Used Car Guy Auction Special! Rich Running '05 Equinox 3.4

Used Car Guy Auction Special! Rich Running '05 Equinox 3.4 - Part II

Рет қаралды 131,316

Ай бұрын

In a previous video • Used Car Guy Auction S... I had a look at this auction car and determined it had the wrong injectors in it. Let's take a field trip to ‪@wilbertsupullit‬ and see if we can get the correct ones and fix the rich running condition and get this car back to the dealer.
-Enjoy!
Want to support us AND get early access to the SMA videos as they are uploaded? Consider joining the SMA "KZfaq Membership" by clicking here: / @southmainauto
You are also able to support us on Patreon if you feel inclined to do so by clicking here: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch! teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store: www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you so much for the support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 641

@samcooke2742 Ай бұрын

Taking your Snappy ratchet to the junkyard is a pro move. Tells the world "I'm scrounging for parts, but my tools are not at the pawnshop."

@Alboalt Ай бұрын

I was nervously watching to see if he'd knock the entire set onto the ground

@JimmyMakingitwork Ай бұрын

"Not at the pawn shop...Yet."

@jeremyah78 Ай бұрын

What’s wrong with gettin tool at the pawn shop?! Lol

@Clynikal Ай бұрын

There’s nuttin’ wrong with getting ya tool at the porn shop

@teaches2010 Ай бұрын

@@jeremyah78 absolutely nothing!

@johnnyhag675 Ай бұрын

Always love field trips to Wilbert's. Thanks for sharing, Eric.

@dougjones9493 Ай бұрын

The good thing about getting junk yard parts is that it gives you experience doing the job😂

@rheidtech Ай бұрын

Yup. Lol... woops that broke...I wont do that again. Lol. ✔

@robertsmith2956 Ай бұрын

best way to find out how your trim is attacked. Got my 3rd brake light for $8 on Fathers Day special. Had windshields for $25, but alas my truck is on blocks and I don't have the scraper / cutting tools. But next year......

@Troy_Built Ай бұрын

Practice before it's critical you don't mess up.

@GTIwarrior Ай бұрын

Junkyard Wars, greatest tv show ever

@DougieLawson Ай бұрын

Here in the UK we had Scrapheap Challenge (introduced by Kryten (Robert Llewelyn) from Red Dwarf). That was spun off from Junkyard Wars in the US by RDF productions. It was a fantastic show with some of the teams becoming equally as famous as the presenters.

@brianpiper3188 Ай бұрын

@@DougieLawson I loved Scrapheap Challenge a lot more than Junkyard Wars! I also enjoyed Top Gear UK and The Grand Tour!

@DaddyBeanDaddyBean Ай бұрын

Best JW moment: they had to build a hovercraft, and found a complete jet engine fairing to house their fan. They were having a hell of a time cutting it - thick aluminum - and it was taking forever, they told their expert they might need to change directions. He said "Go get me that stick welder." They said "no no, you don't understand, we're trying to CUT it, not weld it together!" Expert Guy just stared at them in silence, then said very quietly, "just get me the (expletive) welder." Turned it up to Ludicrous and burned off the desired piece of fairing in about a minute.

@theobillings8930 Ай бұрын

I miss Junkyard Wars too, one could replace a bunch of the newer stuff with that and it would be 1000% better.

@kirstenspencer3630 Ай бұрын

Yes, JUNK Yard wars. My husband and I loved it !!!

@acmaras Ай бұрын

Eric, you should set yourself up a "hit-and-run" bag. I'm in field service and it's a typical thing to have a full set of tools and a hit-and-run bag for quick repairs and projects. Fill it with the types of tools you used on this trip to Wilbert's. Add tools as you see the need. This way you just grab your bag and go. No planning, no thinking, easy peasy! The hit-and-run bag is never used for anything else so it's always ready. Add a roll of towels and hand cleaner and it makes you self-sufficient away from your toolbox.

@Ghauster Ай бұрын

Not only that, but having a set like he does. If there's something missing. You know before you leave.

@jameslovitt994 Ай бұрын

Don't bet on it. You could load the entire shop in the trunk of your car, there will be something you'll need you won't have.

