Thanks for the answers. I'm VERY glad Spektrum isn't forcing Android across the line. At the same time, the NX doesn't offer enough to justify replacing my DX9 and DX6. If I had to buy new, I'd likely get a Radiomaster but if I wanted Spektrum brand, the NX10 looks nice.
@RuudyL2 жыл бұрын
I looks nice, dont buy it
@kalgrandy2101 Жыл бұрын
I was on hiatus from the drone scene for the past 5 years and already this video is showing me the ropes again. Thank you. I'm also a Spektrum guy so I'm excited to get my hands on the new transmitters
@StevesRC Жыл бұрын
Glad I could help!
@Jrod_FPV3 жыл бұрын
Great idea on the nameplate antenna! My crossbar is usually buried in my lap where I rest the radio when I fly. So this is perfect for me!
@StevesRC3 жыл бұрын
Definitely makes sense!
@leerenslear10643 жыл бұрын
good way to get testicular cancer !!!!
@charlesjreyes7263 ай бұрын
Thank you.
@johnrobinson11402 жыл бұрын
great info I'm getting the 8
@MR57LV3 жыл бұрын
I’ve had NX6 for month now. Flown many times. I flew week ago. Today I tried to charge it for tomorrow flying. Noticed green light didn’t come on and battery really low. It was 3.2. So I let It charge for awhile and checked it again and it was 2.9. Then It finally went dead. Nothing on screen not charging. I did notice when I stopped charging earlier to check voltage I noticed there was a running time just above actual time. It was like 8hrs and 10 minutes. I haven’t had transmitter on for days so don’t know what that means. What actually is that running time. So anyway what happened? Did I get bad battery? I just ordered the 6000mah upgrade.
@jasonedlund72823 жыл бұрын
This was great info! I’m looking to get into complex sailplane and trying to decide between dx or nx 8! This helps me a lot making my decision just too bad that not available for about a month
@StevesRC3 жыл бұрын
The NX10 just started shipping in the US.
@jimmyhaley7272 жыл бұрын
you might want to wait a while, NX series are giving lots of problems, mine keeps getting a red screen warning and it is hard to get it off,, mine is NX8 and with no updates as it was working fine,, updates on PC are usually problems also
@Commandodesigns6 ай бұрын
Random question. What are the little covers above and below the gimbals for?
@StevesRC6 ай бұрын
That’s for adjusting gimbal tension and stuff
@Commandodesigns6 ай бұрын
Cool. thanks.@@StevesRC
@oosul723 жыл бұрын
Thanks
@isaiahfurrow74143 жыл бұрын
Looking to get the NX8, as I have gotten enough life out of my original DX6i(pre DSMX) that I never ended up with a DX6/DX8... Nice to know they do have diversity 2nd antenna... was trying to find that info... One question, Horizon website lists the NX8 with a transmitter strap... but the manual doesn't list this... as the NX10 manual does list strap, as well as stickers(i like stickers)... Does the NX8 come with an all important strap? Another question, I get the charge cord thing, or battery differences... as that helps hit a price point, and lots of folks might buy the cord or bigger battery later, which is $$$ for Spektrum... but dangit, tell them fools to put STICKERS in every single radio and reciever package.... EVERY SINGLE ONE!.... Stickers on our planes, stickers on our crawlers, on our racers and bashers, and on the AUTOMOBILES we drive to and from the field, track, etc... Used to have a Spektrum hat and tee shirt... gonna have to order more swag with my NX radio, and guess I will have to beg a few sticker sheets from the Horizon guys too...lol Lastly... the big difference in the radio itself...between NX8 and NX10... 2 slider switches on the rear, 2 channels, and the gimbals...(not counting battery and charge cable)? Would the gimbals be a huge deal? I got over a decade out of the DX6i that I preordered...kinda want the NX8 for warbirds and just that tiny bit of extra in case I move beyond foam park flyers, etc... but don't see anything in the next decade bigger than like a carbon Z cub, the 1.5m P-51, and planes of that size range... would an NX8 be a good next radio(I have a case these days, so might get a decade out of my next Spektrum radio too)...or with those planes do you see a reason the NX10 would be a lot better...? I don't fly super often, so never wore put a gimbal on the DX6i, I did have to reinforce 2 of the trim tabs though, second time in there I just did all 4 even the ones that still worked fine. Thanks fornthe video!
