A review of the new Honeycomb Aeronautical Bravo Throttle Quadrant
Пікірлер: 206
@jakeperl58572 жыл бұрын
I have no RW flying experience and am the first to admit I'm a fairly crappy pilot in X-Plane at this point. BUT I just got this and am blown away by how it has instantly made me a somewhat less crappy pilot, in no small part due to how much easier it is to finely trim my aircraft (c172) with the trim wheel. Flying straight and level has never so easy, so much so that it kind of feels like cheating, but not being a real pilot I don't really know. Loving this thing so far!
@bmorera83 жыл бұрын
Russ: "There's already plenty of detailed reviews" Me: "... where?!?!" I've only seen unboxings, and a few "reviews" by people who have no business reviewing a flight sim product. Thank you for your detailed review and perspective as a pilot!
@Captain-Palsy2 жыл бұрын
Actually they have the right, the question is the review as comprehensive as possible.
@MichaelBrodie68 Жыл бұрын
A gem of a review thank Russ. I supported the Honeycomb kickstarter and certainty have no regrets. I saw there is third party software available to turn the button pulse control of the trim wheel into an axis. This allows a change in responsiveness to one's liking, but obviously its not going to affect the physical resistance issue. The above did make me wonder whether that software (need to find it's name) could be used to turn reversers into axes. That would then offer gradution. Not only did I greatly enjoy the video, I found the comments section useful as well. My next point to research is whether I could use my old joystick as a tiller for taxiing while having the yoke and throttle assigned? - the issue being I don't have rudder pedals, and a button on the joystic could be used for braking. Many thanks and a definite sub from me!
@JSAnstock2 жыл бұрын
Thanks for the review of this. Had to watch twice because when you said you were going to give your impression I spent the next ten minutes replaying Airplane in my head
@tomb8430 Жыл бұрын
I have this unit... 5 things I can give constructive criticism about: 1) The rotating knobs for the left side selector could have been better quality, with at least a white line so you could see that was currently selected. That, or an LED above each function to show which was currently selected. 2) The push buttons having inter changeable covers so you could assign the buttons the way you want them. 3) The toggle switches having lights on them so you know when they are active. 4) For the commercial levers, make the white knobs bigger and have the TO/GA switch on the side as it is in commercial aircraft. 5) Detents for the flap and IAS selector levers would have been nice.
@rbarlow Жыл бұрын
Good points but I fly a lot in VR so the LEDs wouldn't help me that much since I have to work mostly by feel.. Also, as a high hour B737 pilot, I can say that the TOGA button is close to where it is on all real 737s made after the B737-200 Advanced (1980 vintage). The side button is the auto throttle disconnect button so they have it right for B737s on the Alpha. It was hard for guys who switched from the early model 737s to the newer models because when doing a go around they would instinctively hit the "old" TOGA (side)button and disconnect the auto throttles and NOT start the auto go around as expected. After a few seconds of confusion things usually went south fast after that and I even saw a few guys bust check rides because of it.
@rayericphillips391610 ай бұрын
Most videos are on a windows PC but very little on a Mac. I have both Honeycombs and x plane 11 and 12. Total beginner !!!!! Great video
@blave5493 жыл бұрын
Great review, and you just amplified (yet again) my anxiousness to get mine (on order from Adorama). I appreciate your RL pilot perspective, and the fact that you like this product is quite the endorsement. I'm also impressed/surprised that you have enough passion for aviation to do this in your spare time, AFTER you climb out/walk off the real deal. Thanks! I used to fly planes/helis IRL but for various reasons don't anymore, so I get my ya-yas from FS and DCS....
@rbarlow3 жыл бұрын
What kind of stuff did you fly?
@blave5493 жыл бұрын
@@rbarlow C-172, SR-20, PC-12 (only twice 8^( ), Cessna 421, a smattering of other airplanes, S-300C/CB, R-22, R-44, and some turbine helis a few times. All just for fun.
@darryljude553 жыл бұрын
Thx Russ. I really trust your reviews and expertise. In line waiting for my bravo.
@rbarlow3 жыл бұрын
I appreciate your feedback
@brycejeannotte76993 жыл бұрын
Thanks for the review Russ. I hope to get one of these throttles when they become generally available next year. I like the idea of mounting a display on both the yoke and on the throttle.
@rbarlow3 жыл бұрын
Watch my channel.... I will try that soon. I have the second monitor and bracket.
@kevinblythe21923 жыл бұрын
Thanks for your initial review on the Bravo Throttle Quadrant Russ. Honeycomb definitely deliver excellent products for the price point. Many other flight sim hardware manufacturers stopped innovating about 15 years ago and it shows.
@rbarlow3 жыл бұрын
I definitely agree about Honeycomb and their positive effect on Simming
@captainbob27273 жыл бұрын
Excellent review Russ, You hit the nail right on the head. I liked how in detail you went with this video.
@rbarlow3 жыл бұрын
Been watching your project videos. Still offering a free license to Air Manager if you think you might use it in your project.
@captainbob27273 жыл бұрын
@@rbarlow Thank you Russ! That would be excellent, I think it would be a great tool.
@heinzpilot3 жыл бұрын
I ordered onw last week. On back order until July. I'm also a real world pilot with over 35 years in the industry. Can't wait to get it.
@rbarlow3 жыл бұрын
Nicki at Honeyvomb is a victim of his own success.... can’t keep in stock
@fossve3 жыл бұрын
Finally a 738 configuration. Good review👌🏻🛫
@rbarlow3 жыл бұрын
Thanks for your kind feedback.
