Woodturning - Cherry Burl with Glow Resin

Рет қаралды 57,582

3 жыл бұрын

Woodturning - In this video I combine Designer Epoxy and glow in the dark pigments to not only fill any voids in ths cherry burl but extend the rim making the bowl larger. I will also show my method for using as little epoxy that I can while doing this project, enjoy!
Starbond Adhesives: USE CODE: INLAYJIM for 10% OFF
www.starbond.com/
Sandpaper.ca USE CODE: INLAYJIM for 10% OFF
sandpaper.ca/
Epoxy and pigments used in the video
designerepoxy.ca/
Instagram
/ spraguewoodturning
Facebook
/ spraguewoodturning
Website
www.spraguewoodturning.ca/
Email
spraguewoodturning@gmail.com
If you want to send something me, send it to:
Sprague Woodturning
652 Rantz Rd
Petawawa, ON Canada
K8H 2W8
This video is for entertainment purposes, please read and follow all safety precautions with all your equipment!
American Amazon Subscribers use links below
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/34EdCJP
Timber check moisture meter
amzn.to/2Jn0XTt
Scotch Brite Hand Pads
amzn.to/34Foffq
Wood Bowl Finish
amzn.to/3mBT1Mj
0000 Steel wool
amzn.to/3e8lcQa
Soapstone carving blocks
amzn.to/37TYief
Pen I use, Pilot V5 0.5mm tip, Black
amzn.to/3mGBRgv
¾” spindle roughing gouge
amzn.to/3eeycUu
UC Coatings End Grain Sealer
amzn.to/3eb9jJ3
Easy Wood Tools Full Size Finisher
amzn.to/2HO8Ssx
Pressure Pot for Casting by California Air Tools
amzn.to/31Xm0T2
Canadian Amazon Subscribers use links below
Crown Pro Turning Parting Tool
amzn.to/3mCIEIo
Wood Bowl Finish
amzn.to/34DZ1Ox
0000 Steel wool
amzn.to/3jBfEyI
Soapstone carving blocks
amzn.to/3kJPX03
Pen I use, Pilot V5 0.5mm tip, Black (you can select the quantity when you get there)
amzn.to/3kUtU6U
Easy Wood Tools Full Size Finisher
amzn.to/3myOAC0
Pressure Pot for Casting by California Air Tools
amzn.to/2TCY9n5
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/3oINYvF
Timber check moisture meter
amzn.to/34GJs8V
Scotch Brite Hand Pads
amzn.to/2TFnqNy
As an Amazon Associate, I earn a small commission from qualifying purchases. By purchasing from the links above, you are supporting this channel so I can bring great content every week! Thanks!
Ellsworth Signature Bowl Gouge
www.leevalley.com/en-ca/shop/...
Typhoon Carving Burrs
www.leevalley.com/en-ca/shop/...
Sculpture Supply Carving Stones
www.sculpturesupply.com/list....
Sculpture Supply Lead Free Pewter
www.sculpturesupply.com/detai...
Oneway Manufacturing Easy Coring System
oneway.ca/index.php?route=pro...
Saltmill Mechanisms
woodchuckers.com/products/cs-...
Peppermill Mechanisms
woodchuckers.com/products/che...
R&D Bandsaw Blades
tufftooth.com/product-categor...
Oneway Vacuum Chucking System
oneway.ca/products-category/c...
Combination Skew Chisel and Gouge
www.leevalley.com/en-ca/shop/...

Пікірлер: 548

@BlondiNativeAme3 8 ай бұрын

I've learned practice makes perfect. I started working on my family tree back in 1999 and just learning. Now my tree is more detailed and I go back to the beginnings some times and fix errors I made way back then. I am always learning new ways to do things so.... the more you make castings, the better you get at it. I love watching your videos and went to your play list to watch from your 1st video. I am now up to your 3rd and love watching you progress with each new video. 😊🥰 Love the purple shades you use and also love pinks and light shades of blue 🙂

@SpragueWoodturning 8 ай бұрын

I've come a long way since shooting this video, lol. Thanks

@AlexaMGrimes 3 жыл бұрын

You may not realize just how much of a compliment this is, but I have the sound on for your videos. Thanks for explaining why you're doing the things you do. Beautiful work

@SpragueWoodturning 3 жыл бұрын

Thanks, I’ll take it, lol

@thereallyrealchristina Жыл бұрын

The bright line of the glow hugging the natural edge of the bowl makes it look like mountains with snow. It's beautiful. Whomever gets this bowl is lucky. I'd love to have any of your pieces in my home. I would display them proudly.

