BTF-LIGHTING Tutorial: SP105E Bluetooth Magic Controller Installation Video

Рет қаралды 91,904

7 жыл бұрын

This video will show you how to connect the led strip and this controller . Lots of details.If you want to buy our product, you can just search our brand"BTF-LIGHTING" on Amazon and click the brand name into our shop to find the products you want.

Пікірлер: 172

@llrainll 3 жыл бұрын

I can’t wait to get mine! So excited !

@legendprincess6962 2 жыл бұрын

Thank u ..waiting on mine to come in next Tues can't wait 💜💜🙏March 2022

@Leonardo-rv1lc 2 жыл бұрын

Thank you!!!!

@dylanshea755 27 күн бұрын

I wish people talked on this video

@ariel1k2 5 жыл бұрын

To anyone having trouble connecting to the controller via Bluetooth, try and activating your Location Services and then try again, that solved my problem :)

@sparky1570784 5 жыл бұрын

Didn't solve mine.

@ariel1k2 5 жыл бұрын

@@sparky1570784 Is your controller connected properly? When it is connected to the LED strip, do any of the leds light up?

@sparky1570784 5 жыл бұрын

@@ariel1k2 all of them are lit up even when the app is switched to off they are still on. They stay a dim static light blue and won't change color or mode or even turn off.

@ariel1k2 5 жыл бұрын

@@sparky1570784 First make sure the power supply is correctly connected since even the slightest disconnection will terminate your bluetooth session. Other than that go to the settings and configure the right led strip type, mine was ws2812b so I chose we2811, also choose the correct RGB sequence. Those two should fix it, if not honestly O don't got any more ideas :(

@sparky1570784 5 жыл бұрын

@@ariel1k2 yea I'm at the same point of out if ideas as well. I have selected the type and led arrangement and even selected the amount of LEDs (pixels). I have the power and ground soldered directly and even tried a separate plug in power supply. Nothing. Still just stays on in that dim light blue. Almost thinking there's a short inside the control box some where because I noticed in the video when you plugged in the leds to the controller it didn't turn on right away until you started messing with the settings. Mine turns on and stays on the moment I plug it in regardless if my app is connected or not.

@user-si1jj2hk7l 2 жыл бұрын

How do you reset this controller? My controller is suddenly unsearchable via bluetooth. I'm stuck at one setting

@nazgulblunt4442 2 жыл бұрын

Hi there, thank you for the informative video. Wanted to ask is there a way to have Auto light on and off like set a duration how you want LED on? as i want to use as a night light for my elderly parents for stairs in the night? also the other end of the LED where it has the wire are you able to remove it to shorten it please advise.

@BTFLIGHTING 2 жыл бұрын

Sure you can . I think you can use this controller : www.amazon.com/dp/B096VP2SMZ?ref=myi_title_dp and this kind of singal white light LED strip : www.amazon.com/dp/B091KM35TY?ref=myi_title_dp timer function . If you need ,chasing color LED strip , you can use SP601E controller :www.amazon.com/dp/B088LZC1MJ?ref=myi_title_dp This chasing color led strip : www.amazon.com/dp/B088BB8WTZ?ref=myi_title_dp anyother product question , please contact us support@btf-lighting.com

@ghjaay9495 2 жыл бұрын

I have halo lights on my atv that slip over my headlights to give it a sharp look and when I set them to my desired color and turn the bike off they go back to default green is there a way to make it stay as my desired color, through the app maybe?, thanks

@rahulp2288 Жыл бұрын

Hey, can I add my own color to this strip? Like Purple and Orange for Halloween? All I see are different modes but no way to control LEDs.. Any option? Thanks

@adamm121212 5 жыл бұрын

Mine worked great but I didnt turn them on for a few weeks and now they womt work. When i go into my bluetooth settings it asks for the pin but I dont know it. If I connect through the magic led app it says I'm connected but wont light them

@rohitkrishnan2269 Ай бұрын

I got the ws2812B for this controller and the colors are flipped (I chose the RGB WS2811 in the settings menu). Is there any fix? I tried other settings but it does not match up.

