Soldering a Ring: Using Butt, Sweat and Tee Soldering Techniques.

  Рет қаралды 7,005

Nancy Hamilton

Nancy Hamilton

4 жыл бұрын

Improve your soldering skills or learn new ones. In this video, I cover the three basic forms of soldering: Butt, Sweat and Tee soldering. Learn the steps for successful soldering and many insider tips to ensure your success. Learn to troubleshoot soldering problems. As a bonus, I'll show you how to fix your cross lock tweezers.
Also, learn why fit, cleanliness, and heat are so important for soldering success. Discover methods for creating a good fit and how to control solder flow without melting your metal!
If you like what you see please subscribe and like this video! Thank you for watching!
For more information, check out my webpage on using the miter cutting vise, here, on my website: nancylthamilton.com/resources....
Also, learn more about soldering, on my page: Soldering 101. nancylthamilton.com/technique... There is a ton of information available to help you become an expert!
For additional videos that relate to this one please see my soldering playlist: • Soldering
Also, check out my video on how to make a bezel: • How to make a bezel an... .
Tools and materials used in this video
Miter cutting vise: amzn.to/34XiHez. My favorite miter cutting vise and jig is the one made in France an available at Rio Grande Jewelry.
Batterns Self-Pickling Flux: amzn.to/34XEoLi
Decorating wheel (solder block sits on it, allowing you to move your work while soldering): amzn.to/2LFcRXC
Hard, medium and easy solder: amzn.to/2O9kbfx
Cross lock tweezers: amzn.to/2OaSZgw
3M Tri-M-Ite Polishing Papers: amzn.to/30xderk
These are affiliate links. By purchasing via these links, you help to support these free videos and my ad-free website, filled with jewelry making information. The affiliate links are also via Smile Amazon which helps a charity of my choice so, it's a win-win and all you have to do is shop! www.chimeraarts.org is my charity which supports our community-based jewelry studio and makerspace.
Visit Nancy.LT.Hamilton.com for more information.
Don't forget to Subscribe and Share! Thank you.

