Really appreciate it! I’m happy with it so far!

Hey I appreciate it! Thanks for the continued support!

Thanks a lot! I’m happy with it!

I agree! Definitely do it!

Thanks for watching!! I think it’ll be secure with the screws and then bolts like I used. However, someone mentioned this morning that they used jbweld in those pockets, which couldn’t hurt. Might do it to be safe!

Thanks!

I’m all about updates! Stay tuned. I will say that I definitely know it’s there-quite a bit lower pulling in and out of driveways for example.

Thank you!

Thanks! Yeah completely changes the look! Not too expensive either!

I appreciate that man!

Thanks for checking in!

Jbweld is a good idea. I might do that!

Thanks!!

Awesome man!

Thanks brother! I was surprised at how well it fit. You never know with this stuff sometimes! Really changed the look!

Thanks man! I appreciate the kind words. I’m a murdered out type as well but I have to stick with the silver emblems. I like them still lol.

Haha thanks! Yes I really didn’t mind how it looked before and didn’t have very high expectations for the splitter, but once it was on, I was really diggin it!

@@SpeedCultureStudios it's a really good look. Perhaps even better than the sport bumper 👍

Arty Coole I think so actually!

Thanks! That’s awesome. You’ll love it!

I’m torn when it comes to cameras, electronics, and moving parts! They are cool to have but expensive to replace when they stop working. And the DO stop working lol. I’d be fine going back to my older cars with all manual parts and no cameras haha

@@SpeedCultureStudios ive stopped buy my vehicles and lease them. Benefits cheaper payments, never upside down when time to get a new one, and always under warranty. The cry then you don't own you vehicle but the people who finance their vehicle don't own them either. The other benefit is by leaseing you are always in a like new vehicle. Ive been buying my cars for 30 years and ive never kept one longer then 2 years.

I’ve never kept one longer than 2 years either-many of them less than 18 months. AND I’ve always made money on the sale. That’s why stay away from leasing. But that’s a different topic haha

@@SpeedCultureStudios Those are rare conditions your sitation of making money. Only way these days not to be upside down ever is put a sizable amount down or buy used and get a spectacular bargain. I bought a 1,500 odo used Yamaha R6 anniversary edition and cleaned it up and gave it love. I had it two years 13k mikes. Put an exhust on it, steering damper, zero gravity screen, no cut frame sliders, steel braided front lines. When i sold it i took off the main parts sold them and sold the bike for 500 more then i paid for it. www.flickr.com/photos/freelanceshots/6955169024/in/album-72157623614267941/

@@SpeedCultureStudios You buy a vehicle/s used and drive for 1-2 years out of warranty or over warranty miles then highly likely depending on year/condition where you have the worries and or added cost of the repairs some very expensive. With this stated making the purchases you speak of less lucrative or maybe putting you in the hole. You buy any...any new car in the realm of reality and you dont put at least 5-7k cash down then your upside down when come to trade in 1, 2, 3, 4, 5...years later. Big benefits to trade in and that includes one which is time and resources which can be very costly. I never have 5-10k saved up just staring me in the face and i like to drive brand new vehicles with 24hr included roadside assistance.

Thanks!!

Thanks! The wife is generally not interested in driving it. However, I have discovered that she has taken it to work a couple of times while I was out of town.

Thanks man!

Thanks, Patrick!

They market very well, that’s for sure. There are other polishes out there that I like a bit better, but this was certainly a good deal for this kit!

@@SpeedCultureStudios What do you prefer? My Q is black as well, so I always try extra hard to get that nice slick black shine to really show and last.

Turbojugend Proper washing is important to not create swirls/cloudy finish. But I’ve always liked Maguiars quick detailer. I’ve used turtle wax black box with success on black cars. It’s a lot of work, but looks fantastic. The problem with this car is that Infiniti paint is so soft, it’s difficult to find anything that is really good with it. I’ll be trying out this chemical guys stuff very soon.

Yes--just the underside though

I cannot use the rino Ramps now with the splitter.

Don’t remember 😂

Yes it was lowered. It’ll be too low for ramps unless you use a board on approach but also don’t go all the way up

Copy away lol! It’s a good setup and that’s why I’m documenting it and trying different things.

@@SpeedCultureStudios it is, cant wait

No changes. Same splitter

Not necessarily. A 2015 lip will likely not fit the 2018 properly.

Nice. Considered carbon fiber, but not enough contrast with my black car to justify the price!

Did yours fit better? Is it a 2014 - 2017

Steve Herold fit better than what? The car is a 2015. The splitter is for 2018-2019 base. Fits great.

@@SpeedCultureStudios I gotcha I got graphite shadow color

Amazon has a ton of sellers.

Sag in the middle*

I actually just got a little piece of black plastic tube using it as a spacer. Cut it down to the right size, placed it between the splitter and the bumper and just ran another small bolt up through it.

@@SpeedCultureStudios thank you so much

amzn.to/3cJasas

Don’t like the look of the engine cover. The typical 3m tape you find at Home Depot or Lowe’s is what I use. I don’t recall the weight, but it’ll be the strongest one you find on the shelf.

@@SpeedCultureStudios thank you!

Hard to say what the difference is-they are all basically the same-unless they are single piece

Just bought some small bolts and fender washers and matching nuts. They can be whatever size you want basically. Just don’t go too small or too large.

Yes!

Threw it away and replaced it with a z1 undershroud

@@SpeedCultureStudios Still replying to comments 2 years after the post, i see you. I was curious because tbh i skimmed through the video, are you able to use the stock skid plate when you install the splitter or does it have to go? Thank you

No.

Might be slightly more durable but you have to be careful man lol. I’m lowered over 2 inches and have had this same splitter for almost 3 years

@@SpeedCultureStudios yea I feel you about being careful but man LA roads are so trash and every driveway is different some are so steep.. maybe make a video on how to drive lowered car lol

@@Allcity323 totally get it!