@monochromeintechnicolor50362 жыл бұрын
Well done. Your review pushed me over the edge and I've decided to go with the Bravo. Thank you.
@Zelig2Cents3 жыл бұрын
My actual goal is NOT to be an expert flight simmer, but rather to get my private pilot's certificate and to get my instrument & commercial ratings. Possibly even to get to CFI. So, all dollars spent on flight sim equipment are a two-edged sword. Yes, they help me build proficiency, but they are also money taken away from training in the actual "thing". So, barring an unlimited budget... it's a balancing act. My sense has been that there is no company nor product that better hits that balance between dollars and performance than Honeycomb, that is, in service of actually flying. Your reviews only serve to confirm that, so thank you VERY much Russ!! You have a great speaking style and you deliver the most important information and in a very well organized fashion. As an aside, I hope Honeycomb's success continues to build. Not only do they deserve it, but for self-serving reasons, I can easily see moving up to their step-up products. For example, their longterm goals include a yoke in the sub $500 category... with force feedback!!! It will hopefully also close the gap between the Alpha Yoke and the Yoko. If they pull that off and if they do similarly with step-ups to Bravo & Charlie, they might well capture 90% of the market share. One more aside: I grew up about 3 or 3.5 hours east of you in Athens. It's an extreme long shot that I'd have the time, but I will be visiting my parents there from Nov 17th to the 22nd and if there were any way to meet up with you for an hour or so of socializing it would be my pleasure. It's my father's fault that I have this bug. He only ever got his private pilot's certificate, but I still have very fond memories of the original Ohio University airport at the east end of town and I still remember my father taking me to the airport to go up for an hour or so. I recall that as we would get near the airport, that the airport ambience & the smell of AVGAS, that the hair would stand up on my arm with excitement at the prospect of getting up in the air. What an amazing feeling it is to fly!! Thanks again Russ!
@rbarlow3 жыл бұрын
We are visiting my son in VA the weekend before Thanksgiving when you are in the area. Perhaps we could talk in zoom or facetime some other time. A sim cannot teach someone to fly but it can really reduce the cost of in the airplane instruction. BTW I attended OSU for Aero Engineering and flight instructed at University Airport. Good Luck and safe travels.
@Zelig2Cents3 жыл бұрын
@@rbarlow I hope you all have a wonderful time with your son Russ. Yes a Zoom call sounds great. I'm hoping to find any old aviation related photos my father has taken and convert them to digital photos. Maybe we'll even find his old E6B and logbook. He's 95 & my mom is 91 so I'm very much looking forward to spending this time with them. Stay safe, whether on the road or in the air!
@What_If_We_Tried3 жыл бұрын
Excellent video, especially from your perspective as a pro-pilot, and a timely find for me as I have been thinking about the Honeycomb yoke and throttle for awhile now.
@Polymer3 жыл бұрын
@11:14 Russ (in this review): "One of the problems with the FLAPS...there's no DETENTS..." Russ (a few weeks later): designs and makes 3D printed DETENTS, and provides the files for FREE: kzfaq.info/get/bejne/eZuIm8Klq73Xhp8.html Me: "Russ, you are a CHAMPION!!!" 👍👍👍
@tangotango256 Жыл бұрын
Have both love them ....Had to fix it all from scratch because i downloaded the led fix for the Bravo without saving my Community Folder (using Steam) Don't spend enough time doing this to be proficient winter is coming to get immersed ....I can certainly tell you've got lots of seat time watching you configure operate and land ...Subscribed looking forward to your words of wisdom and skills
@JDRichard Жыл бұрын
Great flight and superb Landing the 737
@marshallweisberg56972 жыл бұрын
On the screen it looks very realistic. Good job!
@tjohara947 Жыл бұрын
Thanks again Russ for your videos reviewing products and tutorials. They are extremely valuable. As a pilot, I use my sim to gain skills, and build muscle and cognitive memory that will help me to be a better pilot when I am actually flying. I gave my comment on your review for the Alpha. My comment for the Bravo is that it is not realistic as a training device. It seems as though the product people wanted to cram as many switches as possible on their controls. In the real C172/182, things are quite different as you know. I don't own one but I noticed when you trim, you moved the trim wheel quite a lot to get small changes. In the real airplane, you move the wheel in small increments. I bought a Switcho Trim Panel from Virtual Fly which is more realistic for pilots training for their FAA License. Perhaps you can give me some feedback if you have a little time. Thank you.
@DrTom19462 жыл бұрын
As always Russ, 'you're the man' appreciated....
@jetfuelboy2 жыл бұрын
Very detailed video Russ, I have purchased the Bravo on your recommendations. Looking forward to the future development of drivers to support more MSFS 2020 aircraft and your 3d printed flap gates.
@LostInSpace1753 жыл бұрын
Super stoked to get my hands on this and the yoke. im getting it after i pass my commercial checkride..itll be my gift to myself lol
@RyanVJones2 жыл бұрын
Thank you for the demo
@Mango.Bandicoot3 жыл бұрын
This has been just as hard to find lately at retail price as a PS5 has been. Luckily, I somehow snagged both today from actual retailers. Really excited to get this. I got my Alpha from UPS today and after only one flight I am in love with it. So much better than my Saitek. Great video review, really looking forward to my shipment Thursday.
@therealiblack163 жыл бұрын
Where did you find yours?? I’m trying to get a bravo quadrant!
@Mango.Bandicoot3 жыл бұрын
@@therealiblack16 I just happened to check Marv Golden and it was in stock. I ordered it immediately. I'm told now it's back ordered again but the honeycomb website says it's due back before April so I'd keep checking various stores and DO NOT pay scalpers. Sign up for email alerts where you can for when it comes back in stock.
