Stage 4 Revo Fiesta ST TTV Clutch install and super billet flywheel

Рет қаралды 7,812

5 жыл бұрын

So with big power on these little pocket rockets you need bigger, stronger and better parts than OEM and as good as the OEM clutch is it's been proven alot recently by other that the stock AP Racing clutch is not strong enough unfortunately. Thankfully TTV Racing make an amazing clutch and flywheel package for this car and they can make it how you want for the power you run and for what you use the clutch for.
We need ours for fast road and loads of trackdays etc.
See what we think of the package and watch on to see basic tips and how to's and of course hit us up with loads of questions in the comments section.
We will be testing out the cars 0-60 with this big power kit now that we have 330-350bhp, this awesome bit of kit from TTV Racing is class, we now have a mega 230mm 5 paddle clutch kit with a billet aluminium flywheel -
ttvracing.com/
Thanks for watching and as always like, comment, share and subscribe and we’ll see you again on the next
- Subscribe For More Car Stuff / @peakperformancereviews
- Follow Me On Instagram; @peakperformancereviews
- Follow Me On drivetribe; drivetribe.com/t/peak-perform...
- Follow Me On Twitter; @peakperformancereviews
- Use Code peakperformanc15f to get 15% off at uk.sparcofashion.com/
If you like as always guys and girls please comment, share, like and subscribe etc

Пікірлер: 46

@f150lightningboy 2 жыл бұрын

Skipped the most crucial part of this DIY. Good job!

@PeakPerformanceReviews 2 жыл бұрын

? What’s that? The rest is kinda obvious from this step if you’ve done clutches before or is there something specific you found you had an issue with? I’m lost?

@f150lightningboy 2 жыл бұрын

@@PeakPerformanceReviews You didn't show the complete removal....just skipped the removal and went right onto the ground. Showing the whole process is alot more informative and helpful for Newbie DIYers. Not getting into a urinating contest....just pointing out the obvious.

@PeakPerformanceReviews 2 жыл бұрын

@@f150lightningboy nah I get you fella, that’s why I didn’t bill it as a how to or anything like that, it’s so time consuming while videoing but I totally get what your saying

@f150lightningboy 2 жыл бұрын

@@PeakPerformanceReviews How has the clutch held up? I bought an RTS

@PeakPerformanceReviews 2 жыл бұрын

@@f150lightningboy I haven’t got the car anymore but before selling I had done 15000 road miles on that clutch and around 10 Trackdays and it felt like it did when it was brand new 🙌👍 was mega!

@fordyford 5 жыл бұрын

Good stuff. Now you can enjoy it with one less worry. Bed it in and hit the 1/4 mile. Be free for 13 seconds or less.

@PeakPerformanceReviews 5 жыл бұрын

Fordy Ford haha if only 10 seconds or less like Dom lol! Haha yeah it’s bedded in already so we’ll be doing all kinds with the car very, very soon.

@Brown_Hammer 5 жыл бұрын

Cool man :D

@PeakPerformanceReviews 5 жыл бұрын

Thanks fella, glad you like, If you haven’t already we’d love you to subscribe and stick around :-) :-)

@dogboy4912 5 жыл бұрын

Good stuff, guessing it should feel somewhat faster now without the clutch slipping!? My FiST has done only 14000 miles as i approach 3 years and I'm def going big turbo guess I should pencil in a new clutch as part of the cost. Are you thinking about getting a LSD?

@PeakPerformanceReviews 5 жыл бұрын

DOG BOY yes 100% from what I’m hearing of other people that are trying to stay with the stock clutch it ends up not lasting long at all so yes. I wanna see how everything feels in a few months and see if all’s going well then. LSD wise I’m not sure, I’m going to go with more hardcore track rubber and lightweight alloys first then re asses very soon then for sure that’s a possible future mod.

@SaberWavesCoaching 5 жыл бұрын

👍

@PeakPerformanceReviews 4 жыл бұрын

yep

@dallinmcquivey6213 Жыл бұрын

what bumper is that?? is that a eurodm oe bumper? it's beautiful

@PeakPerformanceReviews Жыл бұрын

It’s a Maxton Design “RS look” bumper it’s on their website, suits the car a lot doesn’t it 🙌❤️ thanks for the kind comments and for watching! Please stick around and subscribe as we need more good people like you on here 👍👍

@columbiariverdetailing1943 3 ай бұрын

How did you ypu lock the flywheel in place while tightening the bolts fown

@PeakPerformanceReviews 3 ай бұрын

Just a generic locking tool bud

@richardmontgomery474 5 жыл бұрын

Hi Alex , I am in Norfolk , same sort of mods as yourself..are you considering aux fuelimg to reduce the stress on the fuel system..

@PeakPerformanceReviews 5 жыл бұрын

Richard Montgomery hello fella, probably not as at this level there seems to be a little left on the table, not loads but for me knowing this is as far as I’ll take power mod wise, plus or minus 3-5bhp maybe with a few small future plans I’ll leave it. Thanks for watching Richard really appreciate it, what do you do with the car out of interest? Only fast road or track etc?

@richardmontgomery474 5 жыл бұрын

Yeh fast road use. Been talking to SBD motorsport about fuelling. They developed some good products for the engine. Good channel keep up the good work..chap..