@SpragueWoodturning Жыл бұрын

Thank you very much

@stephanieparker1250 Жыл бұрын

Lol I think it’s safe to say you won’t be using this method of resin casting again. I’m glad you filmed all this, I learned a lot! The big rock you use in newer videos seems to be easier! 🎉

@SpragueWoodturning Жыл бұрын

Lol, thanks for watching!

@dianelangendorf3941 Жыл бұрын

Loved this one. The transparency of the top so you could see the edge of the wood part of the bowl mad a super cool effect.

@SpragueWoodturning Жыл бұрын

Thanks 😊

@Zincchromeshema 3 жыл бұрын

I love the softer transparent resin colors like this. This is so beautiful.

@SpragueWoodturning 3 жыл бұрын

Thanks Lili!

@angelbecks985 Жыл бұрын

I’m by 💯 you figured out the splatter/splash situation of today’s adventure at hand! ?!!!

@coopsbury 2 жыл бұрын

I just wanted to say I’m so pleased you mentioned left handed turning. I am in fact right handed when it comes to everything, EXCEPT for turning! 😂 I’ve been struggling with bowls, but now I’ve realised that I am only comfortable turning left handed, I will try and adapt my methods accordingly. Thank you! Great work as always too! 😊

@SpragueWoodturning 2 жыл бұрын

Wow, never heard of that before, lol. Get a lathe with lefthand threads on the outboard end, that way the lathe bed isn’t in your way, it way more comfortable to turn that way. Thanks!

@andreakernohan5299 Жыл бұрын

It's interesting that despite which ever pigments you add to the resin that the shavings are white. I enjoy hearing the sound of the gouge eating into the piece, it's soothing 🥰

@SpragueWoodturning Жыл бұрын

Thanks 😊

@bonitagoodwin5086 11 ай бұрын

It's gorgeous ❤ I love it ❤ Great job ❤

@fredbounocore7242 10 ай бұрын

Hi Jim,wonderful approach to increase the size of the burl bowl. P.S I have made a habit of spraying the inside of my pressure pot before each use,. Invariably there always seems to be a small amount of resin that "spays up". Also found that a soak in acetone can clean up the pot (also gauges ) Thanks again for more great ideas ! Fred Buonocore Shelter Island ,N,Y,

@SpragueWoodturning 10 ай бұрын

I e started doing that myself, not every time but every now and then. Thanks

@robboland9857 Жыл бұрын

The glow in the dark is cool. Love the see thru rose, looks stunning. Another fine work of art sir🌿 👍👍👍

@SpragueWoodturning Жыл бұрын

Thank you! Cheers!

@Dustin_the_wind Жыл бұрын

It is pretty neat to have watched your videos back to front, and see how you and your process evolved for the finish product and cost. Awesome bowl to resin/color ratio as always, looks like a sea floor shot in the uv light. Thanks Jim

@SpragueWoodturning Жыл бұрын

Thanks for watching!

@c.a.chambers68 5 ай бұрын

I absolutely love being able to see the peaks + troughs of the burls through the resin - the glow factors it up another notch

@SpragueWoodturning 5 ай бұрын

Can’t argue that. Thanks

@user-nx8gk1le2m Жыл бұрын

I love that effect, you should definitely do more like this one.

@SpragueWoodturning Жыл бұрын

Thank you very much!

@tombartolomei4398 10 ай бұрын

Your Engineering background sure does come in handy. This resin pour is really complicated. Thanks to your voice-over your thinking is shared with the rest of us.

@SpragueWoodturning 10 ай бұрын

Thank you very much!

@BAILEYWOODWORKS 3 жыл бұрын

Great idea to save resin! Not only is it expensive it is just turned away and fills the land fills. We should always look for ways to be more efficient!

@SpragueWoodturning 3 жыл бұрын

Agreed! Thanks 🙏

@marycatherinelebouef-op4hf Жыл бұрын

Wowza! That is a true masterpiece! It’s well worth all the issues that occurred in the pressure pot! Too cool! Great job!!

@SpragueWoodturning Жыл бұрын

Thank you! Cheers!