@robertsmith2956 Ай бұрын

@@jameslovitt994 I just run down the street to harbour freight when that happens.

@acmaras Ай бұрын

@@robertsmith2956exactly what I'm talking about! The hit-and-run bag is never complete. Anyone who does the type of service I do understands that. However, that bag hits over 90% of what is needed on the fly. Any time you find you don't have a tool you buy it and leave it in the bag. After 43 years in the field my hit-and-run is still small enough to carry and keeps me out of most jams.

@OcRefrig Ай бұрын

Yea, i Do think that's a Good idea. The " Wilberts Go Bag " also it could double as a " Family Road trip bag " or He Could Just Buy a " Utility Bed Service Truck " and Set it Up to the Hills. it Would Make for a Cool Channel build too ! it Make for some Cool Videos too ! The SMA MACHINE !!! 1974 Chevy C20 4 x 4 Utility Service Truck. with a Small block 350 & a Turbo 350 or turbo 400 tranny on 36" Tires. A Cheap Bullet proof set up ! Paint Green Alligators 🐊 on the Doors ! Call Him Wilbert !

@briandeschene8424 Ай бұрын

My problem with going to the local You-Pull-It: 1) Forgetting to bring a tool you need, 2) Forgetting one that you brought when you leave!

@thepetehill Ай бұрын

Yes!!!

@zeph_os Ай бұрын

The amount of times I've almost left a screwdriver in an engine bay is unspeakable

@robertnicholson771 Ай бұрын

I am pretty anal about putting a tool back in my bucket at the junkyard. I've found a lot of tools from guys who didn't.

@snoopy5736 Ай бұрын

I've found some great tools at the junkyard 😂

@riceburner4747 Ай бұрын

The notorious 10mm socket.🙄😂😂🤣🤣🤣 I never seem to FIND tools someone ELSE left.😢

@burks1993 Ай бұрын

I don't even make it a minute into these videos before hitting the like anymore because everything he does is gold. Great channel.

@TremaineLea 24 күн бұрын

Same. His and @RainmanRaysRepairs are always an automagic win!

@elcheapo5302 Ай бұрын

The OG Junkyard wars, with Cathy Rogers and the British lads. Television perfection.

@Vincent_Sullivan Ай бұрын

Wasn't the original OG British version called "Scrapheap Challenge"? As you say, television perfection with Cathy Rogers and Robert Llewellyn presenting. Junkyard Wars was the US version of the show hosted by presenters I found quite obnoxious - so they will remain nameless.

@richard1835 Ай бұрын

I worked for a Mr. Bill Everett of Palm Beach County Recycling a wonderful man who I honored very much. I pulled engines and transmissions, ran the loader ,cut tires, scraped vehicles, crushed cars , they sold parts, We would pull parts for customers, it was a good time. I know what its like in the salvage yard. For you going to the salvage yard like that for the customer is a good thing. I hope they appreciate you.

@kenholt8297 Ай бұрын

Mr. Bill Mr. Bill. 😂😂😂

@rocketscientist007 Ай бұрын

All but 2 are now either closed or sold to LKQ or U-Pull & Pay.

@richard1835 Ай бұрын

@@rocketscientist007 U Pull and Pay

@richard1835 Ай бұрын

@@kenholt8297 Yes. Mr. Bill Everett

@robertsmith2956 Ай бұрын

I was on the far side of lot pulling a door when I heard the loud speaker say the rx 7 rotor was at the counter. I dropped everything and took off running. It was a brake rotor😟 I still want to see what those triangular rotors look like. At least all my tools were still there, and I got my door. Junk yards are my toy store. There is something about cars without their cloths on.......

@donkay594 6 күн бұрын

I am a senior woman and have been watching your youtube for a couple of days. All I know how to do is fill my car up gas and drive it. I have an older GMC Acadia, which has had issues from the day of purchase. I really love watching. Keep your working knowledge and reading the signs of issue. The best part of these videos is seeing you fix the problem and the end results.

@I-watch-at-2x Ай бұрын

Nothing better than watching you perousing the junkyard while enjoying my coffee, morning everyone. Thank you for the update Mr O!

@blake8297 Ай бұрын

Man, I miss Junk Yard Wars. That was one of the many shows I enjoyed whilst growing up.

