No video

Ford Flex With A Bad Flex!?

  Рет қаралды 125,214

South Main Auto LLC

South Main Auto LLC

Күн бұрын

I am getting exhausted with the flex puns on this one but it's time to flex some creativity and save this lady some money on replacing the front pipe. At any rate come along as I swap out a broken flex pipe on a 2019 Ford Flex.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
The South Main Auto Amazon Store:
www.amazon.com...
AES Wave Automotive Diagnostic Tools: www.aeswave.co...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 816
@ronaldclark1178
@ronaldclark1178 Жыл бұрын
Eric, I have been welding exhaust pipes for over 50 years and have seen several PROFESSIONAL WELDERS that couldn't weld exhaust pipes. If it holds and doesn't leak, it's good. Great job as usual!!
@sawtooth4615
@sawtooth4615 Жыл бұрын
When I got my first car in the early 60s, it was a six cylinder. So of course I had to have the manifold split so it sounded better. From there I welded the second pipe from the manifold on out. Dad had a stick welder but I brazed everything and yes, there were many cracks and broken welds. But that's what made it fun............... lol
@Boodieman72
@Boodieman72 Жыл бұрын
To be fair, pipe welding is a specialized skill.
@jormalonnberg1578
@jormalonnberg1578 Жыл бұрын
@@Boodieman72 Yeah, if you weld highpressure pipes, gas or liquid, but exhaust no, if you get it not leaking and not looking as porcupine it is ok on old exhaust pipe.
@kenj.8897
@kenj.8897 Жыл бұрын
That sawzall blade has 48 more cuts in it
@molokoplus3
@molokoplus3 Жыл бұрын
How about the slag down your shirt? You just laid some knowledge brother.
@freetolook3727
@freetolook3727 Жыл бұрын
For being a self described rank amateur, that weld job looked pretty professional to me! 😂😂
@shadetreemech290
@shadetreemech290 Жыл бұрын
Yeah, me too.
@jimskinner2777
@jimskinner2777 Жыл бұрын
I think he is just a modest person. He is so talented and very very smart. I love watching him diagnose electrical systems he is so methodical, but he will tell you he is no professional.
@ohioyodertoter6827
@ohioyodertoter6827 Жыл бұрын
Such a Chevy hater 🙉🙈😡
@BarkingDog-ho6el
@BarkingDog-ho6el Жыл бұрын
If you are getting paid for it and it works, that makes you a professional in my book too.
@missulu
@missulu Жыл бұрын
Back before I was a welder, and I was an exhaustologist, specializing in rust growth, the one thing I would do differently is just have you do it!lol!
@jefferp
@jefferp Жыл бұрын
My professional opinion is Eric O is an expert at MIG welding old heat cycled rusty metal to new metal. Good job!
@parochial2356
@parochial2356 Жыл бұрын
I wouldn't be surprised if Eric has a side hustle inspecting and certifying welds at nuclear power plants, just too humble to admit it.
@jamram9924
@jamram9924 Жыл бұрын
@@parochial2356 He did with Nasa and their Space Shuttle program. He was forced to retire after the fleet was retired.
@parochial2356
@parochial2356 Жыл бұрын
@@jamram9924 Yeah, that's when he sent a job application to the U.S. Nuclear Regulatory Commission.
@denniswelch6005
@denniswelch6005 Жыл бұрын
Let me say this about good small family owned repair shops. I had a similar issue and chain muffler shops say”Cat back” every time.$1000-$1300 I took it to a small shop. In and out in 2 hours with a piece of pipe welded in and $120.00 cost Thanks SMA and all the shops like you.
@Jazzyj69
@Jazzyj69 Жыл бұрын
Your welding machine was set very close. (Voltage and amperage) Just hearing how your machine was running tells most of the story (being a welder myself). Looks like you did a great job with the exhaust pipe. I wish I had a garage with a lift in it 😢. But keep up the great work you do and keep the videos coming. Stay safe (you and your family) 🙏
@splice247
@splice247 Жыл бұрын
I've been a local 196 pipe fitter for 187 years, and self proclaimed exhaust expert of the year 10 years running, what a hack
@PhillyDee215
@PhillyDee215 Жыл бұрын
I remember the episode when Eric 1st showed us that welder.....one of thee best welders at the time and still is
@truthsmiles
@truthsmiles Жыл бұрын
What is it? A flux core?
