Mazda 6: EXTREME Brake Rotor Removal 😱

Рет қаралды 435,305

5 жыл бұрын

In this video I am replacing pads and rotors on a Mazda 6 and they are completely stuck on the hub. With a little bit of persuasion they come off.. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 1 600

@SouthMainAuto 5 жыл бұрын

OTC 6980 Heavy Duty Brake Drum and Rotor Puller: amzn.to/2T1Lds7 Astro Pneumatic Tool 4980 0.498" Shank Super Duty Air Hammer/Riveter: amzn.to/2X8aGzz

@staind288 5 жыл бұрын

What is that hollow abrasive wheel you placed over the studs to clean around them?

@tardeliesmagic 5 жыл бұрын

Did my front pads....took me ages! I'm no mechanic but worked in a garage for may years and watched many youtube videos.You just need a bot of confidence so i did my front pads,didn't have a plate on them so i had to put the old plates onto the new ones which of course kept slipping.It is a fairly easy thing to do folks.I wouldn't do my rear shoes thou lol a bit complicated for my liking.

@drloch6174 5 жыл бұрын

David Hart, Thanks for the PN. if SMA adds it to his Amazon Page I'll get it from them.

@ArmaSwiss 5 жыл бұрын

What is the lug stud cleaner that you use also? Wanting to expand my tool kit a bit, but havent been able to really find a good lug stud cleaner like you have?

@thenhraguy4935 5 жыл бұрын

South Main Auto Repair LLC LAST MONTH DIDN'T YOU BUST UP A SHOCK AND TURN INTO A FLAME THROWER?!?!?! NICE ROLLING FOR THE 2019 SEASON 💪.

@randycarpenter2914 5 жыл бұрын

Leave a lug nut or two on a few threads to prevent that. Toe crush time and knee.

@sanctealphonse4510 5 жыл бұрын

Good advice - or another ratchet strap from the puller to the suspension somewhere w/ a little slack.

@montestu5502 5 жыл бұрын

Randy Carpenter - Maybe 5 lug nuts based on how that rotor launched!

@hunterton4310 5 жыл бұрын

i put all on to stop more things flying

@middlecovemotors2474 5 жыл бұрын

Totally essential Leon, He scarred Mrs O pretty good.

@--_DJ_-- 5 жыл бұрын

That thing would have flattened me had I been standing there. If the puller comes out a couple nuts always go on. Doesn't help when you tear the chinesium brim off the hat though.

@twopumpsandimdone309 5 жыл бұрын

Brake cleaner was used off camera...to clean his underwear 😂

@frazerguest2864 5 жыл бұрын

No doubt. lol

@jackroe1026 5 жыл бұрын

Yeah...and we didn't get the usual loud "DONG!" either!

@boboften9952 4 жыл бұрын

LMFAO. SPOT ON .

@jameswasher3938 4 жыл бұрын

Oh gawd, I'm sitting with with tears in my eyes laughing so hard. You win BEST COMMENT AWARD!!!!

@JohnRodriguesPhotographer 3 жыл бұрын

Not sure brake clean alone would get it. Maybe a wire brush with it!

@mikeypops73 5 жыл бұрын

Cat- like reflexes, woman- like screams

@oldhvacguy8427 5 жыл бұрын

Too funny! I couldn't help it.... I LMAO. Glad it missed his toes.

@Chris-Fennimore 5 жыл бұрын

Yep, glad it missed Eric's toes, but you are right Mike.

@joebrown9621 5 жыл бұрын

😂

@albclean 5 жыл бұрын

Funny guy!

@freddybanuelos6132 4 жыл бұрын

uhh aAAHHHHhh UUHh AH uh AHHHHHH ooo MAAA GAAAT

@bryanmartinez6600 5 жыл бұрын

Ah yes safety glasses just in case a 20 pound rotor goes airborne.