@mrbill8542 Ай бұрын

YEAH!!! road trip to Wilberts !!!!

@johnlane5874 Ай бұрын

You knew this was a serious job when Eric took more than the Wear Toolcheck (for the on the move mechanic) to Wilbert's u-pull to scrounge parts 😁 . I can remember here in the UK when I was younger you could go to the scrap yard (as we call them) climb over, under and between stacks of car to get your parts. These days it just isn't allowed, you check in at "reception" tell them what your after, they them want your vehicles VIN number to see if they've got the part on the shelf ? If it's a starter motor or alternator they do exchange even on second hand so you've got to give them a core unit or it costs more 😕 . Great seeing a mini series on repairing this Chevy Thunder ⛈️.

@GTIwarrior Ай бұрын

That fuel line disconnect tool was genius. Way to use your noodle!

@ratbert86 29 күн бұрын

Mad props for not being a junkyard scumbag, destroying everything in your way to get what you are after. Yes, sometimes it's necessary but Junkyard Karma is a thing and you have plenty of the good kind.

@donakahorse Ай бұрын

Wilberts is so much cleaner than what we have here in my area. But then most of our surviving salvage yards have been there forever. Once again, you're the man Eric, thanks for another video

@mentals555 Ай бұрын

Ours is just mud

@johnlarkin549 Ай бұрын

She smells fresh we’ve all prayed for that at certain times, but I got good at holding my breath!🤣🤣🤣

@rickburt7055 Ай бұрын

Now that's funny, I don't care what anyone else thinks 😂😂😂

@tedpope517 Ай бұрын

I love scrap yard field trips !!! Reminds me of my high school days on a limited budget. 😂

@mikeam3871 Ай бұрын

I remember my kid bashing up his jeep Cherokee drivers side fender and door. We went to this auto wrecker who told us we could go out and find what we needed. I’m walking out with him and just mentioned, “you know they might have what you need, but you’re going to have to do some paint and body work to get it to match”. We get to the jeep and it’s the same color as his and pristine. Felt like Christmas morning.

@StopDropandLOL 28 күн бұрын

The GM special tool for some of those GDI injectors is literally a mini slide hammer, it's hilarious.

@PK15306 Ай бұрын

Junkyard Wars was the best. I actually messaged Discovery when they cancelled the show to ask them why...no response. Great outro Mr. O.

@greg.goergens6315 Ай бұрын

I'm a firm believer in OEM parts. I used to be so anal about it that I would buy OEM front brake pads because they were the best option for long life and no brake dust! That's what originally sold me on OEM parts! Great video as always!

@tjlingram Ай бұрын

Kinda hard to do when OEMs make the parts unatainium

@user-wj9wq7mk4h Ай бұрын

@@tjlingramor when they are just reboxed parts from various manufacturers

@stevewhite3424 Ай бұрын

@user-wj9wq7mk4h Well, for the most part, they are re Boxed parts from other manufacturers because GM doesn't make injectors. or brake pads or rotors, or brake calipers. They outsource many, many parts. The key thing is I think is buy American to the maximum extent possible.

@dans_Learning_Curve Ай бұрын

Figure out who manufacturers the parts for OEM. Buy that.

@user-ut6ji8my2h Ай бұрын

Today it's almost impossible to tell the difference between OEM and counterfeit

@craigmccolm285 Ай бұрын

Thanks Eric O, you are a blessing to your customers. I hope they appreciate you!

@alwhitesell4023 Ай бұрын

Yes I loved junkyard wars, definitely a show that needs to come back. You can catch it on the KZfaq.

@donparrish5634 29 күн бұрын

“The Classic Reach Around”.

@williegillie5712 Ай бұрын

A guy doesn’t realize how much we rely on the boneyard for parts that are hard to find or obsolete. Can you even imagine not having one around? Not me. Half my relatives still drive cars ya can’t get parts anywhere else . Wilbert’s to the rescue

@matthopcroft2535 Ай бұрын

Nothing better than a “Classic reach around “🤣🤣 And let’s not forget “She’s a virgin down there”

@danbrown3043 Ай бұрын

Definitely need junk yard wars back!! even the British one too I'd take

@chucksmalfus9623 Ай бұрын

Absolutely would love it if they brought back junkyard wars!!! 😊

@carbonstar9091 Ай бұрын

Back when TV was still worth watching occasionally.

