This is so confusing for most people

Рет қаралды 222,554

3 жыл бұрын

In this video I will show you how to install an inset cabinet door on frameless cabinets using inset hinges.
Find me on social media!
Website: www.bentswoodworking.com
Patreon: / bentswoodworking
Instagram: / bentswoodworking
Facebook: / bentswoodworking
Bent’s Woodworking is Sponsored By:
Harvey Woodworking - Go check out the Gyro Air G700 bit.ly/bwharveywoodworking
Bent's Woodworking is Proudly Partnered With:
Festool USA - See everything that Festool USA has to offer bit.ly/bwfestoolusa
Bessey Tool North America - The only clamps I use in my shop bit.ly/BesseyNA
Hartzell Hardwoods - Global suppliers of terrific hardwoods like walnut, oak, hickory, and ash. bit.ly/hartzellbw
Bent’s Woodworking Affiliates:
TSO Products - Some of the best woodworking accessories on the market tsoproducts.com?aff=5
Bits and Bits Company - Save 10% on your order with the code BENTS10
bit.ly/bitsbitsbw
Jay's Custom Creations - Shop Jays vast collection of plans and templates jayscustomcreations.com/produ...
Axiom Precision CNC Machines - See what Axiom has to offer www.axiomprecision.com/?acc=1...
Rubio Monocoat - See all the finish options Rubio Monocoat has to offer www.rubiomonocoatusa.com/#ben...
Affiliate links to items in this video below:
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Camera and Audio Equipment I Use:
Canon 90D - amzn.to/2Rl9vKM
Canon 10-18mm Lens - amzn.to/2Tk21dP
Rode Wireless Go - amzn.to/32yBzz4
Sigma 18-35 f1.8 Lens - amzn.to/2NEi2Ye
Neewer Monitor - amzn.to/2RuXket
Pergear Tripod Head - amzn.to/2sIkAgS
Neewer Monito Batteries - amzn.to/30GGnSz

Пікірлер: 179

@Sundardevsaha-e3k Ай бұрын

I so very much appreciate this video. So simply laid out. So thoughtful! Thank you. Thank you so much for not selling anything and for direct, exceptional teaching.

@bentswoodworking Ай бұрын

Glad it was helpful!

@erichagt6476 Жыл бұрын

This is hands down the clearest video showing inset door installation.

@MyGuyKirby 3 ай бұрын

5-Star rated video on the how to install these hinges!

@bkelevate 3 жыл бұрын

These are my favorite videos of yours that you do. You have such a great way of explaining things. Your cabinet basics video is still one of my favorite woodworking videos on KZfaq.

@WackyKayaky Жыл бұрын

I know this is an old video but I just started using these types of hinges and this video was perfect! Very clear and explained everything I needed to know perfectly!

@bentswoodworking Жыл бұрын

Glad it was helpful!

@Wyman642 2 жыл бұрын

Thanks so much. I am a beginner and have discovered the ease and quality of the Blum system. These videos clarify things tremendously and teach people like me what to look out for. Please keep the videos coming!

@randallsmith7885 Жыл бұрын

Thanks for a very clear, easy explanation of how to do this. I am building a garage storage cart that doubles as a work top for my wife's gardening work and I want to have inset cabinet doors and drawers, so this is perfect. Thank you!

@hythewoodworkdesigns 3 жыл бұрын

Well done Jason. I've never installed inset doors, only overlay. Now I have the confidence to do them for my workshop cabinets which I'm in the middle of changing.

@bentswoodworking 3 жыл бұрын

You will have to tell me how it goes 👍👍

@shockjock35 3 жыл бұрын

Great Video, Easy to understand even with the metric measurements lol. I’ve never built cabinets or hung doors before. I’m designing and building out my garage work shop for the first time. I love the inset door look. I imagine inset doors would keep dust from settling on top of the door if they were set outside the frame.

@hansangb 2 жыл бұрын

Great tutorial as usual! Those woodpecker Paolini squares are awesome. So versatile. And for those of you who try this w/o self centering drill bits, expect to be disappointed. Now matter how accurate you think you are free hand, you'll see the hinge jut to one side or another as you drive in the screw. That's called the OHNO Second. The split second before you realize you made a mistake and it's going to cost you! :) If you have to redrill, keep some wooden toothpicks around. You can glue the toothpick in to the defunct screw hole and try again. Also, most cheap hinges come with GARBAGE screws. Just throw out the pack and get some quality screws. It'll keep you from filling up your swear-jar! LOL.

