No video
South Carolina Fuel Chipping and Logging Operation Part 2 of 2
Рет қаралды 39,262
Күн бұрынWe filmed this video on the 3rd of May, 2013. This contractor was clearing land that will soon be farm pasture and all of it was fairly immature and being processed into fuel chips. The Woodsman 337 FC is a excellent drum chipper, with a CAT C18 Engine at 700hp. This chipper will load a Van with approximately 28 ton in less than 15 minutes. As you can see the skidder operator is keeping wood to the chipper pretty steady and he has a good supply of additional stacks which he can grab from if the skidder is not back immediately. The setup is very good. With most chipping operations the trick is logistics and keeping vans coming to the chipper. The chippers are so productive that the bottleneck is the availability of trailers and trucks to move the product to Mill.
Jesse Sewell
Sales Manager
Forestry First, LLC
803-807-1726 cell
jesse@forestryfirst.com
skype: jessesewell
@johnm.evangelis693 5 жыл бұрын
That 337 FC is an awesome wood chipper! Great job to tha Cat operator he kept that chipper busy!
@jamescarter1500 5 жыл бұрын
It looks almost as good as a Peterson! Better than a morbark. But I like the blue ones
@richardgrumpywelsh2485 6 жыл бұрын
I like the chipper, it does not throw out the trash like some of the others do thanks for posting
@jamescarter1500 5 жыл бұрын
Because it's a fuel chipper! All of it will burn! The chippers you see with the discharges are fiber chippers (paper) no bark no small tops! A flail chipper (paper) has chains in it that beat the bark,tops off =discharge
@mbeard1213 9 жыл бұрын
Wish you had that chipper on my land in Fayetteville, NC. Good job!
Forestmachine Impressions
Рет қаралды 69 М.
Lord Gizmo
Рет қаралды 428 М.
Fantastic Machinery
Рет қаралды 45 М.
Bandit Chippers
Рет қаралды 3,3 М.
Otiss Machines
Рет қаралды 1,3 МЛН