I have done nothing but dig trenches and lay conduit at my apprenticeship, thank you for these.
@syrus123321 күн бұрын
How’s it going now?
@Ozravens2 жыл бұрын
You'd be the best person an apprentice could ask for! Great video
@leelewis85528 ай бұрын
Only 1 of 15 videos i found that is actually easy to understand thanks
@luda553 Жыл бұрын
Straight to the point, extremely helpful!
@brittnaybeddoes22303 жыл бұрын
Couldn't have done it without ya sparky Dave!!!
@legacyhealthcare73363 жыл бұрын
Brilliant simple and fully informative
@amenjoe2 жыл бұрын
Thank you! very easy to follow, i understand what you did
@johnisley45784 жыл бұрын
Hi Dave, Thanks for the vid's, they are absolutely great. A video on wiring up multiple power outlets/GPO's "say 3" would be great. Thank's
@NZRic0013 жыл бұрын
Perfectly explained!
@Don-xy8cy4 жыл бұрын
Nice a simple and to the point. Great video!
@jephthahjunor28153 жыл бұрын
Wonderful good explanation keep sending more videos.👍
@dannysegers4347 Жыл бұрын
Thanks for this awesome video 👍🙏
@groovejet772 жыл бұрын
Thanks Dave that was awesome!
@medetit2 жыл бұрын
thank you THANK YOU. makes my life much easier
@Niberspace2 ай бұрын
thank you so much for this
@drewjohn68474 жыл бұрын
great vid mate...
@JJs21214 жыл бұрын
thank you very much mate legend!
@elijahsiloukakato9924 ай бұрын
This really helps, appreciare you for that. I also need a video on wiring celing fan switch
@jamacrli98985 жыл бұрын
Great video.
@hughjarce5211 Жыл бұрын
That's a turrufic video. Thanks bro.
@ionho37163 жыл бұрын
Very good . big thanks
@billyboyd3493 Жыл бұрын
Good man - great info Thanx.
@entlungwini25702 жыл бұрын
Very helpful,thanks
@caiusdavid79453 ай бұрын
Perfect explained
@mrthickdick91888 ай бұрын
Thanks for this bro! Saved my arse
@the_astro_garden2 жыл бұрын
perfect, thank you!
@atatovo Жыл бұрын
Thanks mate helped alot.
@2Seth213 жыл бұрын
Great vids mate so helpful, keep it up
@dpkmax Жыл бұрын
Good video - 26th Nov 22 - Melbourne - converting garage light to auto
@simetime60452 жыл бұрын
This is gold 👍
@misribanda55553 жыл бұрын
Great one mate
@HouseFairyDIY4 жыл бұрын
I'm just trying to work out how to wire in two LED spots but will use a plug and not wire them into the mains. I am going to connect the spots in a circuit with one wire going to the switch. The cable I've bought has no earth. It's a metal switch. Is it necessary to have an earth? The cable that will go from the light switch to the plug also has just the live and neutral wires. Is it ok to do it all with no earths, especially considering I'm using a metal switch and a metal box?
@davidjohn67425 жыл бұрын
Cool. thanks
@absaly Жыл бұрын
good job mate
@marjorymoore15732 жыл бұрын
Very good thank you
@user-rl1ph5sf2h15 күн бұрын
Pretty straight forward.ta mate
@dardigs57923 жыл бұрын
Great idea
@easytalker8647 ай бұрын
Brilliant!!
@damienelliott26485 жыл бұрын
Thanks
@aceboy86137 ай бұрын
Your legend mate
@johnrambo62654 жыл бұрын
thanks dave
@localguyyes29063 жыл бұрын
Thanks bro Nice Easy Awesome accent
@gavindsouza64153 жыл бұрын
Thanks for your videos Can I use a 10amp switch to change a switch on an electric cooking range cheers
@Celtic-Acid3 жыл бұрын
:) VIDEO REQUEST : Installing a Hot Water Kit (I see you have an old vid on a hot water cylinder..). Also maybe a vid diagnosing comment problems with Stoves/oven units? Good what you're doing mate! keep it up. Thanks!!
@sparkydave3 жыл бұрын
😎👍
@clivecamangon79984 жыл бұрын
Hey mate, I have one power outlet on the garage ceiling and would like to add another one for another light fitting, how do I go about it? Cheers.
@chrismclean48322 жыл бұрын
Thanks, very helpful. Is it the same process for 1200mm fluro?