@SOU6900 4 жыл бұрын

😆 my thoughts exactly

@advilshenk 3 жыл бұрын

Ya never know

@robbrobb2161 6 ай бұрын

I thought it was said in jest. On the other hand every little bit helps

@jacobs2309 5 жыл бұрын

Mrs. O was like "I'm bout to get paayyed!" But then she came out and saw you were okay... That's love my friend

@robinlance 5 жыл бұрын

Eric O, Mrs.O looked concerned like should I make him lunch or call 911......

@lackeydehackey405 5 жыл бұрын

or call the funeral home and the probate attorney

@tonygristina4860 5 жыл бұрын

@@lackeydehackey405 or the insurance policy

@estpst 5 жыл бұрын

Nah, he's still standing

@seccat 5 жыл бұрын

She’s lucky it didn’t cut off the family making hose.

@gurneyhallac8305 4 жыл бұрын

I wonder how many times Mrs O heard the words"honey bring the first aid kit will ya"

@TheDrophammer1963 5 жыл бұрын

OMG I bout pee'd my pants laughing when that rotor let loose . Classic. Made my day after a bad day at work. Thanks Eric.

@FredTheLutinoCocatiel 3 жыл бұрын

S&M Auto

@Joserocha-wm9de 3 жыл бұрын

To avoid all that , leaving a lug nut or 2 on the studs would be the best idea ... But as always great video 👌👍

@AKJeeper 5 жыл бұрын

I feel your pain, man. People in non-rust prone areas just don't understand the struggle. I've had rotors shatter when using the same puller and a big nasty. Be careful!

@arnodyck 5 жыл бұрын

I'm in the rust belt of Canada and have used the threaded holes a number of times. The trick is to do it on rotors that have 2 holes. But the bolts in and tighten them up but don't strip. Then hit with hammer. Bang rotor flies off. It won't work on that Mazda though. I've had 4 lb hammer sessions on Mazdas before. Nothing like beating a rotor for half an hour

@matts.8342 5 жыл бұрын

So the entire country?

@Pyromaniac2450 4 жыл бұрын

6lb 24" handle Wilton bash hammer. Favorite hammer in the shop. Also excellent for Explorer rear wheel bearings. Used to beat on those in 2 man teams for upwards of an hour at the last place I worked. Not even the otc hub grappler wanted to work on those

@SPAZTICCYTOPLASM 4 жыл бұрын

@@matts.8342 Nah just the parts that use salt, BC and Alberta cars look as good as new mexico because their government isn't stupid and uses beet juice and sand.

@Big_Loo 4 жыл бұрын

I learn something new about rust in every video of yours I watch.

@jakeemery9207 4 жыл бұрын

Hey, I am doing that in a driveway in NY! At least this time it isn’t February. You’ve saved my ass more times than I can remember. Always informative and entertaining!

@OGZeroLyfe 5 жыл бұрын

Brake job or Break job, SMA gets it done.

@wolfox2007 5 жыл бұрын

You're are so very lucky! I was removing the rear rotors on my GMT-800 '03 Silverado SS. I had backed off the adjusters properly past the rust ridge on the driver's side and lightly banged around with my stubby 32 Oz. sledge. While rocking it back and forth is was giving, but slowly. Crouching in and squatting as I was, I gave it the college go one last time. Oh, she gave. She gave and whanged hard off my only arthritic knee. I was sucking wind, choking back tears and rolling on my back like an upturned tortoise in my driveway for a solid 5 minutes and questioning my role in life, the Earth and the Universe as a whole. Long time watcher, long time fan - but first time poster. Brother, you're so lucky that rotor and tool didn't gut punch you in half! Hang in there bro, and stay safe. Please! You're an insightful and skilled instructor and repair tech that we all desperately pray for if we can't garage or shade-tree fix it ourselves.

@theflukey4114 3 жыл бұрын

I was struggling not to laugh while reading this at work, but i know for a fact i wouldn't be laughing if it happened to me lmao.