@BTFLIGHTING Ай бұрын

Can you contact us support@btf-lighting.com , what power supply do you use ? Power supply output voltage ,output current

@chuck300mxc 10 ай бұрын

I have the sp107e controller that uses led chord, my lights are ws2815 5meter and 60 led/meter for a total of 300 led’s. What numbers do I put into the settings where it has segments, pixels etc. ? I tried 1 segment and 300 pixels but it won’t allow those numbers, 2 segments and 150 pixels per segments will work but I’m not sure if it’s right. Any help would be greatly appreciated

@BTFLIGHTING 10 ай бұрын

When you unfold your light strip and lay it on the floor, adjust these two parameters again, and different parameters will have different effects. You can carefully compare and see

@roycejamie8250 2 жыл бұрын

Does the app have any argb flowing presets?

@jonahzaimes3197 Жыл бұрын

Do you have to have the gateway to use the bluetooth feature? I am looking at getting the C01RF Single Color. Is this already bluetooth enabled?

@BTFLIGHTING Жыл бұрын

C01RF controller is for no ic chip Single color LED strip ,it can work with a gateway . This is the gateway can work with C01RF controller www.amazon.com/dp/B0B8ZBM91H?ref=myi_title_dp If you want bluetooth APP controller for no ic chip LED strip ,you also can use this Bluetooth mesh controller LM053 www.amazon.com/dp/B09NQ15B5K?ref=myi_title_dp

@MarcLeger-bg4rp 7 ай бұрын

With the controller and the app, I don’t know what lights I’m driving ,Brand? The app ask to pick some model numbers and letters but I don’t know what I have, the led lights where already on the house, any tips thanks

@BTFLIGHTING 7 ай бұрын

Could you please send us your order ID ? our email address is support@btf-lighting.com

@plu6612 Жыл бұрын

hello, i was wondering if you're able to rename the devices on the app. that would be super nice since a friend and i use this app on both of our cars LED setups and don't want to mix them up and select each others LED's lol

@BTFLIGHTING Жыл бұрын

You can use this LED strip controller ,you can rename it . www.amazon.com/dp/B07FVY51PW?ref=myi_title_dp

@JJMTrucking 4 жыл бұрын

Make a video to show this working in a car

@joynalmiah8864 6 жыл бұрын

I want to install this in my pc. Does the controller get hot? Do you know of another way I could power this from my psu? If you have the connected I’ll buy it off you.

@BTFLIGHTING 6 жыл бұрын

Hello, you need to makesure your PC power first. If your pc have enough power to support the led strip it is ok.

@therexershow 5 ай бұрын

Can I just connect more of the light strips continuously with the plastic female and male connector sockets ?

@BTFLIGHTING 5 ай бұрын

You mean connect many LED strip light in series? Yes , it can . But you have to power injection every 5meters or 10meter because of voltage drop

@nickscheuring6287 Жыл бұрын

if you have multiple controllers for different strips do they communicate and sync together ?

@BTFLIGHTING Жыл бұрын

we recommend you use this SP638E SPI RGB controller , www.amazon.com/dp/B0C3QZRVZJ?ref=myi_title_dp One APP can group control all the SP638E SPI RGB controller . You also can use the RB3 RF Remote to control all the SP638E controller .www.amazon.com/dp/B0BYDG1X5M?ref=myi_title_dp&th=1

@2xYou_ 4 ай бұрын

after a couple minutes it smelled burnt and when i unplugged the power supply the end of the plug had burnt plastic. i bought the exact same power supply. It may have been because of how the plug was angled, should i try replugging it even with the end of the power supply plug burnt or is that a really bad idea

@BTFLIGHTING 4 ай бұрын

You need to investigate where the short circuit is. It's possible that the positive and negative poles of the light strip are touching each other ,like the LED strip red wire and white wire touch each other

@2xYou_ 4 ай бұрын

@@BTFLIGHTING im talking about the power supply plug

@PanchiNorthstar 6 жыл бұрын

Led strips ws2812b with this controller can reproduce the rainbow scroll effect? Can i configure to fade scroll and the speed of the effect?

@BTFLIGHTING 6 жыл бұрын

Hello, SP105E controller have 200 kinds mode,but I can't makesure if it has the rainbow scroll effect. You can adjuast the speed.

@michaelhabib8932 5 жыл бұрын

How do you know how many pixels to enter? I can't tell with the LED strips I have

@BTFLIGHTING 5 жыл бұрын

For this SP105E ,max control 2048 pixels , you can enter 2048 pixels directly .

@solowriders 6 жыл бұрын

Have you had any interference issues I have these in my headlights and I noticed when they were off they would still flicker and now that it’s cold where I live they flicker a lot more could the controller be bad

@BTFLIGHTING 6 жыл бұрын

Do you have some photos ? or you can shot a video for me . I will have a check . my email address is 2126290993@qq.com

@BTFLIGHTING 6 жыл бұрын

Hello , I am still waiting for your reply .