@mariverhagen8082 Жыл бұрын

I love the transparency on the piece. The cherry Burl is Beautiful! I'm Partial to burl and walnut.

@SpragueWoodturning Жыл бұрын

Me too! Thanks

@relaxyourbee 3 жыл бұрын

Using tuck tape on both sides of plastic prevents tearing and makes easier to form plastic plus you can reuse for future projects:>) the plastic makes a smoother finish for later when you put on the machine and helps prevent sticking while removing plastic Your the man I had to tell you the secret:>) Your still a great man, Respect from Canada 2021.

@SpragueWoodturning 3 жыл бұрын

Thanks again!

@susanburrows5288 Жыл бұрын

the glow looks like ocean action against underwater sand, so cool!

@SpragueWoodturning Жыл бұрын

Thanks 😊

@lindapepper1067 Жыл бұрын

Beautiful bowl! The cherry wood is even more stunning then the walnut.

@SpragueWoodturning Жыл бұрын

Thanks for watching!

@dottyharbison7156 2 жыл бұрын

Beautiful bowl love burl and resin! I love glow in the dark as I collect vaseline glass it glows with a black light. Great going Jim!

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@janreynolds2476 2 жыл бұрын

This is my favorite piece of all you've done. I love the translucent property. It is beautiful. I can see it as a center piece on a dinning room table or a coffee table conversation piece. Absolutely beautiful.

@SpragueWoodturning 2 жыл бұрын

Thanks!

@diedredunham7383 Жыл бұрын

I like the glowing and the edge of the burl is great! Great job.

@SpragueWoodturning Жыл бұрын

Thank you very much

@onexpressocafe1821 2 жыл бұрын

My daughter loves your pink glow in the dark bowl!

@SpragueWoodturning 2 жыл бұрын

It’s really cool, Ed to make one of these again, thanks

@tanawj 2 жыл бұрын

Beautiful! Love the soft transparent pink

@SpragueWoodturning 2 жыл бұрын

Thank you! 😊

@moniquemontague8645 3 жыл бұрын

Whoaaa! Another beautiful bowl! When it glowed in the dark, it's like magic! Pinkish purple in the daytime, glowing eerie blue in the dark. haha! It reminded me of haunting ridges on the ocean floor, and the movie "The Abyss". Thank you! Another exquisite bowl. 👍🏻 ⭐️ 🔥 🤗 🇺🇸

@SpragueWoodturning 3 жыл бұрын

It’s pretty neat, need to make another one, thanks.

@marilynhohnstein8477 Жыл бұрын

Jim, what a beautiful bowl, amazing graining of the burl. Really beautiful

@SpragueWoodturning Жыл бұрын

Thank you very much!

@villehursti 3 жыл бұрын

Jim, much kudos on taking the economic route with the resin. Way too many makers pour "gallons" of resin and turn 95% off during the process. I don't know jack about resin turning, but I can see the waste. Merry Christmas and thanks for another nice video.

@SpragueWoodturning 3 жыл бұрын

Thanks Ville!

@davehanson6915 3 жыл бұрын

Love your resin saving idea. Bowls not so shabby either

@SpragueWoodturning 3 жыл бұрын

Thanks Dave!

@brucegibson8053 Жыл бұрын

First of all, being a fellow "south paw", I like the way you point out the ways we get over the "challenges" we face and also the ways we win over these challenges. I wonder if a release agent would have worked on the pressure pot & marbles? I'd also like to add, I never had any interest in epoxies in turning until I started watching you channel. Inspired to say the least!

@SpragueWoodturning Жыл бұрын

This was one of my earlier pieces, I’ve changed up a lot of the procedures now. Thanks for watching!

@lokibottleoff9550 2 жыл бұрын

Don't know what to say. Just... AWESOME!!!

@SpragueWoodturning 2 жыл бұрын

Thanks!

@cooperken11 3 жыл бұрын

The guy’s that do our marble benchtops always clean up their scrapers etc by using the heat gun to soften the cured epoxy and scrape it off, it works a treat so I’m sure heat and friction was the problem their even once completely cured. Thanks for the great video.

@SpragueWoodturning 3 жыл бұрын

Yes, your probably right, thanks.

