Soldering and Replacing a Radiator: DIY Tips and Tricks

Рет қаралды 3,061

Жыл бұрын

#diyenthusiast #office_boy_builder #soldering #replacing
In this video, we'll guide you through the process of replacing a radiator and soldering the pipes. We'll show you step-by-step how to remove the old radiator, prepare the pipes for soldering, and install the new one. Whether you're looking to update your home's heating system or just want to learn a new DIY skill, this video is for you!
Please consider supporting me on Patreon, for exclusive early access to my content (ad-free), as well as a kick-ass community where we can exchange ideas, thoughts, support, and advice!
patreon.com/obb?...
Here is the kit I use:
Bosch Professional Combi Drill and Impact Driver with Two 18V 4.0 Ah Batteries amzn.to/3wZ9n9u
Bosch Professional 18V Cordless Circular Saw with 2 x 18 V 5.0 Ah Batteries
amzn.to/3BmwfCC
Bosch Professional 18V Cordless Multi-Cutter with 2 x 18 V 5 Ah Batteries and 16 Accessories
amzn.to/3TIDs77
Bosch Professional 18V Cordless Jigsaw with 2 x 18 V 5.0 Ah Batteries
amzn.to/3BjQ4u4
Bosch Professional GAS 35 M AFC Wet/Dry Extractor
amzn.to/3BmSOXS
Bosch Professional GMF 1600 CE Corded 240V Multi-Function Router
amzn.to/3cRh0rE
Occidental Leather 5089 LG Seven Bag Framer Tool Belt
amzn.to/3x3JzJs
Occidental Leather 5595 Beltless Retro Package
amzn.to/3KT6ZqA
Hikoki (Hitachi) NR1890DBCL/JP Cordless First Fix Framing Nailer, 18 V, Multi-Colour, 2 x 18V 5.0Ah Li-ion Batteries
amzn.to/3cR0nwu
Bosch Table Saw & leg stand
amzn.to/3ATz4JF
Damp Proof Membrane
amzn.to/3cTKDIY
18mm Chipboard Flooring
amzn.to/3KUhARZ
Please join us and Like and Subscribe @OfficeBoyBuilder for the full video and more content.
#DIY #radiators #plumbing #soldering #homeimprovement #heating #tutorial #DIYenthusiast #handyman

Пікірлер: 44

@samhedges9714 Жыл бұрын

Jointing compound on the olive. Keep one of the pipes in the same position, take the floor boards up and alter the one underneath to the TRV or lockshield. PTFE last resort on a compression fitting if its leaking, it can save you. Solder once all fittings are fluxed and copper is in place, avoid doing bits separately. Well done though for a first go.

@OfficeBoyBuilder Жыл бұрын

Great advice mate, thanks!

@Tom_Prendiville Жыл бұрын

Your comment section is going to go wild with the amount of elbows planned to be used 🤣 I'd have moved the pipes in the floors to keep a straight through look but each to their own. Great job man 👍🏼

@OfficeBoyBuilder Жыл бұрын

Yeah that would have been a good way round too. I didn't want to rip back all the carpets etc.

@Sparks6078 Жыл бұрын

I finished replumbing my house part way through the year, after starting it when I did the bathroom during the first covi lockdown. I had never soldered before that. I even piped up the new cylinder and oil boiler (got someone in to commission it though). Saved myself a nice chunk of money doing it as well. Extension to do at somepoint next. I'm lucky my stepson is a brickie and I'm a sparky, so we should be able to cover most of it between us.

@OfficeBoyBuilder Жыл бұрын

Amazing! That's awesome, great work mate 💪👍

@karleck1119 Жыл бұрын

Great video

@michaelplays2449 Жыл бұрын

Great job !!

@OfficeBoyBuilder Жыл бұрын

Cheers bud!

@normanboyes4983 Жыл бұрын

Well done. However, if you have suspended floors with the feeds and returns under the floor - it is better to bite the bullet and cut back and run a custom piece (with a slow bend) to hit the rad tail in one run.😉

@stuartjones2242 Жыл бұрын

the radiator pipe work look good mate, a good days work 😊😊👍👍

@OfficeBoyBuilder Жыл бұрын

Cheers!

@peterhaigh5764 Жыл бұрын

That rads a beast in the hallway. Great your having a go!

@OfficeBoyBuilder Жыл бұрын

Yeah it's great! Really feels warm now, all up through the upstairs too which is handy because there isn't space for a rad on that hallway

@Transformityourself Жыл бұрын

How you doing fella ? Not seen you on here for a while. Guessing your super busy with work or the money dried up haha. I am proper into my build now with some real juicy demo videos being uploaded. I stripped the roof off the bungalow and am almost ready for the big steels ! Exciting stuff. Take care. See you soon.

