No video
Spinner Rings Made Using FRETZ Spinner Ring Maker
Рет қаралды 14,967
Күн бұрын
@GomeowCreations 3 жыл бұрын
I will show you step by step how to make these beautiful mixed metal rings and how to get this awesome finish. Big thanks to Ridge for sending me this wallet and supporting the channel! Here’s the site if you want to check them out. bit.ly/RidgeWallet-GomeowCreations Use Code “GOMEOW” for 10% off your order! 😁👍 FRETZ Spinner Ring Maker - bit.ly/SpinnerRingMakerFRETZ FRETZ Stamping Hammer - bit.ly/FRETZ-StampingHammer FRETZ Starter Hammer Set - bit.ly/FRETZ-StarterHammerSet 2lb Brass-Head Mallet- bit.ly/2lbBrassMallet Steel Mandrel Gold Standard - bit.ly/GoldRingMandrel Finger Ring Sizer Gold Standard - bit.ly/RingFingerSizer Ring Stretcher - bit.ly/RingStretcher Haymaker Saw Frame - bit.ly/HaymakerSawFrame NANO Jeweler's Saw Blades - bit.ly/NANOSawBlades Polishing Master Kit - bit.ly/PolishingMasterKit Foredom k.2230 - bit.ly/K2230 Basic Smith Little Torch Five Tips - bit.ly/SmithLittleTorch5tips Premium Bench Block 6" x 6" - bit.ly/PremiumBenchBlock Copper Sheet (Various Sizes) - bit.ly/CopperSheets 16 Ga Solid Brass Wire - amzn.to/38gE7r2 Tripod Soldering - amzn.to/3exo4pK Bench Pin and Anvil - amzn.to/2U2nsiM Heavy Gauge Mesh Screen - amzn.to/3la9xD1 Hard Charcoal Block - amzn.to/3l8nIID Handy Flux - amzn.to/3l73X4m Third Hand Plier/Tweezers - amzn.to/36gea8x If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date: GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes *If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel* ---------------------------------------------------------------------------------------------------------- If you would like to directly support the channel you can do so in a few different ways. If you would like to directly support the channel you can do so in a few different ways. 1. Like, comment and share my videos 2. You can make a one time donation via Paypal of any amount www.paypal.me/gomeowcreations 3. You can sign up a monthly donation via my patreon for as little as $1 per month www.patreon.com/GomeowCreations 4. You can sign up a monthly donation via my Subscribestar for as little as $1 per month www.subscribestar.com/gomeowcreations 5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making. #spinnerring #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
@user-iv2xo3dn5o 3 жыл бұрын
فيديو رائع قناتك مذهلة وجيدة جدا أنت فنان مبدع سلمت يداك
@dawnsaffel2620 2 жыл бұрын
Thanks again !!
@GomeowCreations 2 жыл бұрын
😁👍
@dtbuck1475 3 жыл бұрын
I've wondered how those rings were made. Thanks for posting a video about it.
@GomeowCreations 3 жыл бұрын
No problem 😊
@sylviaprudhomme5417 3 жыл бұрын
Really liked the color. And directions easy to follow. You do excellent job of instruction
@GomeowCreations 3 жыл бұрын
Thanks 😁
@jonahhill5942 3 жыл бұрын
Awesome instructional video, as always!
@ssr4656 3 жыл бұрын
Pretty cool Demo, Thanks!🏹
@GomeowCreations 3 жыл бұрын
Glad you liked it!
@NoyesDesignsjewelry 3 жыл бұрын
nicely done. I havn't made a spinner ring is years. Maybe its time to make a new one. Thank you for the inspiration.
@GomeowCreations 3 жыл бұрын
Let me know if you do. I know these are very simple ones and I'm sure you can make them much better haha
@NoyesDesignsjewelry 3 жыл бұрын
@@GomeowCreations ah thanks man. I will. Simple sometimes is best.
@icatz 3 жыл бұрын
Very nice and yay copper. Do you have suggestions for sealing the interior? I've ended up using clear nail polish cuz it's cheap and the owner can easily recoat it. TFS 💖
@hippiehikerr2180 Жыл бұрын
If you were to do them in silver you wouldn’t get the same look right? Can you only patina copper?
@GomeowCreations Жыл бұрын
You can add a patina to silver as well it just turns to black or rainbow.
@TheMayflowerPilgrem 3 жыл бұрын
That greening on your finger is a chemical reaction, its a pretty cool read.
@palmbae77 3 жыл бұрын
Yo you're awesome :) have a nice day
@GomeowCreations 3 жыл бұрын
Thanks 😁
@mariopineda3741 3 жыл бұрын
You hammer first then solder... what aout soldering first and then hammer?
@GomeowCreations 3 жыл бұрын
Yeah you can really do it any way you like. I like to hammer first because hammering does change the shape and size of the ring. I don't want to deal with it becoming the wrong size so I just do all the work before hand.