@agostinodibella9939
@agostinodibella9939 Жыл бұрын
Nice job Eric! I always enjoy videos like this where you can save the customer money and get a little more life out of these vehicles.
@parochial2356
@parochial2356 Жыл бұрын
Yes, and make a small, reasonable profit. A win-win situation.
@shawn_530
@shawn_530 Жыл бұрын
Thanks to the SMA channel I now find myself shouting “CHEVY THUNDER!” whenever a particularly loud vehicle passes by…
@jonbingham3595
@jonbingham3595 Жыл бұрын
I LOVE YOU BROTHER. I USUALLY DON'T COMMENT I JUST ENJOY YOU'RE VIDEOS. I'M AN OLD MECHANIC TRYING TO KEEP UP TO WORK ON MY OWN VEHICLE. THINGS CHANCGE SO FAST AND I'VE BEEN OUT OF THE INDUSTRY FOR 20 YEARS BECAUSE I'M DISABLED AND CAN NOLONGER DO WHAT I LOVE. I WAS IN MY TIME 1BOF THE BEST DIAGNOSIS TECH. HOW TIME FLIES. JUST YESTERDAY I WAS 16, NOW I'M PUSHING 60! CRAZY. GOD BLESS YOU MY BROTHER AND THANK YOU FOR WHAT YOU DO FOR US.
@paulaconnaghan1626
@paulaconnaghan1626 Жыл бұрын
Having grow up in Midwest and being a mechanic I don’t miss the rust . Moved to west coast in 1976 and the couldn’t believe how long vehicles live rust free. Great vids and long live the automotive repair professionals.
@dustcommander100
@dustcommander100 Жыл бұрын
That MIG welder sounded like it was set up exactly perfect. From what I could see of the welds, they were beautiful. I would have trouble being humble if I could do what you do, but I see that I need to remain humble. Very humble.
@anthonysimonhough9691
@anthonysimonhough9691 Жыл бұрын
Well done , you saved the woman heaps of money by being a good service person , keep up the great work . Thanks for the movie.
@davidshellhaas1730
@davidshellhaas1730 Жыл бұрын
Love all your disclaimers on the welding and it is such a shame you have to. Thanks for another great video Eric
@shadetreemech290
@shadetreemech290 Жыл бұрын
Ditto!
@Blasterxp
@Blasterxp Жыл бұрын
I think, no need
@MazichMusic
@MazichMusic Жыл бұрын
Viewers on YT tend to be critical of the content creators.
@vg3430
@vg3430 Жыл бұрын
He doesn’t have to…he does it because he knows it will actually increase comments (just like the ones you a I made) which in turn generates revenue.
@MichaelSmith-dg1fb
@MichaelSmith-dg1fb Жыл бұрын
It's better to be good at everything, than great at one thing. And you seem to be good at what you do. Honest mechanic and you help people who know nothing about what they drive. People don't buy cars because they know how to fix them. If I lived up there near you, the dealer would only see my taillights as I drove off. Never to touch my car again. You are a rare breed .
@glennbarker222
@glennbarker222 Жыл бұрын
Those welds weren't too shabby in the end. And they didn't seem to be leaking, so all is good and you saved the customer a bit of cash. Nice job.
@deziking
@deziking Жыл бұрын
it was actually pretty impressive. Good shit .
@bombardier3qtrlbpsi
@bombardier3qtrlbpsi Жыл бұрын
My professional opinion for SMA is. You saved the customer some (alot) money!