@solowriders 6 жыл бұрын

BTF-LIGHTING I just disconnected the controller that’s causing the flickering for now and will replace it

@BTFLIGHTING 6 жыл бұрын

So you send it back to the Amaozn warehouse and ask for a new one . that is ok. If you have anyother product problems , you can ask me anytime .

@solowriders 6 жыл бұрын

BTF-LIGHTING ok thanks

@nabelopeng2000 4 жыл бұрын

Kann man damit RGB Bubbles steuern?

@304trails8 3 жыл бұрын

Does this controller stack and all that with the ws2811 leds?

@BTFLIGHTING 3 жыл бұрын

Yes, it can. But you need to make sure your voltage is 12V

@Malik-ix2kx 4 жыл бұрын

Hi there i have sp107e and ws2801 12v pixel 50 leds with red, white, green and blue wires. Can you please tell me how to connect with controller ? Actually when i connected with controller the light was very dim and colour wasn,t changing. So please tell me how to do it ? Thanks in advance

@BTFLIGHTING 4 жыл бұрын

Hello , You can try to contact us and send us your order ID , We can show you how to connect , our email address is support@btf-lighting.com

@iqmalhaikal280 8 ай бұрын

Can i use the rgb controller on my 2835 rgb strip light?

@BTFLIGHTING 8 ай бұрын

You can use this controller SP630E : www.amazon.com/gp/product/B0BPCH695M?th=1

@djsjjd15 5 жыл бұрын

Mine won't work. I;m trying to set-up 3-pin lights. The Mokungit ws2182b 93-led ring set. If I turn on the app when the controller is connected to power and the leds, the controller does not appear on my phone's bluetooth. If I turn on the app with the power on the controller but LEDs UNplugged, my phone can find the app, it will connect and I can choose LED type and # of pixels. However, as soon as I plug the leds in, the app disconnects and the phone cannot locate or connect to the controller

@miguelmontanez69 5 жыл бұрын

djsjjd15 I’m having the same issue have you figured out your issue ??

@audiotechmsbnseattle1090 4 жыл бұрын

What do I need it workd with ws2812b? I have a sp105e but no it works with ws2812b .

@BTFLIGHTING 4 жыл бұрын

Hello , Can you contact us support@btf-lighting.com ? We need to know about your connection and power supply . You can send us some photos , we help you to check .

@stektirade 8 ай бұрын

My question is will the led's stay on if you exit out of the app?

@BTFLIGHTING 8 ай бұрын

Yes , it can . I recommend you use this LED strip controller kit . SP630E+RB3 : www.amazon.com/dp/B0C69NSD23?ref=myi_title_dp

@darrenmorange 6 жыл бұрын

HELP! I've set it up. first several light come on blueish white. solid not blinking. nothing else....and the light strip is getting HOT!

@BTFLIGHTING 6 жыл бұрын

Hello , You can contact me with this email supprot@btf-lighting.com , I will help you to solve it . Also I need the amazon order ID .

@deejay_iceke 8 ай бұрын

What if i have 2 magic controllers connected on 2 different led lines? Will the app work for the both?

@BTFLIGHTING 8 ай бұрын

2 different LED lines should be the same IC type and Color channel order .

@deejay_iceke 8 ай бұрын

Yes, but what if use 2 separated ws2811 lines and 2 magic controllers in my car. 1 for the trunk and 1 for under the seats.

@joshuawarr1883 5 жыл бұрын

How do I contact you (the manufactures customer support)?

@BTFLIGHTING 5 жыл бұрын

This is our email address support@btf-lighting.com

@ralucarapas7084 6 жыл бұрын

Hello! :) if you can help me. I want to buy a led strip but i don't know the difference between ws2812 ws2812b or ws2813 and don't know which one should i buy..

@BTFLIGHTING 6 жыл бұрын

the bluetooth controller can control WS2812B and the WS2813 Led strip. all of then are the same IC the WS2812B led strip has one date input , when one led can not work or the data wire is broken the rest LEDs can not work ,because the rest leds has no data . WS2813 led strip has two data input , has a data input and a backup data input . all of them connect to the data output from the controller. when one led is broken or the data wire is broken , the backup data wire still can work ,so the rest leds can still work fine.

