Stained Glass Fundamentals - How To Hang Stained Glass V328

Рет қаралды 15,241

Күн бұрын

Stained Glass Fundamentals - How To Hang Stained Glass. David Gomm shows 4 ways which can be used to hang stained glass. Stained Glass Fundamentals - How To Hang Stained Glass is an essential primer on how to display stained glass.
We film with eye shields and safety guards removed.
You should have all safety attachments in place and
wear a respirator when cutting and grinding. Use all
precautions to insure your personal safety.
Another video that you may find interesting is at
• Tech Tip Thursday - Ha...
Gomm Stained Glass, LLC
To Find All Our KZfaq Videos..go here
www.gsg-art.com/videos.html
go to the listing at the bottom of the page
Our Web Site: www.gsg-art.com
Join Us On Patreon For More Great Content
www.patreon.com/gommstainedgl...
Email David: david.gsglass@gmail.com
Email Jeanne: jeanne.gsglass@gmail.com
Our Etsy Shop:
www.etsy.com/shop/GommStudios...
Our You Tube Channel: / betterstainedglass
Look For New Videos on Wednesdays at Noon (MST)
Glass On My Mind Blog: glassonmymind.blogspot.com/
Facebook at / gomm-stained-glass-173...
Instagram: @JeanneGomm

Пікірлер: 27

@elizabethsomoza4879 11 ай бұрын

Thank so much! I really enjoy your teaching. I always wondered how the installation was done. 😊💕👏👏👏

@GommStainedGlass 10 ай бұрын

You are so welcome! There are so many ways to hang!!

@kcboyett3828 8 ай бұрын

Excellent video! Thanks so much for making this - it is so helpful.

@GommStainedGlass 8 ай бұрын

Thankyou, this is one of the videos we've done that I'm especially proud of 😀

@jesusisgod6474 Жыл бұрын

Very well explained and illustrated. Thank you!

@GommStainedGlass Жыл бұрын

Thanks, sometimes we luck out!

@glasslight7960 3 жыл бұрын

Awesome work. Your love of stained glass absolutely shows!!

@GommStainedGlass 3 жыл бұрын

It's true, we love stained glass and we hope to share that love with others so we can build a great stained glass community. We hope you found the video of worth. 😀😀😀

@kimberlyunger 3 жыл бұрын

Great video, thank you! It was neat to see the different uses of silicone and caulk.

@GommStainedGlass 3 жыл бұрын

If I can, I use caulking instead of silicone because it's easier to clean up. I avoid the product that goes on white and turns clear because it doesn't always turn and then you've really got a mess.😮😎😮

@jeanr1120 3 жыл бұрын

Great information...thank you.

@GommStainedGlass 3 жыл бұрын

My pleasure, I can't believe I haven't taught that before. Many install videos just not ALL the ways to install 😀😀😀

@renacuajo4916 3 ай бұрын

That long door window piece was quite nice. The one right before the insulated unit segment. What size foil did you use for the door piece?

@GommStainedGlass 2 ай бұрын

1/4" foil that was 1 mil thick

@davidhill1220 2 жыл бұрын

Thank you for this video I did notice you didn’t explain( how )the hooks were attached to the frame Also my windows are mostly round When I solder hooks on they sometimes break off the frame thus crashing to the ground🤔😖 Thanks again Patricia

@GommStainedGlass 2 жыл бұрын

On metal frames we solder rings to the frames and on wooden frames we screw in rings or screws through chain. You may wan to look at our video on soldering rings kzfaq.info/get/bejne/rLycmdeJt-C-pX0.html you want to avoid a "cold" joint on your rings. Good Luck

@robertracen6925 10 ай бұрын

Great video, Thank you so much for all the information! Question for you, how would you install stain glass into a hollow vinyl fence/siding?

@GommStainedGlass 10 ай бұрын

Good question! When doing installs outside I always install into a solid frame, metal or wood before hanging glass, I usually want the wind resistance to be small so I limit the size of the piece. Good luck on your install, I'd love to see your results.

@MotorcoachVocalist Жыл бұрын

Hi David and Jeanie! I’d love to pick your brains. I have a stain glass panel framed in oak that I would like to place vertically in my front door on my home. There is currently a glass panel in that front door that is larger than the Stain glass piece I have. What would be the best way to either install, or affix, or hang, my stained glass panel, so that I can enjoy it as part of my front door? Is there a way to get in touch with you to discuss this? Thanks so much for even considering reaching out.

@GommStainedGlass Жыл бұрын

I'm sure you could adapt one of the methods mentioned in the video to fit your circumstances. You could always send photos to me david.gsglass@gmail.com so I could look at the existing door

@kristycannon7923 3 жыл бұрын

Hello David & Jeanne! I'm getting ready to install my first large panel! Instead of nesting the panel inside the window space, it's actually going to rest up against a black metal industrial frame that the window currently has around it. There is a rectangular wooden casement surrounding the black metal frame with a width of a 2x4. The carpenter is going to build a frame/trim to hold the panel in place up against the black metal framing. Do I still need to use silicone? And should I use shims at the bottom to allow for air circulation between the two panes? There will be approximately 2 inches of space between the stained glass and the window glass (going outside)...the depth of the black industrial metal framing. They would also like to place a clear (unsealed) glass pane in front of the panel to keep people from touching it. As always any concerns or thoughts would be appreciated! Thanks, Kristy 🤗

@GommStainedGlass 2 жыл бұрын

How did it go? Sorry to be so slow about getting back to you.

@lesliegigante6805 Жыл бұрын

What kind of two sided tape did they use? Foam, open cell, closed cell, rubber?

@GommStainedGlass Жыл бұрын

I don't use two sided tape, I use painters tape to hold the glass in, with a folded piece of cardboard that acts like a spring to put pressure against the tape and the glass

@lesliegigante6805 Жыл бұрын

@@GommStainedGlass Did you set the zinc frame right up against the glass? The slight bubble that you get when you join the solder lines to the zinc frame causes it to stick out just a bit. I love your videos they are so full of useful tips. Thank you for taking the time to make them.