@StevesRC3 жыл бұрын
Hey there. I've confirmed that the NX6 and 8 all have straps/stickers. We do have new spektrum clothing coming like in the next few days too available on horizonhobby.com. As far as the Gimbals, you aren't likely going to notice a feel difference and if you are a standard user, the changes of your POTs going bad are very very low. The Hall effect is just a nice touch for the higher end radio. NX8 is the best next step radio that will likely last you a long time. However, I'm always for getting a bigger radio than you need now if you plan on growing up in the hobby and needing more channels. Buy once, cry once :)
@brendanomara3393 жыл бұрын
I purchased a wingnuttech controller for the lights on a radian 2m plane. Trying to find a video on how to set channel 6 on the receiver to the R Knob to adjust the lights on the controller. Any ideas where I might find such an animal?
@The-Fly-Kid3 жыл бұрын
I LOVE YOU STEEEEEEEVE! 🗣️😂
@malelonewolf803 жыл бұрын
How is the new antenna placement any better? When the second antenna were in the handlebar at the back, it was 90 degrees to the primary antenna, which is optimal for diversity.
@Jake-mm1cz3 жыл бұрын
I have been wanting to purchase a Spektrum Transmitter for a while now . Glad I waited . Couple of questions for you . I have been using Frsky transmitters among others for quads & airplanes . So here we go . How or where can I find a list of the airplane models in the Nx10 ? Is the list brand specific ? Does the Nx10 support all new & older model receivers & ESC’s ? Is the Nx10 able to use Jr modules ? You stated Crossfire is supported . How is this going to be possible if there isn’t a type of Jr module adapter ? Are they capable of using FPV goggles for drones or airplanes . Is another brand receiver able to plug in for 5.8 ghz signal ? Analog & or digital ? Lastly do you offer any discount codes on receivers if purchased with transmitter . Since it doesn’t come with any ? Thanks
@jerrygiles16612 жыл бұрын
Advertising for variometer does NOT list NX comparability, only references DX??
@janrc Жыл бұрын
The reason for the new antenna location is not reasonable. It is much more likely people hold the radio up instead of down. I guess it has more to do with the more easy assembly of the antenna which saves money.
@kennyharke3662 ай бұрын
My new NX10 froze up and only shows the logo on the screen. Unplugged the battery to get it to power off. What is the solution?
@mahoneytechnologies657Ай бұрын
I like the fact that there is no android operating system, I like instant on ready to go Systems, a separate Computer, Laptop. I pad connection is the way to go, I don‘t‘ Want to use my radio to check my email! And I surely want to wait for my radio to Boot Up !
@StevesRCАй бұрын
Definitely has its benefits for simplicity!
@Daniel_SWE3 жыл бұрын
When I started to think about upgrading to an DX8 I heard something on a stream that made me suspisious. I wrote to Spectrum support and ask if it was about to be replaced in a "near" future. The answer I got wasn't any time soon. Now they release a 10 channel radio and discontiue the DX8. Feel quite cheated.
@StevesRC3 жыл бұрын
Well our service teams cannot speak about and do not know our future product plans. Sorry you feel cheated. The radio you purchased will service you well for years to come. Additionally, we are still supporting that radio for years to come.
@Daniel_SWE3 жыл бұрын
I do hope they will have an upgrade deal when get to the stores. A 10 channel radio was what I was looking for but couldn't afford the IX12.
@FORDEVR3 жыл бұрын
Question 1 My NX 8 just says “thumb twiddling” when I hit log in. Just does that until I press the roller or turn it off. I’m already on wifi. Question 2 How do I get my 8020t receiver into safe. I tried Putting in the bind plug then plugging in the battery then unplugging the bind plug and finally binding the radio. The radio does bind,but not in safe mode. Thanks. Great videos a 8020t video would be great. Not a lot out there for it.