@solgoode13 жыл бұрын
This is really a well done review. Can't wait to get this throttle to go with the alpha yoke. The yoke is such high quality. I don't regret that purchase at all. I expect I'll feel the same about the Bravo throttle.
@rbarlow3 жыл бұрын
A good value IMHO
@leerose94363 жыл бұрын
Really enjoyable ! Thanks so much ! Greetings from the UK 👍🇬🇧🇺🇸🙏🏻
@rbarlow3 жыл бұрын
Thanks for watching!
@donc97513 жыл бұрын
Thanks for posting this review! I subscribed to see more of your videos. I just ordered both the throttle quadrant and yoke to use with MSFS2020 and X Plane 11. Haven't been flying much for awhile and had an old CH Fighterstick joystick I used in Il2 Sturmovik a WW2 sim but that stick just doesn't cut it with MSFS. Really appreciated hearing your thoughts on it both as from a Pilot and also in comparison to the Virtual Fly TQ6, and that's a big gap to fill $ wize! I think these will work nicely for me, as long as they'll fit together at my desk!
@pedrosantanacouto3 жыл бұрын
Thank you for the review. What i was looking for.
@Graffenwehr3 жыл бұрын
Great review - very useful. I'll purchase one today!
@rbarlow3 жыл бұрын
Be patient. May take a while to get it but worth the wait.
@JayWeldy3 жыл бұрын
Nice video and narration, thanks very much.
@houstonb96462 жыл бұрын
Got the dust cover for it too 👍🏾
@gaigesmith96742 ай бұрын
Does the trim wheel spin when using the trim on the yoke? I thought it did but can’t get it to do it anymore on mine.
@jefferybauman93933 жыл бұрын
AWWWTHUMB VIDEOS EXACTLY THE SET UP I WANT WITH THE FLAP MOD PLEASE AND THANK YOU FOR ALL THE INFORMATION
@airwipe16393 жыл бұрын
I'm eager to buy it but its just, massive. I can't see having a yoke, throttle, plus all the other PC stuff on one desk between simming and gaming.
@bertiesworld3 жыл бұрын
I hadn't realised how big it is. I don't think the wife will be pleased......
@tombmaster9723 жыл бұрын
simple resolution: forget other games and use only your flightsim for now on
@michaeloberly61293 жыл бұрын
The only real drawback for this system. You need a very specialized setup to take best advantage. It's really a pain to use my keyboard when I have it all set up. Still, a beautiful throttle and yoke.
@CenterofAviation Жыл бұрын
@@tombmaster972 That’s what I did and I didn’t regret it!
@jimsimpson23933 жыл бұрын
Hi Russ: I am your target audience. A beginner with flight sims researching the hardware. You helped me choose the Honeycomb Yoke and Throttle Quadrant. I will be using my HTC Vive Pro headset and wanted to be sure not to overspend on hardware. Your review also helped me feel confident I am not overbuying as a rookie. Thanks. I really appreciate your calm demeanor describing your reactions to the items your are reviewing. It makes paying attention much more relaxing. I think I recognized the Saitek rudder control in one of your videos. Would you recommend that product to fill out the base set of sim controls?
@rbarlow3 жыл бұрын
I think I would get a cheap used rudder on eBay or craigslist for less than $100 and wait for the Honeycomb Charlie. May be a year but the Saitek or CH pedals cane get you started at a reasonable price. Thrust master has a cheap set of pedals in plastic but the are about $120 and are close together and look flimsy. I really am not qualified to pass judgement on them so check online for reviews. Good luck.
@mogumogu36863 жыл бұрын
Excellent review Sir! 👍👍
3 жыл бұрын
Great review. Really very interesting Throttle Quadrant. Greetings. Aleš 👍
@judassson3 жыл бұрын
Finally a proper review
@renehebert5523 жыл бұрын
Thanks for a most excellent review! Maybe add a couple of nylon washers to the trim wheel to increase friction?
@rbarlow3 жыл бұрын
Thanks, I’ll take a look at that. I don’t know exactly how that is connected as I don’t see a bolt external from the trim wheel to tighten or loosen to remove in place of washer. Right now it pretty much spins like a wheel on an axle.
@Voltomess2 жыл бұрын
Idk if it's worth for a VR, where you can't see wnything how you're going to operate that autopilot panel above having VR on?
@drivers993 жыл бұрын
Problem for me is it’s impossible to get the CPU, video card, and throttle control I want in order to play Flight Sim 2020 in the way I’d like. Maybe in 6 months. I’ll like this video now and save it for when I can get one.
@rbarlow3 жыл бұрын
Feel free to ask questions when you get to the point of setting it up. Good luck
@Quotenwagnerianer3 жыл бұрын
I'm torn on this. I see they were going for a quadrant of similar size of the Yoke, so that they could use the same mounting base. But to me only 58% of the real size handles is too small for my tastes. I would expect at least 80%.
@rbarlow3 жыл бұрын
Actually about 60% scale is not too bad. The General Aviation knobs are much closer. It is made for portability too. To get to full scale airliner size it would be a pretty big unit. It is a compromise and while not high fidelity it is pretty good for the price. Compared to the flimsy Logitech/Saitek Quadrant (which would require two to get six axis) it is a no brainer. If you want a rugged, realistic sized, general aviation quadrant with no frills(just levers no buttons at all) you can have the Virtual Fly TQ-6 for about $859-900. IMHO I agree with my wife that size really doesn’t matter😀
@Quotenwagnerianer3 жыл бұрын
@@rbarlow Well in that case, I'll value your input, since you do have real world experience on that airframe. And if you say it isn't too bad at that size, then I guess I can shelve my reservations. I did have the Saitek Quadrant, so I know the point of reference. And the Yoke is excellent (I had to return mine for a replacement because one of the button wasn't functioning out of the box). So I expect nothing less of good quality from the Quadrant.