@DerekTJ 4 ай бұрын

I've never built a cabinet nor its doors but your method of explaining gives me the confidence that I could do it.

@TaleOfTwoIdiots 2 жыл бұрын

After two failed attempts to install Soss hinges, this video was exactly what I needed to see. Thanks!

@bentswoodworking 2 жыл бұрын

Glad you found it helpful

@999mrkhaled 2 жыл бұрын

Finally someone using the correct measurement MM AND CM THANKS A LOT

@bentswoodworking 2 жыл бұрын

You’re welcome

@longdengzhang5935 Жыл бұрын

@@bentswoodworking p p 4:16 😅

@rezadaneshi 3 жыл бұрын

Great video. I’m a carpenter. I’d like to share why and how to install an 1.5 inch thick open slat door as an inset when the hinge market is geared to address 3/4 inch thick doors. 1st, the only way to address a thicker door for function, is recessed. Second, the hinge needs to be recessed in the door in exact placement and distance from the face of the door and cabinet as a 3/4 inch door would need it to be. A double recessed of sort. So a 1.5 inch thick door operating with inset or recess hinge has to have a recessed hinge from the back of the door, 3/4 inch further toward the front with modification so the neck of the hinge passes freely through the hinge side freely. This applies to the case when the face has the same profile open slat as the door for uniformity of the entire front of the cabinet including face and the door are uniformly open slat on the entire front of the cabinet. Just sharing and I’m not sure if I didn’t fumble my meaning.

@bentswoodworking 3 жыл бұрын

Thank you for sharing

@Coug1982 3 ай бұрын

Another great video Jason. I'm going to be installing these types of hinges for the first time and after your video, I'm confident that I know what I'm doing. Thanks so much.

@garynewton3979 2 жыл бұрын

Wonderful video! Simple and to the point. Thanks for sharing. I typically don’t use inset hinges so a quick refresher on measurements and process was perfect.

@bentswoodworking 2 жыл бұрын

Glad you found it helpful

@tallgirlswagg 4 ай бұрын

OMG. I'm not even 2 mins in and I've learned so much.....lol. Thank you. The title is what brought me to ur vid. Great job. Ok lemme finish.

@bentswoodworking 4 ай бұрын

Glad to hear

@electricalron 2 жыл бұрын

Fantastic Bent! Thank you fir all of your helpful info over the years. Hinges have always been my nemesis. Tomorrow we conquer the inset hinge!

@bentswoodworking 2 жыл бұрын

Hope it goes well for you

@barrydoxseyuk 9 ай бұрын

Great video, it's the small comments like the thickness of the door/to set back. I almost set mine back a standard depth when I realised my doors were 25mm thick. Well, you could say they would have stood out! When not fitting doors often, this is a good refresher course. ACE

@dragade101 Жыл бұрын

Thanks for providing the close up!

@mattbowers5342 3 жыл бұрын

Man I could have used this video a few weeks ago when installed my first pair of inset doors on a project for my wife. I ended up making my own template. I have 18 doors to mount in some new shop cabinets and will definitely recheck with what you have shared!

@bentswoodworking 3 жыл бұрын

Glad you found it helpful

@rw7532 3 жыл бұрын

That hinge mounting jig from Rockler is the way to go. Cost about $8.

@Spencerbuildsit 2 жыл бұрын

Well done Bent. Information is solid and the cadence and tone of your presentaion is solid as well. I've a bunch of older hinges of mixed brands that I want to consume for a garage project. Finding it very hard to find tab info and plate size choices. I'd like to see a video where one intentionally gets the tab wrong, the repercussions and solutions of doing so.

@bentswoodworking 2 жыл бұрын

That’s a great idea for a video

@t.e.1189 11 ай бұрын

I wish I would have known this. I had a small built-in cabinet I could have used these hinges on. I looked but couldn't find any. I assumed they didn't make any euro inset hinges. So I went with full overlay hinges. It came out nice but I would have preferred the inset ones. Thank you for sharing.

@JP-mq7pg 3 жыл бұрын

Good tutorial...well demonstrated. Using the metric system really simplifies the procedure/ installation.