@vinnyavalanche3 жыл бұрын
Ill stick with my dx9black
@OutbackKanga3 жыл бұрын
Bought a new dx9 black today same price as the nx 10 ... choose the dx9 over the flimsy nx also there is no way transmission distance wont suffer dropping down to only using a single 3.7v cell...makes it and easy choice to buy the older 9x9.
@BladeScuffer2 жыл бұрын
I just bought the NX10 and I am bummed that the Crossfire telemetry does not work like my ix12. The receiver works for flying but telemetry for signal does not. I know my quads are set up right because it works with the ix12. Guess I will return it.
@jimh29512 жыл бұрын
Thank you for the great answers. Can you tell me what the battery charge life is in the NX10 before it is drained when the radio is not used during the winter? My DX9 and other radios have a real snap switch which cuts the power 100%, but the NX10 had a soft touch switch which has a little power being used all of the time. Thank you
@rayray153073 жыл бұрын
Sense going from the DX series to the TX series the battery drop from a two cell to a single cell did the transmitting power drop as well
@StevesRC3 жыл бұрын
Nope. Still fcc compliant and power isn’t reduced.
@mikehundley98767 ай бұрын
Do a video on NX 10 and Aura 5 lite
@StevesRC6 ай бұрын
Unfortunately I do not own an Aura 5 lite. Thanks for the idea though!
@FENIXRC2 жыл бұрын
Saludos amigo ✈🤝🏼✈
@keldpedersen51772 ай бұрын
Hi I try to update firmware with USB cable and got at file to put in rut directory. I forgot to change the file name from SPMTX to SPMTX.SAX, and now i cant turn the radio on. What to do? please help. Best regards Keld
@bethmotgomery2662 Жыл бұрын
Excuse me. I have some questions. Firstly dose this transmitter work with Volantex rc,Fmc,and syma aircraft? Secondly I was thinking that with multiple people with me using a transmitter flying 1plane each, I thought of using wireless headsets and make a little Air traffic control tower to monitor our flying. what do you think of this idea? Lastly would it be possible if I reuse the box that comes with a plane or helicopter to make a hanger to store them when not in use?
@franknapolitano91442 жыл бұрын
I'm so glad I invested in Futaba's simplicity and Transmitter consistency .
@charlesjreyes7263 ай бұрын
Will I be able to have a separate switch for landing gear and one for reverse thrust and other features for my E-flite 80 mm F-16 with the NX8 radio for this jet?
@StevesRC3 ай бұрын
Of course!
@aquadslifefpveee58923 жыл бұрын
I was moments away from doing a pre order on the NX 10 today until I watched this video. My excitement bubble was popped when you said the radio doesn't support the new immersion RC ghost system........ Do you have any time frame information of when that may happen that would change my mind and still order this radio?
@colesheehan9929 Жыл бұрын
I can not find any ix12’s for sale at all. Do you know the reason why? Thanks so much.
@northstar68883 жыл бұрын
Any 10 CH. receivers yet?
@dtkristy13 жыл бұрын
Great video. Thank you. Does the NX10 have vibration alerts like the DX9?
@StevesRC3 жыл бұрын
Of course!!
@ruimessias13023 жыл бұрын
It's nice looking new NX generation but not so impressed with the interface and plastic quality. My last for 3 days and have to send it back for fixing the problem. Interface collapse and screen keeping flash non stop. My old TANK DX9 probably the best spektrum made radio. Hate the IX and try the NX,very disappointing.
@Hunt22718 күн бұрын
To me spectrum nx 10 is way better not only quality also simple not as complicated as radiomaster tx16s. Simplicity is a key. In which case even after learning how to use tx16s i still using my nx 10 .spectrum is best of the best 585$ it steal. Plus if u want all the options on tx16s it will run 600 $ for that i get spectrum nx 10 . It homicidal radio not for everyone 😅😅😅
@marksteward58423 жыл бұрын
Question? What is the process to check the charging ability of the battery in the nx 6. I have a new one that has been charged twice and now acts likes it is not charging. Also then, what is the trick for taking the batter out to replace if it is bad.
@patton949543 жыл бұрын
Any difference between the NX6 and NX8 besides the extra channel?