@catherinegue6427 2 жыл бұрын

I love the translucent bowls,such a pretty pink

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@MikeT 3 жыл бұрын

Since you had the bowl on the marbles it was pretty close to the lid, when you pressurized it, the air went straight down and blew the resin up

@SpragueWoodturning 3 жыл бұрын

This is the general consensus. I still think there might of been an air pocket trapped in the base of the bowl and then spit out when pressurized, thanks. I pressurized the pot really slow but it certainly could of been it.

@timcornwall5247 3 жыл бұрын

that was my guess Mike

@demos235 3 жыл бұрын

This is what I thought. Pushed a bubble out from under the bowl and it spattered. Maybe cut a spatter guard out of the 6 mil or use one of those dollar store bacon shields in future...

@jdub2716 3 жыл бұрын

Thank you

@gunnarveivag4610 2 жыл бұрын

Think so to.

@judithfairchild8620 2 жыл бұрын

Whoa that is beautiful in the light and dark.

@SpragueWoodturning 2 жыл бұрын

Thanks Judith!

@jeanb103 11 ай бұрын

I really like the softer color of resin. It is beautiful

@SpragueWoodturning 11 ай бұрын

Thanks so much 😊

@PattersonPatch 3 жыл бұрын

the problem with why the resin went everywhere is because of when you added the pressure to the pot the incoming air hit the resin splashing it. you need a way to redirect/deflect the incoming air to not hit the resin directly. Which is why if you look at some of the mold rack systems they have a top unused shelf that just deflects the incoming air to not hit the resin.

@SpragueWoodturning 3 жыл бұрын

Good info Bryon. I’m going to go back and look at the raw footage and see just how fast I put the pressure in the pot, thanks.

@WackeyWorxWorkshop 3 жыл бұрын

If you add a diffuser at the bottom of your intake it'll stop that. It happened to me as well.

@stevemclean2817 3 жыл бұрын

That was my guess too! Good call!

@SpragueWoodturning 3 жыл бұрын

I pressurize really slow ( I looked at the raw footage) so I’m thinking it was a trapped air pocket the popped spraying resin everywhere

@WackeyWorxWorkshop 3 жыл бұрын

@@SpragueWoodturning when I first started resin cast in a pressure pot I had the same thing happen to me all the time. After Jake Thompson showed me that if you use a defuser at the bottoms to the top it will not blow air into the fresh resin and cause it to splatter and I no longer have issues.

@davidhahmsr.3937 6 ай бұрын

You have such knowledge do to what you have done. I am constantly learning watching and listening to you. The true definition of a artist. I am addicted to you and learning from your experience. Thank you for your sharing and teaching us through your experience.

@SpragueWoodturning 6 ай бұрын

You are so welcome! I appreciate that! Happy you are learning from me!

@paulsedelmeyer4098 3 жыл бұрын

Jim,the black knob just below the air intack is to allow a small amount of pressure at a time. pull knob out and turn counter clock wise, attach air hose open valve adjust knob slowly clockwise to allow small amount of air till you get to 60psi

@SpragueWoodturning 3 жыл бұрын

I took all the regular stuff off. Too many places to leak. I will just be more careful when putting the air in next time. Jim.

@stevemclean2817 3 жыл бұрын

Jim, yet again, a beautiful outcome. Thank you so much for your posts. I’m learning so much not only from the obvious things you’re sharing but also from watching you make subtle adjustments to how you approach the wood with your tools and in particular, the gouges. Thanks a ton!

@SpragueWoodturning 3 жыл бұрын

No problem Steve, thanks for watching!

@cathuggerniowacity 2 жыл бұрын

Hey Jim. The translucence is soooo cool! Love looking down through the resin. The mountain effect is super. Beautiful burl, too.

@SpragueWoodturning 2 жыл бұрын

It totally is, thanks

@CharlotteBethany54 Жыл бұрын

Omg it's the most beautiful thing. Every time Jim. Some are more spectacular than others and that's part of the fun!

@SpragueWoodturning Жыл бұрын

Thanks 😊

@Maisie9798 2 жыл бұрын

You did it! It glows! It's just such beautiful work!

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@young11984 3 жыл бұрын

Nice the way it lights up in the rim of the wood more

@SpragueWoodturning 3 жыл бұрын

Ya, it’s pretty cool, thanks 🙏

@bennycolburn1341 9 ай бұрын

Very beautiful glow in the dark

@SpragueWoodturning 9 ай бұрын

I think so too! Thanks

@OurFrenchHouseRenovation 3 жыл бұрын

Again a nice looking Bowl.... as you say you learn something new every time.. cheers

@SpragueWoodturning 3 жыл бұрын

Thanks Grahame!