@Todd66 Ай бұрын

Such a fun show!

@TimfromAlabama Ай бұрын

Just had this type of issue on my 05 Silverado 5.3L. Mechanic changing my injectors, bought from the local pats stores, they're all chinesium junk and the injectors all leaked into the cylinders like the internal parts just wouldn't close or something.. Not gonna mention the part store names, but it was 3 sets that all did the same thing, plus a set from a rebuild company and all were the same leakers. Had to improvise with the OEMs and finally got it nailed down after 3 weeks. Felt sorry for my mechanic for the trouble I caused, but he's a good one, and it wasn't his fault, it was the makers, and we all good. Even new, they're not always any good from parts stores so OEM from now on. Cheers.

@Travisty383 Ай бұрын

“You’re wearing the shirt of the band you’re going to go see?! Don’t be that guy.” lol

@wadepatton2433 Ай бұрын

you can't buy one if you don't go see 'em. AND who changes shirts to go to the salvage yard? He already had it on.

@Travisty383 Ай бұрын

@@wadepatton2433 just a fun movie quote I always think of in situations like those.

@thagerdorn2009 Ай бұрын

It's crazy to me that you have so many cases and issues with aftermarket and junk injectors...ive bought and fixed and sold over 200 cars, not including cars I've just worked on over the last 15 years...and never once have i ran across bad or aftermarket injectors. You can sniff the green crusties but you can also sniff those jungle website injectors. And because of your wonderful videos i continue to learn everytime. So thank you Eric

@smarthome2660 Ай бұрын

The last time I was at a U-Pull-It was 1999. I had to drag an Olds 350 Rocket out of a 1978 Olds 98 across gravel on an engine hoist 100 feet. A few times our local U-Pull-It had a sale, all you can carry for $25.00. They let me pile my stuff on a Cadillac hood and drag it with V-belts. We were allowed 1 trip in & 1 trip out for $25.00. 1987

@drummindude2789 Ай бұрын

Well this video made me become a member. I have watched just about every video on this channel. As a mechanic I have learned so much for you. Thank you!

@SouthMainAuto Ай бұрын

Welcome aboard!

@n3lee Ай бұрын

I used to always be out at a pick-a-part junkyard for a few years in the early 00's and late 90's -- miss those days for sure, glad they're still around with all the insurance and lawyers in this world... either way, also miss Junkyard Wars...

@newsweathertraffic18 Ай бұрын

I have totally given up on the U-pulls around Toronto after one wanted $200 for the passenger mirror of a Chevy Uplander - not heated or even powered - $200!!! Another one that has small machines wanted $300 for 3 spindles off a 30 year old kubota deck and $125 for the starter off a trashed snowblower. In fact I can tell you those same injectors and a fuel rail here would be $160 plus government tip at the local Kenny's - which is way cheaper than I expected.

@thepetehill Ай бұрын

Your enjoyment of going to the pick a part really comes through in this video!

@faxmen09 Ай бұрын

Say it regularly with Eric O and SMA, customer very lucky to have you.

@kirbyyasha 24 күн бұрын

Always agree on if the price is too good to be true, it is. I remember doing the OptiSpark on my Buick Roadmaster. The auto part stores? Around $100ish. OEM? $300+. After a bunch of troubleshooting, put an OEM in, and well, it runs like a dream.

@xenolard Ай бұрын

Got to love the neutral drop the battery ratchet technique

@blueskiesmobileauto4253 Ай бұрын

Junkyard wars! Haha man I loved that show. Wilbert’s and Pick a part need to face off

@atikovi1 Ай бұрын

Should have autographed the intake for the next guy.

@mbazzy123 Ай бұрын

I have a distant cousin that owns a very large salvage yard in Maine, while is was in high school he used to let me look through the yard for parts for my Ford Ranger pickup that was awesome so much to "retro fit" to my truck, He was very good to me and never would let me pay him, I have never forgot that !

