Funny all the criticism about how slow the driver is, when this whole procedure is about checking aisle width and maneuverability (probably setting up a new warehouse) The driver is probably not even a forklift operator but merely standing in for the testing.Even if he is a certified driver it is not about speed but analysis of aisle width and what will work best.
@costilla12124 жыл бұрын
Alrighty let's look in the comments for all Ultra Pro forklift operators that could have done this in 0.2 seconds in an aisle half this size
@ddeeddee13806 жыл бұрын
Ever seen a warehouse open and close within the same month
@tule86693 ай бұрын
Is it this one?
@SpasticHatchet7 жыл бұрын
Some weak racks. One mistake sends the whole warehouse to the floor
@ajhare25 жыл бұрын
StarRazor i work at rite aid, we have these racks. (At least they look the same). They’re pretty rough. Rite aid doesn’t care about safety, people hit them all the time and they’ve never collapsed
@Alex425trejo5 жыл бұрын
That's exactly what I think
@markjones23613 жыл бұрын
If they are properly anchored, they'll be fine
@BostonJonny822 жыл бұрын
I know this is an old video, but my company just switched the fork lengths on our trucks from 42" to 36". (looks like the forks on this truck are 42") That extra 6" made all the difference in the narrow aisles! It was about $500+ per pair of new forks that just drop right on. For 95% of what we are lifting they work fantastic and I am not concerned with counterbalance issues even when raising 20 feet high. And we can still switch out to the longer ones if absolutely necessary.
@antoniomcclutchie3325 жыл бұрын
You put your forks in the gaps around the product in the racking to help give you more clearance between both racks either side which gives you more mobility to move around.
@ElectronicsForFun4 жыл бұрын
try going down one of my aisles. you can not get the machine sideways in the aisle like that. you have to raise the forks and turn into the pallet and line up with the pallet while you have the forks inside of it. and then you have to pull out the pallet sideways and you have to do a lot of side shifting to get it out of there. I don't think it can be any tighter.
@mrsantana90943 жыл бұрын
Reach trucks are old school. Modern warehouses use VNA wire guided turrets for this sort of work
@axelsmith41636 жыл бұрын
The warehouse I started in, I operate the exact lift in this video, the racks were not much if at all wider than 7ft. It was necessary to use the side-shift to get into the pallet while dodging the upright.
@ElectronicsForFun4 жыл бұрын
yeah I have been there.
@BIGAMP20007 жыл бұрын
my thing is...what happens when you get the pallet on the forks..most pallets over hang the forks about 4 to 5in ...they gon have all kinds of rack damage. .not to say that the pallet can't be taken out
@skux206 жыл бұрын
ANTHONY JOHNSON this reach truck looks like the trucks that you can push the forks in without moving the forks and pull them out too. But fuck that in this narrow aisle there's literally no margin of error.
@naisaeteurn65044 жыл бұрын
You can easily get that skid out without fuckin anything up
@jonesball06 Жыл бұрын
If u turn and put your forks inside the pallet while finishing the turn, this can ABSOLUTELY be done in 30 seconds or less. I do it everyday at work😂
@kirkangel5256 жыл бұрын
my question is why? unless those items don't move very fast what you're trying to save space wise you're going to lose in efficiency...look how long it took that driver to get himself positioned correctly. if the company is going to stick with that slotting plan I would suggest using a turret truck instead
@leonaustin1236 жыл бұрын
kirkangel525 it's not the company's fault, it's the slow ass driver. Most warehouses are not like the "demonstration" videos where they have so much space to align their forklift with the pallets. The video looks better than it actually was if you're focusing on how aligned he was with the pallet and the aisle behind him. But did nobody notice that while aligning, his forks went directly into the empty spaces where you place boxes, if said boxes were there, he wouldn't have been able have good alignment. In most cases, literally 95% of the time, your aisles aren't wide enough to line up with your pallets. You need to just put the forks at the right height, and turn your forklift into the pallets while using the sideshift feature accordingly. This is much faster to do than what was shown in this video.
