How can I prevent the drone from covering the entire field, i want to avoid the 0 Liters areas
@corbynward62093 күн бұрын
I have a Mavic 3T would i be able to use this with it. Can it analyze solar fields. I do both Agriculture and Solar
@bautistarua91405 күн бұрын
Hi! The pix4d app doesnt support any of my drones (Dji mini pro 3 and Dji mavic pro platinum) Can you recomend me a software to make the mapping mission to then upload it to pix4d and generate the map? thanks Juan and greetings from Cordoba, Argentina.
@pix4dagriculture4 күн бұрын
Hello, thank you for your interest. DJI Mini 3 pro is supported, please see our support article here support.pix4d.com/hc/en-us/articles/8946053605149.
@bautistarua91407 күн бұрын
Hello! Can i use my Dji mini 3 pro? To do a weed mapping for spot spraying. Thanks!
@pix4dagriculture4 күн бұрын
Hello, DJI Mini 3 Pro is supported by PIX4Dfields. You can see the weed mapping workflow for spot spraying in detail here support.pix4d.com/hc/en-us/articles/17246143431325.
@bautistarua914010 күн бұрын
Hi! Multispectral is obligatory? Can i use a mávic pro?
@pix4dagriculture9 күн бұрын
Hello, you can also use RGB only as mentioned in the video, without multispectral. DJI Mavic Pro is supported by PIX4Dfields. You can see all supported drones here www.pix4d.com/supported-drones. You might also find this article helpful: support.pix4d.com/hc/en-us/articles/17246143431325.
@bautistarua91405 күн бұрын
@@pix4dagriculture Nice Thanks! can you send me a link or article on how to plan the mission for my dron to map my fields? Looking to jump into Pix4d!
@GuillermoSantana-cy9kr12 күн бұрын
hola, tienen el mismo video en español?
@pix4dagriculture11 күн бұрын
Hola, gracias por su interés. Hemos publicado subtítulos en español para este vídeo. Puede verlos haciendo clic en los ajustes del vídeo, luego en subtítulos y, a continuación, seleccionando ''Español''.
@erasmus991Ай бұрын
Hi I am having problems with my 3M..I dont have a option for mapping! I only have waypoint Route, Area Route, Linear Route, Slope Route and Geometric Route... Can someone please help me with this problem
@pix4dagriculture25 күн бұрын
Hello, you would need to opt for Area Route.
@samkanyen8349Ай бұрын
Thank you
@robertin43Ай бұрын
If the drone is not RTK, can it cause problems or are the differences insignificant?
@pix4dagricultureАй бұрын
Hello, the level of detail possible is determined by the GPS accuracy at the time of image capturing. In case the drone is not RTK, it is possible to add a buffer to the prescription map created in PIX4Dfields.
@r0b0t1z3Ай бұрын
Hey can you make an example how to export and IMPOT spot spraying on XAG P100 pro. And what do to on XAG One app. I'm intereating to buy your software, it looks amazing!
@pix4dagricultureАй бұрын
Hello, thank you for your interest! You can find answers to your questions on this video: kzfaq.info/get/bejne/g96JmtKYyuCvko0.htmlsi=BX-IfiRz26ixy8d3 as well as on our support article: support.pix4d.com/hc/en-us/articles/12451352818973. In case of any other problem you could contact our support team: www.pix4d.com/contact-support/.
@r0b0t1z3Ай бұрын
@@pix4dagriculture Thanks. Is that applicable after i make spot spray zones ? For example to use magic tool for weed.
@r0b0t1z3Ай бұрын
Very nice video and helpful. I will buy Pix4D Agriculture in near future. Can you name the company for plant counting. I couldn't hear. Or maybe Pix4D have plant counting now ?
@pix4dagricultureАй бұрын
Hello, thank you for your feedback! Plant counting was added to the latest PIX4Dfields release. You can see the latest update and download it here www.pix4d.com/blog/pix4dfields-manual-plant-counting/.
@SkrillaB9992 ай бұрын
After putting this into the t40 remote, my gal/acre is stuck at 60 gal. How do I fix this.
@pix4dagricultureАй бұрын
Hello, it's possible that the incorrect area unit was selected when importing the map.
@pintu.pati.7332 ай бұрын
🌾🌾🌾🌾🌾🌾🌾🪴🪴🪴🪴🪴🪴🪴🌳🌳🌳🌳🌳🌳🌲🌲🌲🌲🌲🌲🌲🌻🌻🌻🌻🌻🌻
@avinashkafle85422 ай бұрын
Is their any training course available now
@pix4dagriculture2 ай бұрын
Hello, thank you for your interest! You can find our training course here: training.pix4d.com/bundles/pix4dfields-essentials-online-course-and-certification-exam
@billy.dawson2 ай бұрын
You want $1600 a year for this software and this is the best English speaker you could come up with to explain the software?
@RalucaDAHolding2 ай бұрын
Hi, what is the flight height ? I am trying to count corn plants in e field.