@ralucarapas7084 6 жыл бұрын

BTF-LIGHTING thank you for help. One more question i have: do you know what controller is this one? kzfaq.info/get/bejne/Y69gq7p-0se-pKc.html

@BTFLIGHTING 6 жыл бұрын

we have the similar one . this is the link .this kind of controller can control WS2812B and WS2811 led strip. www.amazon.com/dp/B01DC0JKGY?m=A35UAT07QG3EC6&ref_=v_sp_widget_detail_page the lighting effect is similar

@ralucarapas7084 6 жыл бұрын

BTF-LIGHTING does it work with ws2813?

@BTFLIGHTING 6 жыл бұрын

Yes, it can . it supports almost all the IC type .

@jochentrescher5705 6 жыл бұрын

Warum hattest du 2048 Pixel eingegeben? Ich habe WS2801 mit 32 LEDs/m, also 160 Leds und gebe 160 Pixel ein. Läuft einwandfrei.

@BTFLIGHTING 6 жыл бұрын

2048 is the maximum pixels the controller can control. You can just enter 2048, then you don't need to calculate the number of the leds. But your operation is also right.

@abefrancisco624 3 жыл бұрын

To hard to connect in the app. Do you have video on that after down loading

@BTFLIGHTING 3 жыл бұрын

Hello, you can refer this video: kzfaq.info/get/bejne/eZ9_qbubkq_ZpaM.html Hope this video can help you a lot.

@user-yc5gt8si2i 2 жыл бұрын

Установили такое на автомобиль не показали как надо пользоваться им. Подскажите какое приложение скачать и как быть

@buenosdiiias9470 5 жыл бұрын

Which power supply you use ?

@BTFLIGHTING 5 жыл бұрын

It depends on which LED strip do you use . If you use DC5V LED strip , you should use DC5V power supply . If you use DC12V LED strip , you should use DC12V power supply

@JonathanTorres-so4qq 2 жыл бұрын

Im having a horrible time setting up this strip. I only have 3 lights that turned on and nothing else. What could it be ?

@BTFLIGHTING 2 жыл бұрын

Can you send us your order ID ? And contact us support@btf-lighting.com ? we need to know what power supply do you use ?DC5V10A ? DC12V10A ? Which LED strip do you use ?WS2812B or WS2811 ? If you can , please also send us a vido . Send us a video : wetransfer.com/

@eliecaton7468 2 жыл бұрын

Hi how do I know what chip is in my led and what color code to go by

@BTFLIGHTING 2 жыл бұрын

Many LED strips that people always use is WS2811 WS2812B WS2813 WS2815 , you can know what chip it is from the LED strip seller .

@arcklight7236 Жыл бұрын

Can this control 20 pixel strip at once?

@BTFLIGHTING Жыл бұрын

It depends on the total IC chip quantity . it can control 2048 IC chip .

@Mubf4 6 жыл бұрын

where to download the bluetooth software?

@BTFLIGHTING 6 жыл бұрын

Hello， the name of the app is Magic Led, you can download from the QR code on the user manual .

@f.h7279 5 жыл бұрын

Can i connect 12v 2a ac adapter to the controller?

@BTFLIGHTING 5 жыл бұрын

Yes , you can . And please make sure your led strip is DC12V . You can not connect DC12V2A when you use DC5V LED strip .

@CreamPieAssHoles 3 жыл бұрын

@@BTFLIGHTING I was looking for that reply, thanks. I had 12v adapter and 5v strip. I have to buy 5v adapter now :)

@BTFLIGHTING 3 жыл бұрын

@@CreamPieAssHoles We are happy that we can solve your problem.😊

@justiiin 3 жыл бұрын

so does it work like the arduino or no?

@BTFLIGHTING 3 жыл бұрын

No ,it can not .

@aaronlfx9199 5 жыл бұрын

Why does my bluetooth controller come up as "invalid device" when I select it in the app?

@BTFLIGHTING 5 жыл бұрын

Hello , Please send us you order ID , we maybe can solve this . email address : support@btf-lighting.com

@aaronlfx9199 5 жыл бұрын

@@BTFLIGHTING never mind I figured it out thanks for the reply though

@BTFLIGHTING 5 жыл бұрын

@@aaronlfx9199 That is great . If you don't mind you can click this link and drop a review for this product

@lennart6807 4 жыл бұрын

@@aaronlfx9199 how do you fixed It? I have the same problem ... it cannot be connected

@aaronlfx9199 4 жыл бұрын

@@lennart6807 disconnect the negative wire then reconnect it. I'm pretty sure that's what I did but it's been awhile I have different lights now.