@marcw2013 жыл бұрын
I’d like this confirmed also.
@susansettle849311 ай бұрын
i have dx8 one, how do i load my planes into the nx8?? will it work for dx8 one i have been told that it would with dx8 two??
@arlemooldijk15953 жыл бұрын
DSM2 is not allowed in Europe anymore with new transmitters (since 2015), so European transmitter models probably won't support it (just like previous transmitter models). 😉
@StevesRC3 жыл бұрын
Definitely. Addressing the US market here ;)
@ericclark8522 жыл бұрын
Purchased my NX a month ago from tower hobbies and now it just drains my battery if I leave it plugged in over night ?
@StevesRC2 жыл бұрын
Sounds like you should get in grouch with support after you try updating firmware
@edwardenglishteacherrcpilo72352 жыл бұрын
Please help … 😊☺️Which 10 or 12 channel receiver do you recommend to use with this NX10 ? 🤷🏻♂️
@rcdavidk3 жыл бұрын
I just got an NX10 and ran into the same Micro SD Card problem. I called Horizon and they recommended no larger than an 8Gb card, lower than Class 10. This size card and class were first introduced 10 years ago. Why use such an old technology... unless the purpose is to do away with a card slot altogether? The smallest card I could find was an 8Gb Class 10 card and it only works sometimes. If Spektrum is going to force the use of an old tech, then provide the card. This is kind of weird. With the inclusion of WiFi for updates and a USB Connection to have your TX show up as a drive on the PC, why have a card slot at all, specially one you can't get a card for?
@charliemarchiony79143 жыл бұрын
Thanks for the awesome video! I really like the folding antenna. Can you recommend a more compact transmitter case. Right now I’m using the basic Atomic case with my DX8 G2
@StevesRC3 жыл бұрын
I've not found one yet, but stay tuned :)
@chrisw8503 жыл бұрын
I have the NX8. In camber presets. I set the end points at 100% on both ends. I only get 50% of flap and aileron travel. When I max out servo travel to 150% The camber presets travel goes to 75% max How can I change it to get 100% travel?
@johnrobinson11402 жыл бұрын
yadda yadda yadda pick ONE question and answer it fully. maybe an actual technical question.
@StevesRC2 жыл бұрын
What question would you like me to answer then?
@frankarmstrong93143 жыл бұрын
Where can I buy a 32 Gb class 6 Micro SD card - most are class 10
@DJBBBOSS3 жыл бұрын
I know Frank.... Here in the UK class 10 is the standard now...
@dagobertosalazar2 жыл бұрын
IMPORTANT NOTE: Regarding the question of the NX transmitters working with DSM2 receivers, be very aware that the transmitter being sold in Europe are NOT, and will NOT BE, compatible with DSM2, only with DSMX. It is a regulation issue that most probably is never going to change.
@StevesRC2 жыл бұрын
Yep
@joe721103 жыл бұрын
Can you add an instructional Video on how to hook up crossfire/tracer nano to the NX radio?
@adamrs87622 жыл бұрын
Have a nx8 transmitter but won't connect to my dsm2 receivers I've got. Will connect to dsmx fine. I'm in the UK and was reading something about the new nx series won't work with dsm2 ???? Is this true?
@StevesRC2 жыл бұрын
Yes unfortunately EU versions of the radio are not compatible with DSM2.
@davidbrown28063 жыл бұрын
What would be really interesting is a comparison of the NX10 to the iX12. The cost difference is huge for 2 channels. Is there enough feature increase to justify the cost ?
@StevesRC3 жыл бұрын
I can certainly do a video on that! Good suggestion.
@henrideschamps31912 жыл бұрын
I have received today my new NX8 and i would like to change mode 2 to mode 1 , and i am not sure for the procédure , could you help me to do , Thank you
@BinderDundat3 жыл бұрын
Hey Steve, just got my NX10. It’s registered and updated, only problem it does not recognize that the SD has been installed. Try to download and it just says No SD card. Have the recommended class 16gb card. Can’t find a solution in the manual. Thanks
@mikebird97173 жыл бұрын
Are all radios set up for an air craft? I bought this from a respected store and he said there is no different to air or ground. Is there a radio that set up just for ground or do I ignore the names and icons of the screen and just set up what I want for my servos. Really disappointed I can have symbols of car or truck and set up related and not an air plane on the screen.