@toolguy40dg 4 жыл бұрын

Every brake job i do, i like to put lube on the ears of the pads, rather than dry, keeps from seizing in the future, i also lube the slide pins regardless of whats in there, love your channel, been a mechanic for 23 yrs, keep up the good stuff..👍🔧

@AndrewKidd14145 4 жыл бұрын

toolguy40dg yup, I’m the only guy in the shop that does that.

@AndrewKidd14145 4 жыл бұрын

also a little lube on the hub so the rotor won’t get too stuck eother

@eknaap8800 5 жыл бұрын

As an auto-shop teacher this happenend to my students as well. It was the same type of Mazda 6. We hammered the hell on it, lastly with a very large sledge hammer; didn't budge. I eventually heated the disc with an acetylene burner until it was cherry-red and then tried it with the sledgehammer; it did not budge....

@franknewling1139 5 жыл бұрын

I think that a couple of lug nuts, loose, would prevent that.

@EvanT1995 5 жыл бұрын

Had to watch the intro twice.... Laughed my butt off. Thanks for making my day Eric O.

@catnapwat 5 жыл бұрын

Me too, that was comedy gold

@themechanic6117 5 жыл бұрын

I love the part where he put his hand in front of it 😂😂 pure gold.

@Bikinbest Ай бұрын

Thanks for not another " Just do this and it's easy !" video, you really show how stuck they can get. Previously i gave up after one, time to try again.

@gzhang207 3 жыл бұрын

Mazda rotor revenge! Your approach is professional better than a hammer blow.

@74willy81 5 жыл бұрын

This reminds me of a similar situation I encountered when I first started to work in an automotive shop during the late 60s. Forget now exactly what kind of truck it was but the heavy cast brake drums would seize onto the axle hub. We had special large pullers just for that application and you could pre-load that sucker within an inch of it's life and beat on it all day to no avail. My dad also a mechanic should me the easy way to take it off using an O/A torch and no puller. Heat the drum up evenly and when it goes"tink" from expansion and release you can remove it by hand. That trick saved me lots of grief in the ensuing years. Love this channel, keep up the good work!

@rfcarlson1 5 жыл бұрын

I used to work on cars that had their hubs splined to the axle shaft. Had one Volvo P1800 that had max tension applied with a puller, soaked down in Kroil, heated with a OxyAcet torch and pounded on with a sledge -- all at the same time. Three of us had been working on it. Still hot and under tension we were all standing back trying to figure out what to do next when one guy just tapped it with a 10mm combination wrench like he was pointing at it and the whole assembly flew apart explosively. Just that little 'tink' did it. I can also remember a VW bus (also splined) that just wouldn't give it up. I ended up cutting the drum and hub off with a chisel.

@izzynutz2000 5 жыл бұрын

Probably the same truck I was working on

@Nick75au1 5 жыл бұрын

Internationals with the semi floating axles. been there done that

@btf2842 5 жыл бұрын

Lol i was scrolling for someone to mention a torch. Wouldve been the first thing i went for

@dylankinch2735 5 жыл бұрын

Eric I also have this tool and I had a 2014 Town And Country van on my lift. I beat the snot out of the rotor until I finally broke out this tool when it wouldn't come off. I put the OTC tool on it and put a ton of torque on it with my Milwaukee half inch impact and then hit the forcing screw with a mini sludge without the safety strap around the tool. The tool along with the rotor flew off the Hub and blasted the wall about 7 ft from where I was working the tool came apart in 3 pieces I'm lucky I was standing to the side I probably would have got blasted. The tool did not break though it just came apart as you know they do. I'm in Utica New York so I get the same stuff you do when it comes to rust and ever since that day I'm grateful to have this tool even though I don't use it very much

@dylankinch2735 5 жыл бұрын

Oh and thought id mention ive seen in your older vids people commenting that hitting the forcing screw does nothing. Well they r certainly wrong and must not be workin on cars in central ny

@Steve_I 5 жыл бұрын

cny makes working on anything a nightmare. I'm west of rome.