@ebenezervalvi1009 4 жыл бұрын

Will this work with the WS2815

@BTFLIGHTING 4 жыл бұрын

Yes

@tangodelta722 2 жыл бұрын

Which setting?

@philiphazeleger4480 3 жыл бұрын

Is it possible to connect with arduino uno? And i it is.. can you please make a video about it?

@BTFLIGHTING 3 жыл бұрын

Hello, we don't use Arduino Uno to control, but our Facebook buyer called Cosimo Semeraro, who makes a WS2812B video with Arduino, you can contact him to get more details. The video link: kzfaq.info/get/bejne/fsx1q5x0x5a1g5c.html And we will think about your idea.

@lukemichael2076 3 жыл бұрын

I have a problem with my Hex-Halo for my car's Headlight. On the Magic-Led app, i have selected a Solid Color from the color wheel (NOT FROM the FIVE COLOR on the bottom), it works at first, BUT when you turn off the car engine and ON again, the LED light turns to RED and not the one you selected before.

@BTFLIGHTING 3 жыл бұрын

Hello Magic-LED app has a problem, it will lose the original setting when your power source is cutted off. So that, you need to set again when you connect the power engine.

@lukemichael2076 3 жыл бұрын

@@BTFLIGHTING can that be fixed? or any other way to prevent that problem..? I dont like to reset it everytime i turn my car ON..

@BTFLIGHTING 3 жыл бұрын

@@lukemichael2076 Hello, it's the manufacturer designer problem, when the controller loses current, it will lose the setting record. Of course, you can consider changing the SP601E controller, it can keep the last setting.

@lukemichael2076 3 жыл бұрын

@@BTFLIGHTING how about the SP108E? Will it NOT lose solid color selection?

@BTFLIGHTING 3 жыл бұрын

@@lukemichael2076 SP108E can keep the last setting.

@Michael_GER_1988 6 жыл бұрын

What is the max number of APA102 Leds for this controller? I have a Led Strip with 300 Leds in front of me, but i think its not a good idea to connect them. 300 APA102 Leds is 18A current for this tiny controller. You can set 2048 Pixels in the settings but this is unrealistic! 2048 APA102 Leds = 123A! This is definitively not a good idea. i can't find a description what the max current is!

@BTFLIGHTING 6 жыл бұрын

Hello , you can use DC5V20A power adapter for the 3000Leds apa102c LED strip , that is ok. It also can control 2048 pixels .Of course it can pass 123A current , but there is another problem , every led strip will voltage drop. For example you end to end connect 4 rolls apa102c led strip ,there are 1200 pixels and you use the DC5V7A for these pixels, you will find that you can not light up all the 1200 pixels ,at the end of the led strip can not light up , so you have to add DC5V at the end of the led strip. So the controller just pass a little part of current , you have to add the rest current at the end of led strip.

@Michael_GER_1988 6 жыл бұрын

thx for the great answer :)

@BTFLIGHTING 6 жыл бұрын

You are welcome.

@sparky1570784 5 жыл бұрын

Why does my leds stay a dim static pale blue and I can't change it. App doesn't do shit. What's going on? Wires are connected to power ground and data inputs.

@BTFLIGHTING 5 жыл бұрын

Hello , Please contact us support@btf-lighting.com , we can help you to solve the problem . Which LED strip or power supply do you use ?Please also tell us the order ID . Best regards BTF-LGIHTING support@btf-lighting.com

@WindowBlazerl 4 жыл бұрын

How do you control individual pixels for the light strips that allow that?

@BTFLIGHTING 4 жыл бұрын

Use the APP Magic-LED , it is bluetooth controller

@xXxMOPSBACKExXx 4 жыл бұрын

Why i have only red with my ws2811 + sp105e ?

@BTFLIGHTING 4 жыл бұрын

Can you tell us your order ID ? This is our email address support@btf-lighting.com

@deejay_iceke 8 ай бұрын

Voltage problem i guess

@filiplujic1809 6 жыл бұрын

Hello, i have one important question! Can I control 5050 led strip with this connector (i mean mod like rainbow transition and other cool ones)

@BTFLIGHTING 6 жыл бұрын

you mean RGB5050 led strip ? no , it can't . because the RGB5050 led strip has no intelligent IC so it can not have the rainbow lighting effect . they will have the same color at the same time and Blinking . the lighting effect can not running.

