SP Concepts Exhaust with 475 S&S Cam Dyno Chart/Sound Clip

SP Concepts Exhaust with 475 S&S Cam Dyno Chart/Sound Clip - 2021 Harley Low Rider S

Рет қаралды 35,896

Жыл бұрын

We're finally getting around to testing out some pipes on our shop 2021 Harley Low Rider S. First one up is the SP Concepts Lanesplitter Exhaust. We have ahad alot of interest in this new Brand and so far we like what we see. Pipes are really nice quality, Made in the USA and they sound chunky!
We paired the pipe with the S&S 475 Cam and HPI 58mm Throttle Body with Tunnel Ram Air Cleaner.
Check it our to see what you think! You can find all the links for the products below. As always if you have any questions, please let us know.
Shop:
Exhaust: www.getlowered.com/sp-concept...
S&S Cam: www.getlowered.com/s-s-475-ca...
Air Cleaner: www.getlowered.com/horsepower...
Seat: www.getlowered.com/san-diego-...
Social:
Instagram: / get_lowered
Facebook: / getlowered

Пікірлер: 65

@tau4942 Жыл бұрын

sounds sooo good!

@leorobles9885 Жыл бұрын

Beast 🔥🔥🔥🔥

@kylem4130 11 ай бұрын

Damn good!

@lowriderstliving 8 ай бұрын

Got about the same from the 465. HP 124/139 TQ. That’s on the 22ST.

@austinmullins2710 3 ай бұрын

Not a chance

@lowriderstliving 2 ай бұрын

@@austinmullins2710 Oh really smart guy? Got some 💶 to back up that statement?

@doom3crazy 8 ай бұрын

What’s your 0-60 time

@lio1999 Жыл бұрын

Very nice looking and sound exhaust. Is it possible to measure the exhaust decibel? I need an exhaust which comply with traffic regulations.

@FXLRS_CALI Жыл бұрын

This definitely does not comply

@pierfrancescotancredi8353 10 ай бұрын

This is too loud, especially with the 475 cam, maybe with the stock cam it would be a bit softer. Anyway, it looks good and the build quality is really high, a great product even if expensive but it's worth, the result is great.

@lio1999 10 ай бұрын

@@pierfrancescotancredi8353 thanks. I went with supermeg supertrapp, it a good soung exhaust

@robertyoung5678 Жыл бұрын

Wow really love the bike and what you did to it 124 hp in 124 torque wow that’s really impressive so do you have a stage three or stage four on that bike thank you

@clubstyleridahd4695 Жыл бұрын

Stage 2 assuming since they are running the 475

@Getlowered Жыл бұрын

Stage 2, cam install and throttle body.

@robertyoung5678 Жыл бұрын

@@Getlowered those are absolutely fantastic numbers for what you did to it an awesome video👍

@mrcalderin1 Жыл бұрын

I got 124/132 from my 475 with tbr turnout exhaust Trask intake and S&S 55mm manifold only.

@jasonharrold6686 Жыл бұрын

@@Getlowered links to the throttle body and cam?

@2WheelPursuit 6 ай бұрын

Those are some pretty damn good numbers! Any idea what the top speed is?

@austinmullins2710 3 ай бұрын

Those numbers are horse shit

@fatbobchronicles6125 Жыл бұрын

Nice !! What tuner did you guys run 👍

@Getlowered Жыл бұрын

Power Vision.

@robertdrawdy3749 Жыл бұрын

How would you compare this to the trask assualt 2into1? Sound and number wise?

@tommilland329 Ай бұрын

There’s a dude on here from NZ that has the trask assault with the s&s 550. I’ve never heard it in person but it’s what every Harley should sound like. He reckons it’s loud as f@ck. Also has had a couple of mods as well…

@robertdrawdy3749 Ай бұрын

@tommilland329 ok so I had a trask assualt when I posted this comment. I went and ordered the big bore and let me tell you WAYYYYY louder. The trask was always loud on decel but never crazy on acceleration sound. But the big bore is crazy

@Rugged357 Жыл бұрын

Between this one and TB turn out which one would you say is louder?

@terranceh5344 Жыл бұрын

From a guy who’s had both, this one is significantly louder than the TBR turnout. Fit and finish is better. I’ve only been running it for about 100 miles or so but I like it a lot better than my TBR.