@soulassassin0g4 жыл бұрын
Lmao at all the logistics experts in the comment section xD
@jonathonwessling54111 ай бұрын
Then backup further, the back rack is your friend in those circumstances 😅
@jonesball06 Жыл бұрын
When you are running a 150% performance, you make it work 👏
@lostworldtxz4 жыл бұрын
My dude grabbing the steering wheel like a dj.
@edwardmyers17463 жыл бұрын
Ngl I do the same, its quicker n smoother
@morsecodereviews15535 жыл бұрын
This is the reach I trained on, we now have the yellow yale models. They're not much longer BUT just enough to make pulling in and out a pain. Most of the time you have to scrape the outriggers or the ass end to make the turn. Lol that "safety" bar would be taken off so quick at my store it wouldn't have time to be scratched. I work at a "small" home depot where not much attention was given to aisle spacing for getting pallets into spots.
@TheRedGameboy2 жыл бұрын
The instruction I got for certification didn't have it so narrow that I couldn't get a high load out without lowering it first. This tight ass spacing is ridiculous. Especially when ppl let stacked product overhang at the end at all. An extra 5" per aisle would reduce so much grief for newbies (even if reduced storage space were a consequence).
@tttman43853 жыл бұрын
Finally a video with going inside the aisle with a Reach forklift
@MrFakit8 жыл бұрын
Your pallets stick out about 4" so your measurement there should be 0". Have fun repairing all the rack damage not to mention the huge loss of product lol
@KTLP79122 жыл бұрын
Where I work, in some of the aisles you can hit the shelf behind you and still have 6" of the forks in the pallet
@jaytube21127 жыл бұрын
The floor pallets should be resting on an orange cross beam high enough off the ground to allow the out riggers to get under them.
@ElectronicsForFun4 жыл бұрын
why do the outriggers need to get underneath? it would be helpful but it's not a necessity. that's why the forks extend out.
@jaytube2112 Жыл бұрын
@@ElectronicsForFun For more room to turn out when backing up so you don't hit the rack behind you. As you can see, in the video, the driver does not have enough room.
@aaxen7255 Жыл бұрын
At the place I was at all the aisles were too narrow to put the machine perpendicular to the rack. Start parallel to the pallet, turn, pivoting off the front wheels. As you're turning to face the rack your forks are entering the pallet. Once in position, extend the forks all the way in.
@gukobi6 жыл бұрын
We work in tighter spaces than that at my job. We raise the forks to height and pivot 90 degrees into the pallet making adjustments as we are turning. Yall have it way too easy.
@jgbelmont6 жыл бұрын
2 hours later!
@normanrabino70062 жыл бұрын
I've seen other warehouses use a dockstacker stow away pallets on rackings. Narrow reach should really be the only stand up reach to be used on rackings
@garystrucklaterin931011 ай бұрын
I wish the aisles in my warehouse were this wide, we have to use a turret to grab pallets or a cherry picker to manually pull orders
@alleneng7 жыл бұрын
there no way thats 9ft apart
@ElectronicsForFun4 жыл бұрын
9 feet? damn I could swim in that space. the aisles in my store are super tight. home depot lift drivers are usually terrible, we can't afford to be terrible with how tight our aisles are. it takes the new guys 30 minutes to drop a pallet.
@angeldelaluz9215 жыл бұрын
After foreplay for 5 seconds. 😅 2:23
@Nizo-uc8kk2 жыл бұрын
The challenge is going to be removing the pallet off the rack while reversing out
@sirloock83602 жыл бұрын
You raise it above the boxes that are to the left and back out to the right
@lookinforthe70s2 жыл бұрын
@@sirloock8360 Not enough clearance for that.
@AddableStone132 жыл бұрын
If your going to use a Raymond in that narrow of aisle, use a wire guided turret model.
@danielbarrera65973 жыл бұрын
As your turning keep getting closer to the shelf always remember the lower parts of your forklift not to hit the shelf remember the function of your forklift gotta do it with out looking at them hit the button to extend or lower or pull back just by memory some functions move left to right that is if you're not positioned correctly move the fork to pull out the pallets or whatever your working with takes wasabi
@brendan25332 жыл бұрын
Everyone in the comments acting like their forklift licence is a PhD
@brandonlynch76174 жыл бұрын
OP aisle. takes more time to maneuver then to space your racks.
