How to install 3rd function Kioti CK (PART 1)

Рет қаралды 22,584

2 жыл бұрын

Step by step installation of 3rd function kit on Kioti CK2610, 3510, 4010. There are two parts to this installation. The videos arent very exciting to watch but they will give you way more guidance than the instructions. It may be the difference of doing it yourself or having the dealer do it. Kit cost $1000 and took about 6 hours to install while filming. Thanks for watching!
Link for Part 2. • How to install 3rd fun...
Kioti dealer part number for 3rd function kit. WCKA162 (3rd function kit KL4030)

Пікірлер: 32

@cutweldngrind Жыл бұрын

I haven't pressed buy it now on the Langmuir Pro Table but I did press buy it now on the CK2610 open cab. I also want to add valve and get a grapple later. Cool video.

@SpicerDesignsLLC Жыл бұрын

Nice! Glad you enjoyed the video. Theres going to be a lot more kioti videos coming soon. Were in the middle of some big changes for the channel

@johnskinner939 2 жыл бұрын

In spite of all the negative things you found I’m glad you didn’t give and not post this it’s very informative. I’m installing my third function on my ck3510 in the morning. I really enjoyed your commentary on this it was quite entertaining. I’m sure by your tone of voice you were somewhat frustrated but your calm demeanor made this video the one I’m using as my how to. Thank you for putting this on KZfaq.

@SpicerDesignsLLC 2 жыл бұрын

I appreciate that. I really wanted to make a video to help get through those awful instructions. And yes it was very frustrating. Good luck with your install. Thanks for the comment!

@2020Tundra 2 жыл бұрын

I just subscribed to your channel after watching the latest video on Hometown Acres channel (Adam). You made him a super nice metal logo for his channel and he encouraged his viewers to check out your channel… so here I am 😅 I started with your oldest video and I plan to catch up to your most current video at some point. I live in South Carolina, just for reference.

@SpicerDesignsLLC 2 жыл бұрын

Thanks for checking out the channel! Its a learning curve but im getting better. Id love to hear some feedback and always open for suggestions. Hope you enjoy the videos.

@2020Tundra 2 жыл бұрын

@@SpicerDesignsLLC I started at your first video and watched each video from oldest to newer… I’ve got 2 more to go to be caught up. Lovin your channel 👍

@raymondroberts1905 2 жыл бұрын

Doing this on my ck3510 this weekend (weather permitting). This series will be used as reference

@SpicerDesignsLLC 2 жыл бұрын

I hope it helps you out and saves you sometime. Good luck with the install

@802louis 2 жыл бұрын

I have a kioti that I want to put a third function on thanks for sharing

@SpicerDesignsLLC 2 жыл бұрын

Hope it helps you on the install. Thanks for watching

@MrCPPG Жыл бұрын

You convinced me to order it with the tractor.

@joechristensen1177 2 ай бұрын

You did a excellent job explaining g everything you did pal

@SpicerDesignsLLC 2 ай бұрын

Thank you! Hope it was helpful

@802louis 2 жыл бұрын

Thanks for sharing I have a kioti nx4510 and I want to put a third function on

@SpicerDesignsLLC 2 жыл бұрын

thanks for watching, I hope the video helps you out with the install

@HisWayHomestead Жыл бұрын

You did a great job with this video. very informative! thanks for sharing! New subscriber!

@SpicerDesignsLLC Жыл бұрын

Thank you! Hopefully its helped some people work through the awful instructions. Thanks for the comment!

@jakeMTSU Жыл бұрын

Trying to figure out how to install a LS3 (land shark) to my CK3510HST ... I have the CKA162 and CKA111 ... some issues are finding/making a return line to tank, and then figuring out the on/off switch .. the "Cflow" kit they say is not made for Kioti factory kit... any info you can share would be great

@SpicerDesignsLLC Жыл бұрын

Jake, sorry im not familiar with that setup. You might have to reach out to Kioti on that one or check some forums. Sorry i couldnt help with this.

@Lu-tu4gn 2 жыл бұрын

Great video. Do you have part number for kit or dealer you purchased from? Tnx.

@SpicerDesignsLLC 2 жыл бұрын

Thanks you. Heres the number I found on the receipt. Kioti dealer part number for 3rd function kit. WCKA162 (3rd function kit KL4030)

@robinnorman1170 2 жыл бұрын

So do you lose ground clearance with that valve box installed?

@SpicerDesignsLLC 2 жыл бұрын

no you don't lose any clearance. Its the equivalent to the step on the other side. there's is also some linkage underneath at the same height. Thanks for the comments.

@k.compton8995 2 жыл бұрын

Do you have a link for the kit? Thanks

@SpicerDesignsLLC 2 жыл бұрын

Sorry i dont have a link for the kit. I purchased it from the Kioti dealer. Not sure about now, but it was a stock item when i bought it.

@usmarshall336 2 жыл бұрын

Q: was this 3rd function valve W.R. Long or a Kioti ?

@SpicerDesignsLLC 2 жыл бұрын

I don’t understand the question

@usmarshall336 2 жыл бұрын

@@SpicerDesignsLLC which third function valve manufacture did he use? Kioti manufactures their own third function valve. WR long manufactures third function valve from multiple different tractor manufacturers. I was asking to see which one he actually went with on his tractor.

@SpicerDesignsLLC 2 жыл бұрын

Got it. I picked up the valve kit from the kioti dealer. Im assuming its Kioti. I left a part number in the description if that helps. Im assuming your talking about me when you say he right. Sorry for the confusion.