Рет қаралды 68,637
For full parts replacement procedure check out this video 😉👉 • SONY XB950BT/B1 broken...
If You don't own a drill , try to borrow one from friends or whoever , OR you can always heat up a small nail or a needle holding it with pliers to melt holes through parts ( be careful not to burn your hands tho)
Same fix method apply to many sony and other headphones with similar design .
Drill bit used is 1.5mm ( 1/16th USA) and the screws used from one side of the hanger assembly are 1.8mm perfect size and length for this fix . Remaining 2 screws are sufficient to hold hanger in its place !
Hangers and headband on the XB950AP( cabled version) are the same size as on the XB950BT & B1, perfect substitute ! For this swap you will need an soldering iron to release the wire .
Hopefully you can put your fabulous sounding headphones back into use with this alternative repair !! Happy listening ✌😊