SPRAY Paint Your Car (At Home) With Professional Results + (Tips & Tricks)

Рет қаралды 208,166

Ай бұрын

In this video I show how to use rust-oleums turbo can to spray the bed side of my 1972 c/10.This can will throw down the paint pretty heavy so be careful when using this product. I share a ton of tips and tricks that I've learned over the 20+ years in the custom restoration world. I hope y'all enjoyed this video and maybe it helped answer any questions that you may have had. Ill link all the products below that were used in this video. These links are amazon affiliate links that don't cost you any extra to use. I make a small percentage off of qualified purchases. Make sure you like, subscribe and share with your friends!!!!
Paint Shaker 4000 Video Link • Build your own FREE (S...
Links Below
My Website to buy Shirts www.acdesignsgarage.com
My PO Box Below:
PO Box #782 Troutman NC 28166
Rust-oleum turbo can amzn.to/3UBsYbZ
Mineral spirits Paint Thinner amzn.to/3PXPh94
Red Scotch Brite amzn.to/4aGRdeb
Sprayway Glass Cleaner kit amzn.to/4aMaWt1
3m Mask amzn.to/4a0zrmk
HOSE CLAMP amzn.to/48EO2C8
Sawzall Blade amzn.to/3P6A2ua
Sawzall amzn.to/4bYG7Cv
isopropyl alcohol amzn.to/3WdGPGM
Scott shop towels amzn.to/4demzuG
tac cloth amzn.to/4bgdFv4
3m 233+ 1 1/2" tape amzn.to/3wcdfGW
12 inch masking paper amzn.to/4dhJO75

Пікірлер: 263

@DanOne1513 13 күн бұрын

Professional painters can appreciate how effective this actually was... I professionally painted for years and around several great painters and can appreciate the very inexpensive results here and the ease involved...thumbs up on this one for sure!

@ACDesignsGarage 13 күн бұрын

Thank you for watching!!!

@Mr.Wongburger 16 күн бұрын

2k clear please. For those of us looking to have a longer lasting coat. I think warming the cans prior to laying a cost down will help with reducing the orange peel effect. The prep is obviously the biggest factor in getting a decent job with spray cans. It will. Always come down to time spent before and after with the rattle can job. But you can achieve a good paint job. The 2k clear will help it last, but again you're going to have to put the work in to make it smooth and presentable. Thank you for taking the time to put this video together.

@ACDesignsGarage 16 күн бұрын

Thank you, im shooting for this week on the 2k alot depends on the weather, thanks for the tips and for watching!!!!

@perryamicangelo4008 Күн бұрын

Thanks for taking the time to show us about this paint ! The local body shop wanted 9 thousand to paint my 4 door 86 Cutlass, wow! I'm 67 years old and remember how it was like everything else....My plans are flat black Turbo spray, matte finish should be more forgiving...excellent video, just like your my neighbor walk down the block and showing me in person. Subscribed ......!

@ACDesignsGarage 4 сағат бұрын

Thank you very much for watching, so glad I could help. Good luck on your cutlass, I love that body style!!

@vetteman95 28 күн бұрын

I can remember seeing factory paint jobs from late 50's to early 60's that didn't look any better then what you've done here!!

@ACDesignsGarage 28 күн бұрын

Hahaha thank you, were gonna make it look better this week!!!

@robertcabral1366 Күн бұрын

Super nice coming out of a paint can!!! I am going out to by can of this stuff for my next project. Thanks for showing me this product, and explaining it...

@ACDesignsGarage 4 сағат бұрын

Thank you for watching!!!!!

@briansawdo6245 22 күн бұрын

Thank you for not rushing through. We need to hear about taping and the right type of materials. When I get to this point I want to try this type of paint job.

@ACDesignsGarage 22 күн бұрын

Thank you, I enjoy sharing what took 20 years to learn and sharing with friends!!!!

@66chevelle1 29 күн бұрын

It would be cool if you did one side like this with a cut and buff then the other bedside one coat with 2k clear. Then do monthly reviews until you build the truck. Would make a great comparison.

@ACDesignsGarage 28 күн бұрын

Thats a great idea, i may try that!!!!

@bennettbritton4029 27 күн бұрын

I second this also!