@user-zl1bh2gk1b Ай бұрын

Amazing how clean and organized Wilberts is. Pretty cool how they have the vehicles propped up on old rims

@SouthMainAuto Ай бұрын

I agree!

@thagerdorn2009 Ай бұрын

We have a junkyard here in Columbus Ohio called U-Part-It...it's all on concrete and the cars are all on these insanely nice and sturdy and safe tube bar assembly things that look like giant brush guards but you don't have to worry about the cars coming down and you can actually get under the cars and it's always kept very well organized and clean. And they have the cheapest prices in town. Better than pick n pull

@1320pass Ай бұрын

@@thagerdorn2009 yep Columbus auto shredding on the opposite side. I used to haul scrap (in the biz we call it Frag) out of there. There's a big hammer mill they feed the parted out cars into. Pulverizes them to bits. One of the foundries I hauled to was Amstead Rail down the road. They manufacture train wheels. Good folks to work with on both ends.

@1320pass Ай бұрын

Around here we have mud, weeds, snakes and ticks. Every now and then you'll have a big black-snake squirt out at you. It's still fun to go out to the junkyard!

@leftyo9589 Ай бұрын

huge difference from junkyards of 30 years ago or more where they were just stacked on top of each other, no order, and only the old guy knew where stuff was.

@50lbbrain Ай бұрын

Junkyard Wars was the best!

@braaapattack2937 Ай бұрын

I have that same crescent tool kit, bought it back in 07 when I was in high school, best tool kit I ever bought. Still use it to this day

@user-pb4hz7my2n Ай бұрын

Totally with you on Junkyard Wars.

@jayjudd6518 Ай бұрын

Congratulations he got to preach to the masses. I am a believer now.

@lackeydehackey405 29 күн бұрын

Love it when Mr. O gives non oema parts the Stink Eye

@normmuelleman2570 Ай бұрын

I loved Junkyard Wars!!!

@richard1835 Ай бұрын

Thank you SMA

@joblo8808 Ай бұрын

While I'm no longer able to wrench on my cars due to excessive geezerdom, thank you for bringing back some fond memories of The Great Junkyard Treasure Hunt.

@PhillipBailey Ай бұрын

Excellent diagnosis!

@kennethhoovler9050 Ай бұрын

I wish we had a yard like Wilberts near us. The nearest self service yards are 2 hours away. You are lucky to have access, and your customers are happy that you are willing to go the extra mile to source used parts.

@Vincent_Sullivan Ай бұрын

Well, to be technically accurate is it 2.3 miles (one way) from SMA to Wilbert's!

@robbrobb2161 Ай бұрын

Wonderful videos. Learned a lot as usual. Thanks for sharing.

@ronaldbrosius7488 Ай бұрын

Great video, thanks for the part 2

@glenharper3136 Ай бұрын

Thanks for the video Eric.

@seanwies6637 Ай бұрын

14,231,692 votes for Junkyard Wars!!! Great vid as always.

@TremaineLea 24 күн бұрын

Ok, that hose clamp hack for a fuel disconnect is pure gold!

@jbrhel Ай бұрын

Thanks again, Mr. O! Happy days!

@rickys6770 Ай бұрын

The only thing better than going to Wilberts is going to Wilberts and stopping for Ice Cream on the way back

@williamsanders6092 Ай бұрын

Eric, you're a great mechanic, but you have to set up a universal box that you can put in the things you might need, like a pick and whatever else it is that you seem to always be missing when you go to the auto recycle yard.. Think about what you might need when you go to take it off or put it together. My gosh, you're good at that. You should be able to make up a nice little box to take to the recycle yard. And always have it ready. You don't have to worry about it. It's just there, ready to go. You go often enough. It'd be worth your while.

@palmegranite1318 Ай бұрын

Junkyard Wars.. yeah, awesome show!

@stevenhenry5561 Ай бұрын

I agree. Totally enjoyed the Junkyard Wars. Trips to Wilbert’s close to the OG but leaves me wanting more! 😂

@cathiepieszak6967 Ай бұрын

Always love a Wilbert’s run

@larrysmith8406 Ай бұрын

worked in the salvage biz for many years. when i was racing spent a lot of time pulling parts for race cars to so i understand how sometimes you have to adapt and over come when you don't have the right tool. good job at figuring a way to get it apart with what you have.