@harpoon_bakery1623 жыл бұрын
I agree. It's a tough call on this. I'm not giving up on it until I find out if someone could "mod" new handles that are bigger. EDIT: ok thanks Ambrose
@bankangle97423 жыл бұрын
Great review. Good job buddy. I am waiting for mine to come which I ordered in summer.
@rbarlow3 жыл бұрын
Yes Honeycomb is good at designing cool things but not so good at delivering them quickly. Should have it by December.
@bankangle97423 жыл бұрын
@@rbarlow agreed 😅👍🏻
@feildcar45783 жыл бұрын
I have their yoke and really wish I would have pre ordered the throttle quadrant while they were still available they are still sold out.
@rbarlow3 жыл бұрын
COVID + FS2020 = shortage of virtually all sim hardware(especially Honetcomb)
@ctc2986 Жыл бұрын
What kind of rudder pedals are you using?
@dabneyoffermein5953 жыл бұрын
I wonder if there will be a name-plate coming out for this for the description for the top part right above the black switches, so that all black switches have a removable vertically placed label? Boy, it would sure be nice. I can see it now, everyone with awful printed paper labels littering the top of the unit above the black switches and making this nice beast looked hacked.
@marcdraco21893 жыл бұрын
Once again, this gives me the horrible feeling that it's a case of visual excellence over physical details (weak detents, poor tension on the trims). There's no doubt that Honeycomb is trying to position itself as the "go to" for simmers but I worry about the long-term viability for what I've seen. Oh, and I've already bought the yoke and await delivery of bravo - so I've put my own money where my complaints and observations are. I just wish there were more people out there who were prepared to look beyond Honeycomb's beautiful design - and a little closer. "All that glitters is not gold" - and it's the best we got for now. Nice to see you noted there is no potentiometer in the reverse thrust (didn't think they would be). Another thing I noticed is that for all we have loads of switches (on both devices) there's no way to insert some labels so we know what the devil they all do!
@Djeez23 жыл бұрын
Tip for the labels: glue a metal (ferro) strip below the buttons. Print labels for a particular aircraft on magnetic paper strips. Attach a metal plate in the box where you keep the handles and store unused button strips there. When you change aircraft, get the right handles out and the strip for that aircraft and stick it on the throttle quadrant.
@marcdraco21893 жыл бұрын
@@Djeez2 Genuinely never thought of that. Pity Honeycomb didn't but thanks, that's something I can rectify now! Brilliant idea dude!
@blave5493 жыл бұрын
Dude... It's $250. Show me a better setup for 2 or even 3x that price.
@SorMa103 жыл бұрын
I'm a happy owner of the alpha yoke but I'm not sure I'll buy this one. In my opinion there are too many compromises. I understand the goal was having a quadrant for almost all kind of planes but in that way each possible setup has something missing. As a boeing/airbus lover, I would have preferred less ap buttons/annunciators and more options on the axis (such as speedbreak armed position or push/pull, a/t disengage, flaps with positions and a full reverse thrust axis). And I don't like the mounting base, the same used for the alpha: I have a thick table and the clamps are just too short while the suction system has removed the paint from the table and is unusable.
@rbarlow3 жыл бұрын
Well it sounds like you may need a high end dedicated airliner quadrant. Of course the Airbus and Boeing are quite different. I think the Bravo does an excellent job filling a wide variety of needs at an affordable cost. Many folks like the variety of airliners and GA aircraft so this is a great choice for them. Thanks for your comments.
@SorMa103 жыл бұрын
@@rbarlow Thanks for your reply. It makes sense what you're saying. No, I am not looking fo high end stuff, I am just not fully convinced by this bravo as I was for the alpha, maybe my expectations were too high (and not realistic). In the end I could buy it. I'am also looking at the thrustmaster TCA airbus, because on that one you can remove the detent zones and move the throttle freely. In any case, both items are out of stock so for the moment no decisions :)
@Mr_Spock5123 жыл бұрын
Excellent review!
@rbarlow3 жыл бұрын
Thanks for watching
@PeterNGloor3 ай бұрын
ok, the trim wheel is too loose. No problem with me. But it just won't work with MSFS. I assigned the elev.trim according to the only functions available, but the trim wheel does not operate elev.trim in the plane. Only the electric trim on the yoke works.
@rbarlow3 ай бұрын
I agree but it does work just poorly. You cannot assign an axis to it so you have to assign elev nos up and elev nose down to the two rotation directions. It is like an encoder knob. Unfortunately the inputs are too slow requiring a lot of rotation to detect a change. I suggest adding a stand alone trim wheel that uses a potentiometer and feels quite realistic. Something like this: gear-falcon.com/products/stand-alone-elevator-trim-v4 It even has 8 spare digital pins you can attach additional buttons and switches too if you like.
@PeterNGloor3 ай бұрын
@@rbarlow now this is not good news to me, as I cannot get this gadget in Europe, and moreover, Honeycomb has done a lousy job of not integrating a potentiometer-controlled wheel in an otherwise good product. As they are currently off the air and maybe going to close down, I take it there is no solution out there. I have used good trim wheels in "real" sim cockpits, and they worked just fine. Thanks for your help.
@tbone40X3 жыл бұрын
Thanks for the review!
@rbarlow3 жыл бұрын
My pleasure.
