I am not an instructor. Please seek professional instruction. Texas Tug, Pinto Cinch, Bunny Ring Cinch, Midline Attachable Canopy Anchor
Пікірлер: 60
@alexmelnua10 ай бұрын
Great content! I was just looking for this kind of information and found it on your channel! Thank you so much for supporting those who are taking their first steps in arboriculture at the age of 66.5! 😃 🇺🇦❤️❤️❤️❤️❤️❤️❤️🇺🇦
@Joesdifferent5 жыл бұрын
I always come back to the early videos that taught me what I know now and have achieved to make other configurations from now that I have really sincerely grown into the real climbers hearts I would like to say thank you very much for this video that you took the time to make
@NHlocal7 жыл бұрын
Great video. Good demonstration of the basic canopy anchors. Thanks for taking the time to post it up. Be safe. Ranndy
@strandymusic5 жыл бұрын
Thanks so much. Great filming and commentary!
@MrSingleJack7 жыл бұрын
Excellent video, Brendon … good job!
@TreeGirlDesigns7 жыл бұрын
Nice Presentation! Great ideas for Canopy ⚓!
@ryanalbright65106 жыл бұрын
Great instruction. Thanks for sharing.
@SlamPvP6 жыл бұрын
another benefit of the pinto for an anchor is if the pulley axle fails it is backed up by the rated becket below
@falfield6 жыл бұрын
Very nice - good clear explanation.
@proxy78637 жыл бұрын
Great video, many thanks.
@jamesleem.d.74425 жыл бұрын
I like that Bunny Ring
@ismaelexplorer34043 ай бұрын
Nice video brother
@birdisinfire5 жыл бұрын
Thanks very instructive
@bossbirdie43483 жыл бұрын
Great video
@victorgutierrez58264 жыл бұрын
very instructional video, also I saw that kind of carabine whats the model or name of carabine
@paulohenriquemarquezinilei46466 жыл бұрын
Nice video! Whats the name of this yellow stuff to retrieve the carabiner? Hugs from Brazil. Thank you
@robertbettis65524 жыл бұрын
thx for sharing
@abusyamilmulyadi35436 жыл бұрын
very nice..good educated
@getoffmylawn364 жыл бұрын
I watched a video about opening angles to reduce forces using redirects. Do you get these benefits without a basal anchor? If you only have a canopy anchor and redirects
@theronwinsby4 жыл бұрын
dmm xsre - did you just stap the little biner through the rope? or is the rope eye spliced?
@BatmanProject7775 жыл бұрын
I don't have a long enough rope to tie a butterfly mid line, to have retrieval length too. I usually like to tie a barrel knot to my biner and choke that to the limb. I love the butterfly though. Can a butterfly be used near the lines end ?....or does it ideally need to be more mid line, to help prevent it "walking / creeping" loose ?
@toomuchsawdust98605 жыл бұрын
You can use it near the end no problem. Attach your retrieval line to the knot or a splice.
@vincentherman4686 жыл бұрын
Good video but on the last revolver setup how in the world would you pull out 5-6 redirects? When that end of rope caribiner catches that first tie in, how are the other 5 tie ins pulled out?
@toomuchsawdust98606 жыл бұрын
Vincent Herman Natural Redirects. Not 5 or 6 of these.
@vincentherman4686 жыл бұрын
But on the last one you said you've done 5 or 6 redirects and it pulls just fine. I'm still a little lost. Maybe an example on how you would set 5 or 6 redirects and pull this (pinto revolver) just fine. Thanks.
@SlamPvP6 жыл бұрын
5:50 VERY minor point to be made. carabiners should be opposite + opposed. in this case the ultra O carabiner could be flipped while keeping the gate facing the same way cheers, great video
@toomuchsawdust98606 жыл бұрын
Tom G while that is normally the prudent thing to do, I feel like the pulley separates them enough to not be an issue. I like to face the both away from the tree. My observation has been that the trunk is far more likely to open a gate. Thanks for sharing.
@SlamPvP6 жыл бұрын
yea in this set up it isnt a problem, i like the way you set up the ring cinch too. i think id prefer to use the ring as no worries cross loading it and no rope on rope friction ever thanks
@jcjc41055 жыл бұрын
Do you use that webbing all the time? It is safe? I want to do something like that, like a friction saver for DRT.
