How To Make A Spinner Ring Using Durston's Spinner Ring Flarer Tool

Рет қаралды 33,472

3 жыл бұрын

#andrewberry #spinnerring #durstontools
In this film Andrew Berry shows you how easy it is to make a flared edge ring that can be used to make a spinner ring using the NEW Durston Tools Spinner Ring Flarer Tool.
The tool enables you to flare both edges of the ring evenly both at the same time. So much easier than other tools out there on the market.
To buy yours, click the affiliate link below.
durston.com/product/spinning-...
/ atthebenchuk
/ at_the_bench_uk
/ andrew_berry
THE EQUIPMENT I USE TO VLOG AND FILM
Epidemic Sounds www.epidemicsound.com/referra...
Canon 80D, Body; amzn.to/2Lfkdk7
Canon Lens 10-18mm; tinyurl.com/gncnrwz
Tripod for Canon; tinyurl.com/hdhuz6z
Memory Cards; tinyurl.com/z8mhuk4
Card Reader; tinyurl.com/z97tccx
Microphone, Cheap; tinyurl.com/hbxtthg
Microphone; tinyurl.com/zpjpoeq
Canon G7X Camera; tinyurl.com/jkvu4b4
Tripod for G7X; tinyurl.com/z27m9aj
Mini Tripod; tinyurl.com/he93omu
Mavic Drone; tinyurl.com/jfh9da4
360 Camera; tinyurl.com/jbmrugq

Пікірлер: 71

@jeannettesalazar6442 8 ай бұрын

Andrew you are the best lecturer, I ❤ your work and your transparency. The other videos with Louise are to confuse for me because they made questions that I don’t understand what they’re talking about. I am learning from you at the bench tutorials. I am addicted to your videos. Thanks ❤😊😊😊😊

@wendyannh 3 жыл бұрын

Clever little device, clearly intended for tool junkies, LOL! Actually, though, as an apartment-dweller, this would really help me and *allow* me to actually make these rings, because the less hammering of any sort I have to do, the better. Don’t want to piss off the neighbors, or the landlord, with that noise! Another nice video, Andrew, thanks. I like your new back wall, too.

@beaddemon2572 3 жыл бұрын

Can't wait to try mine. Would it be possible for you to do a video sometime about soldering a textured ring and how to handle the cleanup of the joint? Maybe give us some tips in how to avoid major cleanups on the joint of a textured ring? This is still an area of growth for me. 😂

@sdtuber1099 3 жыл бұрын

Thank you Andrew. An ingenious tool & helpful demonstration. Glad you are resolving the number of ads.

@moorejl57 3 жыл бұрын

This looks like a nice way to make a crushed stone inlay ring as well. The inside of the ring is basically a comfort fit and the outside concave area can be filled with inlay and CA glue.

@dawnsaffel2620 2 жыл бұрын

I can't wait to try this style ..your videos are so good and informative. Thank you ! I'm going to look at getting one of those flare tools.

@evgenishenker752 2 жыл бұрын

Thank you a lot, very detailed and understandable.

@msackettcna78 2 жыл бұрын

Thank you! Great vlog!

@gilliansprott5487 3 жыл бұрын

Great to see how easy it is to use.

@Orandu 3 жыл бұрын

I’ve been using a plumbing flare for years. This looks so much easier!

@elisazulueta9535 Жыл бұрын

Thanks great video, ingenious tools to make spinner rings ❤as always your the best teacher ❤

@lorraine8368 3 жыл бұрын

Great video... as usual!👍

@debbiedenyer3797 Жыл бұрын

Your teaching makes sense

@mary-annkieckhaben5026 2 жыл бұрын

Thank you for shering look good.

@VMHenning 3 жыл бұрын

Thanks for demonstration! Just ordered this from Durston (with your code) and l’m looking forward to make some curved rings with different textures.

@deputydog1995 3 жыл бұрын

I like your sparkly spinner spanner.

@wendyannh 3 жыл бұрын

😆

@ozelgriffin 3 жыл бұрын

Super happy about this tool! I would like to know where can I get the chart for the ring sizing?

@wormemc 3 жыл бұрын

Just got my flaring tool but I'm getting an uneven flare on my rings

@mmukherjini2161 Жыл бұрын

Thank you…I did get the flatter but haven’t tried it yet…you make it look so simple..it’s always the soldering which scares me 😱

@mmukherjini2161 Жыл бұрын

Flarer

@George-ew3gx 3 жыл бұрын

That is a neat tool. You have great videos ,thank you. I know this is off the subject of spinner rings but how would you temper a silver tie bar 5mm wide 18ga? Thanks in advance. George

@oreolovesyou95 Жыл бұрын

Awesome video! Do you hav any tips/can you make a video on how to clean a seam of a textured ring? i never seem to get it right and always sand off the texture :/

@dawnsaffel2620 Жыл бұрын

Hello Andrew I bought the Durston spinner tool. But I am not getting an even flare. One side will flare and not the other. Can you tell me what I'm doing wrong.

