I got a PowerPint a couple days ago, and I love it!!! I'm not an electrician or construction worker, so I don't need a multitool with every tool known to man. I just need something to grip with, open bottles and cans, and turn screws. It's about the same size as a 3-layer swiss army knife, so it is totally fine in the front pocket of shorts or pants. I'm glad to see it will hold up to prolonged use. 👍
@edcgearpocketknife7 ай бұрын
I carry a full size multi tool the Leatherman rebar. And I carry the SOG PowerPoint for pocket carry for the smaller jobs.
@glenstribling61236 ай бұрын
Great video. Thanks.
@leegliarmis80592 жыл бұрын
I found some tiny magnets on Amazon and glued them to the insides of the handles to keep them closed small enough that they do not affect the grip you’ll have on bits you place into the top
@MustaLaatta Жыл бұрын
same solution, tiny magnet on the other side👌
@marsbase37299 ай бұрын
good tip, otherwise I would get a little belt sheath for it.
@TheInchii8 ай бұрын
Do you mind sharing what kind of magnet did you put in? 5x2? Or thicker
@edcgearpocketknife7 ай бұрын
Do you have a links to the magnets 🧲
@marsbase37299 ай бұрын
awesome review, I also like to use Altoids tins for driver bit, screws, bolts, nuts or any number of small things.
@davidkurle54182 жыл бұрын
Great video, buddy. I hope you have an awesome weekend!
@JohnnyJuke2 жыл бұрын
You too David!
@nicolanicola10672 жыл бұрын
Good! Very Good!
@mikeredhead28948 ай бұрын
Good informative video bro. I love my powerpint after about 18 minths, its good as new and fun as you described, does the trick on the go. I also have a beautiful Surge, which is the biggest baddest MT basically. I love them both equally, both serve me well small or medium task but i can never decide which guy to be, the smart fast effiecient one, or the big beast. Hahaha.
@latetodagame18928 ай бұрын
Women often tell me they want the beast
@TheGrenadier9711 ай бұрын
I have the SOG Flash MT and althugh i'm perpetually biased to Victorinox, i like what SOG offers. PowerPint is probably next. Glad to know that the screws are T8.
@alexsoul247 Жыл бұрын
Thanks Johnny, I was looking for a decent pocket knife with pliers and scissor that is small enough to use as EDC. Looks like this is going to be perfect fit. Ordered my one. Thanks a million for great review
@JohnnyJuke Жыл бұрын
My most used MT.
@joshrayner716710 ай бұрын
Any thoughts on it?
@MeZillch2 жыл бұрын
It's hard to adjust the tightness of the opening, using two T-8s or whatever they are, such that you get a nice stiffness to prevent accidental opening YET you still have easy flip open action (or I think you called it "fidget factor"). Maybe you'll have better luck than me. Thanks for uploading. Oh, also, one guy placed a thin button shaped neodymium magnet down by the lanyard end to keep the handles together (also handy for bit driving action so you can let go and rotate your hand) and reported good closure, but I haven't tried that myself because I avoid strong magnets on my pocket use tools because they can zap magnetic strips on nearby credit cards.
@JohnnyJuke2 жыл бұрын
So nice to hear from you. I will look into the magnet mod for sure. Thanks!
@TheInchii8 ай бұрын
@@JohnnyJukeHey, did you maybe mod it with magnet? I have Daicamping DL30 the clone of surge and I think I got sick for multitools and I am already thinking about getting something smaller that I can keep on my pocket or jacket and was thinking about getting this SOG PowerPoint did you maybe tried also other SOG from those mini tools and could say which one you think is the most universal? I will be ordering from AliExpress. Thank you love the channel you got new subscriber 😅
@Rich_EDC Жыл бұрын
just got mine and love it but it's really tough I can't swing open does it loosen over time? I used my friends and it was like butter one handed swing opens
@JohnnyJuke Жыл бұрын
Loosens up
@yuridaman Жыл бұрын
Does anybody here know where I can get replacement torx screws from? I got no reply from sog
@NT4XT Жыл бұрын
How where to obtain the "mod" flat head?
@ACID-ls7cv2 жыл бұрын
Hello,i have a question if you can respond..can i attach a 1/4 driver to a sog powerpint?
@JohnnyJuke2 жыл бұрын
Yes
@davidnagore725 Жыл бұрын
A few thoughts/questions: 1) Has anyone used the protractor on the pliers? How practical and accurate is it? 2) In my humble opinion "first impression" videos are little more than ad hoc commercials. Reviews after the tool has been used for a while like this one have so much more credibility. 3) I don't own any SOG products, and based on what I've heard the PowerPint, while not perfect, is the shining exception to its bigger brothers. Why? Where's the disconnect?
@emersonflestado183111 ай бұрын
No.3 is what Im seeing too in reviews. Waiting for any reply
@seanrobinson64079 ай бұрын
Because the leverage gear system works well on a small tool, but on a full size the handles spread out alot.
@mikeborrelli193 Жыл бұрын
Where did you get that beautiful satin blade Recon 1? who has them and how do I contact them? Been wishing for a non DLC Recon for a long time.