@mmiller1188 5 жыл бұрын

I was working with a friend in a driveway on a really stuck rotor. He tried using the caliper bracket on the knuckle and a bolt to drive off the rotor. That turned into a new knuckle. Of course the lower ball joint was stuck in it, so throw in a new lower control arm. And it had press in wheel bearings so no point in changing that over. And it was easier to just grab the strut too since it's only 3 bolts in the fender. Turned a pad and rotor slap into a front suspension rebuild! .. with junkyard parts

@phatkatracing 5 жыл бұрын

Fuckin hell dude. 😂

@bryanmartinez6600 5 жыл бұрын

Same here a broken ball joint to a new upper control arm, tie rods hub bearings since it's the Ford rotor where it has a bearing on the spindle. Left the suspension alone since the lower control arm holds the spring, I wish it was a strut.

@Folsomdsf2 5 жыл бұрын

Last time I had one this stuck, I just put a hole in the concrete under it and used a big ass prybar like a lever.

@eizzle78 4 жыл бұрын

I had one turn into new hubs, no issues getting those out but damn those rotors weren’t coming off!

@notchagrandpa8875 3 жыл бұрын

Some guys just don't know when to break out the sledge other don't know when to leave it in the corner.

@JeffWinter1 5 жыл бұрын

Baseball catchers gear required. Stand back and...Whoa!! Enjoyed as always.

@rrmech11 5 жыл бұрын

Glad my favorite guy didn't get hurt.👍👍👍

@jundialhaqiqa9907 3 жыл бұрын

When I see things like this it makes me thankful that I live in the south. If I lived up north I wouldn't be a mechanic.

@jomonpotato9180 5 жыл бұрын

You're a brave man Eric O, even experts learn new things every day.

@roccociofani4119 2 жыл бұрын

Totally my favorite? Why are near death experiences so funny? I laugh everytime!

@jimmveucasovic5791 5 жыл бұрын

"Twig and berries" LMFAO 😂

@freddybanuelos6132 4 жыл бұрын

“You think I was dead??” Just wondering when I’m getting my insurance money 💰

@dave468024 5 жыл бұрын

LMAO!!!! THAT was so funny..... I about peed my pants watching that Rotar come flying off!!!!!! I had NEVER SEEN THAT HAPPEN BEFORE......

@lorrinbarth1969 5 жыл бұрын

In 1992 I bought a Plymouth Laser. Todd Day moderated the support forum for these Mitsubishi cars - the Talon Digest. Todd wanted to replace his rotors but couldn't get them off. A friend of his had a hydraulic puller. They maxed that out to no effect. As they walked away the machine and rotor assembly embedded itself in the wall. The accepted practice in those day was to take a large chisel and cut the rotor into pie shaped pieces. These cars would even stick the wheels on to where they had to be hammered off. Fun, fun, fun.

@TheLazyCarrot 5 жыл бұрын

Whoa 😲 No CRC brake clean?

@akaltenbach 5 жыл бұрын

Yeah really, brake video without brake clean i feel let down. Although big nasty and the puller did kinda steal the show.

@Rustbox306 5 жыл бұрын

Who are you and what have you done with Eric?

@dushk0 4 жыл бұрын

I'm sure he would prefer carb cleaner for this kind of job.

@1970chevelle396 5 жыл бұрын

Even Timmy would be proud of you on that repair. He would have never been able to get that rotor off.

@ericburns5359 3 жыл бұрын

When I changed my brakes last I used some brake grease on the face of the hub after I had huge issues removing the old disks. Now I use a little Muscle Grease when I put the new ones on after cleaning the hub face. It works for me.

@leightonelliott3140 5 жыл бұрын

Glad none of your body parts were hurt. I couldn't agree more that it could have been worse. You tube wouldn't be the same without your videos👍.