Perfect! Just put a little brace in to help resist sag

@@SpeedCultureStudios lol Sold!

Yes you can get to the nuts. Absolutely necessary! I’ve never heard of anyone attaching splitters with just self-rappers and tape until I became part of this community lol. Splitter is still doing fine. Scrape everyday leaving work and she’s still holding strong!

Thanks glad to hear it’s holding up. I was a little nervous about the 3 piece NY winters and roads can be harsh. I am going to purchase from Redline360 they have a 3pc lip available for my 2018 Q50 Base model. Appreciate all the videos and tips you share.

christopher amerally Thanks! Just so you know in case you missed it-this is lip is actually for the 2018 base.

I suppose you could use rivets, but you need to distribute the force, so the washers are actually more important than the nut and bolt. A small rivet will just pull right through if you hit something.

Thank you I appreciate it. I will just use a washer bolt and nut.

Depending on the angle really. Straight on it looks perfectly level. I’ve scraped a couple of times leaving very steep driveways so I think one side has a slight tilt now lol. The problem is the underside of the bumper is not level-has a slight slope. It’s all in how you mount it.

Exactly. The bumper noses up and there are those platforms on the splitter. I know the brand I got they weren’t angled enough to counter the bumper angle but didn’t know how these were. It doesn’t seem as bad to me on yours but you’re also lowered and raked down a little better than mine with stock suspension. Overall, yours does look better than mine did and it’s great to know the newer years will also fit our years.

I actually don’t have a diffuser recommendation. I got a great deal on mine, but I had to work on it a lot to get it to fit nicely so I would not recommend it.

@@SpeedCultureStudios what diffuser do you have?

@@m.m14433 Its just an ebay special for now. It doesn't look bad, but I wouldn't recommend it. It took a lot of work to prep it and make it work. Not to mention I had to pain it.

Fingers crossed!

Touch less, yes. Previous owner had been through them for sure-reason I did the paint correction

Thank you! It’s lowered on TEIN s tech springs for right now. Lowered about 1.25 inches all around.

@@SpeedCultureStudiosdo you use them with OEM shocks ? Have you noticed any change in comfort ?

@@Berkay-vj8wu oem shocks. The Tein s tech ride great.

If the surface is prepped properly, you won’t have any issues

@@SpeedCultureStudios thanks

Never measured it. It probably an inch wider than the bumper on each side.

@@SpeedCultureStudios could you do some measurements for me when you get the time plz? I would appreciate it. I think I'm going to retro-fit this splitter on the lip I have for my g37. Just need to how long it is, and the dimensions where it start to curve at the front to the outer edge.

I actually think I’m going to try and paint it to see how it looks. If it sucks then I’m going to just get the gloss black grill. Not confident in my wrapping skills for the contours and I’m not paying anyone $200 to do it when I can get a complete grill for $150!

Speed Culture Studios why don’t you just wrap the outer overlays black? I am thinking ab doing it

That's what I'm talking about. The corners have a weird contour to them. Its probably not as hard as i'm thinking, but I just don't know if I want to lol.

2015

You must not have used bolts. This thing is not coming off unless it gets ripped off.

Speed Culture Studios yea i used 15 self tapping screws with washers thought that would hold it😂

@@SpeedCultureStudios I went through three of these. They are ABS and not urethane. These are the cheapo $45 lips but they look good! You did a good job on the install, I broke mine from driving in deep snow, hitting stuff, etc.

@@rchumsae deep snow will do it. Mine still holding strong. 2 years

Yes--non sport only.

Yes perfect!

2015

Sorry for the delay--Yes it should fit a 2014. Its the exact same bumper as my 2015.

15

Sorry--Didn't see this comment!! I think link is in the description, but here you go: amzn.to/2VIFHti

Non sport

@@SpeedCultureStudios I think I will get it, thank you. Do you still have this mod till this day?

Yes over 2 years now!

@@SpeedCultureStudios I really appreciate how you always reply! I've always wanted an exhaust system on my Q50 2015 AWD. I want to copy your exhaust system because it sounds so good and its reasonable priced! I am on your amazon "Speed Culture Custom Exhaust" and I see a total of 4 pipes and 1 Exhaust Tip. I don't know anything about exhausts so I just plan on buying what you recommend and have the car store install it for me. The link I'm on is this one: www.amazon.com/shop/speedculturestudios?listId=2OIQDSX04XY3S. My question is : Which parts do I have to buy from those 5 items on your list? And after, what do I tell the engineer in the car store to do? Thank you so much for helping out a beginner.

@@tarotea123 Just check out the video I lay out the quantity of each. Otherwise, when you’re on the Amazon store, read the description of each item-I wrote some notes for reach to make it easy to follow. 1 borla, 2 resonators, 1 set of tips

Coming haha! Been working on some house projects and organizing a car show for this weekend that has taken up a lot of time!

Need bolts

You must not have bolted it on

19 x 9.5 +35

Speed Culture Studios and what wheels are those ? Bro your car looks bad ass...

@@ibarrafamily5535 Thanks!! These are the DR53 by Drag Wheels. They are a big supporter of the channel. Inexpensive, but great quality!

It’s in the description man!!

Speed Culture Studios sorry bro🤣

Jonathan Doodnauth lol no problem!

Hahaha I’ll have to rewatch it lol

lol. Didn't try to hide it all that much.

Thanks for the suggestion!

Not really Jenky at all. Lasted for over 3 years with 0 issues and always looked good

Yes sport lip and no sport lip are much different.

I’m having trouble they all pretty much look the same , with different descriptions

@@alpha5033 I feel your pain dude, there are soooo many damn trim levels. I would Try to search your VIN