@rothgartheviking8583 жыл бұрын
best review i have seen.
@winddealer13 жыл бұрын
Would respect your thoughts regarding the "potential" utility of the Bravo Encoder dial and associated Quadrant buttons to complement, augment or mitigate the need for the Knobster. What compelling physical or logical limitations are observable regarding the Bravo Encoder over the Knobster. Appreciate your honest and credible review. Gratefully.
@rbarlow3 жыл бұрын
Yes in some regards the built in encoder may be a step backward for those using Knobster. First it requires rotating the selector knob to select a mode which seems less intuitive that just touching it on screen as with Knobster. It reminds me of the Saitek multi-panel operation.It still beats using a mouse and keyboard for inputs. Second, the Knobster has a much better Elma encoder that the one used in Bravo. Bravo is a reasonable trade off between quality and price. I am anxious to try the quadrant in VR to see how easily I can stay oriented using tactile feedback only to navigate the buttons. I am thinking the autopilkot buttons and sellector may be pretty easily memorized and used while "under the hood". Finally, some people may elect for a panel monitor that is not a touchscreen displaying Air Manager instruments in which case the Bravo buttons would be a useful improvement over mouse and keyboard inputs.
@winddealer13 жыл бұрын
@@rbarlow Thanks Russ, I've noticed in multiscreen configurations that MSFS 2020 only honors Touch when present on the Touch Screen Display (Acer 28" - which makes sense). However, if MSFS 2020 is instead running in a window on my larger 32" non-touch screen and a subordinate window from MSFS 2020 is moved into the Acer Touch Screen monitor, TOUCH does not operate in that secondary window context. Ideally, my 32" (non-touch) screen should be used for primary "viewing" and the 28" Acer Touch Monitor would be used for tactile operations such as NAV/RADIO/AP. Is there a workaround or setting that I have overlooked? Gratefully.
@sascenturion3 жыл бұрын
Great review ...thanks. Your my "go to reviewer" for flight sim hardware/software and of course hardware for home sim setup development 😀 . Other flight sim utubers have mentioned the throttle " detent" is light but ok ..i have the feeling your correct though ..not much if any detent is there . I would look forward to see what you come up with in regards to a 3D printed " flaps notch " 😀👍 Perhaps you could do a review of the Reverb G2 when it arrives. ..purely from a flight sim perspective..😊 Great review ..relaxed and informative ...Thanks Ps. At 14.05 circa you said "...yoke" did you not mean "...throttle" 😬
@rbarlow3 жыл бұрын
Yes “throttle” is correct, noticed it during final review but just not enough time to make it perfect. I definitely will review the G2. Thanks vor the Feedback.
@GamingWithFusion3 жыл бұрын
Everything is out of stock so I have to wait but it will be amazing once I can get my hands on both the yoke and throttle quadrant.
@rbarlow3 жыл бұрын
Yeah I think covid has increased demand on all gaming hardware.
@GamingWithFusion3 жыл бұрын
COVID-19 plus the release of Microsoft Flight Simulator definitely made flight sim hardware much harder to get. Demand far outways the volume that products can be produced during COVID.
@pilothound15823 жыл бұрын
Awesome review 🛩👍
@rbarlow3 жыл бұрын
Glad you liked it
@beyonddeath1233 жыл бұрын
I dont see a reason I couldnt 3d print full size handles assuming you dont want to use all 6 axis simultaniously... could probably also make a spring loaded gate for the flaps. I'll probably do exactly this if I ever get my bravo quadrant :P Turns out its about as hard to get as a 3080 or 6800xt
@rbarlow3 жыл бұрын
Let me know what you come up with. I would like to do the similar project but I’m not sure how long it will take me to get around to it.
@Dennis-xs9cn3 жыл бұрын
Nice video thankyou.
@PamOrl3 жыл бұрын
Great review. I’m getting ready to set up for FS 2020 after not simming for a few years. Your review is very helpful. I’m wondering how VR goggles work when using an “analog” setup like this. How can you manipulate buttons/switches/handles while wearing the goggles?
@rbarlow3 жыл бұрын
This is indeed an issue.In the military when checking out on a new aircraft we used to do a blind cockpit check where we had to be able to find all the knobs and switches while wearing a blindfold. Once you get your hands on the throttle you can kind of find everything from memory and feel but what we really need is hand tracking and pass through video to be able to really fly easily in VR. It’s just that the immersion and realism is just so compelling it’s worth dealing with the limitations that still exist.
@hipez11923 жыл бұрын
Nice review Thanks
@rbarlow3 жыл бұрын
Thanks Sir!
@Buddy3083 жыл бұрын
So, the tension adjustment for the throttle axes does not affect the tension on the trim wheel?
@rbarlow3 жыл бұрын
Yes and it moves quite freely which is not very realistic.
@ccruzsanta3 жыл бұрын
Hi Mr. Russ can you please describe the specs of your computer and what software you have installed for flight sim.
@greathorton3 жыл бұрын
I have a set of Saitek yoke already, can the honeycomb throttle still work with MSFS2020 if I will go to buy this set only, no honeycomb yoke?
@rbarlow3 жыл бұрын
Sure. The Yoke and Throttle are independent so you can mix the Saitek Yoke with the Honeycomb throttle quadrant. The honeycomb Alpha Yoke is much better than the Saitek yoke though.