@brealdeal3658 5 жыл бұрын

Not that I'm a pro like yourself but I have done many brake jobs, mostly free🙄, and I put a large puller on the rotor and torque it down some and then I hit it with the torch with a cutting tip for fast heat... usually does the Job in most cases. Love the videos and don't lose a toe! 😂

@Ivo-- 5 жыл бұрын

"I think the big event was in the first couple of minutes." - Story of my life bro.

@rubenproost2552 2 жыл бұрын

Too much information.. :s

@bullridermusic2054 4 жыл бұрын

O man I'm glad to see that I'm not the only one having fun with mazdas. I did full brake job on my 2011 Mazdaspeed3 and had a fun day slamming a hammer as hard as I could trying to get the rotors off. I could not believe how seized the rotors were to the hub, unbelievable how much of death grip those things have to the hub.

@trevonbates6703 3 жыл бұрын

@9:58 made me laugh so much, the sense of humor is amazing 😂

@vivillager 5 жыл бұрын

Does it help any if you barely put a lug nut on there?

@SouthMainAuto 5 жыл бұрын

Hind sight is always 20/20 :)

@johnferguson7235 5 жыл бұрын

@@SouthMainAuto Live and learn, what doesn't kill ya only makes you stronger. No surrender and NO PRISONERS. That's the last time you make that mistake.

@isellfoodstampz 5 жыл бұрын

Maybe that's why they don't include a strap to attach it to the car. I would've done the same thing as Eric. I didn't think about it either.

@zacharyaleksovski9746 5 жыл бұрын

In my experience, what doesn't kill you tends to just piss you off.

@manuelsalvatierra2940 5 жыл бұрын

Man, if this wasn't an SMA video, a lot of comments would be eating inside and out the mechanic for not putting a few lug nuts on,

@downhillskier7 3 жыл бұрын

Comedy when rotor puller or gear puller used on brake rotor or hub, stand back and stand by when rotor or hub goes flying 😂

@paulb5284 5 жыл бұрын

Crazy rotor jumping, wow glad your ok.

@davidgarbersr.8065 3 жыл бұрын

Auto mechanic for 38 years. Wore out my back and leg. Can only play 18 holes 3 times a week now. It's tough getting up at 10 in the morning these days😀

@wyattoneable 5 жыл бұрын

I've never seen a brake rotor turn into a guillotine so fast. I'll be watching my toes if I get into that mess. It was fun to watch though.

@LogiForce86 5 жыл бұрын

Next time either wear steel boots or I can recommend Dutch Clogs, which believe it or not are considered the high grade of safety shoes just like the steel ones. Although it might look a bit silly with clogs in the workshop. lol

@dushk0 4 жыл бұрын

or just use a nylon strap to catch the rotor hanging on the lower arm

@williamreitinger8898 5 жыл бұрын

Love action packed repair tutorials

@gary6058 2 жыл бұрын

I had a wheel bearing did that to me. Luckily after I put the pulley on I had stepped away to take a break. That thing flew a few miles away. Legend has it, its still flying. Happy to see you weren't hurt

@mysock351C 5 жыл бұрын

That rotor popping off was priceless. Sure it wasn't for Eric, but it was entertaining.

@johneaston4963 5 жыл бұрын

Now that was a brake job worth watching,,😁😁

@zx8401ztv 5 жыл бұрын

Bloody hell!!, you nearly got a smack in the love spuds :-D You need a danger bucket with a hole in the bottom, fit the bucket over the rotor and extractor, clip the handle to the suspension strut. ' The Danger Bucket ' Only 19.95 At all good stores, bad ones too :-D

@alabama7636 5 жыл бұрын

zx8401ztv I hope your happy now I’m going to paint “ danger bucket “ on a bucket and bring it to the shop. 😂😂😂😂😂

@asaprulers226 4 жыл бұрын

All mechanics that actually know what they are doing all talk in some funny ways. My teacher was the same hilarious in the shop

@timmykelly4508 4 жыл бұрын

I actually jumped in my chair when that rotor popped off. lol glad your okay.