Пікірлер: 23
@tomt9543
@tomt9543 3 жыл бұрын
Butt Sweat & Tee. I remember them from the 70’s!
@ragazzinayankee
@ragazzinayankee 4 жыл бұрын
Thank You soooooo much!!! I'm super happy to see your videos again!!!
@crystalfabulous
@crystalfabulous 4 жыл бұрын
Thank you Nancy you’re the most wonderful teacher
@ricardorezende1968
@ricardorezende1968 4 жыл бұрын
Me and my wife Marcia are fans of your work
@larryrichards3668
@larryrichards3668 2 жыл бұрын
Thank you Nancy, your videos are very helpful and entertaining.
@Dan-ji4db
@Dan-ji4db 4 жыл бұрын
Welcome back, i was wondering where you been 😁 Love your vids
@susanhardy6787
@susanhardy6787 4 жыл бұрын
Thanks so much, Nancy! I learn so much from your videos!
@gerryannb25brown43
@gerryannb25brown43 4 жыл бұрын
Thanks Nancy, I used to watch your videos along time ago when I was first try to learn how to saw, I got so frustrated braking saw blade That I didn't touch it for a couple years, but am giving it another try. I went to your website and did the little whale tail project and actually got it finished :) now i think i am going to make smaller ones for earrings. Thanks so much for video, you are so talented and the body cam works great.
@samuellaramsey5963
@samuellaramsey5963 3 жыл бұрын
Great video! I especially needed the end of it on how to fix locking tweezers! Thank you!
@stephaniesummers67
@stephaniesummers67 4 жыл бұрын
Thank you thank you thank you! this video helps a lot. I appreciate all of your work. you know you are my top mentor!
@andreak001
@andreak001 3 жыл бұрын
So helpful to me- you really explain everything on a lay woman's level! Thank you. (Now let's see if I can do it, lol!)
@vlrissolo
@vlrissolo 4 жыл бұрын
THANK YOU NANCY! I learned a lot! I started making silver jewelry simply by watching YT video's! You have been one of my greatest teachers and also you are inspiring....I am pulling cat hair out of my eyelashes as I type. btw, why are middle age women with cats called "old cat ladies"? The guys live a long time! At 30 yrs. old with a kitten, we are simply cat lovers, but when those kittens are around 20 (even 15 yrs. old) we are then referred to as "old cat ladies" WTH?...this just occurred to me! lol!!!
@ricardorezende1968
@ricardorezende1968 4 жыл бұрын
Hello Nancy ... My name is Ricardo ... São Paulo - Brazil 👍😉
@CharlesStruble
@CharlesStruble 4 жыл бұрын
Oh, THAT kind of butt... (Thanks Nanc!)
@LarryDallas
@LarryDallas 4 жыл бұрын
Great video as always Nancy! I have a question about the tee soldering, what keeps the pieces from falling over? I could understand if you had used 2 third hands! Thanks for sharing your knowledge!
@aliceharvey3019
@aliceharvey3019 4 жыл бұрын
Larry, around 11 minutes into the video she says she cut slots in the pieces and then fit them together.
@aliceharvey3019
@aliceharvey3019 4 жыл бұрын
Actually she doesn't "say" it, it is in writing, but that's the trick.
@LarryDallas
@LarryDallas 4 жыл бұрын
@@aliceharvey3019 I appreciate you for letting me know about the slots in the material.
@HeathersTreasures
@HeathersTreasures 4 жыл бұрын
Good thing you put a comma after butt. LOL!
@ginted7301
@ginted7301 4 жыл бұрын
Butt, Sweat & Tears
@suelynpeters1728
@suelynpeters1728 4 жыл бұрын
I the first solder (tee); how did you get the solder to adhere to the metal up high like that...off the charcoal block? Gravity dictates it should fall, so I’m guessing you have a method to keep it up there.
@Nanamema
@Nanamema 4 жыл бұрын
SuElyn Peters I believe the flux was what’s holding the solder to the piece
@kathryncastanares525
@kathryncastanares525 4 жыл бұрын
She cut slots to fit them together and have a better hold.
Finding Center and Creating Precision Edges on Metal
14:56
Nancy Hamilton
Рет қаралды 3,8 М.
How To Solder A Tube or Bezel Setting Onto A Ring And Do It Correctly
23:13
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Savage Vlogs
Рет қаралды 9 МЛН
UNO!
00:18
БРУНО
Рет қаралды 1,6 МЛН
Jewelry Making Techniques:  Easy to MakeTubing
49:48
Nancy Hamilton
Рет қаралды 28 М.
5,760 HOURS OF WORK!? - The Process of Making Japanese Traditional Tatami.
30:03
Craftsmanship Process - SUIGENKYO
Рет қаралды 30 М.
Many Moving Magnets Melting Metal
20:21
Cody'sLab
Рет қаралды 2,9 МЛН
The Split-Shank Ring
20:22
Nancy Hamilton
Рет қаралды 10 М.
Damascus Steel From Milling Chips!
15:47
Alec Steele
Рет қаралды 1,3 МЛН
Soldering Jewelry - Sweat, Flush, or Applique Soldering
16:14
Nancy Hamilton
Рет қаралды 101 М.
Eloá fazendo graça kkkk
0:15
Story Elis e Eloá
Рет қаралды 26 МЛН
Gym lover..#trollface #short #shortsfeed
0:21
DS SIPUN OFFICIAL
Рет қаралды 6 МЛН
World’s Largest Jello Pool
1:00
Mark Rober
Рет қаралды 101 МЛН
Giant balloon🤪 Subscribe to me👋🏻
0:27
Nazar S
Рет қаралды 8 МЛН
Small Act of Kindness is also a charity
1:00
PainCare _Trust
Рет қаралды 48 МЛН