Thanks so much. I needed to program a second sommer remote. This video was very beneficial 👍🏻 thanks for explaining everything

Thank you for that video. Summary: For normal door opening you want to send signals to channel CH1 on the door. Get there by pressing the RADIO button once. The Ch1 light will show red. Then with a remote (I have 4 pearl remotes, name on back) press on one remote button that you want to use for open/close operations on this door. The CH1 light will flash a couple of times and go out. That button is now programmed. Repeat for other buttons or other remotes that you want to control this door. Then repeat for each other door. I have a sommer sliding gate that works the same way, Except the button initiates open and close happens automatically after 30 secs. I found a function for copying one remote's programming onto another identical remote. It worked sometimes, the rules were not very clear to me. But programming four buttons on each of four remotes to operate two doors did not take long. On each remote the middle buttons open the door, the end buttons the gate.

Thanks. Just what I needed.

I have the same opener, but I have a problem that the top door element isnt getting closed enough. Its like a gap of 1,5-2" on top from the door element to the wall/top gasket. Any idea how i can make the motor push the element all the way? There is no obsctructions and there isnt tension between the port engine and the port itself.

Why re there Channels 2, 3 and 4? How to use them?

That’s a great video on those remotes , those motors are so quiet what brand name are they? At my home my garage door keeps opening up from someone in the neighborhood, we’ve changed codes so many times but I believe the motor is obsolete now,so I believe I have to upgrade my garage doors motor, also just throw in the ballpark price of the motor also if you can !