@slugosrc12563 жыл бұрын
I'm having trouble getting my serial number on my NX6
@loudimarco44462 жыл бұрын
Question please, sorry if this is the wrong area to ask. Using the NX8 with a AR8360T. I am in the forward programming and its an endless loop of “ did you configure your airplane” hit next and then right back again. I turn the throttle switch off, or on, makes not difference. Can you help with some advice please, thank you
@StevesRC2 жыл бұрын
I would honestly try a new model file and see what happens. Did you import a model?
@johnmueller84482 жыл бұрын
Hi Steve just picked up a Nx8 . Question will this radio fit into the spectrum dx9 case??
@gliderriderАй бұрын
Random 3 year late question. If I buy a used nx or even dx transmitter, will I be able to get updates? Will it work or did I just buy a brick?
@gliderriderАй бұрын
There is something on rc groups and it’s a nx rig that has had two owners.
@StevesRCАй бұрын
Yes no problem the NX are still supported obviously the DX just released the last update but are still good radios.
@em3-46 Жыл бұрын
evening sir, i currently have the dx7 gen2, if i purchase the nx10 could i simply take the sd card from the 7 and put into the 10 to transfer all info.? would it really be that simple/
@StevesRC Жыл бұрын
It should 😁
@MegaJohnperry2 жыл бұрын
Hi steve.i purchased a new nx8 a couple months ago. When I first turn on transmitter I get a headset icon on screen with no function on transmitter. When I turn off and back on headset icon is not there and I have function on transmitter. Sits for more than an hour it happens again. Have you ever seen that.do I have a faulty transmitter.
@StevesRC2 жыл бұрын
I have not seen that. Definitely chat with HH on the site to get it sorted. Odd! Sorry to hear.
@MegaJohnperry Жыл бұрын
?
@jamesrobertson40352 жыл бұрын
I don't see the Conscendo Evolution as a pre-load to my NX10, even with the latest update. Is it just so simple that I should just go with the manual?
@StevesRC2 жыл бұрын
Oh yes that model is super simple on setup!
@g.meyers10083 жыл бұрын
When will a NX14 come out. Im a Futaba guy and want more than ten channels. But I do not want android and the super slow IX12.
@StevesRC3 жыл бұрын
While I can't say exactly what is coming out. I would say, Horizon/Spektrum understand this need in the market and is working on solutions.
@craigcundey4605 Жыл бұрын
hi all im looking to upgrade and thinking about the nx10 in the uk and just wanted to know if any knows can you transfere models via link or sd card from a spectrum ix20 to spectrum a nx 10
@StevesRC Жыл бұрын
You certainly can
@seany112443 жыл бұрын
Do these radios have presets for all HobbyZone models? the sport cub s 2 in particular.
@lorinw003 жыл бұрын
Any idea how to connect an NX6 to a DX6 as a wired trainer? The DX6 has the traditional 1/8 inch buddy box cable input jack but the NX6 does not. The NX6 has a data port, USB input, and a 1/8” headphone jack. Does the NX6 need some sort of adapter to 1/8” plug? I wanted to try a wired connection because the wireless connection sometimes dropped out for some reason when the student was in control. Could the dropout have anything to do with the DSMX rate differing on the two transmitters? I think one was 22ms and the other 11ms.
@StevesRC3 жыл бұрын
SPMA3091 is the part you need. It’s always ideal to match frame rate but it’s unlikely that caused drop outs.
@clausgr Жыл бұрын
Claus G,, Steve, I do have a DX9. When I transfer my planes to a NX10 do the voice alerts come across as well? Thanks.
@StevesRC Жыл бұрын
They "should" but you may need to add them back in.
@clausgr Жыл бұрын
@@StevesRC Hi Steve, thanks for your reply. In the mean time I got my new NX10 and yes, voice alerts are coming across but will do a bit fine tuning. All good and happy with the new TX.
@hando54402 жыл бұрын
Hi Mr! Can you teach me step by step to set up reversed at NX10?