@znovosad5556 жыл бұрын
You made that harder than it has to be. I hate driving the reach truck at work but if you lined your forks up with the pallet height while still they're not facing the pallet, go about halfway distance of the pallet, start turning into it and you'd be able to clear the other shelf without being 4 inches to it. It just takes adjusting and using your side shift. We put our crown reach in tighter aisles than this.
@user-ks7fb9cx1d6 жыл бұрын
I have an interview for this position. came to see what it's like
@jaya19863 жыл бұрын
Hey how did it go
@strongone87687 жыл бұрын
Is this an Austin Powers Scene!????
@SGVSOUTHSIDE6 жыл бұрын
lmfao xD
@smokey51294 жыл бұрын
See at my job you would be hitting the front pallet they have to get there forks in while there mid turn
@limamantapachitas3 жыл бұрын
The aisle is way too tight, you need aisle of 10 ft width, this tigh aisle will slow down you operations, and is not safe
@mahlum26 жыл бұрын
That driver sucks bad lol. The way you do it is have your forks low enough so when your turning in to get the pallet you need you can just put it in. Not turn and be all lined up then back up and lower your forks. Lmfao rookies
@gukobi6 жыл бұрын
Couldn't agree more. He could've buried those forks 10 inches in as he was making the turn, giving him 10 inches of clearance on his backside. They don't call it the narrow aisle reach for nothing.
@znovosad5556 жыл бұрын
Even an amateur home depot reach truck driver like myself knows better. Only time I dont turn into a pallet is when I offload flatbeds with a sit down propane. I've actually gotten a lot better on the reach than I did before. I was going to get a video the other night of me flying a pallet but got caught up and just flew it lol.
@joshualeonard51966 жыл бұрын
He’s driving like he’s scared of that forklift
@killiantitan37115 жыл бұрын
I don't know why you're making a joke out of it, you said it yourself he's a rookie of course he's not gonna have everything mastered everybody has to start somewhere and when you first started you were probably just like him. I know I'm a year late but I just had to say that
@petez4705 жыл бұрын
Yup
@griffengate7 жыл бұрын
They should have supports on the bottom to elevate floor loads so they can swoop In and adjust.
@santiagogarcia53367 Жыл бұрын
That takes up time daily man what the hells going on
@huhwhat688710 ай бұрын
Jeez better pay 18 for that much stress 😂😂😂
@alanl94976 жыл бұрын
You want me to... go in 😳
@dylanddd86445 жыл бұрын
To everyone saying rookie. You can go faster? Sick bud you're a professional making $25 an hour maybe 🤣 just like the guy going slow as fuck. Idk about anyone else but the company i work for i aint being a hero i take my time.
@sasbeachs3 жыл бұрын
Manufacturers actually tout the use of this vehicles in these types of situations. If the truth be told you should be using a swing reach or even a Drexel.
@kilos46552 жыл бұрын
Better use Flexi or aisle master forklift
@davidotoole13088 жыл бұрын
It is tight -but so are most. Your fork also has a wide stance (the front legs are further apart than my Raymond. ps your driver is probably not a regular driver
@transvier15747 жыл бұрын
Rookies
@dustynutts39062 жыл бұрын
Try it with a pacer it's really fun
@MapleManiac8 жыл бұрын
He can't drive that thing very good
@metal.kittens5 жыл бұрын
if it takes you that long to get a pallet down, your not gonna get any work done
@bobbyrobbyn18384 жыл бұрын
Speak when spoken to woman
@LS-ye5pp3 жыл бұрын
@@bobbyrobbyn1838 hell yeah brother
@josh244414 жыл бұрын
Whoever designed this didn't know what the fuck they were doing..... And that's WAY too many empty spaces for a warehouse of that size
@aundreallen8 жыл бұрын
safety violation all day
@jeremymcginty82668 жыл бұрын
+Aundre Can you name the violation?
@MrBarrio1238 жыл бұрын
+Aundre Clarines, aisles too narrow my nigga!
@hundgrand83278 жыл бұрын
It's not but it should be that's ridiculous
@ElectronicsForFun4 жыл бұрын
@@MrBarrio123 I work in aisles smaller than that.