@PeakPerformanceReviews 5 жыл бұрын

Richard Montgomery are you on insta and Facebook as we have pages on there you can inbox us on, interest to hear any info always so thanks. Thanks for the kind words fella, massively appreciate comments like that, if you haven’t already then please subscribe and stick around as it’ll be great to chat again :-)

@DanielA-le5cn 3 жыл бұрын

Did you guys remove the subframe when you did the job?

@PeakPerformanceReviews 3 жыл бұрын

No you can do it still in situ if you take enough out in the bay, we may have lowered and loosened it a little but it doesn’t need to come out. I can quite remember fully but I know it didn’t come out. I know some say you need to, you don’t but it will add some time and you shouldn’t need to.

@DanielA-le5cn 3 жыл бұрын

Awesome thank you! And how long does the job take, I have to do mine

@PeakPerformanceReviews 3 жыл бұрын

@@DanielA-le5cn no problem fella. It took us about 5-6hrs bud. Thanks for watching, please stick around and subscribe as it’ll be great to have you around

@thurmanmerman9099 6 ай бұрын

how much is the clutch kit ?

@PeakPerformanceReviews 6 ай бұрын

When I bought it it was around £1100-1200 but these are now about £1000 from Jamsport - www.jamsportstore.co.uk/products/fiesta-st-mk7-ttv-racing-clutch-kit Even available on Klarna which is epic if you wanna spread payments for such a great strong clutch 🙌

@meganjay30 2 жыл бұрын

Holly fk..... 11 months no oil change..... 😱 Since brand new I have done an oil and filter change every 5000km and just hit 21,000km today.. I have to do a gearbox oil change at least every 12 months as the gears get really tight and hard to change gears.. Due for a new clutch in the next 10 to 20 thousand kilometers...

@PeakPerformanceReviews 2 жыл бұрын

Using ester Race oil helps tbh, such a high quality oils! It’s longer than I normally leave it, thanks for watching fella 🙌😎

@shineautomotive 5 жыл бұрын

if anyone wants a quote on a clutch and fly wheel if you quote Peak performance reviews we will give you a massive discount

@PeakPerformanceReviews 5 жыл бұрын

Shine Automotive ahhh mega thanks fella, you guys get TTV stuff? we can put you in touch if that’s something you want to stock if you don’t already 👍👌😎

@shineautomotive 5 жыл бұрын

Peak Performance Reviews cool mate catch up with you at Snetterton. Just a quick question how long does it take you to get your first hundred subscribers it’s a tough old world out there to get your content out.

@PeakPerformanceReviews 5 жыл бұрын

Shine Automotive didn’t take too long as loads tend to be friends, it’s the next 300-400 extra that will or can take a while. Some people take 10 years to get to 1000, it’s taken me just over 2 to get the size I am but I’ve always worked for about 30-50hrs a week on the channel across networks. Very very hard to grow on KZfaq unless you have a very clever idea and contend. No magic wand and man it’s hard trust me.

@1krista1969 2 жыл бұрын

I purchased the TTV flywheel, which I had to order overseas from the UK to replace my failing DMF. The stock flywheel on the fiesta st is horrible in terms of durability. I was going to run another stock clutch along with the TTV solid flywheel, but the stock clutch disc doesn't has a solid hub. The problem is without the dampening of the DMF, a solid hub clutch will let all the sharp torque spikes through, which is very bad for the transmission internals. I'm trying to find a good clutch kit with a sprung hub, but the only option here in the US is SPEC, which I don't like. What clutch did you end up installing in your fiesta?

@PeakPerformanceReviews 2 жыл бұрын

@@1krista1969 don’t know how I missed this message thanks for watching fella what did you go with or what do you now have? Do you still have the Fiesta?

@RafaelViegas 5 жыл бұрын

Beautiful fiesta, but i prefer the super blue ford KA....

@PeakPerformanceReviews 5 жыл бұрын

Rafael Viegas haha that’s fella, I know the little KA Is hard to beat, this Fiesta is hard to beat too and does give me a massive fun factor and feel just like the super blue ka :-)

@RafaelViegas 5 жыл бұрын

@@PeakPerformanceReviews ahhhahaha thanks brother hahahaha

@PeakPerformanceReviews 5 жыл бұрын

Rafael Viegas welcome buddy 👍👍👍

@907thpeterson 4 жыл бұрын

Funny. The US Spec Fiesta’s ECU cover is a piece of plastic. Stock US clutch isn’t an AP clutch either and many people run it no problem over 350 HP. Your clutch looks smoked. Wasn’t the clutch that was the problem. So much for a howto when you skip filming most of the transmission work, but manage to record your oil change.

@PeakPerformanceReviews 4 жыл бұрын

Matthew Peterson are you sure it’s not manufactured by AP Racing? If not any ideas what or who does? The stock clutch will take 350bhp if you use it for road but if you do about 20 Trackdays a year and go to the Nurburgring and Spa for Trackdays it’s not going to how you. It’s a great clutch but it has its limits. For what we are using the car for it just isn’t good enough. What is you honest usage with it? And also what do you think the problem was then? I’m intrigued? Yeah to be fair it wasn’t a how to, if I did lead you to believe this I’m sorry but thanks for watching none the less. What has your fiesta got on it? How much over 350bhp is it sounds interesting for sure 👌👍