😎

@SpongeBob wow ❤

You better do it, side by side moon wheelies with Kyle's MR2?

@SpongeBob 👍

(◕ᴗ◕✿)

My man!

@@wiawii I think he was talking about sloppy mechanics…

Bet they forget to put transmission fluid in like they did with mullet ! Actually diff fluid with mullet but close enough !

@@zzzxxzzz3248 oof

“Griffin”

Pretty much tradition at this point. The first one he gets it right, the motor will probably blow

every time he does a fire up after putting a turbo on, i think, "I wonder if he hooked the oil lines up...." thought he might have actually remembered this time

no he remembered the last time they threw the engine together

@@rhiley36 okay then he remembers 1 out of every 10 first starts. Lol

Roman knows a thing or two about messing up oil lines and filters for first start 🤣

you and me both

#MeToo

HASHTAG

Dude we have all been there. That’s what made me laugh so hard

And all the times they accidentally forgot to hookup the oil drain on turbos, he could've cut all that out. The fact that they can laugh stuff like that off and leave it in the video is why I love this channel.

Got that stupid money

And about a million loose bolts 🤣

😂keep on keepin on hahahahaha

Ethanol is some nasty stuff that’s why you should typically use non ethanol in stuff that sits like small equipment, generators, boats, etc

I don't think they have a problem keeping the lights on down there. well, except when it snows.

@@timothywarehime5956 it was a joke, based on how much they send engines back and forth

@@timothywarehime5956 damnnnn underrated comment award!

Hahaha this.

This is one of those golden comments that is both precise and accurate. Well done, sir.

If you weld a crack you're completely melting the metal, not really much use in drilling the ends. Backing gas will be a lot more useful in preventing cracks

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZfaq: This is fine Someone: Says "heck" KZfaq: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

same here that's what got me here

I dont remember what brought me here I know I was here the day he bought Leroy

Seriously!!!!!! 😎😎😎😎

Jet boats in the sand dunes? Sounds like something WD would do tho.

Yeah. Cleet asked recently about what type of content we want. I would be more than happy with unedited, or minimally edited content with just George and Jackstand. I am a simple man. I mean, Cleet is the main dude, just saying Jimmy and Squirrel are plenty entertaining. Lol.

+1 to this

His new name is Wheelstand.

True that!

*4 speed.

Me too brother

Same here!

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZfaq: This is fine Someone: Says "heck" KZfaq: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

Lol ...it's the worst for me haha. I fast forward straight through as soon as I hear it 🤣 😂 -takes all kinds to spin the world

Reminds me of southern rock from the 70's like skynyrd or almon brothers

Yes I like the handsome Mexican guy

@Erikk Hyndman the problem with Mexican is there is always some nuggets when you pull out. I think it’s the diet

Forreal though!! When was the last time you seen neighbor?

If I could like your comment a 100 times I would...I'm not even a big car guy but for some reason Ruby took my heart!...

Same, but don’t get me wrong I love Leroy too.

kzfaq.info/get/bejne/q9JiityGp7ubiIU.html

Same. Love Ruby but Leroy is still my fave. Needs some upgrades and tlc.

kzfaq.info/get/bejne/q9JiityGp7ubiIU.html

Good to hear your boy came out of it in one peace

Damn man. Did the sand trap slow him down at all. Glad he's alive tho.

Sand traps suck been there done that myself

Y'all got any video of it?

Not when its A full Roller

Normal stuff for him lol

I assume they primed the oil pump but yeah terrible

I'm just glad he left it in the video!

Yeah he was definitely the odd ball at FP. He fits right at home at the Cleeter Factory

kzfaq.info/get/bejne/q9JiityGp7ubiIU.html

Tell that to Jeff lutz lol

Learned that lesson when I didn't think it was a huge deal on a preturbo crossover pipe... Pretty sure that sugar broke off and destroyed my turbo exhaust wheel 500 miles later 😂😂

@@joelfrancisco3798 ooh very interesting possibility

No good with old dirty carboned up exhaust pipe.

@@ttv8ra23 you are correct, I should’ve specified more but I hate typing on my phone. When they made this originally I don’t remember them purging the pipe. Working on ethical refineries taught me it’s the the smallest amount of “sugar” you have to cut it out and redo it to prevent ruptures/failures in the future.

kzfaq.info/get/bejne/q9JiityGp7ubiIU.html

Hang in there buddy 🙏

God bless bro

Not gonna be much of a hood. Will be interesting to see what they do.

BUT they need far less engine hanging out the bonnet to start with. As a road racer we are not allowed any engine parts out of the bonnet. Far safer.

He's Bonified!

I'm a dapper Dan man!

Its always funny when that happens. Always little things and/or something everyone forgot about😂

Yea he fits in much better with cleetus and james. He is a great addition to the channel and to the team.

He reminds me of a young T-bag from Prison Break

That’s funny cuz I catch myself humming the tune without even hearing it lol

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZfaq: This is fine Someone: Says "heck" KZfaq: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

You guys have no taste. That stupid fuckin song is the one and only thing on this channel I've come to hate with every fiber of my being.