@OfficeBoyBuilder Жыл бұрын

Hey mate, it's a bit of both! We're on a mission to save cash for the next sprint, and I'm busy at work trying to make that possible. I'm tinkering away in the background but not doing enough to warrant filming. Hopefully I'll have some bits out soon 🤞 Glad to hear yours is coming along well. I'll check it out!

@ck8nn8dy52 7 ай бұрын

Good job, can't beat a nice new radiator. I need to get myself a soldering kit. Doesn't seem that complicated. I have been using push fittings with copper pipe. Quicker, but I'm not sure of the longevity 😂.

@OfficeBoyBuilder 7 ай бұрын

With Yorkshire fittings, soldering is a doddle. They're more expensive, but still cheaper than a plumber 🤣💪

@jimh4072 Жыл бұрын

I did this in my last house. I replaced all pipework and radiators (apart the two newest that were only a year old) I saved a fortune and got exactly the radiator size I wanted as well as getting rid of a maze of old junk pipework that was reused from earlier systems going back to 1989. I was never trained in plumbing, I read a lot, watched YT videos then took a week off work to practise in my backyard, I bought the soldering gear, pipes and different fittings and spent the week cutting, bending and soldering pipe. I done some of the underfloor pipes with Speedfit pipe and fittings. I never touched the gas boiler, I got a plumber to connect it all up. There was only one small leak were I forgot to tighten a nut. I sold the house a month ago and the surveyor found no problems.

@OfficeBoyBuilder Жыл бұрын

Legend! That's amazing mate. Great work!

@brianedwards7958 Жыл бұрын

Excellent

@brianedwards7958 Жыл бұрын

Your channel has been an inspiration to me. Keep them coming.

@OfficeBoyBuilder Жыл бұрын

Thanks mate! Hoping to keep it going for as long as I have stuff to do around the house (and money to pay for the work!🤣🤞💪)

@Jackzuk Жыл бұрын

Quite brave diving straight into soldering, i went for the Yorkshire fittings on my 1st attempt at doing it. If u get any leaks by the nuts, ull want to try ptfe on the olive rather than the threads. Good work bud

@OfficeBoyBuilder Жыл бұрын

Thanks mate, appreciate the advice! 👍💪

@peterhaigh5764 Жыл бұрын

My advice put plenty of ptfe on the tails I’m no plumber. Amazing how the experts chip in when they see something they don’t like. Your open to advise so no point them commenting if it’s not with advise!

@mikmik7033 Жыл бұрын

Big fan.. excellent work need an advise on timber frame base for toilet planning to follow Ur footsteps for timberframe video

@OfficeBoyBuilder Жыл бұрын

Thanks and best of luck!

@glynnhancock9546 Ай бұрын

What make are the rads you used?

@Game0verFool Жыл бұрын

Nice work. I have been considering doing the same in my 1930s build but I've been concerned by what I've read. My understanding is that significantly increasing the power output of your radiators may have limited benefit if the pipework isn't upgraded to supply enough water to match the increased radiator size. Is this something you have looked into?

@OfficeBoyBuilder Жыл бұрын

Great thought. We practically replaced all the pipework because we did a whole new boiler and heating system. Some of the old pipes remained the same, but large sections were replaced or added with new pipes.

@Dave_MacG Жыл бұрын

You heating the street up with that monster radiator in the hall? 😂 How do you find the underfloor heating? Is it worth it? Take it there is enough heat from it that you don’t need radiators too? Something I would be looking to do in the future.

@OfficeBoyBuilder Жыл бұрын

Lol yeah it could heat half the road 🤣👍💪 The UFH is great, very efficient and comfortable. No radiators out the back there. We have got a radiator in the playroom which is close by though. That helps because we have an open fire place and get drafts a bit through it

@MarcusT86 Жыл бұрын

Where are the vids gone buddy?

@OfficeBoyBuilder Жыл бұрын

Time and money! We're on a pause for now. Still tons to do around the place, but we're not in a position to tackle it just yet...soon hopefully!

@jameshill890511able Жыл бұрын

How’s it going mate?

@OfficeBoyBuilder Жыл бұрын

We're on a pause for now. Still tons to do around the place, but we're not in a position to tackle it just yet...soon hopefully!

@jameshill890511able Жыл бұрын

No worries, hope all is good, you’ll get there 👌

@leightonboard Жыл бұрын

It looks like you are using electrical solder

@mattsan70 Жыл бұрын

Please learn how olives work! PTFE on compression threads!! Deary me!

@MJWhelan1 Жыл бұрын

Relax princess there’s no need to blow a fuse

@hammadshah3153 Жыл бұрын

@@MJWhelan1 Hes giving the guy constructive criticism. Ptfe on the olive not the thread.

@MJWhelan1 Жыл бұрын

@@hammadshah3153 😂 how was it constructive?! If they had commented saying put some ptfe on the olive not the tread, then it would have been constructive… but they didn’t say that 🤦‍♀️