@StevesRC2 жыл бұрын
What do you mean? What do you want to reverse?
@kirkharney54053 жыл бұрын
Is the NX series compatible with the Ar9030T? You did not mention this RX in your video but I do currently use them. Also what about the AR9350?
@chowchey3 жыл бұрын
is there a place I can buy a throttle gimbal for my nx8 ?
@firoutfarm3 жыл бұрын
Class 6 SD cards are hard to find. Is sdhc ok? Thank you
@jtepsr3 жыл бұрын
can i upgrade my dx6 radio to the most recent airware firmware by spectrum. i currently do not have airware firmware on the radio.
@johanakerblad3393 жыл бұрын
Could you please show how to get Safe select /AS3X on NX6 and how it operates. I need/want to use it on my Viper.
@CumbersomeDinosaur2 жыл бұрын
You need a compatible receiver. If so, you go to forward programming and set everything up. If you have a BNF model with safe and AS3X, you need to assign the channels via flight modes.
@rigob432 жыл бұрын
Hi! Steve, I have a situation with my NX10 transmitter, I performed a factory reset on the NX10 Radio and it turned on, I turned it off and on again and that's when the TX did not turn on and the problem arose of not being able to turn on, the screen flashes only the logo of Spektrum appears and the Radio does not work for me. Thanks , I appreciate any help . Thank you very much! Greetings!
@StevesRC2 жыл бұрын
Sorry for the late reply. Have you reached out to product support? Might be something they can help you with. I’ve not experienced this issue before
@ottotarnowske9873 жыл бұрын
I have a question. Can my NX8 use a 2s 7.4v battery instead of the little 3.7 volt it comes with?
@StevesRC3 жыл бұрын
Nope it cannot
@lw2163163 жыл бұрын
Can I use the battery from my DX8 in the new NX8 I just bought? If so, do I just plug it in ? - or do you have to modify something to get it to work ? Would that give longer use before having to recharge?
@StevesRC3 жыл бұрын
You can with just by pulling the foam out and plugging in the bigger battery. It would last longer due to the higher capacity.
@lw2163163 жыл бұрын
@@StevesRC Steve - I don't think you understood my question - I did not ask if a higher capacity battery is available for the NX8. I ask if the battery pack from my DX8 would work in the NX8 - I now know the answer is NO. The connector is different, the bay size is smaller. The stock NX8 comes with a small battery that might get you thru one day of flying. I immediately ordered the pack (3 in the pack). The charging connection is also different. Had I known this ahead of time I would not have bought the NX8. I also don't like that the NX8 using the micro size memory card. The DX8 uses the larger size. The micro is too small - too easy to lose. How are you going to copy your DX8 models to the NX8 ?
@aaronstrom163 жыл бұрын
I think the price is outrages man! Ive been waiting on getting a new TX since my DX6e broke a month ago and I see finally today the NX6 is available and they dont even include the magnetic charge plug or a descent battery. This thing better live up to be a good one but they could have just made it a 7 channel..NX7 but no that would cost too much..which is BS!
@StevesRC3 жыл бұрын
The 6 has a 7th channel my friend.
@aaronstrom163 жыл бұрын
@@StevesRC I apologize for the rant..it just makes more sense to me having the 7th channel programmable for other functions in instead of just SAFE..like on the hobby zone carbon cub being that channel 7 is for the flaps on that RX..would that channel be rates 100% -100% for flaps..Im getting the NX6 no matter what and im sure I will like it as much as the DX6e ive only been in the hobby for a year and its been just wonderful but the amount of money Ive spent at Horizon has been worth every dollar. Im not looking forward to rebinding the 20+ plane I have accumulated the last year. I just hope the NX6 will be worth the 300 bucks.
@isaiahfurrow74143 жыл бұрын
Battery should be good for about as much as you'd fly in a single day, or you can later upgrade to the 6000 mAh the MX10 has... that would be like an entire weekend of flying.... I am looking to get the NX8... because I see needing the 7 channels...for warbirds... and maybe one extra channel will makenit a bit future proof.... and because it is only like $40 more...
