SP110E Bluetooth Module - Addressable Pixel WS2812 WS2811 RGB LED Strip

No video

SP110E Bluetooth Module - Addressable Pixel WS2812 WS2811 RGB LED Strip

Рет қаралды 21,212

Adi Setiawan

Күн бұрын

Пікірлер: 34

@gc.6910 3 жыл бұрын

Hi 👋 if you have for example two SP110E controllers, can you control the two strips at the same time?

@vincebidot7055 5 жыл бұрын

When the power is turned off from this for a few hours or longer, does it return to pattern one or the last pattern that was used when it's powered back on?

@adisetiawan3193 5 жыл бұрын

Vince Bidot it maintain the last pattern we choosed.

@vincebidot7055 5 жыл бұрын

@@adisetiawan3193 I'm glad to hear that, I plan on using this in my headlights.

@ysufbrandsex7838 3 жыл бұрын

Kalo buat alis motor... Buat sein,ny apa bisa??

@yandpadingdang5298 5 жыл бұрын

bisa untuk led cob gak, kaya angel eyes di projie gitu

@adisetiawan3193 5 жыл бұрын

yand padingdang setau saya angel eyes belum ada yang pakai ws2812 / ws 2811 utk led controllernya. Jadi belum bisa

@Sachin.Sheelavant 5 жыл бұрын

what's the power rating of the power supply used for sp110e along with 1m ws2812b strip?

@adisetiawan3193 5 жыл бұрын

Sachin Sheelavant it depends on the number of led per meter. For the 60 led/m, with 12V Power supply, it requires around 1.5A (better use 2A), while for the 5V may need 4 amp power supply

@bhirawatv5509 5 жыл бұрын

Misal lednya dipotong satu satu trus disambung pke kbel 20cm arus 5A kuat gk bang?

@user-ie5cq5yr5s 4 жыл бұрын

Hello! I have a question; I have a LED strip 2 pcs each 1 meter ws2812 144 diodes per 1 meter and the sp110e controller what voltage should I supply via DC? 🙏🙏

@adisetiawan3193 4 жыл бұрын

ИНТЕРЕСНЫЙ ПРОЕКТ Hi, it will be depend on the LED 2812 specifications. You can check the manufacturer specs. However, I would suggest you start with 5V, if it doesn’t lit, then you go for 12V

@user-ie5cq5yr5s 4 жыл бұрын

@@adisetiawan3193 Yes, I realized this, what ampere is needed there for it to work, does it work from powerbank?

@adisetiawan3193 4 жыл бұрын

@@user-ie5cq5yr5s Hi, based on the specs on the internet, one led will draw max of 50mA of current at full brightness. So 144 leds will draw max of 7.2 Amp. I don't think the powerbank will able to produce that amount of current, since it main purpose is to charge mobile phone, which maybe max of 4A?

@user-ie5cq5yr5s 4 жыл бұрын

@@adisetiawan3193 all thanks understand, then you need to put 15A 5v 15A yes

@tometube1 Жыл бұрын

Can you group multiples if these controllers?

@ardi_nostalgia4125 4 жыл бұрын

Dijual yg pake wifi nggak? Yang bukan bluetooth.. kalo ada namanya apa

@lonepiggy7709 4 жыл бұрын

Brother if I need to connect two strips with two different sp110e controllers, can I anyhow control them together or to change colour I need to change both of them one by one.?

@gc.6910 3 жыл бұрын

Hello I have the same question, have you found an answer?

@johnpatrick7101 3 жыл бұрын

Pengin nanya bang, ini yang ws2811 atau ws2812b yah? Sama belinya dimana yaa gan?

@adisetiawan3193 3 жыл бұрын

Kalau controller nya support dua2nya. Beli SP110E Bluetooth RGB Controller WS2812B WS2811 Pixel Light Addressable tokopedia.link/7odRmb9Nweb di toko Adi's Corner Rp69.000 di Tokopedia dengan Bebas Ongkir, Sekarang!

@ugurgbz8858 5 жыл бұрын

Hello I need to information.Could you help me please.I will use ws2811 5m 60 led IP30 led strip. Do I need to connect a 12V power supply to the sp110e for this? How to select ampere ratios?

@adisetiawan3193 5 жыл бұрын

UGUR gbz hi, the voltage will be depent on the voltage of the led strip. I think for ws2811 will require 12V. So you can connect 12V to the module. This module will also work on 5V which will have 5V output as well. For the ampere, each 5050 led maybe about 0.3 watt. For 12V it will need around 0.025Amp. If you have 60 led/m, 5m will have 300 led and need 7.5A.

@ugurgbz8858 5 жыл бұрын

@@adisetiawan3193 Firstly thank you for your feedback. Then should I do 12V 10 A when choosing transformer for SP110E??

@adisetiawan3193 5 жыл бұрын

Yes, if you want to be precise, you can refer to the led strip manufacturer, so you can get better calculation on the power requirement.