@BonanzaPilot3 жыл бұрын
Rarer than a 3080
@mikem.20783 жыл бұрын
~ 13:30 You are the second reviewer to state that the reverse handles are full on or full off and no in-between. Darn. As an amateur simmer I like to cheat a little and just use reverse for my convenience. I guess I can just assign extra joystick buttons for that purpose and still use those regular reverse levers on landings (?) The hdg / alt / vs / etc buttons along with the corresponding knob seem like a good idea, as I always have trouble mid-flight using my mouse to adjust altitude -- bounces knock my mouse pointer off constantly and I don't know how others can adjust a lever 100 degrees or so while turning and bouncing and moves your mouse off the virtual knob on the screen.
@rbarlow3 жыл бұрын
In real life we seldom used full reverse on landing. We were required by the flight manual to use them but we often just deployed them at idle on a long runway since after a smooth landing the loud shaking could cause passenger to rate a greaser as a bad landing. On a short icy runway was another story.
@kittealand3 жыл бұрын
I guess you can do what I do on my two unit Saitek Throttle set up, ie assign the 4th and 5th levers as reverse axis. Of course it's not realistic that you have to change grip to access the reverse levers, but at least it's not just on/off then.
@mikem.20783 жыл бұрын
@@kittealand Yes it seems there are six lever slots on the Bravo. If my math is correct one for speed brake, two for throttle, one for flaps, and I'm guessing one for Reverse Thrust up & down, with one still left over. Not sure why you mentioned two levers for reversers. Still, not as authentic, but I guess would work... Thanks.
@mikem.20783 жыл бұрын
@@rbarlow Interesting. As an amateur simmer I've found that really I've hardly ever really needed the reversers -- just leaves me down closer to the end of runways when not using them. But don't think I've truly ever needed them, at least not when flying properly that is. I'm guessing the flight sims (x plane) in that capacity are accurate to the real world, then. Interesting you guys would use reversers only around idle -- kind of a smack in the face to the manual?
@kittealand3 жыл бұрын
@@mikem.2078 You have one reverser for each engine (unless you are driving an Airbus 380). Then I'd recommend FSUIPC to set it up so that when you load a certain aircraft you can have a profile that is assigned to the aircraft automatically loaded. Typically you would create a profile called eg "four engined jet", "singe prop, or "dual prop" etc. In the profile you specify which lever should perform what action, so you may have a profile where eg for a "four engined jet" lever 1 is speed brake, lever 2-5 are throttles and lever 6 is flaps. This feature alone makes FSUIPC worth buying for me.
@harpoon_bakery1623 жыл бұрын
wow, only 58% full scale. hard to fathom why so small. Great that you are going to try something for the gates on the flaps. also, if you find out any larger mod'd throttle attachments, let us know !!! Great vid as always. Sounds like they should have involved you in the design!! ;)
@rbarlow3 жыл бұрын
Actually about 60% scale is not too bad. The General Aviation knobs are much closer. It is made for portability too. To get to full scale airliner size it would be pretty big. It is a compromise and while not high fidelity it is pretty good for the price.
@harpoon_bakery1623 жыл бұрын
@@rbarlow thanks Russ. IF on a scale of 1 to 5, 5 being the best. What is this Bravo fidelity vs. the Go-Flight GF-TQ6 Advanced fidelity?
@thirdshifter823 жыл бұрын
my detent is on point.
@rbarlow3 жыл бұрын
Great
@commanderpip83503 жыл бұрын
I don't understand your detent issue because another reviewer showed the detent on the levers and flaps. Pilot Emilie did a review and there were clearly detents on the levers and flaps and she showed that. Could it be the tensioner not set tighter?
@rbarlow3 жыл бұрын
No the detent is just very soft. It is hard not to accidentally go past it without realizing it. If I pull the Airline style throttles to the detent and the actuate the revers levers I usually pull the levers beyond the detent.I suppose if you set the throttle friction to almost zero you might notice it more but then IMHO the throttle wouldn’t feel realistic. It is possible to set an action when below the detent, like reverse thrust, so it would be nice to feel it more. On the Virtual Fly TQ-6 the detent is very noticeable and take a good pull to get past it.that throttle also has revers thrust modulation below the detent not just an on/off switch. Of course it is over 3 times the price and has no extra functions beyond the levers. It. y not be an issue for you that was just my observation. I may 3D print a little plug to limit the throttle movement at the detent when desired.
@whtfsh7652 жыл бұрын
I've flown numerous Boeing jets in real life, so I'm picky about realism. I have a couple of questions. 1) Since there are no detents or gates, are you looking at the aircraft flap position indicator to judge where to position the handle in order to get the flap setting you want? 2) Is there an autothrottle disconnect button? I noticed that the TOGA switch is where the disconnect buttons should be. It appears that you were able to arm the speedbrakes using the handle. Did you lift the handle as in the actual aircraft or is there simple a detent position that accomplishes that task? Thanks.
@rbarlow2 жыл бұрын
First look at this video for the flap issue I made a fix kzfaq.info/get/bejne/eZuIm8Klq73Xhp8.html As for the A/P disconnect button you can reassign any buttons as you wish. Actually I flew B737-200 Basics that had the TOGA on the side where the later. -200 ADV had the disconnect. At first we were flying both models and had sims of both types. I saw many a guy accidentally disconnect the A/P during a go around thinking he was hitting the toga on the ADV….thing rapidly go downhill from there. Finally I by habit moved the SB handle to a slightly forward position but there is no arm detent. After you see my flap detents it could be done.of course the autos Poulet works in the sim but obviously the Bravo handle has no motor so it stays put.
