Stampable Overlay by BRICKFORM

Рет қаралды 87,950

12 жыл бұрын

How to install Stampable Overlay.
BRICKFORM Stampable Overlay SC60 is a premixed white cement blend of special materials that, when mixed with water, forms a thin, Stampable concrete coating. SC60 Stampable overlay can be integrally colored using BRICKFORM Overlay Liquid Colorants and topically colored with a wide range of BRICKFORM coloring products. Stampable Overlay can be used interior and Exterior.

Пікірлер: 25

@BMWBADBOYM3 5 жыл бұрын

Watching all your videos. Great work!!

@chuckerroo5977 4 жыл бұрын

great job! bet your back was burning after that one great info on the pre texture with the skins

@dienamend9413 4 жыл бұрын

Excellent Job!!

@mastersmokey8924 7 жыл бұрын

good job guy s I hate doing drive way like that bit somebody got to do it

@LaserMade84 2 жыл бұрын

How much does this process regularly cost per sq ft?

@josueruelas4512 2 жыл бұрын

How many bags did you guys used for that project or how much coverage per bag And what did you use to seal joints and prime?

@jjh889 2 жыл бұрын

Can this be applied vertical for concrete steps?

@sergioo2715 2 жыл бұрын

Are you using standard stamps or OL stamps? It seems you are having to texture it in addition to stamping because you are using the higher relief stamps and they would hit base surface before imprinting the flat part of the stamp.

@tylerbauer4583 6 жыл бұрын

What is the name of the surface evaporation product you are using? Also how and when would you apply it?

@ernestoestrada8092 6 жыл бұрын

will this workg at wall ? stamp

@BKMDano17 6 жыл бұрын

How thick can you pour this without getting cracks and where do you but it? I'm on the West coast and I was dumbfounded because as a 40 year general I couldn't find any information at all

@SolomonColors 6 жыл бұрын

We recommend applying Brickform Stampable Overlay at between 1/4 inch and 1/2 inch thick. For complete technical information, visit www.brickform.com and read the TIS.

@hardworkhardplay 4 жыл бұрын

When you said global antiquing product what exact product of your product like did you spray over the top of everything

@areeskinwar7274 4 жыл бұрын

What's the lifespan of this application vs stamped concrete? or lifespan of both....im a contractor that wants to get into stamped concrete soon

@SolomonColors 4 жыл бұрын

With proper surface prep, this should last as long as the underlying concrete. Stampable Overlay is great for renovations where a tear-out-and-replace isn't desirable or possible.

@ben.sallieholloway8898 8 жыл бұрын

Do you have to prime the concrete for the slurry?

@SolomonColors 8 жыл бұрын

+Ben.Sallie Holloway It's always best to prime. Make sure to properly prep the surface, make any necessary repairs, and prime with Brickform Triple Seven Bond Coat.

@ben.sallieholloway8898 8 жыл бұрын

What was used for the cracks?

@SolomonColors 8 жыл бұрын

+Ben.Sallie Holloway We fill with epoxy and sand, ground flat, then applied a slurry of the SC-60. Once the project was complete, we re-cut the joints and then caulked.

@jessemarin5044 7 жыл бұрын

+SolomonColors why didn't you show the process on filling the control joints as it applies to the project start to finish,is there a video on that portion of the process for your viewer's and thanks for the vid it's always a pleasure to watch.

@SolomonColors 7 жыл бұрын

This video was intended to focus more on the application and stamping of the Stampable Overlay. For more detailed information on how to treat cracks and control joints, watch this video: kzfaq.info/get/bejne/eq6dY5d-sZbaiY0.html

@jessemarin5044 7 жыл бұрын

Cool thanks every little bit helps in the mental process,can this be layed over a concrete pad that had spalded up due to salt in the winter or driving on it with studed tires or is it a different process thank you very much for your time and expertise.

@fidelfernandez3006 8 жыл бұрын

Will this work on driveways !!!???

@SolomonColors 8 жыл бұрын

+fidel fernandez Brickform Stampable Overlay is appropriate for most interior and exterior applications including driveways - especially applications where it would be difficult to tear out the existing concrete. Work closely with a contactor you trust to determine if Stampable Overlay is the right choice for your situation.