@JohnnyJuke Жыл бұрын
These were exclusives from a few years ago. Unlikely you will find new ones, but anything is possible.
@hdryden7652 Жыл бұрын
Great video but I don't see the amazon link, did I miss something?
@JohnnyJuke Жыл бұрын
Sorry, but The Amazon thing is done.
@sparky0288 Жыл бұрын
link not working
@sigurdhelgesen9990 Жыл бұрын
Ok i know I'm sixteen but i had to laugh when you said nut driver
@derekquinones8614 Жыл бұрын
I can’t make my mind up between the black one or the silver one any suggestions?
@JohnnyJuke Жыл бұрын
You won't be disappointed with either one.
@derekquinones8614 Жыл бұрын
@@JohnnyJuke does the black one look like crap after if it starts having the black coating come off is what I meant to ask?
@dissy5563 Жыл бұрын
Get both is usually the correct answer.
@michaeloconnor4204 Жыл бұрын
Where did you get the fuller sized flathead?
@JohnnyJuke Жыл бұрын
Made it
@lucasathus Жыл бұрын
Sorry about the silly question It's about that problem you said you have that it opens easily in your front pocket Have you tried using a micro magnet? Maybe that helps?
@JohnnyJuke Жыл бұрын
I tightened the pivot screws and all is well.
@TheInchii8 ай бұрын
@@JohnnyJukeafter tightening it are you still able to open the tool 1h or now need to use 2hands?
@jessehughes3741 Жыл бұрын
Did you have to break it in to open it like that mine is super tight
@JohnnyJuke Жыл бұрын
The bolts loosened. I have since tightened them.
@ff-mu6cc2 жыл бұрын
cool!
@insanogeddon Жыл бұрын
AT last everyone else is coming round!
@wesrundle63262 жыл бұрын
What is the model of that buck knife?
@JohnnyJuke2 жыл бұрын
Buck 112 Pro Elite
@Adis09 Жыл бұрын
I have a leatherman wave plus and I’m not using it for tough jobs and I’m also not a heavy user of it. Is it better to have a sog powerpint instead? Or should I keep both of them?😂
@JohnnyJuke Жыл бұрын
I carry a Wave plus daily. Having said that, the PP lives on my work bench. The PP gets the most use. I own both because I have a collection, but if I could only have one (between these two) it would be the Wave.
@Adis09 Жыл бұрын
@@JohnnyJuke thank you for the fast response and I’ll just keep both of them 😆
@pathfinder_strider3 ай бұрын
By the way, have you experienced any rust problems in your sog?
@JohnnyJuke3 ай бұрын
None
@pathfinder_strider3 ай бұрын
@@JohnnyJuke Thank you for replying! Mine is having rust spots way to often, perhaps I got unlucky.
@max.m6673 Жыл бұрын
What’s that small silver knive on your table? Is it a buck? Maximilian😅
@JohnnyJuke Жыл бұрын
Buck 112
@jmoman5356 Жыл бұрын
“..why the lock is so crappy and the company won’t reply to your emails” (stares at camera out of view {while holding a benchmade, no their service is perfect. If you send a knife that scrapes the handle closing they send it back the same for sentimental reasons}) 🤨
@capttwitch Жыл бұрын
Buck :/ I've been having some real shit luck with that company in the past years....... 🙄. Used em my whole life then, I bought the new premium moose skinner blade snapped because you could clearly see it was bad heat treat... Sent it in they said srry can't replace it, that was almost a year ago and they still haven't shipped my crap back 😡. Their grinds are really off in the past cpl of years... Kinda sucks imo
@JohnnyJuke Жыл бұрын
I really was disappointed with the 112/110 Sport. First Bucks I ever sent back.
@capttwitch Жыл бұрын
@@JohnnyJuke damn eh :/ they completely stopped shipping their folders to Canada to wich blows.. I picked uo the sprint ops buck of the month, that wasn't bad I like it aside from when you flio it and close it it litteraly sounds like everything is loose on it but it's tight lmao 🤦🤷 I did wanna check out the 110 auto and the newer ones but we'll see I guess lol
@MrZachzippo11 ай бұрын
where is you influencer page
@JohnnyJuke11 ай бұрын
Deleted it.
@StarDarkAshes Жыл бұрын
I have known some women who need to be cleaned, maintained, and lubed.
@JohnnyJuke Жыл бұрын
lol!
@gearstuffs8007 Жыл бұрын
Is this made in China?
@JohnnyJuke Жыл бұрын
Just came from their site. Couldn't find where they are made.
@gearstuffs8007 Жыл бұрын
@@JohnnyJuke from China, saw this info fr Amazon!
@ryandelehanty8368 Жыл бұрын
benchmade sucks! still love my 940 #sad
@tizben Жыл бұрын
So sad, but true. I had to upgrade my 940 with aftermarket. Love it now
@JK-uu8zm2 жыл бұрын
The pliers break and they don't have replacement
@SonoraSlinger Жыл бұрын
I have carved far worse animals tbh
@bpax8989 Жыл бұрын
How did you modify your bottle opener to a flat head