@chrisharvey23987 ай бұрын
Great videos, can you do one with multiple lights to 2/3 gang switch cheers
@marvaninstalls9 ай бұрын
Thanks Dave great video. Just asking my place has the wires out of the wall, how do I test which wire goes to the light and which one goes back to the switchboard? Thanks
@willo32524 жыл бұрын
Hey SparkyDave, How do I add a plug base for an exhaust fan to an IXL Tastic.
@krisdecke33222 жыл бұрын
Thanks 👍 🙏
@johno1234utube3 ай бұрын
Would love to see a demo for wiring in home automation switch modules, e.g. Shelly switch modules.
@moncei224 ай бұрын
Awesome
@rajat0909093 жыл бұрын
Very good I fix my light too...can u upload how to fix pulling light for attic...& floor LED lights like in the kitchen plz
@phillipsmith64162 жыл бұрын
hi . After you connect the red hot wire to the middle or C terminal on the switch , do you have to connect the red wire from the light socket only into the number 1 terminal or can it go into the number 1 terminal or either one ?
@petrfila53714 жыл бұрын
Hi Dave, our single gang switches have just 1 white and one red cable connected to them. In one room, the red cable goes to socket 1 but in the second room it goes to the C socket. Which version is correct?
@dombarton24832 жыл бұрын
When will you be able to show us how to install a ceiling fan..that is one you havent done...great video!!
@estermsembe28593 жыл бұрын
good my lovely brother👍
@21dolphin123 Жыл бұрын
brilliant
@catweasle5737 Жыл бұрын
Thank you. To the point. Is this the same for Australia?
@baro114 жыл бұрын
🌺🌹❤️🥰👍
@nathaneast4846 Жыл бұрын
You do great vids mate, my father in law was a sparky too, and he left the house wired but never finished (30years) he only has one cable coming into the light switch, why do you think that is? I’d love to send you some pics or vid of what’s left..
@lillybee28772 жыл бұрын
thanks
@carbuncle19772 жыл бұрын
is it safe to twist the copper wires if you set-up a power line for the switch?
@yingle60273 ай бұрын
What is loop used for? Should I not worry about it? Thanks.
@danielbedggood81994 жыл бұрын
Hi Dave, thanks for this. To add another batten light to the circuit, would you just feed from the first batten crimping wires into the same terminals?
@andywright26064 жыл бұрын
Hey Sparkydave nice straight forward video mate, thanks for sharing. If you wanted to run a second, third, etc light/s that are to all turn on at the same time from the same switch, would you just connect another red, black, green wire into the same spots on the first batten fitting and on to the next light and then repeat for the third light, or is there a better way?. Cheers Andy
@KrazeeKiwi3 жыл бұрын
Bang on. That way you have no more than 2 sets of wires at each fitting.
@michaelcostello69913 жыл бұрын
Can this cable size supply the 3:1 lamp heaters and fan combo. The heat bulbs are 275 watts each * 2 off
@kayzcamomileuploads45643 жыл бұрын
Good on ya mate
@yak9147 Жыл бұрын
You and your hands know this well.
@DavidBerquist3342 жыл бұрын
In the US light sockets wired in thread of light bulb is neutral button on the bottom is live brass screw live silver screw neutral consult with codes before doing electrical work
@maurieknight51202 жыл бұрын
Hi,mate, can you use cable that has the current coloured wires.
@PianoBlack623 жыл бұрын
Legend
@stanleyjaxen87593 жыл бұрын
so what about a second light bulb? can it be wired in series to the first?
@phamv013 жыл бұрын
Nice
@kopexkiwi3 ай бұрын
What wire goes on the other unused hole opposite to the green on the light mount?
@bowendawson84153 жыл бұрын
Hey Dave, just a question in regards to video, assuming youve opened the light switch and replacing with something alot newer, how would one determine which wire is going to the switchboard and which is going to the light, cheers
@KrazeeKiwi3 жыл бұрын
Before removing the wires from the old switch either a) look at and remember which wires go to common and 1 and loop, or b) remove each wire one at a time from the old switch and install into the new switch. ie remove the common from the old switch and install into the new THEN same with each other wire one at a time.
@hiewyАй бұрын
The switchboard wire is always live. Regardless of whether the switch is on or off. Best way to test is with a multimeter, flick your switch off and on while testing which one remains active
@yewtubez2 жыл бұрын
Hey Dave, to switch on my light, i have to flick the switch up. is there a way to reverse it? i could turn it 180 degrees but the red marker will be facing the wrong way and would annoy the crap out of me.