@polaarj3 жыл бұрын
What is your FPS. Video is really good
@rbarlow3 жыл бұрын
About 45 FPS
@MrOkieChef3 жыл бұрын
Sign me up for your 3D printed flap detent option should it ever come to fruition
@rbarlow3 жыл бұрын
Please go to the website flapmodster.com yeah enter your information into the form under show your support. That way you will be on the mailing list and informed of progress
@joeallen28433 жыл бұрын
Hi Russ do you think it would be a good idea to print a 3D part that will allow one to pull out landing gear handle before release it down for the gear to drop? Or can you perhaps mention this to honeycomb?
@rbarlow3 жыл бұрын
Yes but the handle is pretty stiff and not easily accidentally lowered or raised. Still it would be better as you say.
@JenniferinIllinois3 жыл бұрын
I transitioned from a Saitke yoke to an Alpha and can't wait to get the opportunity to transition from the Saitek throttles to a Bravo (hopefully early next year). How is the trim response on the Bravo in MSFS?
@rbarlow3 жыл бұрын
Not a big fan of the trim on FS2020. Not sure if the inputs are fairly large but slow but I seem to no see it a first and then over trim. Need to look into it. It’s seems to take a lot of wheel rotations to get much trim so it seems more precise than the yoke buttons. Something about the rate of trimming seems off.but I don’t think it is the Bravo.
@JenniferinIllinois3 жыл бұрын
@@rbarlow Thank you for your input. The trim is definitely an issue in FS2020. I've gotten a, little better at using it but for the most part I'm just using the autopilot a lot. 😉
@paulschneider42343 жыл бұрын
Russ, Where can i find that pedestal mount that you ues for Bravo Throttle?
@NikolasEdrich3 жыл бұрын
It looks like he made it himself
@rbarlow3 жыл бұрын
Yup...all made with 2 X 4s and 3/4 birch plywood
@jamesleicher3 жыл бұрын
Very disappointed, You did not give the Airport temp before landing, :p
@VictorLopez-bo7nc3 жыл бұрын
Do you think they can add the reverse modulation via drivers? or is it "hardwired" ?
@rbarlow3 жыл бұрын
No that is just an on off switch. It could be done on XP using part of the throttle axis as the reverse range like I did on the Saitek. Otherwise it would take four additional axes which is not practical on a unit this size and price. I think it is a good compromise in that the levers operate physically like a real B737 See this video Saitek Quadrant Detent Mod kzfaq.info/get/bejne/gdWPfbqVzODFqWg.html
@lking19833 жыл бұрын
Thanks for the review. I just ordered this arriving in the next few days. It looks fantastic. My main worry is the trim wheel as I've heard others say its too loose. I'll be using mine in a motion simulator with vibration & I worry its going to move on its own as I move about & it vibrates. Do you think the standard tension on it is enough to stop it moving? If not i will be looking to create a mod to put a bit more tension on it
@rbarlow3 жыл бұрын
I have heard people have been using some kind of rubber washers or something to make it fit tighter and I haven’t gotten around to that yet. I do think it might move with the vibration of motion platform .
@lking19833 жыл бұрын
Thats what I thought. OK thanks. Sounds like something I can quickly knock up & 3d print. Or maybe get my box of tap washers out
@lking19833 жыл бұрын
@@rbarlow My bravo throttle arrived today & I agree the trim wheel is a bit too loose. I made a quick fix for this which was a large washer made out of a piece of neoprene foam I cut into a circle ~2mm thick. I cut a slit in it & slipped it in behind the wheel. It took me a few tries with thickness for the right resistance but it feels much better now.
@stephengravning94783 жыл бұрын
it's nice that you can feather the prop in Xplane, because I can't in Microsoft Flight Simulator 2020. How stupid is that? Been fighting with it for hours, but apparently it's not possible.
@rbarlow3 жыл бұрын
Hi… I hadn’t tried that yet in MSFS. I’m going to have to add that to my list of things that need to be fixed. Thanks for pointing it out.
@tommykuch82753 жыл бұрын
Where can i buy honeycomb flight yoke and quadrant? I been placed order mine since August 12 this year and still receive a back order , and they already collected my money first day i placed order. Im tired to to wait
@rbarlow3 жыл бұрын
Did you order from Honeycomb directly or somewhere else? I think Honeycomb quadrants that were pre-ordered will ship in December. The AlphaYoke has been available but the sell fast. Two reasons. More people at home gaming more due to Covid-19 and Flight Sim 2020 attracting many new people to the hobby. Honeycomb is a new company so I think they were reluctant to sink lots of money into unsold inventory but as their success grows and all the early adopters get units this may change. I know it is frustrating.
@tommykuch82753 жыл бұрын
@@rbarlow No I did not order direct from honeycomb. I ordered from some other company in Florida, But i still can cancel and get full refund . I been told last week the flight yoke they might receive in 2-3 week and the quadrant it will take 6-8 week. I tried to place order from Honeycomb but seem website not allow me to placed order
@SIMRIG4123 жыл бұрын
@@tommykuch8275 can always over pay on eBay
@CascadiaAviation3 жыл бұрын
If you don't want to use the suction option what can you do? I already removed the plastic from the suction cup.
@rbarlow3 жыл бұрын
I didn't use the suction cup...use the clamps as shpwn or if you have a dedicated sim table you could possibly screw or bolt the mounting plate to the surface before installing the yoke or quadrant
@chassmash89033 жыл бұрын
They say you can carefully put the plastic back on (that is if you still have it ;-) )
@CascadiaAviation3 жыл бұрын
@@chassmash8903 Brutal... I'll have to rig something up.
@robocopmbl31553 жыл бұрын
Where did you find the 737 handles? Or do they come with it?
@rbarlow3 жыл бұрын
Yes they and the GA handless both have nice reusable storage boxes
@justinloup3 жыл бұрын
Do you have plans for your mounting stand?