@kajbyman3006 9 күн бұрын

Amazing job.Have been working with cars since 1985,but have never seen such a good result with a spraybox.Unfortunately that paint can't probably not been ordered to Europe,due to our stupid laws..Thanks for the video👍

@ACDesignsGarage 9 күн бұрын

Man that stinks, can you get the regular smaller cans? I'm gonna do a video with them soon and we're gonna strive to make it show car quality!!!

@jeffreysmith3704 23 күн бұрын

Thanks for sharing your tips and tricks with us! This gives me a lot of ideas for some paint jobs I see in my future.

@ACDesignsGarage 22 күн бұрын

Thanks for watching, glad it helped

@josephbragg1162 22 күн бұрын

That was funny, I always say fungus amongus 😂. Great video and I've watched a couple with this can and I just cannot believe how wide that spray pattern is and how fast it covers. They are definitely onto something especially for people on a budget and want to save a few bucks and get a job done quicker.

@ACDesignsGarage 22 күн бұрын

Hahaha there pretty awesome, thank you for watching!!!

@johnelliott7375 17 күн бұрын

The first coat looked really good if it was covered to the point that you could not be able to see it I would have liked how shiny it was. I'm a fan of red though, I hope you have a great day and enjoy your weekend. God bless you and your family also.

@ACDesignsGarage 17 күн бұрын

Yeah I loved the first coat, then I steped back and saw light spots so I had to do another. That stuff does not like 2 coats lol thanks for watching, yall have a Blessed day 🙏

@johnelliott7375 16 күн бұрын

@@ACDesignsGarage Have a great Sunday

@colesheperd1165 5 күн бұрын

Love your video brother thanks im new to painting.

@ACDesignsGarage 4 күн бұрын

Thank you for watching, I hope I can Help!!!

@thefamily_ak1863 Ай бұрын

I've learned a bunch , thx man

@ACDesignsGarage Ай бұрын

Thank you very much!!!

@neilmanahon1485 10 күн бұрын

Straight to the point. Thank you!!

@ACDesignsGarage 10 күн бұрын

Thank you for watching!!!

@717273mopar 17 күн бұрын

Great Video, Thanks for the great tips.

@ACDesignsGarage 17 күн бұрын

Thank you for watching!!!!

@camcutcnc 10 күн бұрын

Hell yeah, lets see the color sand and buff !!

@susanray975 15 сағат бұрын

So helpful... Great video...

@ACDesignsGarage 4 сағат бұрын

Thank you!!!!

@JamesSmith-hx3lp 29 күн бұрын

Great video! Looking forward to cut buff and clear coat.

@ACDesignsGarage 26 күн бұрын

Thank you, the cut and buff will be this weekends video, just shot it!!!

@billymaul8139 17 күн бұрын

love this pretty cool paint

@ACDesignsGarage 17 күн бұрын

Thank you!!!!!

@martinbowers852 26 күн бұрын

that was a lot of work to show us how to do that, thank you for that

@ACDesignsGarage 26 күн бұрын

Thanks for watching, I shot the cut and buff video this week it turned out awesome, like glass, it will go up Friday or Saturday this week!!

@natebosworth6634 28 күн бұрын

They make a 1k turbo clear. It holds the gloss and lasts decent. Ive used the white on a delivery truck about 4 years ago.

@ACDesignsGarage 28 күн бұрын

Awesome I haven't seen that yet in my area!

@anthonyjames2114 21 сағат бұрын

Warm you can up with warm water before spraying

@tammiroy0 23 күн бұрын

Well I'm glad you tested it so therefore I will know to try to make one good passing without running the paint because if I try to make a second passing it's going to Orange Peel like crazy thank you for your video and your info do appreciate it 👍

@ACDesignsGarage 21 күн бұрын

Thank you, I think if I'd of held the can back a lil futher it probably would of been a lil smother!!!

@stuck1000 Ай бұрын

Great tips as always, man. Love the channel. Turbo cans are great. If Rusto ever gets them to spray as finely as regular cans, then they'll really be a game changer. Also, I'm glad you gave the tips about spraying rattle cans and going heavier. My stuff would come out dusty and streaky when I did light coats. Gotta be like a graffiti artist and coat it fully, runs be damned. Be well.