@jeffreygortz6146 Ай бұрын

Thanks for another trip to " wilberts" love going with you eric to the " salvage" yard !!!!!!❤❤❤

@laserbuckshot365 Ай бұрын

I grew up on that show a little. I enjoyed it and wish the same for junkyard wars. It wouldnt be the same though 😂.

@crlaw75 Ай бұрын

Yes! A Wilbert's run right at the start of the video.

@mikechiodetti4482 Ай бұрын

Good fix and thanks for the tech tip. Good one Mr. O.

@vincentstellato5783 Ай бұрын

Junk Wars! Great show.

@johnstewart7022 Ай бұрын

Yay for Junk Yard Wars! Eric, I love watching and learning from your work. Carry on, brother

@stevenclaeys6252 Ай бұрын

Thank you for another great video. Cheers

@johnnym.rodriguezr3562 Ай бұрын

Great job!

@rogergoins8118 Ай бұрын

Enjoyed the trip to Wilbert’s and learning a few new tips

@kenj.8897 Ай бұрын

Wilbert's should have a golden Chariot waiting for Eric when he shows up. 👍⚡👍

@stashoski2675 Ай бұрын

👍👍👍👍👍thanks for the trip to Wilbert’s bring back memories of many trip I made

@gthomer1231 Ай бұрын

wish i had a well organized yard like that in my area

@richardsauer599 Ай бұрын

Great job Eric! Really appreciate your channel. Making car repair great again!

@dans_Learning_Curve Ай бұрын

Thank you for explaining how you change for your vacations to your play yard!! 😁

@richard1835 Ай бұрын

Your doing a great job Eric, I'm hangin with you.

@bismarcksandiego6539 Ай бұрын

Thank you for your service meemah

@johnnysechrist6313 Ай бұрын

I was always glad that two of my first cousins owned junkyards.

@doggedout Ай бұрын

You guys back east sure keep your junk yards tidy!

@FeralPreacher Ай бұрын

Any trip to Wilberts makes for a wonderful video. Thanks for sharing.

@SuperBeetle1600 22 күн бұрын

Junkyard wars!!!! My favorite!

@user-ui1ck7ie1f Ай бұрын

When you need a last minute “pick”, I always cut some wire and then bend the tip and let the stiff wire become my pick. You can leave the insulation on or trim back a little bit and use some of the copper strands. Whatever it takes to hook onto little o-rings and things. Do it all the time because I’m always losing my little pick sets or leaving them at another job site.

@crampshaw Ай бұрын

Love the Wilbert’s episodes!

@markwilliams7712 Ай бұрын

Love a used car guy auction special.

@xr500t Ай бұрын

Junkyard wars! That was a pretty awesome show.

@raleighpacheco6243 Ай бұрын

the early seasons of junkyard wars was the best!

@williamjensen4531 Ай бұрын

OEM. Thank you for your videos!

@Savageitright Ай бұрын

Junk yard wars was amazing!

@davidhollfelder9940 Ай бұрын

I keep an on-the-road toolkit in a separate case, but, as always, you never have enough tools. Repair from a page out of PHAD.

@31terikennedy Ай бұрын

The best about DIY junkyards are the OEM electrical connectors and fasteners.

@tomoconnor7543 Ай бұрын

I just love it when you go to Wlbert’s

@floorpizza8074 Ай бұрын

"Put that on there before the o-ring gets too fat. If you know, you know." Man, I felt that. I felt that hard.

@carltonlane8931 Ай бұрын

Eric so true,I go to the breakers for genuine parts,rather than copy parts,but I use common sense,good video lesson.

@Buckswoodshop Ай бұрын

Nice work!

@johndoyle4723 Ай бұрын

Thanks. Here in the UK we used to have scrap yards like this, but they have all pretty much gone now. Health and safety and Environment controls mean the cars are usually stripped and fluids drained within hours of arriving, customers not allowed on site any more. Joke , a guy arrives at the scrap yard and asks for a starter motor for a ford fiesta, the owner says yes got one, £20. The customer says the guy down the road only charges £10, the owner says well buy one there, the customer says they don't have one in stock,the owner says well mine are only £10 when I don't have one.