3d Printed Cap Spanner from Thingiverse: www.thingiverse.com/thing:285...
Пікірлер: 17
@fdg8444 ай бұрын
I just bought a used bike with this suspension. many thanks for your video, time, and effort.
@MasterTaters2 жыл бұрын
This model of fork saved my life when i crashed into the side of an suv at 30mph on a schwinn gtx 3 without a helmet, I have a permanent back injury but the quality of the springs and housing of this model literally saved my life. If they were not strong enough to allow me to bounce of the side I would not be here making this comment right now. One of the tubes sheared at the stantion but maintained overall integrity. If the fork was any cheaper I'd be crippled or dead. Take that as a stunning endorsement, subbed.
@crossedhelix86982 жыл бұрын
Wow, that's one heck of a battle story. I'm not sure which is more tough, you or the fork!! I'm glad you made it out ok minus the back issues. I've been using this fork for years, and no matter what I do it just keeps working- its like a tank!
@GregTheGuitarist3 жыл бұрын
Awesome video! I could't find English version of m3010m/m3020 overhaul tutoriale anywhere and now here it is!
@crossedhelix86983 жыл бұрын
Glad I could help!
@rifakahmed63482 жыл бұрын
Same. Thank you
@vinhthinhtieuhoc22152 жыл бұрын
Thanks for sharing this video. I have one like this and often ride mountain down. It's been too long and I don't know how to do with it.
@user-rz3eu5jx5z3 жыл бұрын
Good work
@crossedhelix86983 жыл бұрын
Thank you! Cheers!
@antihorvath2 жыл бұрын
Hi. I have this in a 24" version on my son's bike. I took it apart to clean and greas and also as it was stopping half way on the travel. I figured that removing the rubber spacer solved the problem, now it works perfectly and uses all the travel. Do you think removing the rubber spacer above the plastic spacer will cause any problems? Thank you again
@marianocasagrande22362 жыл бұрын
Buen dia, mi horquilla es el mismo modelo pero tengo que desarmar desde el bulon interno y no se que medida es la cabeza allen, gracias.
@renatoimperatori52892 жыл бұрын
im looking to by this fork for my "old" mtb, do you recommend it? my suspension is beyond destroyed and this seemed like a good deal, and i Haven't found many videos on KZfaq about this specific fork
@crossedhelix86982 жыл бұрын
If it's in good shape and you can get it for a good price, I would definitely recommend it. I've ridden mine for years and have probably a few thousand miles on it. I tried to learn how to dirt jump on it, and have been on some pretty rocky trails. It is a tough, basic fork that works well enough. Having said that, I have really only ridden 2 forks on the trails, this M3020 and the SR XCT. Of the two, the M3020 is lighter weight and has faster rebound, whereas the XCT feels much heavier and has a stronger spring and a slower rebound. I prefer the M3020 in general, but I use the XCT on more gnarly trails because its build a little tougher.
@awaisahmad75862 жыл бұрын
Hi, i have the same suspension on my Gt timberline, The problem i m facing is for first 1 in of the fork it moves freely. And after that the fork spring starts to work, i need help how to fix it, and the preload adjuster is also not working
@rikerrex93232 жыл бұрын
What is the cost of this frock in India?
@crossedhelix86982 жыл бұрын
I'm not sure, but if you want this exact model, it most likely will come from the used market and maybe you can bargain for the price. In the USA similar SR Suntour forks can be had for around $100 USD or 7,500 INR. (But keep in mind lots of bicycle part costs are super inflated as of right now)
@rikerrex93232 жыл бұрын
@@crossedhelix8698 Thank you Sir for this information......But Indian markets have no advanced varieties of cycle.......but l have to have it sooner or later. I have to have it...