@barrygordon5223
@barrygordon5223 Жыл бұрын
Great repair job Eric! Nice for your neighborhood to know that they have an honest garage owner that will take the initiative to save them some money and not take them to the cleaners. Awesome! 👍😁
@rogereastman3187
@rogereastman3187 Жыл бұрын
My professional opinion is..... You just screwed Ford out of a bunch of money, that Ford was going to screw your customer out of. You are the modern Robin Hood mechanic. We, the great unwashed public, are very grateful for your services!
@dailydriver8280
@dailydriver8280 Жыл бұрын
Another sighting of that rare, seldom-seen breed. An honest mechanic that does stellar work. Great work, Mr.O. Already looking forward to the next one.
@greggc8088
@greggc8088 Жыл бұрын
I'm sure your customers appreciate your ability to do just about any job they have need of. Good work!
@Treeves30
@Treeves30 Жыл бұрын
As Derek at VGG says, "If it works, is it wrong?". Fantastic fix/solution to save the lady from what the stealership or muffler place would have cost since they would just have hung some new parts on the car.
@DirectCurrent4u
@DirectCurrent4u Жыл бұрын
That weld was much better the the weld that my local (Route 66 Muffler) did on my Cat Back exhaust system on my Cummins! Keep up the great work Eric and don't let anybody tell you you're not a good welder!🙏🏻👍
@williamsanders6092
@williamsanders6092 Жыл бұрын
Eric you amaze me with the knowledge and skill you apply in repairing existing parts. Your skill is unmatched in automotive repair.
@4englishlies875
@4englishlies875 Жыл бұрын
As a non professional welder myself( no experience) I think you did a heck of a job.😊
@randybeard6040
@randybeard6040 Жыл бұрын
Seeing Eric Weld the Exhaust Pipe Brings me Back to the Old Days when we used a Coat Hanger and a Torch to Braze Exhaust Pipe Conn. Together--it would still work but the New Coat Hangers generally have to much anti-rust coatings on them...
@shanehaskins8347
@shanehaskins8347 Жыл бұрын
Eric I retired after 40 years of being a welder in the welding trade. Everything from CWB to Tssa certification.(Canada) Trust me, with your minimum trade knowledge you are better than most trade welders. Don't worry about the arm chair quarterbacks, no explanation necessary.
@nonyabiz2777
@nonyabiz2777 Жыл бұрын
Nice work. I’m sure we have all see the professionals at the local muffler shop do really horrible work. Bravo sir.
@nonyabiz2777
@nonyabiz2777 Жыл бұрын
@Pete N same here. I just have my boys weld anything I need now. Hope they got it right the second time.
@warplanes
@warplanes Жыл бұрын
As long as its sealed and holds together for the useful life of the exhaust, that's the level of weld we're aiming for. 😊
@dmakk861
@dmakk861 Жыл бұрын
In a few years up in the rust belt, ma'am all we could salvage from the exhaust is the flex pipe beautifully welded.
@jamesbruno5896
@jamesbruno5896 Жыл бұрын
Great welding excellent repair!
@mitchmerle5774
@mitchmerle5774 Жыл бұрын
After watching this channel for a year I am fully convinced this guy can do it all. These videos have to contribute to a nice increase in business for him. It’s well deserved. Thanks Eric and Mrs O.
@boblynch7348
@boblynch7348 Жыл бұрын
I applaud a man who knows how to set his mig machine for a proper "short arc" weld.
@williamwood6531
@williamwood6531 Жыл бұрын
You did a good job and very reasonable for your customer! Well done Eric O!
@milwaukeeroadjim9253
@milwaukeeroadjim9253 Жыл бұрын
Save the customer money and they will come back. Thanks Eric and Mrs O
@jafo461
@jafo461 Жыл бұрын
Anyone that’s ever sawzall’d with a long blade knows you were working sharper end. I love that pipe expander. You have all the cool tools. Cheers.
@ladamurni
@ladamurni Жыл бұрын
If I could weld only half as good as you just did, I would be very happy!