@davidh7339 5 жыл бұрын

Hi Eric, would keeping one or two of the lugnuts attached to the studs during the pulling process prevent the rotor from flying off next time?

@PhantomGraff 5 жыл бұрын

Last one I did, that was that stuck, I broke the hat from the friction surface. I'll be damned if that wasnt the first 2 piece rotor I made on a ford fusion.

@fascistpedant758 5 жыл бұрын

I've seen that once too. Imagine the beating the bearing takes!

@michaspi 5 жыл бұрын

you build it we destroy it This is what happens to the rotor when all the service garage guys do is pad slaps on the trucks.

@williamgiampa4783 5 жыл бұрын

ERIC, YOU ARE 1 OF THE BEST MECHANICS I HAVE EVER SEEN!!! I CANNOT BELIEVE YOU DID NOT INSTALL A COUPLE LUGS NUTS JUST IN CASE? ROOKIE MISTAKE. YOU ARE STILL A BEAST THOUGH!

@marty0715yt 5 жыл бұрын

Stuck like "White on Rice" is what I believe you were searching for! Carry on Mr. O . Always a hoot at SMA!!!! Too bad Hanna didn't get to see that!!

@zigner 5 жыл бұрын

To enhance viewing pleasure, Jump to 3:05, Pause, Click the settings gear on the bottom right, Click "Speed" - change to 0.25, Play, Enjoy with Volume on. Reply with how many times you watched!

@another640 3 жыл бұрын

like a sound from hell ))

@a-lineaficionado1000 3 жыл бұрын

Too many 😂 “ohhhhhhhh it cuttt theee hossseeeeee”

@joewwilliams 2 жыл бұрын

@@a-lineaficionado1000 went back to watch. I'm dyin dude

@rubeng5150 5 жыл бұрын

Pucker Factor lvl 100 holy cow!

@S0m3thingOrAn0th3r 4 жыл бұрын

Made my day. Who knew disc brakes were an extreme sport?

@alabama7636 5 жыл бұрын

“The safety strap” is my new CB handle. I live in the south and didn’t know there was a tool to remove rotors, thanks for the great video.

@michaelrivera652 5 жыл бұрын

Your now officially a stunt man lol.

@JohnSmith-mk8hz 5 жыл бұрын

Those brakes can be restored to like new condition, your underwear can't.

@fascistpedant758 5 жыл бұрын

Are underwear covered by OSHA?

@LynnWrayDillard 5 жыл бұрын

Great comment, now all of Eric O’s viewers are going to sending him underwear. He may be a Duluth kind of guy but, me personally, I do not give other dudes underwear.

@fascistpedant758 5 жыл бұрын

I have a few relatively new boxers I could send him. Do you think he's more the roaring tiger or pink bunny type?

@timothybarney7257 5 жыл бұрын

@@fascistpedant758 I believe those would fall under NYSDEC or the EPA.

@SmittySmithsonite 5 жыл бұрын

@@timothybarney7257 - In MA, going without underwear is illegal ... due to excessive emissions ... 😷

@thomasbergman442 5 жыл бұрын

OMG, I must have rewind that part where is the brake rotor explodes off like 4 times!! I laughed so hard I blew tears!!

@jmabs5096 3 жыл бұрын

0:08 legend has it that brake rotors is still flying through the space time continuem to this day!

