SOLIDWORKS Motion - Introduction

Рет қаралды 136,558

Күн бұрын

See more at: www.goengineer.com/products/so...
This 30 minute webinars gives you an introduction to SOLIDWORKS' in-built Rigid Body Dynamics tool and how it works,. It talks about the different options available like Motors, Contacts, Gravity and Springs. Once solved, the webinar describes some of the post processing options. Finally, a sneak peek into Event Based Motion is also looked at. Webinar presented by Arvind Krishnan of GoEngineer.
About GoEngineer: GoEnginneer delivers software, technology and expertise that enable companies to unlock innovation and deliver better products faster. With more than 30 years experience and thousands of customers in high-tech, medical, machine design, energy and other industries, GoEngineer provides best-in-class design solutions from SOLIDWORKS, Stratasys, CAMWorks and Agile PLM.
www.goengineer.com
/ goengineer
/ goengineer
/ goengineer
plus.google.com/+goengineer

Пікірлер: 50

@hc3d 3 жыл бұрын

The best explanation of Solidworks Motion I have found on youtube! Much appreciated!

@notmyname154 Жыл бұрын

GoEngineer Rocks

@user-eg6xy5jl3w 2 жыл бұрын

You guys are making a super quality content and you are making it available for free , what a great job

@goengineer 2 жыл бұрын

Our pleasure! Be sure to subscribe for more great 3D CAD Design and 3D printing tutorials.

@agstechnicalsupport 4 жыл бұрын

SolidWorks Motion very well summarized within half an hour. Thank you for making and posting such instructive content !

@goengineer 4 жыл бұрын

You're very welcome!

@mohamedmostafa-be1xy 6 жыл бұрын

excellent and i hope to make another section based in motion analysis

@Mahmil 3 жыл бұрын

Great Webinar. Thank you Arvind Krishnan.

@yileanglim401 3 жыл бұрын

Good day to Goenginerr, i have a problem regarding about the import motion load. I have a shaft with a flywheel to rotate about 10 rpm in 30 s. The motion analysis runs smoothly, however, when i tried to import the loads into static to see the deflection and inputted bearing fixture (rigid) onto the split lines i had created, the transferred remote load appeared to be malfunctioned, and solid work gave out message saying that " One load/fixture/connector/contact is invalid". I had turned off the inertia relief and it still didint run smoothly with fixture on and no change in remote loads. Sadly, I tried test with Bearing Fixture, Roller/Slider Fixture, Cylindrical fixtures to mimic the bearing support during rotational motion, all failed and deformed drastically. May i know how to handle the remote load definition imported from the motion load when we had inputted the fixture or how i should input my fixture correctly? Thankyou.

@samehyounis228 4 жыл бұрын

how I can download these parts to apply what I learned?

@user-vz5fz7iu7s 2 жыл бұрын

this video is amazing

@yeetskeetledeet8184 3 жыл бұрын

Thank you for the tutorial

@mrrohan6396 3 жыл бұрын

Hello. I had a doubt regarding solidworks motion study. Would be great if you could help. Thanks in advance

@mohimen1617 3 жыл бұрын

can i use sensor data in real time for example i want to crate a force on a body its value is dependent on the body's velocity

@burakayan3360 3 жыл бұрын

SUBSCRIBED !

@yassinfouad8447 2 жыл бұрын

That was very helpful

@danielmoreira1003 4 жыл бұрын

excelent. thanks

@jagsproduction Жыл бұрын

Well Explained Sir🤘

@larrykent196 2 жыл бұрын

Nicely done, thank you there are teaching lessons here also, to the point great job. Cheers!

@goengineer 2 жыл бұрын

Glad it was helpful! Be sure to subscribe for more great 3D CAD Design and 3D printing tutorials.

@larrykent196 2 жыл бұрын

@@goengineer Very much so, thanks for the videos. I ask can you specify the version using and if the features are relative to either or all packages such as standard professional or premium. Outstanding job on the lesson as you included that information here. I have watched many more and don't find it consistent.

@indraferijum9328 Жыл бұрын

good. thank you sir.

@atiqriad5481 5 жыл бұрын

very useful. many thanks

@goengineer 5 жыл бұрын

Thank you for watching. Be sure to subscribe if you haven't already.

@Mahmil 3 жыл бұрын

My question is, if it is possible to do the beam deflection in Solidworks motion. I am trying to do this by fixing one edge of the beam with fixed support using mates and then mating a strip on the other side of the beam and applying a linear motor on the strip that pulls the strip and should bend the beam but it's not bending actually.

@goengineer 3 жыл бұрын

Hello Hafiz, you must use SOLIDWORKS Simulation to calculate deflection. Fortunately you can import Motion loads directly into Simulation! goeng.io/sk3CPp

@tanzanos Жыл бұрын

Thank you.

@goengineer Жыл бұрын

You're welcome!

@praveensingh7216 2 жыл бұрын

Cam we import motion analysis results into CFD? Since I want to run the CFD on a piston cylinder based compressor!

@goengineer 2 жыл бұрын

No unfortunately Motion analysis cannot import to SOLIDWORKS Flow Simulation. Flow Simulation has no moving parts only the flow field moves in SOLIDWORKS Flow Simulation. The only exception to this rule is rotating parts it is possible to physically move rotating parts in SOLIDWORKS Flow Simulation. What I do when I need to run an analysis where parts are moving in Flow Simulation is to run several simulations in a row where the only thing that is changed is the placement of the part file or part files in space. Then you can compare how the flow reacts with the parts in various positions .

@shadpatauli8851 2 жыл бұрын

Can anybody help me with linear motion?

@PrasanthNivi 3 жыл бұрын

Sir what is the purpose of giving hinge mate instead of concentric in cylinder assembly .. Thanks in advance

@goengineer 3 жыл бұрын

The hinge mate combines both a coincident and concentric constraint. This saves you from having to create multiple mates for the same joint. Thanks.

@PrasanthNivi 3 жыл бұрын

@@goengineer Thank you for your explanation and support

@MuhammadAwais-jh2dy 3 жыл бұрын

How to get rid of redundancies

@donallen7458 Жыл бұрын

I'm having difficulty animating a model. Can I send a file and have you walk me through the process? TIA Don.

@goengineer Жыл бұрын

Don, if Go Engineer is your VAR please contact our Tech support department www.goengineer.com/support And they can help you if the issue is a glitch in the software or get you some training assistance with an application mentoring session.

@ajeesh3485 Жыл бұрын

is it possible to find the force the face of the piston due to torque applied in the crank?

@goengineer Жыл бұрын

Yes, it is possible to get that information, though the process is a bit complicated for a youtube comment. Reach out to your VAR's Training team for a more complete answer.

@goengineer Жыл бұрын

Sorta like this: www.goengineer.com/blog/prescribed-displacement-reaction-force-solidworks-simulation Prescribed Displacement to find Reaction Force in SOLIDWORKS SimulationIn this article, learn all about prescribed displacement to find reaction force in SOLIDWORKS Simulation.www.goengineer.com Use a torque instead of prescribed displacement then measure the reaction force.

@ajeesh3485 Жыл бұрын

@@goengineer thankyou

@rabindrasah9697 4 жыл бұрын

thanks for such an informative session............. can I apply motor to more than one mates at a time and animate it together??

@goengineer 4 жыл бұрын

Yes you can, in fact you can add a motor and define it’s parameters (Velocity/acceleration) in relation to another component/motor reference velocity/acceleration.

@rabindrasah9697 4 жыл бұрын

@@goengineer ok thanks.... can you suggest any video or tutorials. It will be really grateful. I tried searching it but i can't. Plz help me