@MargaretGeorgemgse 2 жыл бұрын

That is way cool. Makes the edge of the wood really stand out!

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@dianestainer7843 2 жыл бұрын

Hi Jim thank you so much for a very beautiful bowl, my husband loved real wood and glow in the dark things so this piece would have been his favourite of all your gorgeous things and would have taken pride of place in our living room, true master at your heart xx

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@johndaniels7213 3 жыл бұрын

It certainly turned out to be beautiful.

@SpragueWoodturning 3 жыл бұрын

It’s pretty neat, need to make another one of theses, thanks

@rayworstine4399 3 жыл бұрын

Excellent bowl, Jim. The finish is crystal, very well done. We are always learning. Thanks for helping us with our education.

@SpragueWoodturning 3 жыл бұрын

Thanks again Ray!

@EPgeek 3 жыл бұрын

Better video title: "Jim loses his marbles" :D Since you're using a resin with a really long cure time, it'll take a long time for it to fully harden. You should be able to help it along by raising its temperature a little. Regardless, the bowl turned out great!

@SpragueWoodturning 3 жыл бұрын

Jim lost them a long long time ago, 🤪🤪. It’s sitting at about 75F in my clean room. I was also thinks about wrapping a truck battery blanket around the pot as well. Then she’ll cook, lol. Thanks

@demos235 3 жыл бұрын

Toss the pressure pot in the kiln when it's curing

@jencstephens5452 3 жыл бұрын

Very beautiful! And I love the idea of using marbles for spacers and weights! I too have ran into the resin getting soft when heated..... In fact there are art resin techniques that require heating set resin, mechanically fixing desired shape, and when cooled it will hold the new shape. With all that said, leaving it to cool will reharden the resin, and be careful how hot you get it because if it can droop, it will cool as an oval rather than a round bowl 😉

@SpragueWoodturning 3 жыл бұрын

I never showed it but I placed the rim around a from to make sure it would stay true once I noticed it was getting soft. Thanks

@jencstephens5452 3 жыл бұрын

Was showing my husband your video tonight, and noticed 2 things..... We have the exact same pressure pot that you do, and..... Your air diffuser is missing from the underside of the lid. Ours fell out once, and we found it inside the set resin, lol. Look around, being this is your third resin bowl, and first issue with the pot..... The little thing is close 😉

@SpragueWoodturning 3 жыл бұрын

I might of removed it when I took the regulator off, just too much stuff to leak. I don’t remember it being there tho.

@morgancalvi6675 Жыл бұрын

Beautiful job Jim...beautiful. Explaining outboard and left-handed threads would make a good video--hint, hint.

@SpragueWoodturning Жыл бұрын

Thanks 👍

@AmyMcScience 3 жыл бұрын

I really like these translucent resin pieces. It's neat to see the wood through the resin.

@SpragueWoodturning 3 жыл бұрын

It’s pretty neat and plan on making more in the future, thanks 😊

@ssue4q 3 жыл бұрын

Wow wow wow with each video I'm loving more and more lol another absolute stunner and the fact that you get two colors in one basically is so freaking awesome! I love the almost transparent look in the natural daylight. And love the Smokey blue effect in the dark .The wood is absolutely gorgeous! It's crazy where the wood meets the resin twards top of bowl the wood looks like a mountain scene & in one place it even looks like trees with mountains behind it.So very 😎 Thanks for sharing.. the giveaway bowl is absolutely beautiful

@SpragueWoodturning 3 жыл бұрын

The mountain areas of the bowl are really cool to look at and the intense blue that it turns into is really mystifying as well, thanks.

@ssue4q 3 жыл бұрын

@@SpragueWoodturning yes!💗

@larryknowles4813 Жыл бұрын

Absolutely stunning. Nice job!

@SpragueWoodturning Жыл бұрын

Thank you very much!

@davecurda2350 3 жыл бұрын

Absolutely gorgeous Jim.

@SpragueWoodturning 3 жыл бұрын

Thanks Dave!

