бұрын

How far out does the door sit from the frame with those hinges? I have read comments from people saying the door sits about 1/4” away or 1/4” gap.

@BayneCustomWoodworking Жыл бұрын

You will have an 1/8" to 1/4" gap depending on how you adjust them. I have never had an issue adjusting these hinges. Even on my cabinets in my house I have that type of gap.

@coldtimbercreations4083 3 ай бұрын

How much does the hinge side of the door sit off of the face?

@BayneCustomWoodworking 3 ай бұрын

usually about an 1/8 of an inch but you can adjust that.

@coldtimbercreations4083 3 ай бұрын

@@BayneCustomWoodworking Hey! Thanks for the speedy answer!!!

@chelseatemax Жыл бұрын

Practical

@BayneCustomWoodworking Жыл бұрын

Thank you

@gamerscircle Жыл бұрын

Can you post a link to the bessy clamps you were using?

@BayneCustomWoodworking Жыл бұрын

Andy - These are the Clutch Style 6 in. Capacity Bar Clamp with Wood Handle and I get mine either from amazon - amzn.to/3T4tSLN or from Home Depot - www.homedepot.com/p/BESSEY-Clutch-Style-6-in-Capacity-Bar-Clamp-with-Wood-Handle-and-2-1-2-in-Throat-Depth-GSCC2-506/204986132

@gamerscircle Жыл бұрын

@@BayneCustomWoodworking ty!!

@gamerscircle Жыл бұрын

@@BayneCustomWoodworking Thank you again, I just ordered 2 from Amazon, adding them to my collection. :)

@BayneCustomWoodworking Жыл бұрын

@@gamerscircle you are very welcome. Glad I could help