Speeduino ECU Tuning Guide | Part 1: Project creation & Sensor calibration

Speeduino ECU Tuning Guide | Part 1: Project creation & Sensor calibration | Megasquirt, KDFI etc.

Рет қаралды 5,257

Күн бұрын

#tuning #speeduino #megasquirt
If yoTo show support for what i do + some benefits, check out my patreon: patreon.com/Throttlebuddies?u...
In this video Series we will be showing you how to tune a Speeduino, Megasquirt or KDFI based ECU. Basically everything that uses Tuner studio. In the first part we show the creation of a project and the sensor setup. If you have any questions about this, your own projects or need a tuning service, feel free to contact me: / _throttlebuddies
Camera Gear:
Sony Alpha 7 (first Gen)
Meike 85mm F1.8 (Manual)
Sony Kit 24-70MM
Rode Smartlav with LC1
Rode Videomic

Пікірлер: 14

@throttlebuddies6356 6 ай бұрын

i am tying to explain as thorough as possible because that has not really been done before as deeply, so If you hae any questions regarding things in the video, feel free to ask here or, if you hae more complex questions about tuning, your project or need your car tuned, feel free to hit me up instagram.com/_throttlebuddies/ To show support for what i do + some benefits, check out my patreon: patreon.com/Throttlebuddies?L

@sandromartins20 3 ай бұрын

I'm trying to deepen my understanding on the subject because my knowledge about the platform and tuner studio is very limited. Your videos are exactly what I was looking for. Thank you!

@yuppiecruncher 2 ай бұрын

Thank you! Subbed and I'll be checking out your patron!

@throttlebuddies6356 2 ай бұрын

Thank you very much! There will be more benefits in the future!

@tragedygaming3186 2 ай бұрын

Thank you for these videos please keep them comming, they are a lot of help. Could you go over the manual configuration of the speeduino, ua4c if you have it. I.e what junper for thay setting and if a vr conditioner is needed. Im in the us trying to get an ls started on the ua4c. Ive got spart injectors working and working out the kinks.

@throttlebuddies6356 2 ай бұрын

Thank you! as for jumpers depends on the unit you buy they might not be configured to use jumpers depending on how they are built. the vr conditioner in my case was just an add on board that i ordered on the site together with the ecu

@charlestorruella8591 27 күн бұрын

Ever do any all motor k series

@throttlebuddies6356 27 күн бұрын

havent done that in perticular, tho i have tuned many different engines. also some purely built NA cars.

@charlestorruella8591 27 күн бұрын

@@throttlebuddies6356 I'm building a k20a3 with VTech locked it has vtc and I'm having a hard time trying to wire it to the speeduino and how to control it I've had some tell me you can only control it on closed loop Im very new to this it's my first ecu project been a V8 carb guy ally life (52) and trying to gain as much knowledge as I can but no info on k series just missing tooth crank sensor and one tooth cam please help maybe get me In the right direction if you can

@throttlebuddies6356 26 күн бұрын

@@charlestorruella8591 vtec in closed loop doesnt make much sense. Usually you have a table where you control it on open loop with set values depending on rpm and load (tps or map that is) if you want to send me a dm on insta, maybe ill be able to help you

@murraymadness4674 Ай бұрын

are you then responsible for any damage if hired?

@throttlebuddies6356 Ай бұрын

depends. while tuning and if anything goes wrong there and it is my fault yes, but nor do i or would somebody else guarantee that after this because these ecus do not have enough safety measures built in to keepthe engine from blowing up for example if you were full hrottle for like 20 minutes without an oil cooler or whatever..

@murraymadness4674 Ай бұрын

@@throttlebuddies6356 lol you give a disclaimer about damage and then say you can be hired. Just teasing you and adding a comment. I have a few speeduino boards for my racecar..that I sold. I think my next one will be electric.

@throttlebuddies6356 Ай бұрын

@@murraymadness4674 yeah that disclaimer was more like for the videos any changes that anybody does themselves haha when i get hired to tune whole different story obviously lol 🤣