@lawrencemcnamara4321 3 жыл бұрын

Very nice, I lost my marbles a long time ago and it looks you found them. Great job

@SpragueWoodturning 3 жыл бұрын

I think your right, I will send them to you for Christmas, haha. Thanks

@balkis76 3 жыл бұрын

OMG, is glowing, looks amazing !!! Your signature is the quality seal.

@SpragueWoodturning 3 жыл бұрын

I believe it’s important to sign your work, thanks Maria!

@sweetlandsheatingcooling9039 3 жыл бұрын

Nice bowl. The glow is great.

@SpragueWoodturning 3 жыл бұрын

Thanks, it’s one of my favorites.

@douglaskosowski9936 Жыл бұрын

Love the glow.

@SpragueWoodturning Жыл бұрын

Thanks for watching

@lesliehales2303 2 жыл бұрын

I really like the glow effect and I love that colour pink with that wood really pretty. You do a great job, and explain things well. Thank you.

@SpragueWoodturning 2 жыл бұрын

Thanks for watching!

@jameshodgins1937 3 жыл бұрын

Beautiful bowl!

@SpragueWoodturning 3 жыл бұрын

Thanks.

@paulawalker7706 Жыл бұрын

Fantastic job Jim

@SpragueWoodturning Жыл бұрын

Thank you very much

@JMS-2111 3 жыл бұрын

The higher atmosphere pressure in the pot forces the resin into all the holes the wood has, the air is pushed up and like boiling water on high heat, when the bubbles got to the surface, they popped and sprayed the surrounding area.

@SpragueWoodturning 3 жыл бұрын

This is exactly what I think was the problem, thanks.

@jamessparks4584 Жыл бұрын

Love it, it turned out beautiful

@SpragueWoodturning Жыл бұрын

Thanks

@siph2o 3 жыл бұрын

I put a 90 deg. elbow on the inside of the lid on my pressure pot to direct the air to the side when I put the air to it. I'm thinking that's got to be the reason it splashed around on you inside the pot.

@SpragueWoodturning 3 жыл бұрын

Yes, that or air being trapped under the plastic at the bottom, thanks.

@ianb1482 3 жыл бұрын

Lovely bowl Jim, thanks for sharing.

@SpragueWoodturning 3 жыл бұрын

Thanks Ian!

@abidinginhim1 Жыл бұрын

That is a beautiful bowl!! Love the pink with the cherry.

@SpragueWoodturning Жыл бұрын

Thanks 😊

@garethharris6199 3 жыл бұрын

Hi Jim.. what a really beautiful bowl. it looks like you’ve captured the Northern Lights in that resin 😊.. also, love that buffing system - hope I can find the same over here in the UK.. Looking forward to a possible Christmas theme.. Seasons greetings to you..

@SpragueWoodturning 3 жыл бұрын

Thanks Gareth, seasons greetings to you too!

@joallawestervelt6918 3 жыл бұрын

Beautiful. Well done

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏🏻

@adrienerussell3194 3 жыл бұрын

Nicely done!

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏

@traciguernsey4622 Жыл бұрын

I love this one!!! Wow!!!

@SpragueWoodturning Жыл бұрын

Thanks

@laurawright7404 3 жыл бұрын

Nice technique for saving on resin. Never could understand why people turn away half of their resin

@SpragueWoodturning 3 жыл бұрын

It was one of the things I wondered about as well, thanks

@ihaveyourkeyes 3 жыл бұрын

Half? Sometimes it's at least 90%

@markb8954 3 жыл бұрын

Id say the ppl turning half or more away are getting freebie samples & product to use in their videos. Resin is expensive, it’s good to use the least amount as needed. The rest of the shavings get vacuumed up.

@blewis5929 3 жыл бұрын

Beautiful!

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏

@scottcooper578 3 жыл бұрын

That bowl is BAD ASS cool!

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏

@scottcooper578 3 жыл бұрын

@@SpragueWoodturning You're really welcome! Do you have a website where your bowls etc. are sold?

@wollowwasp 3 жыл бұрын

It's beautiful!!!

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏

@wandapiedra8973 3 жыл бұрын

Stunning piece of art like always! Spectacular!👏🏻👏🏻👏🏻👏🏻👏🏻👍❤️

@SpragueWoodturning 3 жыл бұрын

Thanks again Wanda!

@heingab 3 жыл бұрын

I love the way this one turned out. Good stuff

@SpragueWoodturning 3 жыл бұрын

Thanks Gabriel!