@chuckdchuck Ай бұрын

I have both. TBR turnout is definitely louder.

@tommilland329 Ай бұрын

@@chuckdchuckcontroversial….

@Jay_Tovennn 2 ай бұрын

Which one is the better exhaust of the two? HPi or SP Concepts?

@nolandale8797 2 ай бұрын

Blockhead has a series that does all the performance exhausts with dyno information.

@nickthinkpainting1978 8 ай бұрын

This the lanesplitter

@ra7238 10 ай бұрын

With so much engine how come so little HP/Torque…dgmw, love dynas especially the LS but why so small power gains

@jaybo9044 3 ай бұрын

Name another 1868cc or 114ci vtwin that isn’t a sport bike with 124hp to the wheel….i’ll wait……

@Bajaheat Ай бұрын

@@jaybo9044m109

@duffy1298 Жыл бұрын

How do these things stack up in quality and sound to hpi?

@hooniganruiz5613 Жыл бұрын

Build quality is awesome, the lanesplitter is wayyyy loud though

@duffy1298 Жыл бұрын

@@hooniganruiz5613 good to know. I think I’ll stick to the hpi.

@PotatoeJoe69 10 ай бұрын

About how much qould you guys quote a cam install on a M8 softail with adjustable pushrods and all customer supplied parts? How much for dyno tune, roughly speaking?

@rynrussell4580 2 ай бұрын

@tarthuruttle1166 Жыл бұрын

Is this the lanesplitter or big bore

@Getlowered Жыл бұрын

This is the Lane Splitter

@ryandawes2134 Жыл бұрын

Are these louder than short shots

@hooniganruiz5613 Жыл бұрын

Yes for sure

@gtafarmer6615 3 ай бұрын

😂 no

@user-mw4qs9cb3p 6 ай бұрын

How much does a Bike like that’s go for?

@gtafarmer6615 3 ай бұрын

In New Zealand that bike without mods is around $34,000

@MrSuzukiyamaha Жыл бұрын

Why is it smoking?

@Getlowered Жыл бұрын

Since it was 12*

@steveo7767 Жыл бұрын

That HPI air filter is going to have to grow on me

@davidmlee8448 Жыл бұрын

doesnt have to - the elbow intakes arent ideal

@steveo7767 Жыл бұрын

@@davidmlee8448 I have an Arlen Ness velocity stack air cleaner on mine works great boost 15hp on dyno.

@David-zw6jm Жыл бұрын

💥 "promosm"!

@austinmullins2710 3 ай бұрын

These are bullshit dyno numbers. You’re not getting that out of that cam and a 114. Just trying to sell the same 2in1 exhaust. I’ll let you rebuild my bike and if I’m wrong, I’ll pay double.

@Getlowered 3 ай бұрын

Uhhh, no. Maybe for just a cam only and stock manifold/air cleaner. But this is Throttle body and Tunnel Ram as well. Try the same combo. HPI, D&D or Bassani would have same results.

@dextersuarez9948 9 сағат бұрын

@@Getloweredwhat manifold are you running? I’ve got a 55mm s&s ported and a teardrop air cleaner, woods cam and a 2-1 exhaust, Considering a tunnel ram and a different pipe/cam to get similar numbers as I don’t want to bore it

@ChrisB10 3 ай бұрын

Sounds like shit 2 into 2 sounds so much better

@user-mw4qs9cb3p 6 ай бұрын

How much does a Bike like that’s go for?

@FrankBonessa Ай бұрын

too much. nice bike tho.

@mattd03411 Ай бұрын

Stock my was 21 -22 grand out the door. Pipe is 1000 - 1500. Cam kit is another 1000 - 1500. Call it 26-25,000ish if you can get the dealer to sell it to you at a fair price and you do the work yourself.

@user-mw4qs9cb3p 6 ай бұрын

How much does a Bike like that’s go for?

@austinmullins2710 3 ай бұрын

20k for bike. $2700 for all stage 2 parts, if you do it yourself. Rest do the bike is pretty stock. Also those dyno numbers are bullshit

@gtafarmer6615 3 ай бұрын

Why do you say they are bullshit?