@MrBarrio1234 жыл бұрын
@@ElectronicsForFun Lying ass nigga!
@CLUTCH_LS Жыл бұрын
So a stand up forklift is just a reach truck?
@jeremykardos89488 жыл бұрын
Man what a rookie. I would raise forks straight and turn right into pallet no spot and from j level! Picking a 2500 lbs engine rebuild kit no hesitation
@alekshukhevych26446 жыл бұрын
If you werent a rookie then you would know thats very unsafe, what would you do if you have to pick up a pallet thats 15-20 feet up? Ur center of gravity would be way off, and ur dumb ass would tip the forklift, ROOKIE!
@jessieray10004 жыл бұрын
I think your warehouse and small aisle is going to using for turret reach alike called Raymond or crown.
@michaelochoa12644 жыл бұрын
You ever lift and turn?
@michaelochoa12643 жыл бұрын
@Boltrix now that i look back at this vid sober lol i see these guys have skill. Thats the most narrow aisle to work with. Props to these guys and im sorry for judging them.
@Nizo-uc8kk2 жыл бұрын
Five years later....fuck it just set the aisles 11ft apart
@zflyz71366 жыл бұрын
9 foot? Jesus ours are 10 foot apart though that was narrow for standup I am still improving lol
@philherrup9085 жыл бұрын
I drive these reach trucks all day , this was painful to watch , he makes it look so hard
@robertosola86245 жыл бұрын
IT is hard to drive your first 2 weeks after that it is really easy... it seems this guy is still on training
@tule86693 ай бұрын
Man a warehouse with narrow racks is very unproductive. I think u are paying more wages than profit. 1 pallet every 5 min...
@nachnach7022 жыл бұрын
U could empty the rack by the end of the video BUD...
@almostanengineer5 жыл бұрын
There was loads of room, with mine I get an inch either side!
@almostanengineer2 жыл бұрын
I was just recommended this again, and though, geez, loads of room 😂
@robertdeboer16838 жыл бұрын
that's not a small aisle lmao
@Gibbaempilhador703 жыл бұрын
Gostei muito do vídeo, parabéns!
@dazaussieguy19544 жыл бұрын
wow it can be done but as u go higher its harder close it down
@NightmareX573 жыл бұрын
I drove a stand up an go pallets in an out of racks in tighter spaces you’ll want the Grand Canyon of space to get in an out
@marishka42 Жыл бұрын
I assume these guys are contractor workers, but hard hat will not save this dumb pedestrian if driver lose control (and how he holds steering wheel - he will lose it eventually).
@larryhorne27886 жыл бұрын
That’s crazy
@tEqUiko5 жыл бұрын
If you can do a 360° turn with out hitting the rack with the dam Stan up forklift then is a wrap.
@christianhernandez34285 жыл бұрын
Edgar Martinez it’s impossible to do a 360 turn here.
@danielbarrera9450 Жыл бұрын
Would answer your question but it's lunch break so get off me depart from me evil ones blessings brother 🙏
@ramparvesh3420 Жыл бұрын
My operator
@Neveragain9055 жыл бұрын
I worked in tight aisles but never like that. Thats absolutely unnecessary. A waste of time and maneuverability and not to mention dangerous. Its better geting double deep racks with 9 feet apart that looks like 6 feet to be honest.
@ForrestGump12126 жыл бұрын
Wow only 9 feet between aisles? way too narrow. should be at least 12 feet
@dustynutts39062 жыл бұрын
Man's on a reach it's designed for tight lanes
@davidmoore6344 жыл бұрын
You don't turn with raised forks..
@josephseibert1540 Жыл бұрын
What bullshit! Whoever designed that aisle needs to loose his jon
@col4705 жыл бұрын
We don't need hard hats!
@davebarnett85467 жыл бұрын
I do this for a living and If you told me I had to drive a SUF in that aisle I would laugh at you. This company needs a VERY NARROW AISLE machine.
@ilijaireland3332 жыл бұрын
This is idiotic. Make a bit wider aisle so workers can work faster.
@danc11975 жыл бұрын
The forklift is the wrong color. A tan forklift would have that pallet down in a few seconds. Lesson #1 don't use Raymond.