@pix4dagricultureАй бұрын
Hello, the flight height depends on the camera and type of crop. For example, when using a DJI Mavic 3M, a flight height at 25m with 1cm GSD would be good. You can read more about PIX4Dfields' manual plant counting here support.pix4d.com/hc/en-us/articles/3600428292028.
@ConnorMullan-kl2vi2 ай бұрын
are there any vegetation indices that can accurately map water stress that are used in pix4D?
@andersonsafre22742 ай бұрын
Using a calibration panel that was designed for a camera with different wavelengths is definitely going to affect the precision of reflectance values. DJI Mavic3M wavelengths: Green: 560 ± 16 nm; Red: 650 ± 16 nm; Red Edge: 730 ± 16 nm; Near infrared: 860 ± 26 nm; Micasense Altum, RedEdge 3 and RedEdge-MX (which I am assuming this older bigger panel is from): Green: 560± 20 nm; Red: 668 ± 10 nm; Red Edge: 717±10 nm; NIR: 840±40 nm; That should be pointed out!
@bdetavernier3 ай бұрын
What’s the price tag for the dji mavic 3m
@OpenSeasonArtistry3 ай бұрын
Does Pix is only compatible with John Deere or can it be used by other brands
@pix4dagriculture3 ай бұрын
Hello, PIX4Dfields is compatible with various brands that you can find here: support.pix4d.com/hc/en-us/articles/360038644731-How-to-export-a-variable-rate-map-to-a-tractor-sprayer-terminal-PIX4Dfields.
@issamnev3 ай бұрын
I think we should make sure de-warping is ON.. right? It's annoying.
@dasilvia753 ай бұрын
Which drone did you use for this datasheet? Thanks
@brianthomas59923 ай бұрын
So this map/data can be then transferred to the agras for weed spot spraying?
@pix4dagriculture3 ай бұрын
Hello, yes, you can check our step-by-step guide here support.pix4d.com/hc/en-us/articles/360019956578-Spot-spraying-and-variable-rate-prescriptions-for-DJI-Agras-T-series-with-PIX4Dfields.
@user-bc7yl9sv5v3 ай бұрын
I Like the drone technology, are you providing training based on the image processing software? or is any means i can get free from you thank you
@pix4dagriculture3 ай бұрын
Hello, thank you for your interest. You can find more info about PIX4Dfields training here training.pix4d.com/bundles/pix4dfields-essentials-online-course-and-certification-exam
@willouwvanniekerk64764 ай бұрын
P4 vs mavic multispectral? Your opinion?
@SkrillaB9995 ай бұрын
Question 🙋♂️ So after mapping the area, you get your normal A B lines. Is there a way to have it follow your spray path Basically I’m going to be spraying ditches the ditches are in a form of a long snake. So I’m trying to find out if I can follow just the ditches or will it only fly the A B lines?
@pix4dagriculture3 ай бұрын
Hello, you could manually draw spray zones, no-sprayzones and obstacles, use the magic tool to automatically detect the ditches area and the area out of them so to create a spot spraying map only for the ditches area or mark the area outside of the ditches as obstacle. You could check our step-by-step quide on how to create a spot spraying map here: support.pix4d.com/hc/en-us/articles/11186798543261-How-to-create-a-targeted-spraying-map-PIX4Dfields
@naseemnasir5 ай бұрын
Great tutorial. Does the Mavic 3 support planning and executing of missions requiring multiple batteries?
@pix4dagriculture5 ай бұрын
Hello, yes, it supports multiple batteries!
@MuhammadHanif-ow2hm6 ай бұрын
Are there any specific conditions regarding the time of the multispectral data collection?
@pix4dagriculture6 ай бұрын
Hello, you can find this info on our article: support.pix4d.com/hc/en-us/articles/5648296477981-How-to-capture-drone-images-for-optimal-results-in-PIX4Dfields
@MuhammadHanif-ow2hmАй бұрын
@@pix4dagriculture thankyou!
@jamielavercombe31636 ай бұрын
Hi Julius, I have an issue with sending a targeted operation to my XAG drone. I generate the map as your video show but when I send it to my drone there are some sections not there. Have you seen this in the past?
@pix4dagriculture6 ай бұрын
Hello maybe you find this aricle helpful support.pix4d.com/hc/en-us/articles/12451352818973-Targeted-spraying-maps-for-XAG-P100's-drones-with-PIX4Dfields.
@andresloustaunau7 ай бұрын
Buenas noches. Cuánto cuesta sale un cielo de mapeo multiespectral..?
@lesliejulian45397 ай бұрын
💃 Promo'SM
@moridin6668 ай бұрын
What about other brands of sprayers? I couldn't find any information or tutorials about how to set up the created VRA or Spot Spraying maps into the sprayer's monitors.
