Spot spraying prescription maps for DJI Agras, XAG and Tractors

No video

Spot spraying prescription maps for DJI Agras, XAG and Tractors

Рет қаралды 9,764

Pix4D Agriculture

Күн бұрын

Пікірлер: 21

@user-cb4yn6tc3r Жыл бұрын

Hi Julius, great video! Am I able to leave to application rates & information for the spray drone "blank" and simply let the spray drone operator input this data during their preplanning prior to flight?

@pix4dagriculture 11 ай бұрын

Hello, currently it is not possible to change the map on the controller itself.

@underaver Жыл бұрын

Hi, nice tutorial! When I insert the SD card in my AgrasT30 remote control, I can't see the "prescription map" option to import the prescription, i only see the other two options... But in the SD there is the Rx folder. Help, thanks!

@pix4dagriculture Жыл бұрын

Hello! Make sure that your Agras has the latest firmware installed (Aircraft: 01.00.0602 Remote Controller：01.00.0602 APP：5.5.3). You would also need to put the output like this on your SD-card: DJI -> ShapeFile, Rx.

@SkrillaB999 6 ай бұрын

Question 🙋‍♂️ So after mapping the area, you get your normal A B lines. Is there a way to have it follow your spray path Basically I’m going to be spraying ditches the ditches are in a form of a long snake. So I’m trying to find out if I can follow just the ditches or will it only fly the A B lines?

@pix4dagriculture 4 ай бұрын

Hello, you could manually draw spray zones, no-sprayzones and obstacles, use the magic tool to automatically detect the ditches area and the area out of them so to create a spot spraying map only for the ditches area or mark the area outside of the ditches as obstacle. You could check our step-by-step quide on how to create a spot spraying map here: support.pix4d.com/hc/en-us/articles/11186798543261-How-to-create-a-targeted-spraying-map-PIX4Dfields

@loco67daniel 24 күн бұрын

How can I prevent the drone from covering the entire field, i want to avoid the 0 Liters areas

@SkrillaB999 23 күн бұрын

As of right now you can’t, you stuck flying the areas that don’t need sprayed

@pix4dagriculture 22 күн бұрын

Hello, in order to avoid flying over areas with 0 rate you would need to adjust the boundaries of the operation manually when creating the prescription map in PIX4Dfields. In case you have more questions please contact our support team www.pix4d.com/support/.

@moridin666 10 ай бұрын

Hello. So the QGIS is not needed anymore, like in the previous tutorials?

@pix4dagriculture 9 ай бұрын

Hello, yes you are correct, QGIS is not needed anymore with PIX4Dfields' latest update.

@jamielavercombe3163 7 ай бұрын

Hi Julius, I have an issue with sending a targeted operation to my XAG drone. I generate the map as your video show but when I send it to my drone there are some sections not there. Have you seen this in the past?

@pix4dagriculture 7 ай бұрын

Hello maybe you find this aricle helpful support.pix4d.com/hc/en-us/articles/12451352818973-Targeted-spraying-maps-for-XAG-P100's-drones-with-PIX4Dfields.

@SkrillaB999 3 ай бұрын

After putting this into the t40 remote, my gal/acre is stuck at 60 gal. How do I fix this.

@pix4dagriculture 2 ай бұрын

Hello, it's possible that the incorrect area unit was selected when importing the map.

@rdcagrotec Жыл бұрын

It seems that it does not work for Agras T40. It imports the boundary and the prescription map with variable rates (in my case 4 different rates), but doesn't show those variable rates on the screen, just a simple route with one single rate.

@julius_pix4d Жыл бұрын

After import you need to load the prescription file with the button in the top right corner. You will then see the colored map underneath your flight route.

@rdcagrotec Жыл бұрын

@@julius_pix4d Thanks' a lot, Julius, and yes, it worked as you said. Could you just clarify a couple of points? When I do like that, it works not in the Fruit Tree/Spot Spraying mode, but in the Field mode, in which I have to plan the spraying rates as liters/hectare. It can be solved by calculating the actual spraying area of each plant and then making the conversion. But is this the only way to do or there's a way to use the Fruit Tree/Spot Spraying mode plus variable rates? The other problem about the Field mode is that matching the route (which covers the whole area) with the actual spraying points doesn't seem to work.

@julius_pix4d Жыл бұрын

Here is a tutorial for XAG kzfaq.info/get/bejne/g96JmtKYyuCvko0.html

@bientmartens5633 Жыл бұрын

Hi Julius, I have a problem with my pix4Dfields that there is no Operation button next to the Magic Tool Button, mine has Zonation instead of operation and I can not get the exact files that are required for drone use with the zonation button, can you please help me out on how I can get the operation Button there ?? 5:18

@pix4dagriculture 11 ай бұрын

Hello, please make sure you are using the latest PIX4Dfields version. You can download the latest version here www.pix4d.com/download/pix4dfields/