@funnypranker34
@funnypranker34 Жыл бұрын
Welds look beautiful Eric. Also I’m quite shocked that a 4 year old vehicle already needs exhaust work. My 1990 bmw’s exhaust only had just a couple holes in it after 30 years. It’s been fixed now but even the original flex pipes are still holding up. They leak a bit but it’s still quiet and that car was in Chicago all it’s life.
@ohdeerme
@ohdeerme Жыл бұрын
Eric - Professional job again. In the future use this "Disclaimer" - I'm not a professional welder but I do play one on KZfaq. - As per the welder's comment & mine you now are KZfaq certified by us both !!!
@irvinmyers5731
@irvinmyers5731 11 ай бұрын
I’ve been welding high pressure pipe and welding platforms offshore in the Gulf of Mexico and I think you’re a very good welder so don’t knock your skills. You’re the man
@robhunter2435
@robhunter2435 Жыл бұрын
Nice welding job! Looks very professional
@80SWoods
@80SWoods Жыл бұрын
I have to say, it’s nice to see a mechanic still using old school pneumatic tools when so many have switched to electric.
@raynetorrin
@raynetorrin Жыл бұрын
WHAT???? I CANT HEAR YOU! DID YOU SAY SOMETHING?
@80SWoods
@80SWoods Жыл бұрын
@@raynetorrin HAHAHA!!
@SouthMainAuto
@SouthMainAuto Жыл бұрын
Yeah all these other guys in their big clickity clacky battery tools. Granted I have several but you just can't beat air at the end of the day 👍
@aldonco
@aldonco Жыл бұрын
I still prefer air tools over electric. I don't want to be a slave to batteries.
@richardluce775
@richardluce775 Жыл бұрын
That extra double tap on trigger when your done is almost well………..
@williamschmitz971
@williamschmitz971 Жыл бұрын
Wish we had a mechanic near us that is genuinely good towards their customers! Ours are all about upselling!
@archibaldgeorge8916
@archibaldgeorge8916 Жыл бұрын
you weld better than some the guys who worked with me over the years
@leopage2728
@leopage2728 Жыл бұрын
After 40+ years of welding, starting out with stick Welders and ending up running laser welders. I say you did a fine job there buddy. Enjoy your videos.
@palladini9718
@palladini9718 Жыл бұрын
We once had Ford Escape that needed the flex pipe replaced, so go to Speedy Muffler, and they told they do not do that, but they did tell us about a place who does. So we go there, and it is an Industrial strip mall, he takes our car in, we wait outside (it was summertime), and 30 minutes later we had the vehicle back, fixed!
@jeffsimonar7161
@jeffsimonar7161 Жыл бұрын
I am a professional welder, and it looks great from my chair. Good job, Eric.👍🏼
@trekOCLVone
@trekOCLVone Жыл бұрын
I like your low tech repairs - no wild parts cannon action ! Good job sir !
@bigsparky8888
@bigsparky8888 Жыл бұрын
WELDING...YOU ARE A MASTER TECH...MULTI FACETED!!!!
@jimbriggs70
@jimbriggs70 Жыл бұрын
Do love your comments on the products and why you use the parts you use. It keeps me from wondering why you went with what I consider lower quality components. And I hope you understand that your videos is a large reason for my attitude. I used to think cheapest is " more gooder " but at 76 years of age I have developed the mindset of thinking . "I WANT TO INSTALL THE PART THAT LAST THE LONGEST OR AT LEAST AS LONG AS I DO " and damn the cost. I have become lazy in my old age.
@garysgarage3669
@garysgarage3669 Жыл бұрын
I bet nobody ever leaves any negative comments about your torching skills. You weld 199 times better than me.
@stevenpetty1694
@stevenpetty1694 Жыл бұрын
Mr. O excellent repair 👍
@ryanwaltos2206
@ryanwaltos2206 Жыл бұрын
Had the exhaust rot in the split in my old Subaru Outbacks. Dropped the whole pipe systems from the front junctions, did a complete weld and fill. I put a flat top piece of heavy metal on the top of the Wye to keep salt belt rust maker water from collecting there and rotting again. Held for a few years until i sold the car.