@dakotapoulton31005 жыл бұрын
Dan C in the warehouse I work we we have our Raymond and a newer Crown. I take the beat up ass crowns any day. Just better quality
@Alex425trejo5 жыл бұрын
Raymond is better
@martz11917 жыл бұрын
That is some too narrow bullshit.
@MrAstronauta238 жыл бұрын
Slow as f*ck...I'll do that in 30 seconds or less. We have to run to make the %
@meyoratata8 жыл бұрын
😅😅😅😅😅😅😅 put a name on this video,, begginer doing his best
@MrAstronauta238 жыл бұрын
Haha indeed. I'm sure That's the same guy that drops the pallets every single day
@meyoratata8 жыл бұрын
+Abiezer Rivas hahahhha,,
@tonixzmac62047 жыл бұрын
5sec bro 30 sec is too much
@user-to7ip1mh8b6 жыл бұрын
this guy alek is a chump..when u know what u doing and they know what their doing fast is way to slow. don't show your face where real work happens...you're a danger to all.u felt bad for him cuz he slow and u relate ...slomo
@villadorado58204 жыл бұрын
This is a FNG
@thefluroaussie10043 жыл бұрын
Go in with lowered tynes ya knobs....
@SkodzGaming8 жыл бұрын
well apart from the fact he does it ridiculously slow, it seems like a safe working environment and practice.
@leonaustin1236 жыл бұрын
Skodz Gaming except that he operates the equipment with coworkers within the 10ft vicinity, or whatever their company's policy allows.
@Neveragain9055 жыл бұрын
Unless you like to practice destroying racks and pallets thats totally bot safe the barrowest asile is 7 or else get a turret truck .
@johme772 жыл бұрын
Definitely does not look OSHA compliant.
@TheDartZone4 жыл бұрын
Narrow? You just squared up "textbook style" to a rack position with the forks completely outside the rack. If that is remotely possible, you are lucky.
@edwardmyers17463 жыл бұрын
Thats a big isle
@skux206 жыл бұрын
Not much margin for error
@leonaustin1236 жыл бұрын
Big Boi plenty of margin for error.
@markwildt57283 жыл бұрын
That's why you enter the pallet at an angle as you're turning... There's no need to to line up straight before entering the pallet... You're defeating the purpose of the reach...
@Dachampof2157 жыл бұрын
also just noticed. that skid/pallet is sticking out about 2 inchs from the rack. so u have 6 inchs. seriously. if u cant drive a NARROW AISLE RIDER then maybe u should find a new job. js
@alekshukhevych26446 жыл бұрын
The skid should always stick out 2 inches from the rack, moron!
@kiwilay92665 жыл бұрын
Why company build like this fuckin get more rooms make it easier
@jamesmorash97023 жыл бұрын
What a joke poor people that work in that place
@tonixzmac62047 жыл бұрын
Bad trainer look at the operator his boot is sticking out. give me 5 sec that pallet would be on the ground by now. won't even touch the racking.
@orangeadventure9756 жыл бұрын
No offense, but that's impossible.
@bradytube6 жыл бұрын
I've worked in even smaller isles where you have to turn into the pallet then side shift. Far from impossible, that isle is easy as fuck in and out in less then 10 seconds.
@leonaustin1236 жыл бұрын
bradytube exact same here, narrower aisles that require you to go in the pallets with the forks at an angle, then side shift a bit. I ha Not sure what Collin means unless he's just used to having extremely wide aisles that leaves you enough space to have your forklift in the aisle sideways with space to adjust your placement.
@rcfreak77720006 жыл бұрын
Collin Stacy I work aisles as narrow if not more narrow. I turn into the pallet, pull it out and turn with it back k down the aisle
@simplyclean49074 жыл бұрын
Idk why they make aisles small
@ricardoruiz59335 жыл бұрын
That’s not bad!! If you know how to drive it you’ll be ok!!
@maxx_michalski6 жыл бұрын
Man this guy is slower then a turtle
@florence43996 жыл бұрын
Get a Bendi or Aisle Master 👌forklift
@rogueplanet135 жыл бұрын
Why have you got jack shit in your warehouse?👀 (Genuine question)