@filiplujic1809 6 жыл бұрын

what led strip i can use ( if you could name all of it)

@BTFLIGHTING 6 жыл бұрын

WS2812B WS2811 APA102C SK9822 SK6812RGB SK6812RGBW WS2813 WS2801 aAPA105C etc , We often use WS2812B WS2811 www.amazon.com/dp/B01CDTEKAG?m=A35UAT07QG3EC6&ref_=v_sp_widget_detail_page

@Elektronick.online 6 жыл бұрын

Hi you i need help. I've bought the same but dont know The password for that

@Elektronick.online 6 жыл бұрын

I cant connect

@BTFLIGHTING 6 жыл бұрын

Hello, the SP105E controller don't need the password, you just openrate on the Magic-LED APP

@rixfpv4470 3 жыл бұрын

@@BTFLIGHTING so this is rubbish cause i have the same issue noone but the person who posted this can get them to work

@bubbaa0219 3 жыл бұрын

Hello so I connected the sp105e controller and it’s just plain white soo can you help me?

@BTFLIGHTING 3 жыл бұрын

Hello, did you scan the QR code from the controller? You need to download the app and adjust the lightstrip mode from the app.

@bubbaa0219 3 жыл бұрын

@@BTFLIGHTING yes I did but it still was like that but I solved it I just needed to change some settings on the app and overall I love the controller

@bubbaa0219 3 жыл бұрын

@@BTFLIGHTING oh and what are pixels?

@BTFLIGHTING 3 жыл бұрын

We suggest 1024-1500 pixels, the max pixels is 2000

@BTFLIGHTING 3 жыл бұрын

Yes, you need to change the settings on the app

@RzVids 5 жыл бұрын

Installed on my car still doesn’t connect via Bluetooth

@Blizzy360 4 жыл бұрын

Having the same problem has anyone found anything to fix it

@deejay_iceke 8 ай бұрын

No problem with mine in the car.@@Blizzy360

@rixfpv4470 3 жыл бұрын

hi any fix for the password issue ready to send this rubbish back dosnt work asks for password soon as i try to connect i cannot recommend this product as i cant even get it to work

@BTFLIGHTING 3 жыл бұрын

Hello, we don't know your light strip, power supply and your wiring methods , we can't offer the suitable advice for you, can you send these messages or make a video for our service email: support@btf-lighting.com

@akrs6398 4 жыл бұрын

Does this turn on when you start your car or everytime you need to connect to Bluetooth and then turn it on in the app?

@BTFLIGHTING 4 жыл бұрын

When you power on , it can control your led strip . But when you want to change the lighting effect , you have to connect it via bluetooth .

@x3nonvoidch504 3 жыл бұрын

How many mode?

@BTFLIGHTING 3 жыл бұрын

180+ kinds of chasing color modes

@Elektronick.online 6 жыл бұрын

But the APP cant find The controller

@BTFLIGHTING 6 жыл бұрын

Hello, firstly you need to connect the everything well. Secondly opend the mobile phone APP, you will find the SP105E cotroller. Could you please send me some videos? Video is help us judge easily! Waiting for your early reply!

@BTFLIGHTING 6 жыл бұрын

Hello, could you give me your order number? Waiting for your early reply!

@cah245able 3 жыл бұрын

Mine isn’t coming up as an option

@BTFLIGHTING 3 жыл бұрын

Hello, we are not clear about your problem detail, you can make a video and email: support@btf-lighting.com, our customer support will help you check our the problems.

@deezle1460 6 ай бұрын

you have to make a decision = do want to make a music video or do you want to make a tutorial; if you want to make a tutorial, ditch the LAME music and talk / instruct / tutor... imagine if "schools" had teachers who just pressed "play" on a music player then just pointed at stuff as the music played.

@1bizjets 7 ай бұрын

My android would not see the SP105E Bluetooth I returned it. Disapointef.

@BTFLIGHTING 7 ай бұрын

Could you please contact us support@btf-lighting.com and send us your order ID ?

@chrisworrad 4 жыл бұрын

fucken thing won't pair, says to use 1234 or 0000, neither work

@rixfpv4470 3 жыл бұрын

can u show connection to a android device ? and show the app u are downloading this feels like a scam

@BTFLIGHTING 3 жыл бұрын

Hello, you can scan the QR code from SP105E and download the Magic-LED, after you download the app, find the SP105E(No password), them make a test "RGB" or "GRB" or others(It needs to test by yourself, the match is random, we can't make sure) until testing the true one.

@BTFLIGHTING 3 жыл бұрын

Thanks for your advice, we will try to make a video to show the operation.