@7daystodieyeahbuddy919 5 жыл бұрын

GREAT way to start any day..... Drink some coffee, huff some Brake Cleaner and watch BIGG NaStY rip apart some brake rotors SMA style. 💖💖💖

@LDReptiles 5 жыл бұрын

Dont feel bad Eric I had a Mazda 6 2 years ago come in the same deal brakes. Well brakes turned into a wheel bearing, lower control arm, brakes and a new axle. Couldent get the rotor off called the customer and got approval to continue to smash it off with a hammer. Ended up splitting the rotor in two with a 12lb hammer and 4 hours of swinging. So get the rotor off go to pull the axle out seized In the bearing. Go to remove the lower ball joint of of the knuckle seized like a mother. Took me two days to do front brakes a wheel nearing an axle and a ball joint

@Georgiaboy9009 2 жыл бұрын

48hrs to complete total job on a Mazda6? Hell that's not too far off book time right? Lol not bashing you, though I reap the auto repair benefits of living down south, I have experienced way more Rustbelt native vehicles then I'd care to have. Over recent years instead of landing in the crusher, northern vehicles have been making their way down south through used dealer auctions where state inspection laws are more lenient. Used to be I could quote jobs over the phone without a second thought, now after experiencing similar situations as you mentioned I've learned to not even give a ballpark estimate without first seeing the car. Luckily thanks to Eric O and his videos I am now better equipped and more knowledgeable on how to combat these situations, making me one of only a small few in my area willing/capable to take in these repairs.

@howtobebasic2122 4 жыл бұрын

3:13 POP goes the brake rotor XD

@soil-aint-dirt4903 4 жыл бұрын

...really enjoy watching your vids, Eric. Good times 👍🏼

@apexkeeper 5 жыл бұрын

Glad you didn't get hurt! but that was hilarious... The first time I removed an old set of dayton truck wheels the first one flew off and knocked me on my butt. I learned very quick to leave the nuts partially on the studs!

@scottfirman 5 жыл бұрын

I had to CUT the rotor on a 1978 Chevy Nova in pieces. It didnt matter what I did. I tried EVERYTHING humanly possible. In the end, I used a cut off wheel and cut from the stud to the outside edge. I had to make it into pie wedges and EVERY WEDGE was STUCK . It was my first experience with a frozen on brake rotor. What a joke! I learned after that USE ANTI SEIZE . Period.

@sn99cobra 5 жыл бұрын

Doing a brake job on my Madza 3 with 160k miles on the factory hardware running in the rust belt took a sledgehammer to shatter the rotor off. I feel your pain.

@marcusbland4180 4 жыл бұрын

WHOOOOOAAAA!!!! Glad it missed ya!! And thanks for all the links to great tools & supplies!!

@belowme4927 5 жыл бұрын

ISN'T THE SAFETY STRAP SUPPOSE TO GO AROUND THE BACK OF THE ROTOR?

@snoopdogie187 3 жыл бұрын

No, look at their amazon pictures, they do it the exact way he did it. The job of the strap is to prevent the arms from spreading under load. A lug nut that is threaded on will prevent the rotor from flying (which they also have in their picture). Even if the strap went behind the rotor, the whole assembly can come flying off, like it did here.

@DRWebster93 5 жыл бұрын

An SMA brake replacement video with NO BRAKE CLEANER?

@joses7474 5 жыл бұрын

That's how traumatic the experience was he forgot about it lol

@markchidester6239 5 жыл бұрын

Yea, what's up with that?

@--_DJ_-- 5 жыл бұрын

That is the beauty of the coated rotors as long as you keep your grubby mitts off them.

@bizbot1655 5 жыл бұрын

The KZfaq suits told him to curtail the use of brake cleaner due to harm to rust. Rust is a protected species in some parts.

@colemichael7409 5 жыл бұрын

He used it all on his underwear

@booneautomotive4174 5 жыл бұрын

Glad you didn't get hurt, and thanks for sharing the nasty side of what goes on in maintenance and repair. Too many folks think everything is easy

@FamousByFamily 5 жыл бұрын

looks like you gave it the beans and it gave it straight back :0 i really don't mean to take joy in your painful moment but i really enjoyed your comedy and making fun of the situation. you've really got a unique way of making content for youtube unlike any other channel. i recently got let go from a workshop so i really needed this today. thanks :)

@99dsm1 4 жыл бұрын

I had this happen 1 time. I thread on lug nuts on at 3 studs to catch it now.