@mariopineda3741 3 жыл бұрын
@@GomeowCreations awesome - thanks. using your video right now as a tutorial for my first spinner ring. Loving it! :-) Keep up your awesome work.
@GomeowCreations 3 жыл бұрын
Thanks and let me know how it turns out
@jeffhulett4194 3 жыл бұрын
I like the color of copper, but how do you seal it?
@GomeowCreations 3 жыл бұрын
A metal lacquer aka a clear coating or you can plate it in rose gold. 😅👍
@mercuryrising9174 3 жыл бұрын
If you wear a copper item long enough your body will get used to the release of the copper oils and start to absorb it and that's when the healing begins thank you..
@mercuryrising9174 3 жыл бұрын
@@GomeowCreations you sell these right ? I really love them
@mariopineda3741 3 жыл бұрын
Should you anneal the ring before you flare the ring or is it ok if it is work hardened?
@GomeowCreations 3 жыл бұрын
If you can anneal it it would make it easier and it will lower the risk of cracks in the metal.
@mariopineda3741 3 жыл бұрын
@@GomeowCreations If one would anneal the ring before flaring it, then the finished ring would be "soft". Would that be a problem?
@GomeowCreations 3 жыл бұрын
Flaring it will work harden it but you can also throw it into a tumbler to harden it.
@JayDub_143 3 жыл бұрын
Those came out gorgeous!!! How would you recommend sealing the copper?
@GomeowCreations 3 жыл бұрын
You can use clear metal lacquer or you can rose gold plate it 😅👍
@JayDub_143 3 жыл бұрын
@@GomeowCreations thank you!!! I love that plating system, not in my current budget but someday😀 I am saving for an economy size rolling mill atm. Thanks for sharing all these tutorials I really love the roughness of these rings!! ❤
@jacquiefarnsworth3956 3 жыл бұрын
Great video as usual! Would the matte black stay matte using a matte lacquer? I really liked the matte look. Also, brass won’t oxidize with liver of sulphur?
@GomeowCreations 3 жыл бұрын
The brass does a little in the LOS but not much. I woul think if you used a matte coating it would keep the black matte longer but idk to be honest.
@jacquiefarnsworth3956 3 жыл бұрын
@@GomeowCreations thanks! I will try and let you know! :). I have a client wanting patina on silver, (matte)...
@connielorig1462 3 жыл бұрын
What's the second hole on the Spinner Ring Maker for?
@flyingcheff 3 жыл бұрын
Didn't Jeff Fulkerson invent that first? Maybe he had Fretz do it. It's cool. Oh, dearest, you need a shear, that filing everything straight in the vise - ack!
@GomeowCreations 3 жыл бұрын
I have no idea 😅
@GomeowCreations 3 жыл бұрын
What do you mean, I have a shear and used it in the video haha
@flyingcheff 3 жыл бұрын
@@GomeowCreations Oh, sorry. I just thought it's a lot of work to even up the end of the ring with the vise when you could use a shear, but then you'd need a guillotine shear with the brace to make sure trimming the end of the ring was a perfect 90 degrees. That's all. Just finding ease for us all. You are good at what you do, and quite the pro! Love your videos. I subscribe, always try to comment (that helps right?), and use your links. I saw a tool very similar in a LJJA magazine article/tutorial that Jeff Fulkerson invented - at least it said he did. I think maybe he had it made and promoted by Bill Fretz. Who knows these days, so many great tools coming out! I've got three myself coming out with Eurtool shortly, and already wanted by Rio so I've heard! I'm excited.
@mickowen568 3 жыл бұрын
y not just buy copper piping different sizes
@GomeowCreations 3 жыл бұрын
Because that is not the point of the video for one. It's to show how to make them so you can do this with whatever metal you like. Also from what I know of you can't really get pipe in the right sizes to make rings. If you have a ring stretcher you can make that work it hammer them a lot. 😅
@mickowen568 3 жыл бұрын
@@GomeowCreations then u anneal the pipe .i put a comment of your moulding also and the last rings u just made
@GomeowCreations 3 жыл бұрын
Yeah I have seen you comments, the one on the casting video is hard to read and understand and you other is about making a ring without soldering and just a saw.
@mickowen568 3 жыл бұрын
@@GomeowCreations did you get my reply
@robertbowser815 3 жыл бұрын
Too many ads and one of them's like 4 minutes long I mean it was something I wanted to know how to do but I'm not watching them any ads
@GomeowCreations 3 жыл бұрын
Sadly I have no control over the ads that play in my videos. I also don't like how KZfaq now has back to back ads but I think anything over 15sec can be skipped so you wouldn't have to watch a full 4 min ad. 😊👍
@bobbieradenslaben3189 2 жыл бұрын
davs get a hair cut
Кушать Хочу
Рет қаралды 7 МЛН
Andrew Berry
Рет қаралды 242 М.
Zebrano Wood Craft
Рет қаралды 12 М.
Eugenio Monesma - Documentales
Рет қаралды 3,5 МЛН