@zuma3334 6 ай бұрын

Hello were you able to figure out why it didn’t flare evenly? I noticed he did not text you and others back

@dawnsaffel2620 6 ай бұрын

Hello @zuma3334 no I actually have not used it since. But I have some people who want me to teach them. So I guess I will be trying it again.

@teanpascoe8481 3 жыл бұрын

Hello :) Where did you get your ring size table from? Thank you, Tean

@althealawrence9240 3 жыл бұрын

Great video as per usual Andrew :-) Is there a separate video on how to make the actual rings used as spinners?

@Atthebench 3 жыл бұрын

No but I can do one if you like?

@althealawrence9240 3 жыл бұрын

@@Atthebench Yes please👌🏽

@stephenjohnson1221 3 жыл бұрын

you can all so use it for flesh tunnel earrings.

@JoeyisDREADful 3 жыл бұрын

Good point.

@teresas.3979 3 жыл бұрын

Now I have a bad case of the I wants it.

@vodazone8 3 жыл бұрын

Yes Andrew, i would also like to know where did you get the ring size table from?, cheers Kevin.

@Atthebench 3 жыл бұрын

Go to atthebench.com join as a freeview member and then you can click on the Resources tab at the top and download it

@vodazone8 3 жыл бұрын

@@Atthebench Thank you Andrew, keep up the good work, love the videos you do.

@christieread9506 3 жыл бұрын

Andrew I got one of these from your 12 hour marathon ( brilliant day) but it doesn’t flare evenly for me, any ideas where I’m going wrong?

@zuma3334 6 ай бұрын

Hello, Were you able to find out why it didn’t flare evenly? I noticed he did not text you back. Thank you

@SilvernStone 3 жыл бұрын

Any chance of getting the discount offered on the marathon? I couldn't order then due to the overwhelming response and the computer crashing and have been too busy to think about ordering it since then.

@Atthebench 3 жыл бұрын

The offer ended on Monday I’m afraid.

@bethcramer3420 3 жыл бұрын

How do you get the spinners on the ring?

@Nrscathy60 Жыл бұрын

I've seen many solder videos, but what is the grit of your emery paper and what is your buffing stick, leather??

@Atthebench Жыл бұрын

I only use 600 grit and I use it wrapped around the wooden stick

@SilvernStone 3 жыл бұрын

Would this tool work to make a coin ring?

@tahomyjo 2 жыл бұрын

I wasn’t clear on what gauge silver you used for the band? You said not point eight? I don’t understand? Is it 0.8 ?

@tahomyjo 2 жыл бұрын

I figured it out it’s 20 gauge

@dhduncan Жыл бұрын

Can I use a butane torch for hard solder?

@Atthebench Жыл бұрын

yes of coarse you can. Its what i use for making the initial ring with.

@dhduncan Жыл бұрын

Thank you! I don’t have any of the gas torches like mixed gas ones so this is a big help

@a1jaspertint461 2 жыл бұрын

Do you make these to sell ?

@Atthebench 2 жыл бұрын

DURSTON.com sells them

@peterrschuck 3 ай бұрын

Nice idea, but shipping is way too high to purchase. Given no options other than high price, which is a similar price to the device. Was going to order one but cancelled it once I saw the shipping price. Will look in the hardware store for something similar in the plumbing section. Sorry, Andrew, but we purchasers should be allowed to select cheaper shipping options, not high priced cone only DHL Expedited. I don't mind it taking some time to arrive here in Australia.

@Atthebench 3 ай бұрын

Sorry Peter. But with so many parcels going missing we have to have a method of tracking and claiming our money back

@peterrschuck 3 ай бұрын

@Atthebench no problem I totally understand. Just a little disappointing to go through and find such high pricing for shipping. It's not the first time I've had to cancel a prospective purchase.

@LightKatchurs 3 жыл бұрын

so you made this flair do-hicky??? I thinks that's what I read! Call Rio Grand here in America! I wanna get it! and support your brain!

@katherinesolo3939 3 жыл бұрын

so so many ads,is that normal?

@Atthebench 3 жыл бұрын

Thats KZfaq doing that, not us. Will sort it out

@katherinesolo3939 3 жыл бұрын

Still love your channel, keeps us all sane during lockdown.

@ausrabernote5914 2 жыл бұрын

@dawndeluca 3 жыл бұрын

Should have been titled How To Make a Flared Ring. Would have been better to see it flare with the spinners on. Disappointing.

@Atthebench 3 жыл бұрын

Sorry that you find the film disappointing. I did show you a couple of the spinner rings and clearly demonstrated how to make the ring if I had added them. I felt it better to show the flaring action and the movement of the metal using the tool. If the spinner rings were in place you wouldn’t have seen the flaring very easily.