@timtravis5685 3 жыл бұрын

That turned out beautiful. It's cool how it glows blue! I can't wait to see what you do by combining resin with an inlay!

@SpragueWoodturning 3 жыл бұрын

Thanks Tim!

@Armygirl82-85 Жыл бұрын

Watching I get mesmerized, wish I had your talent

@SpragueWoodturning Жыл бұрын

Thank you very much!

@metfrk81 3 жыл бұрын

I like the video. I like the bowl . I learn a lot by watching and your videos do a good job of walking one through all that you're doing. As a new turner, I just figured out, as of an hour ago, my 2nd hand tools are for spindles. * Sigh *

@SpragueWoodturning 3 жыл бұрын

The great thing is you only need a bowl gouge and a parting tool to do inlayed bowls, safe turning! Thanks.

@thornbird6768 3 жыл бұрын

Stunning , I think this is my favourite resin you’ve done 👍🏻 simple but so effective ♥️

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏🏻

@lakeshorewoodturner5136 3 жыл бұрын

It looks very good Jim. Nice job.

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏

@ericschenck9954 3 жыл бұрын

Wow that turned out really great!!

@SpragueWoodturning 3 жыл бұрын

Thanks Eric!

@rogeryork489 3 жыл бұрын

Vary nice bowl. I like the glow-In-the dark feature. Great job!!

@SpragueWoodturning 3 жыл бұрын

It’s really cool, need to make more of theses, thanks

@JohnPaul-ry8kx 3 жыл бұрын

That turned out great. Thanks for another awesome video.

@SpragueWoodturning 3 жыл бұрын

Thanks John!

@benjabens2058 3 жыл бұрын

beautiful bowl!nice glowing!happy hollidays!

@SpragueWoodturning 3 жыл бұрын

Same to you! Thanks.

@chrisbucy7860 3 жыл бұрын

Love the bowl. The marble idea will definitely be one I keep in mind.

@SpragueWoodturning 3 жыл бұрын

It works great for stabilizing. Thanks.

@markb8954 3 жыл бұрын

Yep, those marbles are like using beans in a pre-baked pie crust.

@huangxiajing9986 2 жыл бұрын

It is so beautiful.

@SpragueWoodturning 2 жыл бұрын

Thanks 🙏

@leisongivangomo5656 3 жыл бұрын

Jim! As always exquisite work! 💫👏🎉I like your ingenuity on saving the resin. Sorry it created a splatter effect in the pressure pot. However, Before you clean it, sit it out in the sun and put a go-pro inside it to see the cool ink spot when closed. If it works, please share the pic. 🤩 You should also consider making marble sculptures with resin! Very cool! 😎

@SpragueWoodturning 3 жыл бұрын

There’s no way to clean the resin out of the pot, it’s welded itself to it. It’s now a permanent pot feature, lol. Thanks

@leisongivangomo5656 3 жыл бұрын

At least you know it’s yours when go on tour again. Just in case someone else has the exact same unit and stickers! 😂🤣

@carltopdog1587 6 ай бұрын

Beautiful stuff ❤

@SpragueWoodturning 6 ай бұрын

Thank you! Cheers!

@frankbloom8228 3 жыл бұрын

Nailed it. Love it.

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏

@jackknows6509 3 жыл бұрын

That is really cool!!

@SpragueWoodturning 3 жыл бұрын

Thanks!

@joandow5627 2 жыл бұрын

Spectacular!

@SpragueWoodturning 2 жыл бұрын

Thanks 😊

@margaretwilliams5281 Жыл бұрын

Love it Jim.

@SpragueWoodturning Жыл бұрын

Thanks 😊

@exotictones1054 3 жыл бұрын

That's a really cool bowl.nice job.

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏🏻

@TanyaBecherWoodturning 3 жыл бұрын

So amazing!

@SpragueWoodturning 3 жыл бұрын

Thanks Tanya!

@andreproulx3047 3 жыл бұрын

Very nice Jim, love your videos.

@SpragueWoodturning 3 жыл бұрын

Thanks 🙏🏻

@janeoverby2151 3 жыл бұрын

It is a beautiful bowl! You had some great success with the glow in the dark pigment!

@SpragueWoodturning 3 жыл бұрын

It’s fun! Thanks