@BillKisel3 жыл бұрын
@@isaiahfurrow7414 Yeah, for $40.00 more it seems to make sense to get the 8 even if now you think the 6 will suffice.
@ronw23163 жыл бұрын
So do you need a usb wall charging adapter to charge it with the included cable. Or do you charge it by connecting to a PC?
@StevesRC3 жыл бұрын
You can do both!
@ronw23163 жыл бұрын
@@StevesRC Thanks! I'm getting back into the hobby. The last radio I owned is over 20 years old. LOL! Still works though.
@BinderDundat3 жыл бұрын
Hey Steve,Do you know what the class and GB micro sd card requirements are?
@StevesRC3 жыл бұрын
Sorry for the delay. We recommend Class 6 or lower. 32gb or smaller. FAT or FAT32. Some class 10s will work from Sandisk and Toshiba.
@BinderDundat3 жыл бұрын
@@StevesRC Thanks, now I just have wait for transmitters to get into the stores.
@DJBBBOSS3 жыл бұрын
@@StevesRC Here in the UK the standard is Class 10 ....... ul struggle to get class 6 or less now in 2021 ........ this could render the card slot useless within a short time frame
@jtepsr3 жыл бұрын
Can you tell me why I cannot import models from my sd card on the nx6. When I select import model from transfer card menu, it goes to select file menu and all i see are 2 back folders with no models to select. I know the models are on the brand new card.
@dougrymer44903 жыл бұрын
I found that anything larger than a 16gb card won’t work. I am using a 16 and have had no problems.
@EagleSynthetics3 жыл бұрын
I was wondering if the nx radios are compatible to buddy box with the DX radios for flight training
@StevesRC3 жыл бұрын
Absolutely! Via wireless trainer :)
@papasplanes.9562 жыл бұрын
Question. I have had a DX6e for about 2 years after re-entering the hobby. I'm considering upgrading to an NX series TX. Is the NX radio's that much better? Or is it all about the bells and whistles? No issues with the DX6e to date.
@StevesRC2 жыл бұрын
Unless you’re upgrading for channels, I think you’d be fine sticking with the 6e :)
@papasplanes.9562 жыл бұрын
@@StevesRC Thanks for the advice.!
@danlyons2043 жыл бұрын
Hi, do yo know if the AX3X Gyro will automatically work with the model pre-sets you can download for this? I have 2 of them but they are such a fuss to programme I can't even use them. I tried to get my local hobby shop to help but they couldn't work it out either. Thanks
@StevesRC3 жыл бұрын
AS3X programming is done RX side, not TX. So no, you'd have to download those specific model presets or create your own. Hope that helps!!
@iamtedg3 жыл бұрын
Steve. I just purchased an NX 10. Virtually the first thing I read when I opened the instructions was a statement on the battery safety sheet that states that it should only be used between 4c to 49c (40f to 120f). I do some winter flying in temperatures down to about -10c. Does this mean I have to use a different battery pack or a different transmitter for winter flying. What are the risks?
@StevesRC3 жыл бұрын
I flew yesterday for about 20 minutes in 6 degree (F) weather. Risks are low but realize that batteries don't like to be that cold in general. Just like its hard for your car to start on a colder day. You should be perfectly fine, but I wouldn't recommend storing your radio outside and then flying. If you are coming from the car or the house and taking a few flights, you should be just fine :)
@iamtedg3 жыл бұрын
@@StevesRC Thanks Steve. I appreciate the very fast reply. I will try to be careful, and may just use my Dx6 with a standard lithiam pack if I have to be away from the car for longer. Thanks
@michaelmckee63103 жыл бұрын
Problems with NX8. Negative comments removed. Software no good
@mattguidry9803 жыл бұрын
do the nx radios have vibrate motor like the dx9? also is the speaker better? dx8 had crappy speaker, dx9 is much louder and sounds better.
@StevesRC3 жыл бұрын
Yes they have a vibrate like the DX.
@kendonnelly32483 жыл бұрын
I was going to replace my dx9. But i see is eventually going to be discontinued. My question is . How do i transfer my 10 plane memory to the nx10?
