Spark Plug swapping Kawasaki GPZ600R

Рет қаралды 538

4 ай бұрын

You are having problems changing the spark plugs on your GPZ600R? That pesky water pipe getting in the way? This video will show you a fuss freee way of changing the spark plugs without having to remove that annoying cooling pipe above cylinders 2 and 3.
Tool you need:
Amazon Link :
www.amazon.de/Doppelhexagon-D...

Пікірлер: 7

@distantdk 26 күн бұрын

I bought 2 different 18mm that had too wide walls, but my next door neighbor had one that fits perfectly and with the wobble extension its super easy. Think i will grind the walls a bit thinner with a belt sander or something, on one of the extra 18 mm i got, just to have it under the seat if needed. Good advice and loved you showing of the propper placement of cables on coils!. Thanks for all your help in the group aswell :).

@RoobieRoo2 4 ай бұрын

wow top notch tips and super practical, thanks so much XD

@harveyrushall3018 4 ай бұрын

A 3/8 drive standard 12mm plug socket on a woble bar extension fits straight in without issue. Couldn't be any easier.... no other messing around adapting needed.

@MrLefthooker 4 ай бұрын

Many roads lead to Rome I presume ☺️

@PButler199414 4 ай бұрын

Just went through this too. Swivel and extension was solution.

@PButler199414 4 ай бұрын

Also my Plugs wires were switched around and it still ran. Cant seem to get it fire now. it'll hit for a couple seconds and then cut out. Thank you ill try this when i get out to it.

@MrLefthooker 4 ай бұрын

The coils fire twice, so if the HT leads from a coil are swapped over it doesn't matter. What matters is, left coil 2&3, right coil 1&4. If you find the coils are swapped, look for the low tension wires on the back of the coils. They both have a red, but the black one is on the right and green on the left. I've seen the loom being put on all wonky putting those wires on the wrong side so it looked like the coils were mixed up.