@miketeeveedub5779
@miketeeveedub5779 Жыл бұрын
If it wasn't for "bird turds" or "Booger welds" I'd have no welds at all. I gotta stop using flux core MIG wire and buy some damn CO2/Argon tanks already - those welds were beautiful! Cheers Mr. O!
@mikeberry304
@mikeberry304 Жыл бұрын
Nice one Eric , you just saved your customer a load of money and done another great repair , well done
@whoak302
@whoak302 Жыл бұрын
You're welding disclaimer had me rolling 😂
@shadetreemech290
@shadetreemech290 Жыл бұрын
Yeah, you could just see where he was coming from.
@mikeroup2721
@mikeroup2721 Жыл бұрын
Nice job as usual. I've done this before but with a flux core welder and no lift (laying on my back). I don't have a good pipe expander so I use a hammer to close the pipe gap! Not much fun but it saved my family a lot of money over the years.
@RideAcrossTheRiver
@RideAcrossTheRiver Жыл бұрын
For those who have an older Ford with V-engine, check those bolts at the forward manifold where it connects to the Y-pipe. Those bolts-nuts are exposed to road crud and can rot out to cause a disconnection.
@colin4850
@colin4850 Жыл бұрын
Nothing wrong with that welding Mr O , you can weld my pipes up anytime 👍👍👍
@htownblue11
@htownblue11 Жыл бұрын
Eric O….American hero, entertainer, electric glue artist….amongst other labels on his extensive resume. Hope his town makes a statue in the town square of him, bought and paid for by Napa of course.
@FishFind3000
@FishFind3000 Жыл бұрын
Funny enough my f150 with the 3.5 ecoboost broke is flex pipe2 days ago. The fix from ford is replace the flex and muffler as it’s one whole piece. But it’s in back order… so $60 from autozone for a new one and a coupler and I’m back in business.
@davidzelkowski9948
@davidzelkowski9948 Жыл бұрын
I would say that was an excellent application of the hot metal glue gun. Well done Eric!!!
@johnpenwell6402
@johnpenwell6402 Жыл бұрын
“It’s already broke we can’t make it any worse… well technically we could let’s be honest” exactly why any DIY repair I’ve done I considered a success if the car works no worse than when I started.
@eltonyancey6426
@eltonyancey6426 Жыл бұрын
I love how you save customers money whenever you can.
@hamishr2367
@hamishr2367 Жыл бұрын
Awesome that you actually try to save the customer some expense....very nicely done
@raymondstucker1609
@raymondstucker1609 Жыл бұрын
Eric u had that machine set up perfect. I always listen to the sound when welding. Thanks for sharing
@vanceblosser2155
@vanceblosser2155 Жыл бұрын
I have a 1999 Chevy Tahoe that I bought used in 2011. About 6 months later a brake line ruptured and I took it to the dealer for replacement. Part of their service is they inspect the vehicle for other issues, and there was a flag on the exhaust system warning that it was going to fail soon. It was still tight and a visual inspection didn't reveal any corrosion so I basically filed the comment. Now it's 2023 and that exhaust is still on there, no leaks. Part of that is we don't have as much snow in Virginia as you do but it's been our winter vehicle since it was purchased so it has been exposed to some salt in the winter. Now if they had only done as good of a job on the bumpers.....
@even7steven
@even7steven Жыл бұрын
If your saw blade is dull, just use the backside of it to finish your cut. Lol
@bill8by5
@bill8by5 Жыл бұрын
Eric, for the past 40 years, I've welded my share of things, exhaust, tinwork, aluminum, pipes, etc. You did a very nice job on this, regardless of what others may say. You go through all positions on one of these and from what the camera shows, you nailed it all up - it won't leak and the weldments look fine. It was a great help to clean the parent metal of rust before you started welding. That FeO2 makes for horrible welds. Since I live in Texas on the Gulf, I call it Gulf Coast Ferronoma - or, Rust Cancer due to location. Much like you experience in the PRNY. Hahahaha. Keep up the great work and making fine videos.
