I am trying to set up a new NX8+ and there are some differences between the older NX8 and the updated NX8+. The manual has a channel input config screen from the NX8. It shows 5 Aux channels. The actually screen on the NX8+ has no Aux channels. The KZfaq videos for the nx8 all direct that the SAFE select switch be programmed to Aux2. I can't get the switching set up on the NX8+ for switchable between beginner, intermediate, and advanced. When I bind the new transmitter it only comes up in beginner mode.

Nice camera work. What camera and lenses were used.

I have the nx6. Does this mean I can now buy 8 and 10 channel receivers and bind them?

I had the twist 60 with a os 91 fx That is the best engine for it . I flew it until the engine wore out. They cost 200.00 back then but are now 280.00 They takeoff and land easy, easy to transport .

How do you use spektrumnx 8 + 20 channels ?

Are the drive wheels hydraulic too?

Add Bluetooth for headphones please.

Hi. After updating the NX8 and the original receiver in the E-Flite Turbo Timber Evolution 1.5, BNF version, why does AS3X and SAFE not work when I re-use it from the BNF model database in the radio? I haven't flown the plane since the update because I don't have time to spend hours setting it up by trial and error. It seems that the database of preset models in the radio is not compatible with the new version.

Damm guys, there is the GPS signal reciver for autonome flight, also in transmitter for return home.. so slow design.

If you would like to do a real service to your customers, write a manual that the average person can use. As usual, the manual for the Spektrum transmitters tells one where to find the action request needed, but does not tell the steps on how to accomplish the requested task. Not everyone is a computer tech.

So can i use my NX8 in the new Bronco that needs a 12 channel radio?

Will the original DX18 (non G2/3?) series Tx updated to FW 2.11, be able to take advantage of the features of newer AS3X+ Rxs, or the older SRXL2 Rxs, updated to AS3X+?

Can you put brakes on them and then try to replicate the helipad landing?

Where is the NX20SE with the nice aluminum gimbals??

Is there any way to reduce the number of channels on the monitor screen on the NX8 after the update. The existing models in my transmitter monitor just 8 but if you create a new model it monitors 12

will there soon come an NX10+, I really would love to have 2 sliders on the back side.

Well I bought the Draco a few weeks ago for my birthday and after assembling it I decided to purchase the Spektrum 8+, which I did this morning before viewing this video. Will this radio have the updates already installed?

To me spectrum nx 10 is way better not only quality also simple not as complicated as radiomaster tx16s. Simplicity is a key. In which case even after learning how to use tx16s i still using my nx 10 .spectrum is best of the best 585$ it steal. Plus if u want all the options on tx16s it will run 600 $ for that i get spectrum nx 10 . It homicidal radio not for everyone 😅😅😅

Why are there electronics in spectrum tx batteries?

Any word on the info on how to add custom sounds to the NX7e after the update?

Nx10 better get the 20-channel support update too.

Nice t-shirt!

Hey Steve, thanks again…Do you mean if I update my NX7e right now, it has custom sounds enabled, or that feature is still to come later? If it does have them right away after the update, how do I activate them?

Thanks for the helpful video. Will Spektrum release any receivers above 10 channels? OTher than the very expensive and big powersafe receivers, there arent many options to make use of the additional channels. You also cant daisy chain two smaller receivers together currently for more channels...

What does it mean when the radio says holds one?

My CE just arrived, looking at the electric motor box it looks different from the instruction manual with the old power 90...in the video you said you used the new Spektrum motor mount system..is there a link to find this ??

אחלתה לי את הראש

Hi from Australia! Thanks for all your work with this video:) I know the NX7e doesn’t have voice, but with this new update, will it get custom sounds? The promo material made it seem like it would?

This is great I WONDER IF I COULD GET 4HIS IN MY GEN1 DX8 FOR MY V900.

Are those RC cars that drank red bull?

Can fit a small child in there 🤔

This is so dang cool

Hey Steve, Thanks for the awesome vids. Question for ya. I have the h9 Fokker d7. Bought it after seeing you seff video with model av8r. Loved the build so far. Just curious what you'd recommend for painting the ultracote and how to maintain it after painting. I plan to use rustoleum spray cans. Big question is how do you remove sags in the ultracote during the winter on a painted surface?? Any tips tricks are highly appreciated. Thank you for all you bring to the hobby, Edwin

Will the older dx controllers work with thr axs3+ receivers, or should it be kept as is

Given the track history of the iX12, it’s a shame that Spektrum didn’t make good on that by including the iX12 in the software upgrade. Anyways, have acquired 4 Spektrum transmitters over the years, iX12 was the last, after that experience no more Spektrum for me.

@stevesRC so if i update my nx6 to the latest firmware without updating the receivers will they still work as they were befor? I have mostly umx BNF planes and a apprentice s2 with a 631 receiver

Now people can buy NX8 20 Ch or NX8+ 20 Ch instead of Radiomaster. I have already older NX10 because I wanted 9 channels. Now after this update I would buy NX8+. NX10 is too expensive like local Jeti DS-12 here in the Czech Republic.

Lol. They are doing this because everyone is dropping spektrum for frysky and radiomaster that offer this out of box

Spectrum is a premium product. My problem with them is that I like to fly all kinds of stuff and I prefer my Radiomaster Zoro. Mine is with the built in 4in1 module with an external Express LRS module. There is very little I can’t bind to, including Spektrum, for less than $300. I wish Spektrum would build a radio with an internal Spektrum transmitter and an external module bay for 4in1 Modules or Express LRS Modules that didn’t break the bank. No question that Spektrum and Horizon Hobby produce incredible products with bind and fly options and my continues to grow with more than a dozen AS3X models. Can not wait to fork over $200 foe the new ME262. Would just like to see them take a stab at a truly “universal” radio. Oh and get us a AS3X P38 Lightning next. Would love to see one built around the twin otter power system/battery.

Pretty cool I have the NX7 getting 7 more channels

Do you work for Spektrum?

Your NX8 is now a 20 channel radio. No your NX8 always was a 20 channel radio, it's just the old firmware didn't allow you to use the other 12 channels. I guess all the love the Radiomaster TX16S is getting has spurred Spektrum on to give this amazing free gift to it's customers? Personally I have both the TX16 and NX8, as I fly helis I never use anything above 6CH but I guess it's nice to have the extras for future models.

Hmm the crowdstrike debacle happens the same day as the mega Spektrum firmware update, coincidence? I think not 🤔Actually I think the crowdstrike thing was the day after, but still.

Hi Steve. Do I need to update my IX14 in order to use my AS3X+ receivers? Thanks

Thank you for this video. I have the Nx6..did the update and still show 6 channels in the monitor? Any help would be great.

So If I understand these new channels are not fully proportional and independent. They must be tied to a current stick or switch. And chance with this update can you use two seperate receivers at same time.

Do, nothing for the DX8

I have the NX8 currently and this is awesome news. A huge update for us. Keep up the great work. I'm one happy camper!!

cant get the updated programming app downloaded. i have version 8.0

must be nice to have horizon pay for 14 hundred dollar servos for your airframe. all these updates are cool and all but a way for you to make quality parts cheaper so more of us can afford to have nice things would be more appreciated than the ability to drive 2 grand in servos with a radio.