@StevesRC3 жыл бұрын
Best way would be to export them to the SD on your DX9 and then bring them over to your NX with an import.
@kendonnelly32483 жыл бұрын
@@StevesRC Kind of a vague answer. So i have to put sd card in pc. Then hunt down where the card is located on my PC on the NX? I suggest a video. Also would there be any issues from the fact that it came from a 9ch to a 10 ch?
@douglasshackett87473 жыл бұрын
Hey Steve, i picked up the NX10 to fly FPV drones, just wondering about latency will it be suitable for racing?
@StevesRC3 жыл бұрын
Plenty of Spektrum pilots out there in the FPV racing world. Low latency for sure!
@kcimages5157 Жыл бұрын
Is it time to retire my dx6i for a NX ?
@StevesRC Жыл бұрын
Especially now that the NX20 just came out? YES!
@kevosrcadventures90193 жыл бұрын
Hi what's up great video I'm just getting in the hobby what transmitter would you suggest I get for a helicopters and planes for around $400??
@StevesRC3 жыл бұрын
Check out the Spektrum NX8
@mikebird97173 жыл бұрын
Forgot to mention I have the NX6
@Fran117843 жыл бұрын
Will the Lipo battery in the DX9 work in the NX10? I have one of the first DX9s and bought the Lipo for it, it last for months without charging. I'll probably replace my DX9 it with a NX10 soon. Cheers
@StevesRC3 жыл бұрын
It will not. Nx is a 1s requirement. Dx had a higher voltage requirement.
@RuudyL2 жыл бұрын
@@StevesRC Another downer of this so called better transmitter
@Mimi-573 жыл бұрын
how do you get the wifi password to save, once I hit back it's gone on the sign in page
@garyhancock60823 жыл бұрын
How do you connect to the wifi I have put. My password in but do not see where you go from there
@peterdickinson76383 жыл бұрын
i am having the same problem, could i pleaase ask for a reply many thanks
@theaerolife3 жыл бұрын
Is this a good radio for a 100cc plane with a 12 channel powersafe Rx?
@StevesRC3 жыл бұрын
If you need no more than 10 channels you should be good! If not, check out the ix12 and IX20.
@johnmueller35733 жыл бұрын
Hi Steve when is the nx 10 coming out ??
@TheMetalSandman3 жыл бұрын
What's the name of the cable you need to connect Crossfire TX to this radios serial port?
@StevesRC3 жыл бұрын
SPMA3090 Crossfire Adapter Cable with Mounting Screws: iX/NX
@douglasshackett87473 жыл бұрын
Hey Sandman! Have you tried your nx radio with crsf yet? I'm finding it impossible to get info on nano diversity tbs.
@freddiesoverbite61623 жыл бұрын
I want the 10. When’s that bad boy coming out?
@StevesRC3 жыл бұрын
Very soon. Should be sometime this month.
@rkelley84752 жыл бұрын
Why are spektrum transmitters so expensive. When other manufacturers have beet you to the table with tech and at a much lower price point
@ultramediafx3 жыл бұрын
RadioMaster TX16S Multi Protocol RC Transmitter
@BillKisel3 жыл бұрын
So, you'd get the RadioMaster over any of the Spektrum NXs? Reason I ask is because I'm new to the hobby (right now flying the HZ Sport Cub S 2 RTF) and will need a radio for the UMX Turbo Timber that I plan to be getting and flying Spring 2021. Thanks.
@ultramediafx3 жыл бұрын
@@BillKisel i would personally, i think its the best deal by far. Very customisable, affordable and supports channel mixing and open tx
@ultramediafx3 жыл бұрын
Ill add that its important to research your specific requirements for your rig. I have found it has even more options at a fraction of the cost ecspecially for new entries.
@oscarmok86433 жыл бұрын
Thank you Steve. Please show the voice comparison between DX9 and NX10. Can it perform custom voice? Is there a tool available which we can use an app to do the configuration and upload to the NX10. The thumb knob is easy to break. (I replaced a few times already on my DX9). Thanks
@StevesRC3 жыл бұрын
I will when I have a close to production version. I'm afraid this version has been through the wringer and the speaker is not final. Early sample life... /shrug...