@rbarlow3 жыл бұрын
I kinda just eyeball it as I go but I do have a video on when I first built it kzfaq.info/get/bejne/i5ljhsyHvteXZp8.html
@ReynSquared3 жыл бұрын
13:29 Official ryanair pilot
@rbarlow3 жыл бұрын
It was a fairly firm touchdown😀
@mowax743 жыл бұрын
@@rbarlow You flared too much, floated, then dropped like a stone ;)
@rbarlow3 жыл бұрын
@@mowax74 yeah hard to believe I have over 15k hours flying the B737...don’t worry I’m retired now so I won’t hurt anybody 😀
@bharathshyamsunder70783 жыл бұрын
Seemed more than safe! *Insert cliche about a “good landing”. Thank you so much for sharing your knowledge!
@rbarlow3 жыл бұрын
@@bharathshyamsunder7078 my old Chief Pilot used to say "As a pilot you're only as good as your last landing"
@Chessed383 жыл бұрын
How much is that Honeycomb Bravo Quadrant. You may have said the price but I need to know my fellow pilot friend.
@rbarlow3 жыл бұрын
US$249
@newoperson2577 Жыл бұрын
can you use it without the yoke?
@rbarlow Жыл бұрын
Sure it has a separate usb connection to your computer
@newoperson2577 Жыл бұрын
@@rbarlow yoo thats great thanks!
@elmalloc3 жыл бұрын
where can we get one
@rbarlow3 жыл бұрын
you can order but it is not released yet.
@tickledhorse Жыл бұрын
You've probably already found it and are already aware of it, but here is a link I think you might be interested in. kzfaq.info/get/bejne/id5mfq1hyavYpac.html
@ghostcornman4513 жыл бұрын
what rudder pedals do you use?
@rbarlow3 жыл бұрын
I have two Discontinued Saitek Combat Pro Rudders and VirtualFly RUDDO. RUDDO is awesome.
@CC-gt3ro2 жыл бұрын
I prefer use the real knob and instrument in the real cockpit to learn each plane. If you use knob on yoke, you won’t really learn each plane that are different. I like the six handle in VR , eventually the flaps but i prefer using the mouse in real to activate the plane instruments except for power, rpm and mixtures. And i prefer flight simulator 2020. Fs2020 is far superior for me.
@rbarlow2 жыл бұрын
Thanks for your input…makes sense.
@theozzieflightsimmer15523 жыл бұрын
spad.next have they bought out a profile yet?
@rbarlow3 жыл бұрын
Not sure...not a spad,next user...sorry
@theozzieflightsimmer15523 жыл бұрын
@@rbarlow i play more p3d than anything running fs passengers and opus weather ultimate traffic etc. Have a complete saitek flight deck and was getting a heap of errors. Plus the drivers didnt work unless you muck around with the power management usb device regedit. So just purchased spad.next. and solved that issue with crashing with overlays and also works perfect with all aircraft on msfs2020. Check it out may be worth your while.
@cindercide3 жыл бұрын
do you have the airbus throttle pack? (thrustmaster)
@rbarlow3 жыл бұрын
Not yet but on preorder
@cindercide3 жыл бұрын
@@rbarlow will you be reviewing it?
@mikem.20783 жыл бұрын
I honestly can't figure out why one would need to get it. I have the T16000 setup (stick, throttle, pedals combo) and it appears going and buying the specific Airbus setup would be minimal and a waste of money (there's one youtuber who is making that very jump) -- a little visual difference, base color, and the dual throttle rather than single, is all I can see. Thus the airbus setup looks kinda silly if you already have a stick setup.
@rbarlow3 жыл бұрын
Maybe if you ONLY flew the bus....otherwise I agree. I do like that the Airbus stick has two changeable grips for left and right hand use.
@SIMRIG4123 жыл бұрын
@@rbarlow not grips. Just 2 silly buttons that are junk. Check my channel I did a short review opening it. Airbus is a t1600m
@airste1723 жыл бұрын
Looks like an awesome product unless you fly a Cessna.
@TheOneTrueSpLiT3 жыл бұрын
How does this (and other throttle quads such as the Saitek/Logitech) compare to the real thing in terms of size? To me they seem very small in the videos such as this that I've seen them in and that's kinda putting me off getting one. The same applies for the Saitek/Logitech Yoke which I don't think is true-to-life size and smaller. Are you able to comment on these concerns I have? TIA.
@cebrady3 жыл бұрын
He said in the video - they're around 58% true size.
@rbarlow3 жыл бұрын
The airliner handles smaller than IRL but if they weren’t the would take up a lot is space and not sit on your desk. The general aviation handles are pretty close to real life sized. If you want to fly only airliners and have plenty to spend there are some nice 1:1 scale quadrants but you would need to build or buy a control pedestal to mount them. The Bravo is a nice compromise between flexibility, realism and cost. It nicely integrates with the Alpha to provide a lot of the controls needed to avoid relying on the mouse and keyboard to fly. For $250 it offers more value than other options I know about.
@TheOneTrueSpLiT3 жыл бұрын
@@cebrady Did I ask you???
@kbg9903 жыл бұрын
It looks as if you've had the quadrant for at least 8 years
@rbarlow3 жыл бұрын
Okay I give...why?
@kbg9903 жыл бұрын
@@rbarlow Because there are scratches and wear and tear everywhere. At least so it seems.
@rbarlow3 жыл бұрын
I ordered the prestressed version😀
@kbg9903 жыл бұрын
@@rbarlow oh, haha that explains it. I was secretly hating on you slightly for being so rough on a brand new product! Nah, just kidding. Great video!