@mikevonkleist6767
@mikevonkleist6767 Жыл бұрын
Different video but may I share this observation. I've been at this for 40 years and when ever I watch you work it inspires me to go more and to do more. You offer us good times and rewarding results. Make our customers trust us. Eric, you the best. On behalf of all pro techs, we thank you.
@craigstubbs1991
@craigstubbs1991 Жыл бұрын
"I am not a welder'" Bull. You did a great job. Have you seen Rainman Ray use a welder or a torch? Now, HE scares me.
@stevenm3141
@stevenm3141 Жыл бұрын
Eric O. You are already hired to do any welding necessary! No questions asked!
@dougjones9493
@dougjones9493 Жыл бұрын
Eric, my time we used a stick welder and had to bend the rod to weld on top
@gerryboard6615
@gerryboard6615 Жыл бұрын
A good honest repair from a good honest shop owner. Another opportunity missed to pull someone's pants down over the price !!
@cfmcguire
@cfmcguire Жыл бұрын
Looks a hell of a lot better than soup cans and hose clamps on my 62 Ford Fairlane. Mission accomplished Mr. O.
@dano336
@dano336 Жыл бұрын
wow!! I was just remembering 65 ford van ..50 miles away in binghamton..early 70's green bean cans cut out both sides ... tin snips hose clamps ...fixed!
@wingman8447
@wingman8447 Жыл бұрын
Nice work. More than good enough. Thank you.
@sidvis7235
@sidvis7235 Жыл бұрын
You may not be a 'professional' welder, Eric, but that's some of the best pipe welds I've seen! 😊
@billmartin4602
@billmartin4602 Жыл бұрын
Good job Mr. O I’m not a welder but I can stick metal together, well that’s what I tell my friends.
@Radar8717
@Radar8717 Жыл бұрын
Many times when the shop was poor I’ve used thick metal coat hangers as brazing rods and done clean work.
@robstar293
@robstar293 Жыл бұрын
Love the disclaimer on welding, not going to the moon etc. Thanks for giving me a good laugh.
@kens.3729
@kens.3729 Жыл бұрын
NO Job is Too Difficult for Eric at South Main Auto. 👍🙏
@scottnusser6232
@scottnusser6232 Жыл бұрын
On the loose ends some times I cut a piece off a scrap pipe,about 1/2" wide, then slice the "bushing" piece to wrap tight around the pipe to take up gap before welding. Like you said expanding rusted pipe weakens it even more by stretching the metal that's there. The bushing method also helps to keep from blowing thru when welding already weak rusty pipe. Hope that's helpful😅
@kevinkoepke8311
@kevinkoepke8311 Жыл бұрын
Another first! I've never seen a drive shaft and exhaust follow the same path. Thanks Eric!
@yhird
@yhird Жыл бұрын
Great welding work Eric. Cheers.
@AaronBelknap
@AaronBelknap Жыл бұрын
You know as an OLDER GM lover, I was happy to see a Ford in the shop. Alas, just rusty exhaust! I think those welds turned out great. Too bad about the salt belt some nice cars getting wasted from rust! Mom’s old 2010 Escape 2wd still looks new underneath! Now if that 4 banger had some power it’d be nice!
@gerardbungay9896
@gerardbungay9896 Жыл бұрын
Great work as always. I'm a DIYer for over 40 years and love you methodology on troubleshooting. My only advice is hearing protection around air tools. If you don't already use it now. It's a sneaky hearing killer. I learn a lot from your channel
@vic745
@vic745 Жыл бұрын
Looks awesome way better than some repairs I've seen
@pophamlarry
@pophamlarry Жыл бұрын
You never cease to amaze Eric.. Very impressive idea...😊
@gadnur
@gadnur Жыл бұрын
I had a 2016 Ford Flex. I had the flex pipe replaced twice during the time I owned it. Ford dealership wanted $1500 to replace the entire pipe assembly. Replacing the flex pipe by a local exhaust shop was around $100.