@bentswoodworking 3 жыл бұрын

Glad you enjoyed it

@EwenMackenzie Жыл бұрын

This is perfect, and the title cannot be more accurate. Thank you sir

@displaychicken 2 жыл бұрын

As a Canadian I can easily switch between metric and imperial. I think of speed in kilometers/hour I think of height in Feet/inches I think of interior temperature in Fahrenheit I think of outdoor temperature in Celsius I encourage all woodworkers to start using the metric system for their projects. Switching to metric for woodworking increased my accuracy enormously. It also largely eliminated nearly all measuring errors for me. No more fractions, no more 3/32 of an inch. Metric woodworking is like easy-mode.

@MaritimeFox 2 жыл бұрын

I grew up in the UK in the 70's which is when the switch to metric started. The UK has never fully embraced metric so we now have a weird hybrid. I think in Miles per hour. I'll say someone is 6ft 2 inches but I'll measure my projects in metric. Temperatures used to be spoken of in Fahrenheit but now celsius is easier to understand. Fuel is offered in litres but car performance is still measured in miles per gallon. I think that is a deliberate smoke screen by car manufacturers and the government. For wood and metal work, metric is the only way to go. All those fractions are headache inducing. Much easier to say 60mm or 300mm. It's also easier when using computer design packages like photoshop, illustrator or affinity.

@Googaliemoogalie Жыл бұрын

I'm a Canadian engineer. Anything that needs precision is in metric. I've worked with american engineers that will never use the imperial system. When I woodwork, why would I want extra steps dealing with fractions?

@Rayblondie Жыл бұрын

I still think in miles per hour and human weight as stones and pounds. If someone says someone is 300 kgs I am lost. Yeah 6 ' 4" is great for height.

@Nissan300zxshowcar Жыл бұрын

Fantastic video!

@shnibbitz 2 ай бұрын

Thank you for this detailed video. This was extremely helpful.

@humbertogarcia7317 2 жыл бұрын

Thanks, great explanation and visual. You truly make it look doable!

@bentswoodworking Жыл бұрын

Glad you found it helpful

@johnisley4578 3 жыл бұрын

Another great vid sir. Extremely easy to understand for newcomers such as me. Cheers

@bentswoodworking 3 жыл бұрын

Glad you found it helpful

@Scotnish4U Жыл бұрын

very helpful, thanks for sharing

@johncstahnii6634 3 жыл бұрын

Nice informative video. A while back, say four years ago, I bought a bag full @ a garage sale, knowing someday I would build cabinets in my future shop. That was 2015. Now building the shop, found the bag with no idea how to accurately install them. Now I can Thanks

@bentswoodworking 3 жыл бұрын

Glad you found it helpful

@humbertogarcia7317 Жыл бұрын

Great job, I was able to set two doors on a TV cabinet. Thanks!!!!

@donniegaskill1836 3 жыл бұрын

Great instructions!!! Simple hinges to install.. Thanks.

@bentswoodworking 3 жыл бұрын

You’re welcome

@sstjacques 2 жыл бұрын

I have an old drexel dresser with these style hinges that are old and huge with a few broken ones and want to upgrade them to this style with soft close. Thanks for explaining this, need to make a jig now and a few test pieces.

@bentswoodworking 2 жыл бұрын

Glad you found it helpful

@martinmartin6117 Жыл бұрын

Thanks for the knowledge

@bretgreen5314 6 ай бұрын

Well done. Helpful lesson; thank you.

@JonDunnmusician 2 жыл бұрын

Awesome Jason

@Jaypark1113 2 жыл бұрын

Thank you for very precise imfo. It helped me a lot.

@bentswoodworking 2 жыл бұрын

Glad you found it helpful

@michael.knight Жыл бұрын

Great explanation. Have you ever used soft-close Blum hinges together with Tip On/Push to open? Seems like I should follow your steps, except have the hinge plate 2mm forward to allow for the Push to Open spring to be pressed.

@tlqmexicali5725 2 жыл бұрын

Excelend video, I was see many videos of this kind, but any with this clear instrucctions. Congrats continue with this great work. Regards

@bentswoodworking 2 жыл бұрын

Thank you. Glad you found it helpful

@steverochon1620 9 ай бұрын

Hey, just wanted to thank you for this and other videos about Blum hardware. While it's a quality product, the instructions are TERRIBLE, and the company is no help. neither is Woodcraft, who sold me these hinges. Their suggestion was to make a bunch of scraps to the exact size you need, then experiment. Like we have time for that! You got me through this with a minimum of sweat. Thank you!