@toomuchsawdust98605 жыл бұрын
I can't tell you if it's safe or not. It's widely used, I use it often.
@justinrutan17952 жыл бұрын
How did you put the hole in your rope to accept the small retrieval carabiner
@toomuchsawdust98602 жыл бұрын
Red hot coat hangar.
@79brumley6 жыл бұрын
Is that yale blue moon. Rope?
@eithieus16523 жыл бұрын
Yes
@Joesdifferent4 жыл бұрын
Have you heard about the zrunner?
@cameronstudley1963 жыл бұрын
where can I find break test reports for the pinto cinch? I was considering performing my own break tests but would be nice if I dont need to
@sempi81592 жыл бұрын
Would be interested in that to!
@cameronstudley1962 жыл бұрын
@@sempi8159 I tried my own tests (only 2 of them). I did one with a basic pulley and a quick link. I used a well used rope so the test wasnt super reliable. But I believe the pulley methos was weaker due to the "sharp" edges digging into the rope in the knot. My tests broke close to 3000lbs.
@sempi81592 жыл бұрын
@@cameronstudley196 which sharp edges? Thats not alot🤔 gonna stick to the texas tug then i guess😅
@cameronstudley1962 жыл бұрын
@@sempi8159 I was using a Petzl Fixe pulley. It has those hard edges on the frame. so not sharp but sharper than a quick link. But dont forget that this rope was well used and several years old. The rope probably only had a break strength under 4000. maybe I'll ask @hownottohighline for a test
@sempi81592 жыл бұрын
@@cameronstudley196 ah, very nice! I was wondering about the fixe pulley. Seems like its the “pinto light” a bit cheaper and less strength and finisch. But the pinto is very smooth and rope friendly so im sure that will be alot better. Especially with good rope😌 Would love if hownottohighline made more arborist content!
@UgotSprucked5 жыл бұрын
3:45 I don't think loading the carabiner across the spine like that is proper. Carabiners are meant to be loaded along the spine. This configuration you've presented loads the spine perpendicular to the way it's supposed to be loaded.
@UgotSprucked5 жыл бұрын
I guess any which way you decide to orient the carabiner in the Pinto Cinch configuration is loading the carabiner in a strange way. Not so terrible that I would deem it unsafe or anything, but it's not being loaded in the way it was designed to be. I'd say, whatever way you wanna put the carabiner is fine, as long as the gate cannot be accidently loaded or opened by pressing up against the stem. Great video by the way. Lots of different options for CA's! Thanks duder
@julianalderson69965 жыл бұрын
get ya line out from ground" otherwise why
@toomuchsawdust98605 жыл бұрын
English?
@UltimateMMAFan834 жыл бұрын
I've noticed something on every video. No one and I mean NO ONE has shown WHEN to tie a alpine butterfly. I can only ASSUME webern the other end of the rope comes back to the ground, you make a alpine butterfly and run the other end through it and pull ALL THE ROPE until it cinches up onto your tie-in point (canopy)
@aliray11655 жыл бұрын
That last configuration looks way too complicated to be useful.
@seanmack87313 жыл бұрын
Lol how is a jammed pulley saver complicated?
@aliray11653 жыл бұрын
@@seanmack8731 you’ve clearly not done a lot of tree work if you are asking this question. It’s not complicated to understand, it’s complicated for the work.....things go wrong, things get caught.
@seanmack87313 жыл бұрын
@@aliray1165 different scenarios require different tools. It’s definitely not too complicated to pull out a cambium saver and while I don’t use that set up every climb. It does come in handy although I usually just basal tie. Yeah, I don’t do enough tree work. Your the one saying a tool[cambium saver] is too complicated to retrieve even when this is one of the most basic techniques and a standard on double rope if you are pruning. Yeah this is modified with pulleys and a little webbing sling but same concept on retrieval.
@aliray11653 жыл бұрын
@@seanmack8731 nah it’s too complicated to be practical. Any tree worker with a reasonable amount of experience knows this lol
@seanmack87313 жыл бұрын
@@aliray1165 is that right? Lol. I bet you are a great “tree worker” bud.