@ACDesignsGarage Ай бұрын

Hahaha thank you, I 100% agree if they would use a smaller hole in the tip where it would be a finer mist, they would be perfect!!!! Thanks for watching!!!

@csorrows 10 күн бұрын

Jesus, that can lays some paint. I was not expecting it to go down so freaking quick.

@ACDesignsGarage 10 күн бұрын

It puts it down like a water hose lol, almost comical lol

@michaelbahta8610 12 күн бұрын

Talk about highly intellectual n simultaneously pro's keep on going . . .

@ACDesignsGarage 11 күн бұрын

Thank you!!!

@johndoe1765 9 күн бұрын

Thanks I learned a lot GOD BLESS and take care until next time.

@ACDesignsGarage 9 күн бұрын

Thank you very much, hope you have a Blessed day!!!!

@johnelliott7375 17 күн бұрын

Very impressive spray coverage for a can, dumps the paint on it

@ACDesignsGarage 16 күн бұрын

She dumps it for sure lol!!!!

@erniekeck5823 18 күн бұрын

That's pretty cool he welded a Sawzall blade to that sheet metal years ago I took a Sawzall blade drilled 2 holes in it screwed it to aluminum drink / bottle holder intended for a bicycle. Then used a hose clamp with the plastic wing nut on it to tightin it on the can so it don't go flying as soon as you hit the button on the saw but be prepared for your arms to itch an tingle after using it cause it will shake your blood around in them veins of yours 😆

@ACDesignsGarage 18 күн бұрын

Man thats awesome idea, i made a video on building one from scratch a few weeks ago, that bottle idea is brilliant!!!

@briananderson4552 20 күн бұрын

Don't go blaming me for your tinkering.....glad ya decided to film and post it tho ....😊

@Ben-rj7xs 29 күн бұрын

I've been waiting for them to come out with a spray can that does this now they need to come out with a kit of tips that can be changed for the spray you want. I think it does a pretty good job for a can

@ACDesignsGarage 29 күн бұрын

That would be awesome if they had different tips!!!!

@doughaven-rf8id 17 күн бұрын

Rust-oleum has a 5 in 1 can that you can dial different spray patterns. Kevin Tetz from Paintucation used that to rattle can a bike tank in one of his videos.

@losgarciasadventures1496 8 күн бұрын

I lay rattle can early in the morning sunrise 6am when its nice and cool, 4 coats at 5 mins between each coat and get mirror finish. I never clear because i change the paint every year for fun, rustoleum stays shiny for 1yr before it begins to fade away.

@ACDesignsGarage 8 күн бұрын

I will say the early morning is the tip for bugs and being cooler!!!

@cesareomendez6794 Ай бұрын

Came out sweet!

@ACDesignsGarage Ай бұрын

Thank you!!!!

@superhawk20002 25 күн бұрын

Waiting for the cut and buff video. I'm ready with the turbo cans and all the supplies to do a foxbody hood and doors.

@ACDesignsGarage 25 күн бұрын

It goes live at 7pm est today, If you use the turbo id hold it back about 15 inches away so you dont get as bad of orange peel as I did, just a lil helpful tip maybe save you some time sanding!!!! Were gonna do clear coat next week!!!

@wowster-so8sx 16 күн бұрын

Those was so cool

@ACDesignsGarage 16 күн бұрын

Thank you!!!!

@elsey1976 17 күн бұрын

You would've gotten way less orange peel if you had placed the paint can in a bucket of hot water for about 10 minutes.

@ACDesignsGarage 17 күн бұрын

I need to try that thanks!!!

@jamesn.4892 26 күн бұрын

I was actually digging the satin red!

@ACDesignsGarage 26 күн бұрын

It did look cool, I painted a body dropped square body suburban flat red once it had a cool look!!!

@USAlivewithGOD 6 күн бұрын

I gotta say it look good but when you spraying it, you should go from one end to end without stopping.

@parkerlockhart7476 29 күн бұрын

Let's see the cut and buff!!!

@wrigleyfield9042 28 күн бұрын

I thoroughly enjoyed your video. All kinds of tips and tricks learned. Would like to see you add a couple layers of clear coat now. I have a question though. If you were to clear coat over the paint at this point (with all of the orange peel), would you have to sand the paint first, or will the clear hide the orange peel? Thanks again for the video. You've made a subscriber out of me.