@tonymendez8905 Жыл бұрын

Extremely helpful thank you!

@bentswoodworking Жыл бұрын

Glad it helped!

@andyboxish4436 2 жыл бұрын

Good stuff, thank you for the great video!

@bentswoodworking 2 жыл бұрын

You’re welcome

@donfritz8966 2 жыл бұрын

Nicely done.

@bentswoodworking 2 жыл бұрын

Thank you

@sapelesteve 3 жыл бұрын

Very interesting and informative video! Thanks for posting..... 👍👍👏👏😉😉

@bentswoodworking 3 жыл бұрын

You’re welcome

@JonathanPajakLensCulture 3 жыл бұрын

Thank you for this!

@bentswoodworking 3 жыл бұрын

You’re welcome

@jimrosson6702 11 ай бұрын

Great video thanks for sharing

@bentswoodworking 11 ай бұрын

Thanks for watching!

@akhtara.164 2 жыл бұрын

Thank you so much. My stress level about my project went from 1000 to about 50.

@bentswoodworking 2 жыл бұрын

Glad to hear it

@rodgerq 2 жыл бұрын

Just about to do my first set ever, in glad I've ordered a gauge. My doors will be inset on a faceframe but the faceframe hinge mounting plates are impossible to get in the UK so in going to just pack out the mounting surface flush with the faceframe edge and use normal inset hinges. That's the plan anyway 🤞

@bentswoodworking 2 жыл бұрын

Good luck 👍

@bwhite220 6 ай бұрын

Jason, thanks for this video! Huge help! Quick question: did you strike a line at 100mm on the cabinet and 98mm on the doors for the 2mm reveals? Thats the only part I’m still slightly confused on.

@garybadger325 3 жыл бұрын

Great video. Surprised that you did not use the LR32 system to drill the hinge holes. Keep the great stuff coming.

@bentswoodworking 3 жыл бұрын

Gotta show different ways 👍

@david1benson2jonas Жыл бұрын

perfect video, thanks so much.

@bentswoodworking Жыл бұрын

You're welcome!

@calvinwesley3822 10 ай бұрын

very effective video

@Kram2125 2 жыл бұрын

Thanks this really helped

@bentswoodworking 2 жыл бұрын

You’re welcome

@DellAnderson 2 жыл бұрын

So jealous of your tools which allow perfection! Never seen a drill press with a fence! BTw, I'd love to do everything in metric, but in America suppliers make everything in inches and it's not as easy to convert to fractions. Going to search for your video on how to make those cabinets. So clean and elegant looking.

@MrMaacin05 2 жыл бұрын

Clamp a straight edge to your drill press table… same thing. Second… he is an American… he’s actually active duty Army. Imperial to metric is easy. 1 inch is equal to 25.4mm. 1/2” therefore = 12.7mm. 3/8” is equal to .375” so multiple 25.4 x .375 which gives you 9.525mm.

@Rayblondie Жыл бұрын

I love Americans using the Imperial system still. They are more imperial than Britain. We have to use both because of the EU. I still think Imperial personally.

@dragade101 Жыл бұрын

Thank you for using metric!

@gabbymcgibson984 Жыл бұрын

I dont set my depth because Ive done this so long, now lets go redrill ever so slightly deeper

@mchristopher 2 жыл бұрын

Great tutorial! Question: with the 5mm tab that creates a 2mm reveal. How adjustable is that with the blue 110 clip top inset hinges? It’s unfortunate that they cant adjust how much the hinge closes so that it doesn’t need that stop glued onto the top or bottom of the cabinet. I realize there is a lot going on in a small space, but at least they could make it stop at 90 degrees to the mounting plate.

@theburnetts 2 жыл бұрын

Fantastic video. Thank you so much. I am working on a cabinet that will have doors with glass. Ideally the door frame will be only 1" wide all the way around. Is it possible to find inset hinges that would work with a door frame that is only 1" wide? I am talking about the place on the door where you have to use the drill press to drill the hole that the hinge sits in. All of the inset hinges that I have seen are larger than that. I was wondering if they even make them small enough to work with a door frame that is only 1" wide. Do you know?

@wills2953 Жыл бұрын

amazing

@itsbrittjohnson 2 жыл бұрын

thank you so much!!!

@bentswoodworking 2 жыл бұрын

You’re welcome

@levisoriano1 3 жыл бұрын

Awesome video. Do you think you could do another video of the other hinges you were talking about thanks.