Farming Sim music🤣

@@remcovanvliet3018 I love all types of music. I didn’t say it was a great tune was just meaning it was catchy. And just shows how much I watch videos on the channel because it gets stuck in my head

Been wanting them to get new headlights for soooo long! Makes such a difference 👌🏻

kzfaq.info/get/bejne/q9JiityGp7ubiIU.html

@SpongeBob get your bull crap stuff out of here

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZfaq: This is fine Someone: Says "heck" KZfaq: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

They actually haven't figured that out yet, or have ignored comments about it in the past. I've definitely tried to call attention to it. There have been a lot of us commenting on it in past videos, Steve Morris even called Tom Bailey out for it on Drag Week. I think it was the same vid on Tom's channel where they visited John Forces shop, he described it in detail, Morris said its one of the most common engine failures due to driver error. Ya gotta go to free neutral on shut down or your bottom end is under massive load during its point of lowest oil pressure. Will eventually wipe out crank bearings. Hope they catch up before they spend more money needlessly.

@@QuantumLeap83 These men forget to hook up the oil drains almost every time, I foresee them not catching it.

@@QuantumLeap83 they'll blow this new motor out also... Just a matter of time

Dry sump is definitely the best option, but even an Accusump would significantly improve the reliably of maintaining oil pressure. Repeating the same action and expecting a different outcome is a sure sign of insanity. I've lost count of the number of engines they've damaged from oil starvation.

@@EDesigns_FL I think the same thing but not much ever said about Accusump anymore.

I remember being that way. lol

computers make it easy. but theres nothing like the satisfaction of making a carburetor work properly

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZfaq: This is fine Someone: Says "heck" KZfaq: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

kinda hard to run a blown up engine on gas to flush the ethanol out.

@@Sharkey_t Mr Obvious might say no duh , but you still disassemble everything after you get back to the shop, especially concerning Toast running straight Meth

@@STARSHIPTROOP methanol is a different story altogether. when i used to wrench on top alcohol stuff we used to drain the fuel at the end of everyday, pull all the fuel lines off, and fog the fuel pump and barrel valve with wd40. methanol has no sense of humor when it comes to corrosion. ethanol is a little more forgiving, depending on the gasoline content. with efi injectors its not enough to simply drain the fuel and let them drip out, if they are going to sit for a long time they should be put on an injector bench and flushed and flowed to ensure they are good when you need them.

@@Sharkey_t agreed, these guys haven't been around this stuff long enough to see what damage it can actually cause. its old wrenches like us to have to give them a heads up. they are not a pro team that has tons of procudures before they even hit the track. Asking them to buy a flow bench is a bit much but hopefully we can guide them to have the least amount of headaches.

Who cares man. We're watching because of how these guys are, not because they're pros.

Create your own group to do the same...BE that friend people enjoy having around...don't wish to be in someone else's world it will never happen

What happened to George working with Jeremy?

@@aaronwattam7420 I’m wondering the same thing

@@aaronwattam7420 Just switched just to work with the big boys

I like Georgie too, but I feel like his cracks are showing. Jeremy did a good job of hiding them because Jeremy doesn't want anyone to be shamed, but Cleeter and Jackstand will put him or anyone else on blast the second they do something dumb lmao

Good thing you left that comment. I don't think ole Cleet could do it without you.

@@eriklarson9137 Don't be that guy.

@@JimJamScadoot Erik is that guy though..

@@Jake-ev1ju I yam what I yam. Meh.

Or even the black jethot coating

They should have ty weld up real nice ones for them. Then do that😂

@@GolfingwithGrant Fab up a turbo exhaust housing?....lol

@@GolfingwithGrant found the casual

Gotta protect John Force's fingers too.

This crack was formed at a weld because there wasn't good penetration. It's different from a casting, for example, like you mentioned where you have to drill the ends of the crack to keep it from spreading. Even with drilled holes at the weld crack, it is guaranteed to crack again in a different spot because the weld was poor. To fix this properly you'd have to reweld the whole joint, not just patching cracks and pinholes.

Yup. And rig up something to vibrate the work piece while you weld. Greatly reduces stresses in the metal and helps prevent warping and cracking.

@@mayshack I agree it needs redone, the patch will last a little longer if drilled. I'm a certified welder and a farmer, sometimes you gotta fix it down and dirty then repair it properly later

It needs a brace that is bolted to the engine to support the turbo. That is a lot of weight hanging off that pipe especially during a run when the pipe is red hot. And the crack should of been v notched before being welded. And back purged. The crack probably started on the inside where the weld was contaminated.

That turbo manifold repair very sketch...will crack again v soon

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZfaq: This is fine Someone: Says "heck" KZfaq: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

It has to happen

There is always a few extra when there isn't supposed to be 😬 lol

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZfaq: This is fine Someone: Says "heck" KZfaq: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