@ACDesignsGarage 28 күн бұрын

Thank you for watching!! I usually sand it flat with 600 wet after it dried real good and it will lay out pretty slick, a good high solids clear will fill pretty good but you still need to sand it so it will adhere. Yhis weeks video is gonna be wet sand and buffing the pannel, then next week im gonna scuff it then were gonna use the spraymax spray paint 2k clear and make it look like a show car "hopefully " lol. I want to make several lessons so I can help as many people as possible!!!!

@rickyhildebrand114 5 күн бұрын

I have always heard that Rust o Leum contains a "ALlKYD" or fish oil which is not compatible with other paints causing other paints to lift.

@ACDesignsGarage 4 күн бұрын

I think they took out the fish oil is what I heard. I shot some 2k clear over the turbo can this week and buffed it and its SLICK!!! It goes live on the 24th at 8 pm est.

@timothymelius9 28 күн бұрын

Boy I wish I was forty six again. I'm at sixty two years old. I running breath real easy😂😅

@ACDesignsGarage 28 күн бұрын

Hahahahahaha

@alanr4863 16 күн бұрын

Iam 66 I have a 72 Chevy pick up truck that been in my family since 1973

@ACDesignsGarage 16 күн бұрын

Man thats pretty cool!!!

@nancyflower3190 20 күн бұрын

As i always say you paint professionally or pay someone professionally only because you like the talent and or the art but almost never to make a profit. In most cases spray paint is good enough to protect and look to the average person without spending money. Cars lose values over time unless it’s Jay Leno. are or an Italian car

@johnelliott7375 17 күн бұрын

I'm just a little bit older than you are by a good decade so I know what you are saying and get ready for the arthritis soon.

@ACDesignsGarage 16 күн бұрын

Ive had it since I was 35

@jrgoodman4859 13 күн бұрын

When doing body work you always want the sand on a 45 not straight across to keep the sand marks out of your paint job

@PaulHayman-tq5kb 8 күн бұрын

Spray can painting has come a long way to when they first came on the market All these spray with some Prefect should be able to get the factory finnishy

@ACDesignsGarage 4 күн бұрын

I buffed that 2k clear today and it was beautiful, that video will be up on Saturday!!

@calvingrant1052 Ай бұрын

Clear coat would be cool

@THE-Ayala5090 17 күн бұрын

good info

@ACDesignsGarage 17 күн бұрын

Thank you!!!!

@jamesn.4892 26 күн бұрын

I like your paint shaker. Version 2.0 could use a thumb screw style hose clamp.

@ACDesignsGarage 26 күн бұрын

Thanks I was thinkin the same thing!!! Im gonna make a small run of them for my website if anyone wants one, hope to have them up by may 6th.

@rickyhildebrand114 5 күн бұрын

"shake 4000" girl friend approved ?

@ACDesignsGarage 4 күн бұрын

For sure lol

@rudyflores9395 29 күн бұрын

Kool video can't wait for the cut & buff are those slotted mags in the bed ???

@ACDesignsGarage 29 күн бұрын

Yes they are good eye!!!

@rudyflores9395 29 күн бұрын

@@ACDesignsGarage thanks don't get rid of them sir

@craigwatson9736 15 күн бұрын

I will !! 1969 gmc truck I will let you know how it turns out thanks man !

@ACDesignsGarage 3 сағат бұрын

Awesome!!!!

@johnelliott7375 17 күн бұрын

If you store your paper in the clean room you won't have as much cleaning 🧹 to do but the cleaning part is the part that makes it or breaks it.

@ACDesignsGarage 16 күн бұрын

I agree!!!

@MaccTestarossa 12 күн бұрын

Have you done the buff job yet? Waiting on that video

@albertvillarreal7422 13 күн бұрын

I think with a big spray can like that that shoots out a lot you might want to go 8 inches away from it just to give it that perfect paint job

@ACDesignsGarage 13 күн бұрын

Its definitely a learning curve lol

@rtkracht Ай бұрын

Holy sh$t! Please excuse the language but that first pass was simply amazing. Unbelievable actually. Thanks for sharing. Can’t believe a rattle can produced such good results and as always thanks for sharing your skills and expertise. -- clear --

@ACDesignsGarage Ай бұрын

Hahahaha yeah when I put the 2nd coat I was like Crap!!!!! But it needed it to sand down. I sprayed that first coat and it was awesome 👌

@trr5291 12 сағат бұрын

I spray painted a junky old peeling Buick a long time ago. It didn't turn out well. I didn't know what I was doing. I bought dull paint. But sadly, it looked better.