@jonclassical5710
@jonclassical5710 Жыл бұрын
Love some cold steel work in the morning! Great idea, loved it!
@GetReal3327
@GetReal3327 Жыл бұрын
Great job Eric, you can only do what is right for what it is, but that the end of the day, it works as it should, and saves your customer a lot of money. Have a nice day Eric O
@DIYDaveOK
@DIYDaveOK Жыл бұрын
Awesome as always, thanks Eric!
@rsanchez5676
@rsanchez5676 Жыл бұрын
Your weld settings sounded perfect!
@danielluber209
@danielluber209 Жыл бұрын
Fantastic Job!! Thank you for doing it your way and not speeding up the camera. I LOVE watching you weld and when cutting stuff off..
@derekfriday7931
@derekfriday7931 Жыл бұрын
"I should see if I have a blade any duller than this one" 😂 I was not ready for that this early in the morning
@Mikeaaron777
@Mikeaaron777 Жыл бұрын
On my 06 Taurus, you have converters off each bank, going to a Y. Then it travels to a flange. Another flange connects with a 2 or 2.5 length of stainless flex connected to a length of pipe and the big converter. Another section of pipe and the muffler. Well the right side flange at the manifold was leaking and the engineers decided to change the flange and gasket as a fix. The dealership did the work ,cracked the flex, and told me to fix, I needed to buy a new converter assembly. A muffler shop welded on a new flex for me. The dealership wanted $1100 for the fix, and the muffler shop was $225.
@Peter-pv8xx
@Peter-pv8xx Жыл бұрын
1997 s10 extended cab LS 4.3 with 152,000 with original stainless steel exhaust system still in great shape as is the rest of the truck and in the Northeast to boot.
@johncraig406
@johncraig406 Жыл бұрын
Nice clean looking welds Eric, good to go
@turbobus6731
@turbobus6731 Жыл бұрын
Your welding looked fine and the arc sounded perfect, my reply to the “pros”,,,,, “didn’t say my welds were good lookin’, said I was a good lookin’ welder”😂🤣
Don't Be A Jerry!
21:55
South Main Auto LLC
Рет қаралды 355 М.
Honda Passport: MIL On With A P0502
32:53
South Main Auto LLC
Рет қаралды 173 М.
123 GO! Houseによる偽の舌ドッキリ 😂👅
00:20
123 GO! HOUSE Japanese
Рет қаралды 5 МЛН
الذرة أنقذت حياتي🌽😱
00:27
Cool Tool SHORTS Arabic
Рет қаралды 13 МЛН
Они так быстро убрались!
01:00
Аришнев
Рет қаралды 3,1 МЛН
Road Trip: Wrecker Call
35:54
South Main Auto LLC
Рет қаралды 418 М.
This is Out of Control...The AWD Ford Flex is a WOLF In Sheeps Clothing!
6:37
Chevy 2500HD With A Bizarre Running Issue
35:04
South Main Auto LLC
Рет қаралды 222 М.
Ford F250: Stalls Out & Sometimes Restarts?
31:23
South Main Auto LLC
Рет қаралды 264 М.
Chevy Trailblazer: Will Not Run A Drive Cycle
38:49
South Main Auto LLC
Рет қаралды 247 М.
'17 GMC Canyon: Front Wheel Bearing & Brake Hoses
31:55
South Main Auto LLC
Рет қаралды 148 М.
Honda CRV: Extended Crank Time / No Crank Signal
25:13
South Main Auto LLC
Рет қаралды 160 М.
Used Car Guy Special: Chevy Tahoe Edition - Part I
28:55
South Main Auto LLC
Рет қаралды 604 М.
Lifting Car off of Lift  |  VIDEO Ruined!!  Mint 1994-2004 Ford Mustang GT 4.6
46:00
Rainman Ray's Repairs
Рет қаралды 1 МЛН
123 GO! Houseによる偽の舌ドッキリ 😂👅
00:20
123 GO! HOUSE Japanese
Рет қаралды 5 МЛН