@stevenhzoll7057 5 жыл бұрын

Ah yes , reminds me of the old days pressing Cat D 9 sprockets off. Make sure to put the big nut back on with about a quarter inch gap. Don't ask me how I know.

@Big_Loo 4 жыл бұрын

How far did it go?

@dushk0 4 жыл бұрын

@@Big_Loo this far, and it was thaaat scary

@mathehack1 5 жыл бұрын

This makes me glad I live down south and our rotors don't get rust welded do bad. I grease up my mating surface to prevent this from happening. I've just started putting lock tight on stuff that shouldn't come apart and grease on stuff that should.

@michaelb.5345 5 жыл бұрын

It happened but you as always will prevail Dr. E.O.

@paisleyprince5280 5 жыл бұрын

I leave a few loose lug nuts on for that very reason

@riverrat1149 5 жыл бұрын

That does not make good tv!

@rick_. 5 жыл бұрын

Probably says as much in the instructions. Nuts to keep the rotor from flying, safety strap to keep the puller flinging off of the rotor.

@alabama7636 5 жыл бұрын

Paisley Prince A few loose lug nuts are all some of us have left, don’t take that away 😂😂😂😂

@chrisstoddard1144 5 жыл бұрын

I have to admit, I've always envied how easily the rotors come off on your jobs. Took me 3 days to pull the 13 year old rotors off of our Mountaineer a few years back.

@inhocsigno9151 5 жыл бұрын

That's a big scary! Never had my work jump back at me.

@HunterShows 5 жыл бұрын

Brain Surgeon: "Ah, shit." ... Brain Surgeon: "Not again!"

@westtexas501 5 жыл бұрын

Brah !! Your not using the little hole to remove rotors !! That's why your having such a hard time !!

@melias67 5 жыл бұрын

WEStTEXAs yeah it’s all fine until the bolt snaps off in there lol

@raymonddey7403 5 жыл бұрын

In the rust belt that's alot easier said than done.

@raymonddey7403 5 жыл бұрын

The amount of rust falling off the rotor when big nasty was hammering away was nuts

@mikeschiavoni5973 4 жыл бұрын

I got a mazda 6, the 10mm hole will do nothing but get one more thing stuck. I do not know why the rotors stick on like they do on mazda 6's but they certainly do.....but only the first change.

@pyro323 4 жыл бұрын

That might work in Texas but not in NY state.

@chocolate_squiggle 3 жыл бұрын

Far out! Super glad you're okay. Was amazing to see that thing launch itself off though, I never imagined something like that was possible.

@lexustech48 5 жыл бұрын

Mr. O, Im a professional tech of nearly 15 years. See my name for the brand Ive been with since I started. You sir, and your brothers and sisters in the rust belt are literally my heros. I dont know if Id have the stones or desire to make it a career with as much corrosion as you guys encounter daily in all seasons. My professional hero for sure!

@bengittus1836 5 жыл бұрын

“Just remember viewers, if I can’t get the rotor off, you can’t get the rotor off!

@dB_944 5 жыл бұрын

Isn’t that how goalies train in Canada?!

@kevingallineauii9353 5 жыл бұрын

Yay, Fluid Film. I finally picked up (found locally) a can myself. Can't wait to spray it on one of the hubs on my cars!

@tinman9341 5 жыл бұрын

Wow!!! That was a heck of an intro!!!!

@GeneralRELee 5 жыл бұрын

I should send Mr O. a nice pair of earmuffs, his ears will thank me when he's 70.

@THEtechknight 5 жыл бұрын

Sounds like a good time to do a compilation, a bloopers reel :-)

@comingundone27 5 жыл бұрын

I love those hoses. I switched all mine in my shop to them. So far so good!

@ryanrohauer5940 4 жыл бұрын

I live in buffalo and I love this channel because you live my reality. Everyone in California changing parts thinking they are good. If said. Million times if you can be a mechanic up here you can do it any where thoes southern sally's dont even know what a torch is