@fordtechlife 21 күн бұрын

I did somthing like this on the front of my foxbody it looked great for about a year then it just went to shit wished it would have lasted longer 🔧🚗👊🇺🇸💪🔥

@ACDesignsGarage 21 күн бұрын

Im gonna do a video on putting 2k clear over the rustoleum, that will make last a bit longer and its in a spray can.

@edgardomatos6923 12 күн бұрын

I'm consider that can . I like to paint lower chasis., qt panel . thanks . oh that 1st coat was great , very clear reflection, 2nd coat orange peel .. but good still .

@ACDesignsGarage 11 күн бұрын

Thank you!! It's tough to make that second coat to lay out slick, I think it dries to fast to flow out.

@craigwatson9736 16 күн бұрын

Got me a 69 gmc c15 gonna try this method out 1 shine coat and put a car cover over it

@ACDesignsGarage 16 күн бұрын

Let me know how it does!!!

@BigpopaKN18761 15 күн бұрын

Hey, thanks man. I’ve been looking for channel that could show me the basics of stuff. I did the bodywork on my truck. Surprise me how Well it looks. I am getting ready to paint but I’m a little unsure on what would be the best primer to set up the paint,so the paint don’t peel off because I use the wrong primer.

@ACDesignsGarage 3 сағат бұрын

If there is alot of bare steel, I'd use an epoxy primer, if it's just paint and body work you can't go wrong with a 2k primer filler. It builds up pretty thick and will help fill in small imperfections.

@BigpopaKN18761 Сағат бұрын

@@ACDesignsGarage thanks man. I have a light coat primer over at the moment. Keep it from rusting but I was planning on sanding that off so that helps me out. I appreciate that.

@southernman5839 12 күн бұрын

Shinny !

@ACDesignsGarage 11 күн бұрын

Thank you!!!

@JohnRoy-xs3fe 21 күн бұрын

Try warming up the paint cans in hot water flows better

@ACDesignsGarage 20 күн бұрын

I got to try that!!!!

@troymcgee7317 27 күн бұрын

hey brother i'm new here i just subscribed what i just seen you do i loved it i would like to see the cut and buff

@ACDesignsGarage 26 күн бұрын

Thank you it will be up this weekend, glad to have you here!!!!

@CRM_0210 Ай бұрын

What would it look like with a 2k clear like spraymax? Like to see that.

@ACDesignsGarage Ай бұрын

I thought about trying that this week instead of color sanding?

@johnelliott7375 17 күн бұрын

You have a small surface to hold the paper it's a chore eI know from doing it and you just said about the width of tape

@phordguy Ай бұрын

Make a recipe saw Brillo pad tool for scuffing it up and cleaning at the same time. Lol

@ACDesignsGarage Ай бұрын

Great idea!!!!

@bobbymoore1859 11 күн бұрын

Let’s do a Clear Coat. Also, how to repair Clear that is coming off

@ACDesignsGarage 11 күн бұрын

Thank you, The clear coat video is loading right now. Thanks for watching!!!

@kcbeerslinger 28 күн бұрын

so what if you waited a few days and then do the second coat? Would it still orange peel? How about doing 1/2 of the bed side cut and buff and half with the clear coat.

@ACDesignsGarage 28 күн бұрын

Thats a great idea, I think im gonna wet sand and buff this week and clear it next week. Ive been thinking that the reason it peeled so bad was the pressure must of dropped a little because it was running out of paint. Usually if you let it tac up and spray with normal cans the second coat looks a good as the first. What ive found that causes peel is low pressure and too much fluid!!

@alanr4863 16 күн бұрын

Yeah sure wood well done

@jaredwike8584 Ай бұрын

Nice video man! Gonna try it on a 65 c-10

@ACDesignsGarage Ай бұрын

Stuffs impressive, im thinking about sanding it this week and spraying that 2k spray paint clear to see how it does.

