Soul Kayaks Super Skip RR "Detailed Walkthrough"
Рет қаралды 2,374
Күн бұрын👇👇 Links Below for Gear in Video 👇👇
Super Skip RR 👉👉festivewater.com/collections/all
Hiko Guardian Vest 👉👉yipyak.ca/
Lettman Paddle 👉👉www.splattypus.com/
Sweet Protection Helmet 👉👉amzn.to/3TJ81ff
Level Six Creek Boot 👉👉amzn.to/3vmoDj1
Kayak Water Filter Bottle 👉👉amzn.to/41G8qRv
Gopro 11 👉👉amzn.to/48yCfFW
Levelsix Paddling Top 👉👉amzn.to/43nbWBh
Level Six Ace Skirt 👉👉amzn.to/3H2xKI4
Level Six Compact Throw Bag 👉👉amzn.to/3sHFHyC
Become a Channel Member Now with the link below to support my Channel 👇👇👇
/ @wadeharrison
Get Your Shuttle Drive Mech Here 👇👇👇
the-shuttle-drive.myspreadsho...
www.soulwaterman.com/products
SuperSkipRR. Say it out loud "Superskiperrr". RR: Ready to Race? River Runner? Really Rad? It means what you want it to mean. And it paddles the way you want to paddle.
We took the SuperSkipper, and made a sporty, zippy version. It is essentially the same boat, but with a twist: You can pivot turn using the Dip Tail design.
Some people feel more comfortable in a boat that allows them to whip the boat around on a stern pivot, and if that sometimes makes the boat slightly more susceptible to backendering, it's a worthwhile tradeoff for the added control and precision. And when that does happen, it's such a controlled experience, that you're still going to put the boat where you want it.
This isn't a half-slice. You're not going to be stern stalling this thing. It's designed to pivot quickly and precisely, and then eject you on your way. So if you paddle a half slice, or a playboat, the crossover to the SuperSkipRR is going to be smooth and effortless: like lounging in your favorite couch!
Think of the SuperSkipRR as the SuperSkip, turbo charged!
Main technical Specifications
Kayak Name SuperSkipRR
Length 8'11" | 273cm
Width 26.75” | 67cm
Volume 84 Gal | 319ltr
Height (front) 13.5” | 35cm
Height (Back) 8” | 20.5cm
Nose Rocker 18.5” | 47cm
Tail Rocker 10” | 25.5cm
Cockpit Length (Outside)
35” | 89cm
Cockpit Width (Outside)
21”| 53cm
River Runner Paddler Weight 130bs-250lbs | 60kg-114kg
Creeking Paddler Weight 130lbs - 210lbs | 60kg-95kg
Thanks for Watching!
**This video may have affiliate links to the mentioned products, which means every purchase made earns a small commission to keep our channel running :)
#Soulkayaks #whitewaterkayaking #kayakreviews
0:00 intro
0:50 Specs
1:36 Deck Walkthrough
4:37 Outfitting
6:57 Sidewall
8:30 Hull Walkthrough
9:49 Wheel
@WadeHarrison Ай бұрын
👇👇 *Links Below for Gear in Video* 👇👇 *Super Skip RR* 👉👉festivewater.com/collections/all *Hiko Guardian Vest* 👉👉yipyak.ca/ *Lettman Paddle* 👉👉www.splattypus.com/ *Sweet Protection Helmet* 👉👉amzn.to/3TJ81ff *Level Six Creek Boot* 👉👉amzn.to/3vmoDj1 *Kayak Water Filter Bottle* 👉👉amzn.to/41G8qRv *Gopro 11* 👉👉amzn.to/48yCfFW *Levelsix Paddling Top* 👉👉amzn.to/43nbWBh *Level Six Ace Skirt* 👉👉amzn.to/3H2xKI4 *Level Six Compact Throw Bag* 👉👉amzn.to/3sHFHyC
@seanhogan563 Ай бұрын
I really hope you get your hands on the new prijon beast, I'd love to see you break it down.
@WadeHarrison Ай бұрын
Yeah hopefully can get one here in the USA sometime
@slicebo Ай бұрын
Thoughts vs. the Reactr when you get your hands on the production version... Always appreciated!
@WadeHarrison Ай бұрын
For sure
@corran-soul Ай бұрын
We have a hard time getting the boat out of the mould with a one piece deck mould, so by splitting the deck moulds froward and back off the cockpit made it a lot easier.
@WadeHarrison Ай бұрын
so this is 2 different molds with 3 parts each? Removing the stern deck to pull it that’s very interesting?
@corran-soul Ай бұрын
@@WadeHarrison Getting the Hammer out of the mould is a nightmare. With the new cockpit shape thats way drier for skirts, the workers hate it. So by splitting the mould like this it adds a little cost and complexity, but it makes getting the boat out a lot easier, and less chance of deforming the boat fighting with it. Both the SuperSkipper and the SuperSkip RR are made this way (though we might not ahve needed it for the SuperSkip RR because the smaller tail makes getting the boat out easier.
@WadeHarrison Ай бұрын
@@corran-soul agreed I have seen more kayaks get trashed twisted and get miss shaped during the demolding process then anything else. I could see that being a great way to help minimize that. Nice one on doing 3 part kayak molds 😎
@gemmawatson6100 Ай бұрын
3 part mould for the win! Power seat and Im there!
@WadeHarrison Ай бұрын
Exactly
@matthewwallin9384 Ай бұрын
you looked good in this thing!
@WadeHarrison Ай бұрын
You look good in everything 😎
@zacharylindrew4433 Ай бұрын
Curious how this compares to the new Dagger Indra and the Puffy Steeze
@stellarmetalworks9850 Ай бұрын
I'm curious to see anything about the Indra.. When do we get some visual info?? its boat buying season.. The Indra is a myth lol
@mikecatura6210 Ай бұрын
Wade posted a short of it yesterday
@WadeHarrison Ай бұрын
Yeah it pretty different from both of those
@cheskybaba4864 Ай бұрын
Wade - why would you not want a drain plug?
@WadeHarrison Ай бұрын
You have a big one your sitting in lol so technically you are the drain plug
@cheskybaba4864 Ай бұрын
@@WadeHarrison Well yes, to get the majority of the water out - but there's always that little sloshing H20 that seems to not want to go that way.
More Creek Fishing Adventures
Рет қаралды 11 М.
Cool Items
Рет қаралды 25 МЛН