@bentswoodworking 3 жыл бұрын

I do have another video about them. It’s one of my older ones. It’s also linked in the top right corner of the video when I mention it

@marcosromero9359 Жыл бұрын

Thanks

@mithuhossain9198 Жыл бұрын

Thanks,　good job 👍👍👍👍👍👍

@shuilong52 Ай бұрын

Hi appreciate your advice so I have to made adjustment for the thickness of the door?

@philipadcock3508 Жыл бұрын

Please make a video of how to install inset cabinet doors with a face frame. PlEaSe!!

@daniellazylen5350 Жыл бұрын

What do you do for very thick doors ? We had to put some spacer underneath the base because the door was rubbing on the side wall of the cabinet where the hinges bases are, even at maximum possible setting on the hinge adjustment. There was not enough adjustment to move it away from the cabinet wall. It looks like these hinges are made for standard door thickness and anything very thick like solid wood does not fit.

@danieldurkton2942 Жыл бұрын

Hi Bent, Great video very informative. Quick question what model number of Blum hinge are you using?

@NEVERDONE 11 ай бұрын

Thanks so much for the clear explanation. I need to get some of those hinges, can you recommend one?

@tundrawhisperer4821 Жыл бұрын

When does the use of a third hinge come into play, as it relates to the door height? I’m sure weight and width are factored in. But I have some frameless cabinets that will have full overlay doors that are 18” wide, made of 3/4” thick CVG Fir plywood. Should I use three hinges?

@atb2manboberconsulting744 Жыл бұрын

Excellent instructional video (dare I say as usual.) Question: Are you using a 35mm forstner bit or a 1 3/8” bit? I’m guessing the former. Also the little Rockler jig for inset portion, What is it? Thank you so much. Please keep teaching.

@timcsport Жыл бұрын

What would you recommend using for a stop in the kitchen for cabinet doors? I’m switching from overlay to inset doors and there is no stop.

@sparks6666 3 жыл бұрын

Extremely informative video. Thanks. So the same euro hinges can be used for either full frame or inset right? All that differs is the setback for the inside piece.

@bentswoodworking 3 жыл бұрын

A framed cabinet would be different hinges but can still be euro style

@grousgrek6560 2 жыл бұрын

Jason great video I’ve been putting concealed soft close hinges in my kitchen cabinets do you know a good hinge that doesn’t leave such a large gap at the back (space between the cabinet and back lip

@bentswoodworking 2 жыл бұрын

I pretty much only use Blum

@EmpoweredPercussion 2 жыл бұрын

So I have inset hinges but they look very different from those. They're sort of the older style hinge where you put the 2 screws on the exterior of the face frame. When I bought these I thought they were kind of a regular hinge and I liked it because them do to the spring tension. I thought that would help it stay closed etc. The challeng is that I built a maple frame on my cabinets and I was thinking of using a 5/8 Maple framed doors with 1/2 dadoed Birch on the inside. I think I might have to mill it down to size to make it flush with the frame which looks like the door should be roughly 1/4th thick, seems to skinny of a door? Sorry this is sort of hard to explain without seeing these hinges.🤷🏽‍♂️ I might return them. Okay I think I found what I need to do. Looks like I need to cut a data to make these fit properly. Scroll to about 11 minutes in and she explains it pretty clearly. I think I got this. Hope this helped someone and greet video brother! kzfaq.info/get/bejne/pNF4qcqFrcWzmmg.html

@LT212-24 11 ай бұрын

What is the depth you need to drill for the hinge? I was thinking about doing this with 18mm MDF but concerned it won’t be thick enough

@bijan4727 2 ай бұрын

Hello. I really enjoyed your well elucidated and informative presentation. I understood everything except when you said I have to deduct 2mm from 100mm for locating the hinge. You also said because we need 2mm gap for the top. I do not see the logic between the location of the hinge and the gap above. Please explain. Next question. Can I use that hinge for other than inset cases ? I appreciate in advance for your expert opinion.

