Spitfire Mk.VIII. Full Build

Spitfire Mk.VIII. Full Build - Eduard 1/48

Рет қаралды 15,298

2 жыл бұрын

Hi modellers,
In this video, you can watch how I built this 1/48 Eduard Spitfire Mk.VIII.
There is a dedicated video for the cockpit.
Please check the link below.
• Spitfire Mk.VIII Cockp...
I used the UK Aircraft Explored KZfaq channel as a reference. If you are working on a Spitfire or just interested in this beautiful aircraft this channel is highly recommended.
Please check the link below.
/ @ukaircraftexplored6556
This is not a sponsored video. The kit, paints, materials and everything I use paid from my own money.
Music from KZfaq Audio Library
Thanks for watching!
All the best!
CSL

Пікірлер: 66

@seanyoung8085 7 ай бұрын

Absolutely incredible!! Inspirational

@cslvisualstudio 7 ай бұрын

Thank you ☺️

@Christospap 2 жыл бұрын

Beautiful Spit!

@cslvisualstudio 2 жыл бұрын

Thanks 😊

@crisovejanegra3517 2 жыл бұрын

What an absolute masterpiece!!! Bravo, love it

@cslvisualstudio 2 жыл бұрын

Thank you 😊

@septiccalling8341 2 жыл бұрын

Now, that is a thing of great beauty!

@cslvisualstudio 2 жыл бұрын

She is beautiful, for sure.

@normansmith8184 2 жыл бұрын

Stunning simply stunning, nothing more you can say.

@cslvisualstudio 2 жыл бұрын

Thank you so much.

@erikafarkas1182 Жыл бұрын

Awesome job!

@cslvisualstudio Жыл бұрын

Thank you so much ☺️

@wbpsmodels3452 2 жыл бұрын

Exceptional work. Congrats!

@cslvisualstudio 2 жыл бұрын

Thanks 😊

@josecesar1639 2 жыл бұрын

Gorgeous work!

@cslvisualstudio 2 жыл бұрын

Thank you 😊

@jonathanr2830 2 жыл бұрын

Fantastic work! Certainly shows in the final reveal. Incredibly beautiful model of one of my all-time favorite planes. Congratulations!

@cslvisualstudio 2 жыл бұрын

Thank you

@midnightmodeling1639 Жыл бұрын

Great build. Your detailing is amazing.

@cslvisualstudio Жыл бұрын

Thank you 😊

@marekkoutny368 2 жыл бұрын

Excelent job!

@cslvisualstudio 2 жыл бұрын

Thank you 😊

@markbaigent8373 2 жыл бұрын

Beautiful job

@cslvisualstudio 2 жыл бұрын

Thank you

@hawk20078 Жыл бұрын

Love the work this kit is on my wish list, I got to see this spit in the flesh in 2008 at Temora Australia.

@cslvisualstudio Жыл бұрын

She is a beauty... I saw this plane a few times, never enough.

@CarstenRKjaer 2 жыл бұрын

Very informative video, and a great result👍

@cslvisualstudio 2 жыл бұрын

Thank you 😊

@ianjackson7515 2 жыл бұрын

First video of your that I've seen - excellent work and finesse in the finishing. Going to check some more now.... Best from New Zealand.

@cslvisualstudio 2 жыл бұрын

Thank you. I'm glad that you liked the Spitfire. Interesting aeroplanes are coming as aBf109, a Tempest or a P-47.

@roiszczepanski402 2 жыл бұрын

Very nice! I made the same kit but the wash reacted with the varnish and messed everything up. You on the other hand did this plane justice. It looks just like the real thing

@cslvisualstudio 2 жыл бұрын

Thank you 😊

@johnmclean6498 2 жыл бұрын

Great build - meticulously done. Cockpit was extra good and the framing set it off nicely. I, too, think weathering and chipping can be overdone. Subtlety here! I do like lots of white petrol oxide aft of the exhausts, which built up on "busy" aircraft.

@cslvisualstudio 2 жыл бұрын

Thank You :-)

@ianthomson9363 2 жыл бұрын

A very nice build and nice subtle weathering. I must try an Eduard kit- I recently built the Tamiya Mk1 Spitfire (I built it as the recently restored N3200, which I had the opportunity of sitting in) and thought it was the best engineered kit I've ever done, so it would be interesting to compare the two.

@cslvisualstudio 2 жыл бұрын

Thx for your kind words. This was the best kit I've ever built. No problems at all. Is the N3200 the MK.I in Doxford?

@ianthomson9363 2 жыл бұрын

@@cslvisualstudio Yes it is. I have Guy Martin's DVD of the reconstruction of N3200, but it doesn't show how much of the original aircraft was used.