@hiewyАй бұрын
Reverse the feed wire with the traveller wire
@seamuswarren3 жыл бұрын
There is only a single red and black behind my switch. Loads of cables behind the ceiling battens. It seems the mains power daisy chains in a channel cut into the cement ceiling.
@R_a_c_o_o_n3 жыл бұрын
Hey mate, with this entire new circuit, does this have to come off an entirely new CB?
@R_a_c_o_o_n3 жыл бұрын
@@MrMagoo-vt8cu haha I meant circuit breaker, but thanks 😄🤙
@user-wd4zi7hs2v4 ай бұрын
Hey there man, I just had an question on the thing you pointed out since I just started an VET course to become an electrician, I was just wondering if it matters where you put the red part in the light switch, because we had an practice session and I couldn't understand what I did wrong. Also, does the one connected to the power have to be in control and the one connected to the light bulb have to be in 1 or 2, And if not, would it still work if I were to put the red wire from the light bulb to the control and the red wire from the power to 1 or 2, would this way still work ? I also don't understand where the common, 1 or 2 is within the light switch since it wasn't pointed out in the material we use in the course. can you please give me any tips on these or any other ways to try and make it easier for me? Sorry for wasting up a bit of your time but I appreciate you trynna help us rookies, much love ❤
@shijunming80922 жыл бұрын
Hi Dave, I am in australia. Can I look at your video. Or two country with different standard.
@jesushchrist25675 жыл бұрын
hey bro can you make a video showing how to wire a socket for an LED downlight that comes with plug?
@sparkydave5 жыл бұрын
Yeap defo, keep an eye out
@hemiandreassend38482 жыл бұрын
Hi Dave how would you wire 3 separate rooms (lighting circuit) on the one circuit? Cheers
@ceejfletcher2 жыл бұрын
Best of luck hemi
@rickyanthony2 жыл бұрын
You'll need a three-way switch
@pillow7306 Жыл бұрын
thanks, not qualified yet, but if i do or do not try to hardwire a fluoro in the garage 🤐 at least i know how to do it propperly
@deck38844 жыл бұрын
Thank you for sharing. In Australia I would have to pay someone at least $150 to do this. They'll try to scare you off. :)
@Ludty34 жыл бұрын
Hey bro, in my holder I have 5 cables, green black, red and white one and a red one again( lite one) you can help me? Where I can put the white one?
@Papahaha4 жыл бұрын
Hire an electrician
@klemmzagala26493 жыл бұрын
Youre here in auckland, mate?
@leduavunibola3110 Жыл бұрын
Just a question why do u use light wire instead of switch wire
@philwalker64442 жыл бұрын
Hey Dave, for a plastic light with no earth terminal, what is the best thing to do with the earth wire at the light?
@nateroa4397 Жыл бұрын
Just terminate it with a clip or tape
@gadwalidost4 жыл бұрын
Hey bro where r u from
@jaimepicornell5773 Жыл бұрын
what a voice
@simonprivate51313 жыл бұрын
How would I plug it into a 240v wall socket?
@simonprivate51313 жыл бұрын
@@MrMagoo-vt8cu ok thanks smart ass
@thefiveloose2 жыл бұрын
How do I wire a 6 gang light switch??
@phillipsmith64162 жыл бұрын
I Sorry meant number 2 terminal or either one
@markthompson51134 жыл бұрын
What happens if you put the red wire from the switchboard into the #1 and the other red wire to the light into the common by mistake
@markgolland50273 жыл бұрын
Nothing at all it will still work.
@hiewyАй бұрын
On will be off, off will be on
@francisnimal51726 ай бұрын
I followed like this but fuse gone . Why?
@DavidBerquist3342 жыл бұрын
I thought Australia wire is red black green stranded wire about 2.5mm
@Jean-bj5md2 жыл бұрын
Hi Dave it's my first week as an electrical apprentice and I'm finding my self very curious and knowing how all this is done
@krkmjr84292 жыл бұрын
what about now
@Jean-bj5md2 жыл бұрын
@@krkmjr8429 I got fired lol 🤣😅🤣😅🤣
@krkmjr84292 жыл бұрын
@@Jean-bj5md damn bro it's fine tho there is more jobs