@Loljjkb 7 ай бұрын

I’m not American. One time when I was flying there was this lady sitting behind me asked how long was 4cm. She said her daughter had surgery and the doctor told her the incision was 4cm. I drew it for her on a piece of paper. The rest of the world is using the metrics system just fine and it’s super simple and easy. Why are Americans using this weird “three quarters of an inch,” “11th sixteen and an eight quarter inch foot bluh bluh bluh” People are not confused by the door hinges. People are stuck with weird measurements and it’s confusing everybody. Metrics system is so easy; 1cm equals 10mm. That’s it. You don’t have to do fractions omg 😱

@vicenteromo6484 11 ай бұрын

What's the drill bit called, the one that makes the hole? Also, Can it be bought as a bit for a regular drill or router?

@nathansilver9190 2 жыл бұрын

Excellent video. Question: Do you subtract another half mil or so if you edge band the doors? Thanks, I really enjoy your videos.

@bentswoodworking 2 жыл бұрын

I would adjust if edge banding however I would do a hardwood shaker door so it wouldn’t be necessary

@72fishey Жыл бұрын

I am just trying to find a replacement hinge for framed inset cabinets. 9 years old. It seems impossible. Been trying to find some for months. The hinge company no longer makes them.

@philmason8414 2 жыл бұрын

Great stuff here! Is that jig for any particular brand of inset hinge? I am going to use Blum and want to make sure.

@bentswoodworking 2 жыл бұрын

Any that have the same specifications

@akesq01 4 ай бұрын

How do you calculate how far back to install the hinge plate on your cabinet?

@derekrobertson1548 3 жыл бұрын

Hi Jason, I am looking at making some cabinets with a face frame but also having the doors inset into the face frame. Is this something you have tried before, if so what hinges did you use. Cheers Derek.

@bentswoodworking 3 жыл бұрын

There are many options but this is just one example www.rockler.com/blum-120-inset-clip-top-3-way-face-frame-hinges?country=US&sid=V91040&promo=shopping&PL&gclid=Cj0KCQjwh_eFBhDZARIsALHjIKeZCPx__LdB9Aow7zapBxDWeYEOjPhr2gecLMqNOrp1AACuYeAxFLAaAgTSEALw_wcB

@bigwillysgarage2301 3 жыл бұрын

Video a lil dark jay need more lights lol nice video

@bentswoodworking 3 жыл бұрын

Yeah it’s a weird spot to film

@elizabethlee6077 2 жыл бұрын

So if I wanted to actually recess my door a little bit, would I have to get a hinge that would include the extra space. For example if my door was .75 in but I wanted it recesses another .25 -.5 would I actually need a hinge made for 1 - 1.25 inch. Sorry if this is a dumb question

@bentswoodworking 2 жыл бұрын

Technically yes but you would have to see how the door opens cause that could cause issues sonar it is recessed

@cenzosenerchia3043 2 ай бұрын

what if the door is 1/2 in, whats the depth of the hinge inset on the door

@Zamboni-0805 2 жыл бұрын

Thanks for sharing. Could the stop be put on top so doesn't get in the way...and lot less noticeable?

@bentswoodworking 2 жыл бұрын

It could yes

@manoelanjos 2 жыл бұрын

Hi, great video, exremely helpfull, lease can you give me the part # of the jig hinge plate template by rocrler

@MattLitkeRacing Жыл бұрын

I probably should have watched this before I did it wrong the first time

@bentswoodworking Жыл бұрын

Well now you know. 👍

@Bluesidian 2 жыл бұрын

He doesn't show his face cause he's reading the script ,he put together, with all the math he did beforehand LOL.

@warrensmith2902 Жыл бұрын

I like to leave abou an inch or so at the back of the carcass after the drawers are sized in case something falls down the back and jams the drawer. You then have room to try and un jam the drawer. Don't ask me how I know.

@stevenbruce2362 2 жыл бұрын

Awesome video! What kind of pulls were used?

@bentswoodworking 2 жыл бұрын

Don’t know the exact name but I got them from Menards

@stevenbruce2362 2 жыл бұрын

@@bentswoodworkingGotcha, thank you

@veej8534 2 жыл бұрын

What is the part number for this hinge?

@mughalmughal6693 11 ай бұрын

Hi...I have a kitchen door...door 3:5 centimeters thinkness...plz tell me hinge? inside door

@bobfloyd875 2 жыл бұрын

Please tell me what size hole that has to befor the door ?

@vanilla50 2 жыл бұрын

I have to replace my self centering bit, have you found a quality one other than Festool? Thanks in advance. I could not find a name by searching your channel.

@bentswoodworking 2 жыл бұрын

I have the Rockler Insty-drive bits and they work well