@cslvisualstudio 2 жыл бұрын

That is a beautiful piece of aviation history.

@oceanvibesphotography8395 2 жыл бұрын

That is a awesome looking spitfire I’ve done the 1/72 scale kit from eduard with the same scheme

@cslvisualstudio 2 жыл бұрын

this is a unique one, no doubt

@oceanvibesphotography8395 2 жыл бұрын

@@cslvisualstudio I’ve seen that spitfire as well

@cslvisualstudio 2 жыл бұрын

Where did you see her?

@oceanvibesphotography8395 2 жыл бұрын

@@cslvisualstudio the museum at temora nsw and again at the Avalon air show

@roiszczepanski402 2 жыл бұрын

@@oceanvibesphotography8395 Yoo nice. I've also seen that spifire at the tyabb air show

@norbertkrizsan1430 3 ай бұрын

Szia.Nagyon szép lett.🙂Pont ezt a makettet kezdtem el a napokban,csak a Profipack verziót.A kabinhoz kaptam a videódból néhány tippet.🙂

@cslvisualstudio 3 ай бұрын

Szia, Örülök hogy tetszett, annak meg különösen örülök, hogy tudtál ötleteket meríteni a videókból. Hamarosan jön a Sopwith Camel befejező része. Köszi a kommentet 😊

@ivanwomack 2 жыл бұрын

Nice build. Thanks for sharing! Just one note, your tabs on your flight controls are deflected in the wrong direction. A tab goes in the opposite direction to that of the surface it is on.

@johnmclean6498 2 жыл бұрын

The trim tab can be set anywhere from the cockpit - in this case a few degrees nose up. The elevators naturally "fall" to this position when the stick is let go. Look at any parked Spit. Therefore correct. The trim tabs only change when the trim wheel is moved in the cockpit.

@cslvisualstudio 2 жыл бұрын

Thanks you comment

@ferdy4796 2 жыл бұрын

Stunning build mate! I'm lucky that the real thing is only a two hour drive away from me in Temora. Can I ask what colour you used for the cockpit? I typically use Vallejo Model Air. I'm yet to settle on a spit interior green. Keep up the good work and thanks! Ryan

@cslvisualstudio 2 жыл бұрын

Hi, Thanks for your kind words. I used Tamiya XF-71 for the cockpit. I like it because it has a nice green tone and with brown and dark grey washes it gives a nice cockpit tone. Please check the cockpit video on my channel and you'll see how I built it. kzfaq.info/get/bejne/f7KoaNOjmpqdhps.html

@ferdy4796 2 жыл бұрын

@@cslvisualstudio Thanks mate, much appreciated!

@b577960 2 жыл бұрын

Wow- absolutely stunning. I have this model yet to build. Can I ask what size (mm) airbrush and what pressure you run please. Personally I think this is the best looking Merlin model and you have made it look like the real Aussie machine ( There is a grey Nurse Mk VIII at Temora NSW, Australia)

@cslvisualstudio 2 жыл бұрын

Thanks for your kind words. I use two airbrushes from Sparmax. The 0.3 one is suitable for general purposes, the 0.2 is for precise works. Unfortunately, I can't tell you the pressure setting because there is no pressure gauge on my compressor. I know that OZZY beauty from Temora, she was my inspiration for this build. Stay tuned I'm working on interesting stuff... :-)

@tonyde6423 2 жыл бұрын

Nice build mate came up beautiful can i ask why you added rivets on the prop cheers

@cslvisualstudio 2 жыл бұрын

Thank you I saw an original picture of the prop. Same RAAF squadron. Propeller blade leading edge protector. Check the link below. www.abc.net.au/news/2012-04-20/flight-sergeant-ray-blacklock/3962922?nw=0

@tonyde6423 2 жыл бұрын

@@cslvisualstudio hey ur right think its actually wood screws holding metal doubler around edge of prop cheers nice pick up of extra detail

@StandByShields 2 жыл бұрын

Looks great! Wondering why didn't you use the Eduard 1/48 Aussie Eight kit?

@cslvisualstudio 2 жыл бұрын

The kit was a present from my daughter. Originally, I wanted to build the brown camo. Later I went to a local airshow and saw her. It was love at first sight ☺️

@barrywhitfield930 2 жыл бұрын

Fantasic work, it's a shame all that lovely detail will be hard to see in cockpit now the fuselage is buttoned up. The Spitfire is the most beautiful warbird IMHO, and my favourite since I was a kid

@cslvisualstudio 2 жыл бұрын

Thanks for your comment 🙂 No question, the Spitfire is beautiful.