@blakegoss932 13 күн бұрын

Black, it is

@ashleyrobison2843 28 күн бұрын

Will that cap fit on a regular can an spray the same fan with?

@ACDesignsGarage 28 күн бұрын

It should but it will empty it quick lol, im gonna try it when the can is empty.

@ashleyrobison2843 26 күн бұрын

@@ACDesignsGarage let me know on that cap on a standard can

@johnelliott7375 17 күн бұрын

It's all the talking while you are sanding that has you out of breath.😊

@ACDesignsGarage 16 күн бұрын

Maybe hahahahah

@colesheperd1165 5 күн бұрын

John then don't watch lol he is very informational.

@jesseanthony498 16 күн бұрын

Im in NC 2 where u from at in NC i would like u paint 1 of my classics rides

@johnelliott7375 17 күн бұрын

27:12 Well said could be easier or better but they have their own way

@ACDesignsGarage 16 күн бұрын

So true

@bernandoturner4840 17 күн бұрын

Rad & Mundo..😂

@ACDesignsGarage 17 күн бұрын

Hahahaahaha for sure!!!!

@tonypachanga9636 20 күн бұрын

where I could find that spray h

@ACDesignsGarage 18 күн бұрын

Amazon.com or any big box store in the USA

@patricksandage1550 9 күн бұрын

use tact cloth right b4 paint.

@ACDesignsGarage 9 күн бұрын

I usually do, I was out lol

@transformer889 Ай бұрын

At $53 a can it would get pretty expensive, I would try to buy paint and hardener from the auto paint store

@ACDesignsGarage Ай бұрын

Wow yeah if they were that much here, I'd say NO!! I think there 15.00 here!

@wildwillie1973 16 күн бұрын

Where in NC are you located?

@ThePerfectSeason1972 8 күн бұрын

Cut and Buff !

@davidskipperskip5403 16 күн бұрын

Yes cut into it.

@donaldubdegrove6763 18 күн бұрын

Sell it big can at Wal, mart or Canadian tires at Canada ont

@peterheunz9391 14 күн бұрын

Whats the end song name?

@DiscoBoogieNJ 18 күн бұрын

Looks good, but probably should have held the can further away. The last coat u looked about 4-5 inches away, of course your going to get runs. Great job though.

@ACDesignsGarage 17 күн бұрын

Thank you, yeah im trying to learn this can, its totally different than the old ones!!!!

@tpsyturvy6987 15 күн бұрын

Where do you get those cans?

@ACDesignsGarage 3 сағат бұрын

You can get them on amazon, there are links in the description box below the video, also tractor supply or lowes if your in the states!!!

@ginfizz20 28 күн бұрын

Watch your video--- You were tying to make the spray pattern like your gun makes. You let your hands get down to about 15 inches instead of the 24 inches you decided in your test pattern. The drops would have been finer if you were back further and let the pattern "fly". Interesting trial though. Why is everyone going to Rust-O-leum???

@ACDesignsGarage 26 күн бұрын

Ill try that!, I feel the rustoleum is more compatible with other paints, the krylon paint , ive had trouble with it!!!

@crypto_11 15 күн бұрын

Isn’t it better to remove the whole red paint completely then paint ??

@ACDesignsGarage 15 күн бұрын

As long as its not chipping or peeling its usually good to paint on.

@majorpayne5289 13 күн бұрын

👍

@ACDesignsGarage 13 күн бұрын

Thank you!!!!

@jimmyg5687 27 күн бұрын

I like to see a cut and buff

@ACDesignsGarage 26 күн бұрын

It will be up this weekend!!!

@stevengonyaw1617 Ай бұрын

They claim if you put your spray cans in a bucket of hot water right before you use them they spray much smoother paint 😜

@ACDesignsGarage 28 күн бұрын

I need to try that!!!

@dbrinson9309 14 күн бұрын

Damn i like that

@ACDesignsGarage 13 күн бұрын

Thank you!!!!

@MrKoladge 22 күн бұрын

Sprayed WAY to close with the can. Do yourself a favor and use a regular can of same color paint for doing all your edges. Then blast it with the turbo can light coats….

@ACDesignsGarage 22 күн бұрын

Awesome tip, ill try tha thanks!!! I figured thats why my peel was so bad!!!!