@julius_pix4d7 ай бұрын
With the new release we have export formats compatible with most tractor terminals like shapefile, ISOXML and geotiff. The exact instructions on how to import a map are different for the many manufacturers. It's best to check with your terminal manufacturer how the procedure is. But we will document it as soon as we learn about it, in a dedicated article throughout the next season. In general you find all the export option in the Export Menu under Operations. 6:03
@FrankThrockmorton8 ай бұрын
Will Pix4D fields do stand counts?
@dariuszchabecki66878 ай бұрын
Please compare and what is the difference between Pix4D and DJI Terra
@samuelbouquet93818 ай бұрын
Hi! how do Pix4d Field use the calibration picture? How can we check it? Any tips for buying a calibration panel in Europe?
@pix4dagriculture8 ай бұрын
Hello, the panel type that you can use depends on the camera model you have. PIX4Dfields currently supports the following reflectance panels: Parrot, Airinov Aircalib, Sentera and Micasense. PIX4Dfields detects reflectance panel images and warns the user that calibration images were found and that they will be used to process the dataset. You can check our support page for more info: support.pix4d.com/hc/en-us/articles/360022919691-Radiometric-correction-PIX4Dfields#label7.
@ivanmacko83322 ай бұрын
Hi, will the analysis and processing work without the calibration panel? Seems hard to get and absurd expensive
@micha-yt44668 ай бұрын
Hi, is it possible to upload a field scan to fendt one?
@pix4dagriculture8 ай бұрын
Hello, yes this possible as long as ISOXML or shapefile are supported.
@RickyRyanRay9 ай бұрын
We’re you able to fly that entire plot with one battery?
@DucTung9 ай бұрын
Could you share capacity ?ha/hours.
@moridin6669 ай бұрын
Hello. So the QGIS is not needed anymore, like in the previous tutorials?
@pix4dagriculture9 ай бұрын
Hello, yes you are correct, QGIS is not needed anymore with PIX4Dfields' latest update.
@jamielavercombe31639 ай бұрын
Hi Guy's, I have just purchased pix4d fields and a DJI mavic 3m and cannot seem to export the field to my XAG V40. I tried to get FMS but only comes up with log in not create an account. Not sure on what to do, Can you help.
@pix4dagriculture9 ай бұрын
Hello, you would need to create an account using the XAG ONE app first. In case of any further issues you can contact our team here www.pix4d.com/support/.
@mookm66399 ай бұрын
How do you know how much chemical to put if it’s variable rate?
@pix4dagriculture9 ай бұрын
Hello, you could watch this video for more insight kzfaq.info/get/bejne/rb1_nMmVmL7en2g.htmlsi=ynAvz-0Qusw7SeJt.
@santiagotrujillo265610 ай бұрын
Hi, great video? What calibration target are you using for the Phantom 4 M? Where can I buy one?
@pix4dagriculture8 ай бұрын
Hello, you could try MicaSense's calibration panel. Here you can also find all panels supported by PIX4Dfields: support.pix4d.com/hc/en-us/articles/360022919691-Radiometric-correction-PIX4Dfields#label7.
@MrStannachev10 ай бұрын
Thank you very much for the thorough view of the integration between Pix4D and M3M. This combination is quite good for customers which would like to do “the things” in house and w/o having deep knowledge of NDVI, CWSI and other indices. Really helpful!!!
@lordorian82510 ай бұрын
If you use a mobile station do you have to set it in the same place every time?
@Chef.Maurizio10 ай бұрын
what was the size of the field and how long did it take to scan. Lastly how long did it take to process the map?
@pix4dagriculture9 ай бұрын
Hello, this field's size is around 12 hectares and the processing took just 2 minutes. The processing speed depends on the hardware of your computer, the field's size and whether you opt for fast or accurate processing.
@rolandgyenis840011 ай бұрын
Hi! Can i define unit/ha to kg/ha and more? Possible to owervrite the attributum table? Because we would like seeding and fertilizing makro and mikro at the same time with one maschine- but the map will define seed/ha only but i will the fertilizing differential
@pix4dagriculture11 ай бұрын
Hello, you could try creating multiple maps with different units each.
@BrunoParini11 ай бұрын
Could you use magic tool to detect weeds in a field mostly covered by grass? My client's field has 6000 hectares and he only needs to know the amount of weeds. Can I get good results if my data is RGB orthomosaic?. TIA!
@pix4dagriculture11 ай бұрын
Hi Bruno, it depends on your dataset. If the weed is visible on the orthomosaic, the Magic Tool can detect it, like Rumex Smuttgrass.
@user-cb4yn6tc3r11 ай бұрын
Hi Julius, great video! Am I able to leave to application rates & information for the spray drone "blank" and simply let the spray drone operator input this data during their preplanning prior to flight?
@pix4dagriculture11 ай бұрын
Hello, currently it is not possible to change the map on the controller itself.
@SteveM4511 ай бұрын
Can I make a heighmap with ma spark also?
@pix4dagriculture11 ай бұрын
Hello, it is possible to create a high-resolution DSM with the Accurate Processing Option in PIX4Dfields. You can see an example here www.pix4d.com/blog/pix4dfields-accurate-processing/